MultiTech
Bleeding edge development version of the mDot library for mbed 5. This version of the library is not guaranteed to be stable or well tested and should not be used in production or deployment scenarios.
Dependents: mDot-IKS01A1 mDot-IKS01A1 mDot-Examples mDot-IKS01A1-Explora ... more
Fork of
libmDot-dev-mbed2-deprecated
by 
MultiTech
The Dot library provides a LoRaWan certified stack for LoRa communication using MultiTech mDot and xDot devices. The stack is compatible with mbed 5.
Dot Library Version 3 Updates
Dot Library versions 3.x.x require a channel plan to be injected into the stack. Channel plans are included with the 3.x.x Dot Library releases. The following code snippet demonstrates how to create a channel plan and inject it into the stack.
#include "mDot.h"
#include "channel_plans.h"
int main() {
ChannelPlan* plan = new lora::ChannelPlan_US915();
assert(plan);
mDot* dot = mDot::getInstance(plan);
assert(dot);
// ...
}
Dot devices must not be deployed with software using a different channel plan than the Dot's default plan! This functionality is for development and testing only!
Multicast Sessions
Multicast sessions and packet rx events in library. When in Class C mode Multicast downlinks can be received. Recieved packets should be filtered on address, counter value will be maintained in the session or can be set explicitly depending on Application support to share Multicast Address, Keys and Counters.
mDot.h
/**
* Add a multicast session address and keys
* Downlink counter is set to 0
* Up to 3 MULTICAST_SESSIONS can be set
*/
int32_t setMulticastSession(uint8_t index, uint32_t addr, const uint8_t* nsk, const uint8_t* dsk);
/**
* Set a multicast session counter
* Up to 3 MULTICAST_SESSIONS can be set
*/
int32_t setMulticastDownlinkCounter(uint8_t index, uint32_t count);
mDotEvent.h
The address field was added to PacketRx event.
virtual void PacketRx(uint8_t port, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr, lora::DownlinkControl ctrl, uint8_t slot, uint8_t retries, uint32_t address);
The name of the repository can be used to determine which device the stack was compiled for and if it's a development or production-ready build:
- libmDot-mbed5 -> production-ready build for mDot
- libmDot-dev-mbed5 -> development build for mDot
- libxDot-mbed5 -> production-ready build for xDot
- libxDot-dev-mbed5 -> development build for xDot
A changelog for the Dot library can be found here.
The Dot library version and the version of mbed-os it was compiled against can both be found in the commit message for that revision of the Dot library. Building your application with the same version of mbed-os as what was used to build the Dot library is highly recommended!
The Dot-Examples repository demonstrates how to use the Dot library in a custom application.
The mDot and xDot platform pages have lots of platform specific information and document potential issues, gotchas, etc, and provide instructions for getting started with development. Please take a look at the platform page before starting development as they should answer many questions you will have.
Diff: Lora.h
- Revision:
- 172:7ec44396a51b
- Parent:
- 157:8e9b1e84ffac
- Child:
- 178:8f7d93f3bbb5
