MultiTech / Mbed OS MTDOT-BOX-EVB-Factory-Firmware

Factory firmware for the MultiTech Dotbox (MTDOT-BOX) and EVB (MTDOT-EVB) products.

Dependencies:   NCP5623B GpsParser ISL29011 libmDot-mbed5 MTS-Serial MMA845x DOGS102 MPL3115A2

MTDOT-BOX/EVB Firmware Description

This Firmware is what ships on DotBox and EVB devices. It is intended to be used as a proof of concept and site survey tool for planning LoRa deployments. The firmware provides a number of different modes of operation:

  • Configuration - Use AT commands to configure network credentials, TX power, TX data rate, view the survey data file, etc.
  • Survey Single - Test network connectivity at current location at a specific TX power and TX data rate. Uplink information, downlink information, and GPS information are saved to the survey data file and can also be sent to the gateway.
  • Survey Sweep - Test network connectivity at current location across a range of TX powers and TX data rates. Uplink information, downlink information, and GPS information for each survey in the sweep are saved to the survey data file and can also be sent to the gateway.
  • LoRa Demo - Gather data from onboard sensors and display it on the screen in real time. Send packets containing sensor data to the gateway either on an interval or when triggered by the user. GPS data is not transmitted.
  • Survey GPS - Gather sensor and GPS data and transmit it to the gateway either on an interval or when triggered by the user. Add padding to packets, switch frequency sub bands, TX power, TX data rate, and more all without exiting Survey GPS Mode.
  • View Data - View the survey data file on the screen one survey at a time.

Additional documentation and information for the MTDOT-BOX/EVB Factory Firmware can be found here.


Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Development library for mDot.

[Repository '/teams/MultiTech/code/libmDot-dev-mbed5/' not found]

Stable library for mDot.

Import librarylibmDot-mbed5

Stable version of the mDot library for mbed 5. This version of the library is suitable for deployment scenarios. See lastest commit message for version of mbed-os library that has been tested against.

Last commit 25 Mar 2020 by MultiTech

ButtonHandler/ButtonHandler.h@16:e76cec0eec43, 2019-03-14 (annotated)

Committer:
jenkins@jenkinsdm1
Date:
Thu Mar 14 08:23:20 2019 -0500
Revision:
16:e76cec0eec43
Parent:
1:71125aa00e33 
dotbox-firmware revision 3.1.2

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:71125aa00e33 1 /* Copyright (c) <2016> <MultiTech Systems>, MIT License
Mike Fiore 1:71125aa00e33 2 *
Mike Fiore 1:71125aa00e33 3 * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
Mike Fiore 1:71125aa00e33 4 * and associated documentation files (the "Software"), to deal in the Software without restriction,
Mike Fiore 1:71125aa00e33 5 * including without limitation the rights to use, copy, modify, merge, publish, distribute,
Mike Fiore 1:71125aa00e33 6 * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
Mike Fiore 1:71125aa00e33 7 * furnished to do so, subject to the following conditions:
Mike Fiore 1:71125aa00e33 8 *
Mike Fiore 1:71125aa00e33 9 * The above copyright notice and this permission notice shall be included in all copies or
Mike Fiore 1:71125aa00e33 10 * substantial portions of the Software.
Mike Fiore 1:71125aa00e33 11 *
Mike Fiore 1:71125aa00e33 12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
Mike Fiore 1:71125aa00e33 13 * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
Mike Fiore 1:71125aa00e33 14 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
Mike Fiore 1:71125aa00e33 15 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
Mike Fiore 1:71125aa00e33 16 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Mike Fiore 1:71125aa00e33 17 */
Mike Fiore 1:71125aa00e33 18
Mike Fiore 1:71125aa00e33 19 #ifndef __BUTTONHANDLER_H__
Mike Fiore 1:71125aa00e33 20 #define __BUTTONHANDLER_H__
Mike Fiore 1:71125aa00e33 21
Mike Fiore 1:71125aa00e33 22 #include "mbed.h"
Mike Fiore 1:71125aa00e33 23 #include "rtos.h"
Mike Fiore 1:71125aa00e33 24
Mike Fiore 1:71125aa00e33 25 #define buttonSignal (int32_t)0x01
Mike Fiore 1:71125aa00e33 26
Mike Fiore 1:71125aa00e33 27 class ButtonHandler {
Mike Fiore 1:71125aa00e33 28 public:
Mike Fiore 1:71125aa00e33 29 typedef enum {
Mike Fiore 1:71125aa00e33 30 none = 0,
Mike Fiore 1:71125aa00e33 31 sw1_press,
Mike Fiore 1:71125aa00e33 32 sw1_hold,
Mike Fiore 1:71125aa00e33 33 sw2_press
Mike Fiore 1:71125aa00e33 34 } ButtonEvent;
Mike Fiore 1:71125aa00e33 35
Mike Fiore 1:71125aa00e33 36 ButtonHandler(osThreadId main);
Mike Fiore 1:71125aa00e33 37 ~ButtonHandler();
Mike Fiore 1:71125aa00e33 38
Mike Fiore 1:71125aa00e33 39 ButtonEvent getButtonEvent();
Mike Fiore 1:71125aa00e33 40
Mike Fiore 1:71125aa00e33 41 void sw1_fall();
Mike Fiore 1:71125aa00e33 42 void sw1_rise();
Mike Fiore 1:71125aa00e33 43 void sw2_fall();
Mike Fiore 1:71125aa00e33 44 void sw2_rise();
Mike Fiore 1:71125aa00e33 45
Mike Fiore 1:71125aa00e33 46 osThreadId _main;
Mike Fiore 1:71125aa00e33 47 Thread _thread;
Mike Fiore 1:71125aa00e33 48 InterruptIn _sw1;
Mike Fiore 1:71125aa00e33 49 InterruptIn _sw2;
Mike Fiore 1:71125aa00e33 50 Timer _sw1_timer;
Mike Fiore 1:71125aa00e33 51 Timer _sw2_timer;
Mike Fiore 1:71125aa00e33 52 time_t _sw1_time;
Mike Fiore 1:71125aa00e33 53 time_t _sw2_time;
Mike Fiore 1:71125aa00e33 54 bool _sw1_running;
Mike Fiore 1:71125aa00e33 55 bool _sw2_running;
Mike Fiore 1:71125aa00e33 56 ButtonEvent _event;
Mike Fiore 1:71125aa00e33 57 time_t _debounce_time;
Mike Fiore 1:71125aa00e33 58 time_t _hold_threshold;
Mike Fiore 1:71125aa00e33 59 };
Mike Fiore 1:71125aa00e33 60
Mike Fiore 1:71125aa00e33 61 #endif