Diff: main.cpp

Revision:

3:85181c1324f2

Parent:

2:e20a75d47720

Child:

4:09d5f99b94b1

--- a/main.cpp	Tue Aug 05 14:43:29 2014 +0000
+++ b/main.cpp	Thu Aug 07 21:29:51 2014 +0000
@@ -5,7 +5,8 @@
     //Modify to match your apn if you are using an HSPA radio with a SIM card
     const char APN[] = "";
     
-    /* Sets the log level for INFO level. INFO is a midway log level, available levels are: TRACE, DEBUG, INFO, WARNING, ERROR, FATAL, NONE */
+    //Sets the log level to INFO, higher log levels produce more log output.
+    //Possible levels: NONE, FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
     MTSLog::setLogLevel(MTSLog::INFO_LEVEL);
     
     //Receive buffer
@@ -26,17 +27,13 @@
     
     /** Freescale KL46Z
     * To configure the pins for the Freescale KL46Z board, use configuration B
-    * for the SocketModem. The TX pin should be jumped to pin D2 (JP8), and the
-    * RX pin should be jumped to pin D9 (JP9). 
-    * Uncomment te following line to use the Freescale KL46Z board
+    * Uncomment the following line to use the Freescale KL46Z board
     */
     //MTSSerialFlowControl* io = new MTSSerialFlowControl(D2, D9, D3, D6);
     
-    /** Freescale KL64F
+    /** Freescale K64F
     * To configure the pins for the Freescale KL46Z board, use configuration A
-    * for the SocketModem. The TX pin should be jumped to pin D1 (JP8), and the
-    * RX pin should be jumped to pin D0 (JP9). 
-    * Uncomment te following line to use the Freescale KL46F board
+    * Uncomment the following line to use the Freescale KL46F board
     */
     //MTSSerialFlowControl* io = new MTSSerialFlowControl(D1, D0, D3, D6);
     
@@ -47,19 +44,40 @@
     Cellular* radio = CellularFactory::create(io);
     if( ! radio) {
         logFatal("Radio initialization failed");
+        return 1;
     }
     radio->configureSignals(D4,D7,RESET);
     Transport::setTransport(radio);
     
     //Set up HTTP interface
     HTTPClient* http = new HTTPClient();
-    HTTPText* receive = new HTTPText(rbuf);
+    HTTPText* receive = new HTTPText(rbuf, 4000);
     
-    //Set APN value
-    radio->setApn(APN);
+    //Set radio APN
+    for (int i = 0; i < 10; i++) {
+        if (i >= 10) {
+            logError("Failed to set APN to %s", APN);
+        }
+        if (radio->setApn(APN) == MTS_SUCCESS) {
+            logInfo("Successfully set APN to %s", APN);
+            break;
+        } else {
+            wait(1);
+        }
+    }
     
     //Establish PPP link
-    radio->connect();
+    for (int i = 0; i < 10; i++) {
+        if (i >= 10) {
+            logError("Failed to establish PPP link");
+        }
+        if (radio->connect() == true) {
+            logInfo("Successfully established PPP link");
+            break;
+        } else {
+            wait(1);
+        }
+    }
     
     //Format HTTP Get request
     url = base_url + url_get;
@@ -68,7 +86,7 @@
     for (int i = 0; i < 10; i++) {
         if(http->get(url.c_str(), receive, 5000) == HTTP_OK) {
             http->get(url.c_str(), receive, 5000);
-            logInfo("HTTP get succeeded");
+            logInfo("HTTP get succeeded\n%s",  rbuf);
             break;
         }
         if (i >= 10) {