--- a/Lora.h Wed Aug 08 09:33:35 2018 -0500
+++ b/Lora.h Thu Aug 30 09:05:16 2018 -0500
@@ -103,85 +103,14 @@
const uint16_t RX2_DELAY_OFFSET = 1000; //!< Delay between first and second window
const uint16_t RXC_OFFSET = 50; //!< Time between end of RXC after TX and RX1
- const uint8_t US915_125K_NUM_CHANS = 64; //!< Number of 125k channels in US915 channel plan
- const uint8_t US915_500K_NUM_CHANS = 8; //!< Number of 500k channels in US915 channel plan
-
- const uint32_t US915_125K_FREQ_BASE = 902300000; //!< Frequency base for 125k US915 uplink channels
- const uint32_t US915_125K_FREQ_STEP = 200000; //!< Frequency step for 125k US915 uplink channels
-
- const uint32_t US915_500K_FREQ_BASE = 903000000; //!< Frequency base for 500k US915 uplink channels
- const uint32_t US915_500K_FREQ_STEP = 1600000; //!< Frequency step for 500k US915 uplink channels
-
- const uint32_t US915_500K_DBASE = 923300000; //!< Frequency base for 500k US915 downlink channels
- const uint32_t US915_500K_DSTEP = 600000; //!< Frequency step for 500k US915 downlink channels
-
- const uint32_t US915_FREQ_MIN = 902000000;
- const uint32_t US915_FREQ_MAX = 928000000;
-
- const uint8_t US915_MIN_DATARATE = (uint8_t) DR_0; //!< Minimum transmit datarate for US915
- const uint8_t US915_MAX_DATARATE = (uint8_t) DR_4; //!< Maximum transmit datarate for US915
-
- const uint8_t US915_MIN_DATARATE_OFFSET = (uint8_t) 0; //!< Minimum transmit datarate for US915
- const uint8_t US915_MAX_DATARATE_OFFSET = (uint8_t) 3; //!< Maximum transmit datarate for US915
-
- const uint8_t AU915_125K_NUM_CHANS = 64; //!< Number of 125k channels in AU915 channel plan
- const uint8_t AU915_500K_NUM_CHANS = 8; //!< Number of 500k channels in AU915 channel plan
-
- const uint32_t AU915_125K_FREQ_BASE = 915200000; //!< Frequency base for 125k AU915 uplink channels
- const uint32_t AU915_125K_FREQ_STEP = 200000; //!< Frequency step for 125k AU915 uplink channels
-
- const uint32_t AU915_500K_FREQ_BASE = 915900000; //!< Frequency base for 500k AU915 uplink channels
- const uint32_t AU915_500K_FREQ_STEP = 1600000; //!< Frequency step for 500k AU915 uplink channels
-
- const uint32_t AU915_500K_DBASE = 923300000; //!< Frequency base for 500k AU915 downlink channels
- const uint32_t AU915_500K_DSTEP = 600000; //!< Frequency step for 500k AU915 downlink channels
-
- const uint32_t AU915_FREQ_MIN = 915000000;
- const uint32_t AU915_FREQ_MAX = 928000000;
-
- const uint8_t AU915_MIN_DATARATE = (uint8_t) DR_0; //!< Minimum transmit datarate for AU915
- const uint8_t AU915_MAX_DATARATE = (uint8_t) DR_6; //!< Maximum transmit datarate for AU915
-
- const uint8_t AU915_MIN_DATARATE_OFFSET = (uint8_t) 0; //!< Minimum transmit datarate for AU915
- const uint8_t AU915_MAX_DATARATE_OFFSET = (uint8_t) 5; //!< Maximum transmit datarate for AU915
-
- const uint8_t EU868_125K_NUM_CHANS = 16; //!< Number of 125k channels in EU868 channel plan
- const uint8_t EU868_DEFAULT_NUM_CHANS = 3; //!< Number of defualt channels in EU868 channel plan
- const uint32_t EU868_125K_FREQ_BASE = 868100000; //!< Frequency base for 125k EU868 uplink channels
- const uint32_t EU868_125K_FREQ_STEP = 200000; //!< Frequency step for 125k EU868 uplink channels
