MultiTech / Mbed OS MTDOT-BOX-EVB-Factory-Firmware

Factory firmware for the MultiTech Dotbox (MTDOT-BOX) and EVB (MTDOT-EVB) products.

Dependencies:   NCP5623B GpsParser ISL29011 libmDot-mbed5 MTS-Serial MMA845x DOGS102 MPL3115A2

MTDOT-BOX/EVB Firmware Description

This Firmware is what ships on DotBox and EVB devices. It is intended to be used as a proof of concept and site survey tool for planning LoRa deployments. The firmware provides a number of different modes of operation:

  • Configuration - Use AT commands to configure network credentials, TX power, TX data rate, view the survey data file, etc.
  • Survey Single - Test network connectivity at current location at a specific TX power and TX data rate. Uplink information, downlink information, and GPS information are saved to the survey data file and can also be sent to the gateway.
  • Survey Sweep - Test network connectivity at current location across a range of TX powers and TX data rates. Uplink information, downlink information, and GPS information for each survey in the sweep are saved to the survey data file and can also be sent to the gateway.
  • LoRa Demo - Gather data from onboard sensors and display it on the screen in real time. Send packets containing sensor data to the gateway either on an interval or when triggered by the user. GPS data is not transmitted.
  • Survey GPS - Gather sensor and GPS data and transmit it to the gateway either on an interval or when triggered by the user. Add padding to packets, switch frequency sub bands, TX power, TX data rate, and more all without exiting Survey GPS Mode.
  • View Data - View the survey data file on the screen one survey at a time.

Additional documentation and information for the MTDOT-BOX/EVB Factory Firmware can be found here.


Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Development library for mDot.

[Repository '/teams/MultiTech/code/libmDot-dev-mbed5/' not found]

Stable library for mDot.

Import librarylibmDot-mbed5

Stable version of the mDot library for mbed 5. This version of the library is suitable for deployment scenarios. See lastest commit message for version of mbed-os library that has been tested against.

Last commit 25 Mar 2020 by MultiTech

Layout/LayoutScrollSelect.cpp@1:71125aa00e33, 2016-02-04 (annotated)

Committer:
Mike Fiore
Date:
Thu Feb 04 12:36:36 2016 -0600
Revision:
1:71125aa00e33
Child:
12:05435282f899
add rest of source - version 2.0.0

