Diff: main.cpp

Revision:

0:47bc9ce390cc

Child:

1:4c54ec0a3a20

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Jul 24 18:56:55 2014 +0000
@@ -0,0 +1,50 @@
+#include "mbed.h"
+#include "mtsas.h"
+
+int main(){
+    //Modify to match your apn if you are using an HSPA radio with a SIM card
+    const char APN[] = "";
+    
+    /** STMicro Nucelo F401RE
+    * The supported jumper configurations of the MTSAS do not line up with
+    * the pin mapping of the Nucleo F401RE. Therefore, the MTSAS serial TX
+    * pin (JP8 Pin 2) must be manually jumped to Serial1 RX (Shield pin D2)
+    * and the MTSAS serial RX pin (JP9 Pin 2) pin must be manually jumped to
+    * Serial1 TX (Shield pin D8).
+    * Uncomment the following line to use the STMicro Nuceleo F401RE
+    */
+    MTSSerialFlowControl* io = new MTSSerialFlowControl(D8, D2, D3, D6);
+    
+    /** Freescale KL46Z
+    * To configure the pins for the Freescale KL46Z board, use configuration B
+    * for the SocketModem. The TX pin should be jumped to pin D2 (JP8), and the
+    * RX pin should be jumped to pin D9 (JP9). 
+    * Uncomment te following line to use the Freescale KL46Z board
+    */
+    //MTSSerialFlowControl* io = new MTSSerialFlowControl(D2, D9, D3, D6);
+    
+    /** Freescale KL64F
+    * To configure the pins for the Freescale KL46Z board, use configuration A
+    * for the SocketModem. The TX pin should be jumped to pin D1 (JP8), and the
+    * RX pin should be jumped to pin D0 (JP9). 
+    * Uncomment te following line to use the Freescale KL46F board
+    */
+    //MTSSerialFlowControl* io = new MTSSerialFlowControl(D1, D0, D3, D6);
+    
+    //Sets the baudrate for communicating with the radio
+    io->baud(115200); 
+    
+    Cellular* radio = CellularFactory::create(io);
+    radio->setApn(APN); 
+    
+    //Establish PPP link
+    radio->connect();
+    
+    printf("Ping was %s\n", radio->ping() ? "successful" : "unsuccessful"); 
+    
+    //Disconnect ppp link
+    radio->disconnect();
+    
+    printf("End of example code\n");
+    return 0;
+}
\ No newline at end of file