- const uint32_t EU868_RX2_FREQ = 869525000; //!< Frequency default for second rx window in EU868
-
- const uint8_t EU868_TX_POWER_MAX = 14; //!< Max power for EU868 channel plan
-
- // 0.1% duty cycle 863-868
- // Limiting to 865-868 allows for 1% duty cycle
- const uint32_t EU868_MILLI_FREQ_MIN = 865000000;
- const uint32_t EU868_MILLI_FREQ_MAX = 868000000;
-
- const uint32_t EU868_MILLI_1_FREQ_MIN = 868700000;
- const uint32_t EU868_MILLI_1_FREQ_MAX = 869200000;
-
- // 1% duty cycle
- const uint32_t EU868_CENTI_FREQ_MIN = 868000000;
- const uint32_t EU868_CENTI_FREQ_MAX = 868600000;
-
- // 10% duty cycle
- const uint32_t EU868_DECI_FREQ_MIN = 869400000;
- const uint32_t EU868_DECI_FREQ_MAX = 869650000;
-
- // Below 7dBm there is no duty cycle for these frequencies
- // Up to 14dBm there is 1% duty cycle
- const uint32_t EU868_VAR_FREQ_MIN = 869700000;
- const uint32_t EU868_VAR_FREQ_MAX = 870000000;
-
- const uint32_t EU868_FREQ_MIN = 863000000;
- const uint32_t EU868_FREQ_MAX = 870000000;
-
- const uint8_t EU868_MIN_DATARATE = (uint8_t) DR_0; //!< Minimum transmit datarate for EU868
- const uint8_t EU868_MAX_DATARATE = (uint8_t) DR_7; //!< Maximum transmit datarate for EU868
-
- const uint8_t EU868_MIN_DATARATE_OFFSET = (uint8_t) 0; //!< Minimum transmit datarate for US915
- const uint8_t EU868_MAX_DATARATE_OFFSET = (uint8_t) 5; //!< Maximum transmit datarate for US915
+ const uint16_t BEACON_PREAMBLE_LENGTH = 10U; //!< Beacon preamble length
+ const uint16_t DEFAULT_BEACON_PERIOD = 128U; //!< Default period of the beacon (in seconds)
+ const uint16_t PING_SLOT_LENGTH = 30U; //!< Duration of each class B ping slot (in milliseconds)
+ const uint16_t BEACON_RESERVED_TIME = 2120U; //!< Time reserved for beacon broadcast (in milliseconds)
+ const uint16_t BEACON_GUARD_TIME = 3000U; //!< Guard time before beacon transmission where no ping slots can be scheduled (in milliseconds)
+ const uint32_t MAX_BEACONLESS_OP_TIME = 7200U; //!< Maximum time to operate in class B since last beacon received (in seconds)
+ const uint16_t MAX_CLASS_B_WINDOW_GROWTH = 3U; //!< Maximum window growth factor for beacons and ping slots in beacon-less operation
+ const uint16_t DEFAULT_PING_NB = 1U; //!< Default number of ping slots per beacon interval
const int16_t DEFAULT_FREE_CHAN_RSSI_THRESHOLD = -90; //!< Threshold for channel activity detection (CAD) dBm
@@ -307,18 +236,27 @@
/**
- * Received window used by Link
+ * Receive window used by Link
*/
enum ReceiveWindows {
RX_1 = 1, //!< First receive window
RX_2, //!< Second receive window
RX_BEACON, //!< Beacon receive window
- RX_SLOT, //!< Ping Slot receive window
+ RX_SLOT, //!< Ping slot receive window
RXC, //!< Class C continuous window
RX_TEST
};
/**
+ * Beacon info descriptors for the GwSpecific Info field
+ */
+ enum BeaconInfoDesc {
+ GPS_FIRST_ANTENNA = 0, //!< GPS coordinates of the gateway's first antenna
+ GPS_SECOND_ANTENNA, //!< GPS coordinates of the gateway's second antenna
+ GPS_THIRD_ANTENNA, //!< GPS coordinates of the gateway's third antenna
+ };
+
+ /**
* Datarate range for a Channel
*/
typedef union {
@@ -342,6 +280,7 @@
uint8_t TxIQ;
uint8_t RxIQ;
uint8_t SymbolTimeout();
+ float Timeout();
Datarate();
} Datarate;
@@ -376,6 +315,16 @@
} DutyBand;
/**
+ * Beacon data content (w/o CRCs and RFUs)
+ */
+ typedef struct {
+ uint32_t Time;
+ uint8_t InfoDesc;
+ uint32_t Latitude;
+ uint32_t Longitude;
+ } BeaconData_t;
+
+ /**
* Device configuration
*/
typedef struct {
@@ -405,12 +354,13 @@
uint32_t TxFrequency; //!< Frequency for P2P transmit
int8_t AntennaGain; //!< Antenna Gain
uint8_t DisableEncryption; //!< Disable Encryption
- uint8_t DisableCRC; //!< Disable CRC on uplink packets
+ uint8_t DisableCRC; //!< Disable CRC on uplink packets
uint16_t P2PACKTimeout;
uint16_t P2PACKBackoff;
uint8_t JoinRx1DatarateOffset; //!< Offset for datarate for first window
uint32_t JoinRx2Frequency; //!< Frequency used in second window
uint8_t JoinRx2DatarateIndex; //!< Datarate for second window
+ uint8_t PingPeriodicity; //!< Number of ping slots to open in a beacon interval (2^(7-PingPeriodicity))
} NetworkConfig;
/**
@@ -419,9 +369,14 @@
*/
typedef struct {
uint8_t Joined; //!< State of session
+ uint8_t Class; //!< Operating class of device
uint8_t Rx1DatarateOffset; //!< Offset for datarate for first window
uint32_t Rx2Frequency; //!< Frequency used in second window
uint8_t Rx2DatarateIndex; //!< Datarate for second window
+ uint32_t BeaconFrequency; //!< Frequency used for the beacon window
+ uint8_t BeaconDatarateIndex; //!< Datarate for the beacon
+ uint32_t PingSlotFrequency; //!< Frequency used for ping slot windows
+ uint8_t PingSlotDatarateIndex; //!< Datarate for the ping slots
uint8_t TxPower; //!< Current total radiated output power in dBm
uint8_t TxDatarate; //!< Current datarate can be changed when ADR is enabled
uint32_t Address; //!< Network address
@@ -611,13 +566,16 @@
MOTE_MAC_RX_TIMING_SETUP_ANS = 0x08,
MOTE_MAC_TX_PARAM_SETUP_ANS = 0x09,
MOTE_MAC_DL_CHANNEL_ANS = 0x0A,
+ MOTE_MAC_REKEY_IND = 0x0B,
+ MOTE_MAC_ADR_PARAM_SETUP_ANS = 0x0C,
+ MOTE_MAC_DEVICE_TIME_REQ = 0x0D,
+ MOTE_MAC_REJOIN_PARAM_SETUP_ANS = 0x0F,
/* Class B */
- MOTE_MAC_PING_SLOT_INFO_REQ = 0x0B,
- MOTE_MAC_PING_SLOT_FREQ_ANS = 0x0C,
- MOTE_MAC_PING_SLOT_CHANNEL_ANS = 0x0D,
- MOTE_MAC_BEACON_TIMING_REQ = 0x0E,
- MOTE_MAC_BEACON_FREQ_ANS = 0x0F,
+ MOTE_MAC_PING_SLOT_INFO_REQ = 0x10,
+ MOTE_MAC_PING_SLOT_CHANNEL_ANS = 0x11,
+ MOTE_MAC_BEACON_TIMING_REQ = 0x12,
+ MOTE_MAC_BEACON_FREQ_ANS = 0x13,
/* Multitech */
MOTE_MAC_PING_REQ = 0x80,
@@ -643,13 +601,17 @@
SRV_MAC_RX_TIMING_SETUP_REQ = 0x08,
SRV_MAC_TX_PARAM_SETUP_REQ = 0x09,
SRV_MAC_DL_CHANNEL_REQ = 0x0A,
+ SRV_MAC_REKEY_CONF = 0x0B,
+ SRV_MAC_ADR_PARAM_SETUP_REQ = 0x0C,
+ SRV_MAC_DEVICE_TIME_ANS = 0x0D,
+ SRV_MAC_FORCE_REJOIN_REQ = 0x0E,
+ SRV_MAC_REJOIN_PARAM_SETUP_REQ = 0x0F,
/* Class B */
- SRV_MAC_PING_SLOT_INFO_ANS = 0x0B,
- SRV_MAC_PING_SLOT_FREQ_REQ = 0x0C,
- SRV_MAC_PING_SLOT_CHANNEL_REQ = 0x0D,
- SRV_MAC_BEACON_TIMING_ANS = 0x0E,
- SRV_MAC_BEACON_FREQ_REQ = 0x0F,
+ SRV_MAC_PING_SLOT_INFO_ANS = 0x10,
+ SRV_MAC_PING_SLOT_CHANNEL_REQ = 0x11,
+ SRV_MAC_BEACON_TIMING_ANS = 0x12,
+ SRV_MAC_BEACON_FREQ_REQ = 0x13,
/* Multitech */
SRV_MAC_PING_ANS = 0x80,
@@ -662,6 +624,15 @@
} ServerCommand;
/**
+ * Radio configuration options
+ */
+ typedef enum RadioCfg {
+ NO_RADIO_CFG,
+ TX_RADIO_CFG,
+ RX_RADIO_CFG
+ } RadioCfg_t;
+
+ /**
* Random seed for software RNG
*/
void srand(uint32_t seed);