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:71125aa00e33 1 /* Copyright (c) <2016> <MultiTech Systems>, MIT License
Mike Fiore 1:71125aa00e33 2 *
Mike Fiore 1:71125aa00e33 3 * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
Mike Fiore 1:71125aa00e33 4 * and associated documentation files (the "Software"), to deal in the Software without restriction,
Mike Fiore 1:71125aa00e33 5 * including without limitation the rights to use, copy, modify, merge, publish, distribute,
Mike Fiore 1:71125aa00e33 6 * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
Mike Fiore 1:71125aa00e33 7 * furnished to do so, subject to the following conditions:
Mike Fiore 1:71125aa00e33 8 *
Mike Fiore 1:71125aa00e33 9 * The above copyright notice and this permission notice shall be included in all copies or
Mike Fiore 1:71125aa00e33 10 * substantial portions of the Software.
Mike Fiore 1:71125aa00e33 11 *
Mike Fiore 1:71125aa00e33 12 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
Mike Fiore 1:71125aa00e33 13 * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
Mike Fiore 1:71125aa00e33 14 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
Mike Fiore 1:71125aa00e33 15 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
Mike Fiore 1:71125aa00e33 16 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Mike Fiore 1:71125aa00e33 17 */
Mike Fiore 1:71125aa00e33 18
Mike Fiore 1:71125aa00e33 19 #include "LayoutScrollSelect.h"
Mike Fiore 1:71125aa00e33 20 #include "MTSLog.h"
Mike Fiore 1:71125aa00e33 21
Mike Fiore 1:71125aa00e33 22 LayoutScrollSelect::LayoutScrollSelect(DOGS102* lcd, Items items, std::string info1, std::string info2)
Mike Fiore 1:71125aa00e33 23 : Layout(lcd),
Mike Fiore 1:71125aa00e33 24 _lSw1(0, 7, "Scroll"),
Mike Fiore 1:71125aa00e33 25 _lSw2(11, 7, "Select"),
Mike Fiore 1:71125aa00e33 26 _lInfo1(0, 0, info1),
Mike Fiore 1:71125aa00e33 27 _lInfo2(0, 1, info2),
Mike Fiore 1:71125aa00e33 28 _lCursor(0, 4, "=>"),
Mike Fiore 1:71125aa00e33 29 _fItem1(3, 2, 14),
Mike Fiore 1:71125aa00e33 30 _fItem2(3, 3, 14),
Mike Fiore 1:71125aa00e33 31 _fItem3(3, 4, 14),
Mike Fiore 1:71125aa00e33 32 _fItem4(3, 5, 14),
Mike Fiore 1:71125aa00e33 33 _fItem5(3, 6, 14),
Mike Fiore 1:71125aa00e33 34 _items(items)
Mike Fiore 1:71125aa00e33 35 {
Mike Fiore 1:71125aa00e33 36 _size = _items.size();
Mike Fiore 1:71125aa00e33 37 _selected = 0;
Mike Fiore 1:71125aa00e33 38 }
Mike Fiore 1:71125aa00e33 39
Mike Fiore 1:71125aa00e33 40 LayoutScrollSelect::~LayoutScrollSelect() {}
Mike Fiore 1:71125aa00e33 41
Mike Fiore 1:71125aa00e33 42 void LayoutScrollSelect::display() {
Mike Fiore 1:71125aa00e33 43 clear();
Mike Fiore 1:71125aa00e33 44 startUpdate();
Mike Fiore 1:71125aa00e33 45
Mike Fiore 1:71125aa00e33 46 writeLabel(_lSw1);
Mike Fiore 1:71125aa00e33 47 writeLabel(_lSw2);
Mike Fiore 1:71125aa00e33 48 writeLabel(_lInfo1);
Mike Fiore 1:71125aa00e33 49 writeLabel(_lInfo2);
Mike Fiore 1:71125aa00e33 50 writeLabel(_lCursor);
Mike Fiore 1:71125aa00e33 51
Mike Fiore 1:71125aa00e33 52 switch (_size) {
Mike Fiore 1:71125aa00e33 53 case 0:
Mike Fiore 1:71125aa00e33 54 // special case - no items
Mike Fiore 1:71125aa00e33 55 // (empty)
Mike Fiore 1:71125aa00e33 56 // (empty)
Mike Fiore 1:71125aa00e33 57 // => (empty)
Mike Fiore 1:71125aa00e33 58 // (empty)
Mike Fiore 1:71125aa00e33 59 // (empty)
Mike Fiore 1:71125aa00e33 60 break;
Mike Fiore 1:71125aa00e33 61
Mike Fiore 1:71125aa00e33 62 case 1:
Mike Fiore 1:71125aa00e33 63 // special case - 1 item
Mike Fiore 1:71125aa00e33 64 // (empty)
Mike Fiore 1:71125aa00e33 65 // (empty)
Mike Fiore 1:71125aa00e33 66 // => item1
Mike Fiore 1:71125aa00e33 67 // (empty)
Mike Fiore 1:71125aa00e33 68 // (empty)
Mike Fiore 1:71125aa00e33 69 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 70 break;
Mike Fiore 1:71125aa00e33 71
Mike Fiore 1:71125aa00e33 72 case 2:
Mike Fiore 1:71125aa00e33 73 // special case - 2 items
Mike Fiore 1:71125aa00e33 74 // (empty)
Mike Fiore 1:71125aa00e33 75 // (empty)
Mike Fiore 1:71125aa00e33 76 // => item1
Mike Fiore 1:71125aa00e33 77 // item2
Mike Fiore 1:71125aa00e33 78 // (empty)
Mike Fiore 1:71125aa00e33 79 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 80 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 81 break;
Mike Fiore 1:71125aa00e33 82
Mike Fiore 1:71125aa00e33 83 case 3:
Mike Fiore 1:71125aa00e33 84 // special case - 3 items
Mike Fiore 1:71125aa00e33 85 // (empty)
Mike Fiore 1:71125aa00e33 86 // item3
Mike Fiore 1:71125aa00e33 87 // => item1
Mike Fiore 1:71125aa00e33 88 // item2
Mike Fiore 1:71125aa00e33 89 // (empty)
Mike Fiore 1:71125aa00e33 90 writeField(_fItem2, _items[2]);
Mike Fiore 1:71125aa00e33 91 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 92 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 93 break;
Mike Fiore 1:71125aa00e33 94
Mike Fiore 1:71125aa00e33 95 case 4:
Mike Fiore 1:71125aa00e33 96 // special case - 4 items
Mike Fiore 1:71125aa00e33 97 // item3
Mike Fiore 1:71125aa00e33 98 // item4
Mike Fiore 1:71125aa00e33 99 // => item1
Mike Fiore 1:71125aa00e33 100 // item2
Mike Fiore 1:71125aa00e33 101 // (empty)
Mike Fiore 1:71125aa00e33 102 writeField(_fItem1, _items[2]);
Mike Fiore 1:71125aa00e33 103 writeField(_fItem2, _items[3]);
Mike Fiore 1:71125aa00e33 104 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 105 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 106 break;
Mike Fiore 1:71125aa00e33 107
Mike Fiore 1:71125aa00e33 108 default:
Mike Fiore 1:71125aa00e33 109 // this is the generic case - should handle lists of 5+ items correctly
Mike Fiore 1:71125aa00e33 110 // item4 item6 item9
Mike Fiore 1:71125aa00e33 111 // item5 item7 item10
Mike Fiore 1:71125aa00e33 112 // => item1 => item1 => item1
Mike Fiore 1:71125aa00e33 113 // item2 item2 item2
Mike Fiore 1:71125aa00e33 114 // item3 item3 item3
Mike Fiore 1:71125aa00e33 115 writeField(_fItem1, _items[_size - 2]);
Mike Fiore 1:71125aa00e33 116 writeField(_fItem2, _items[_size - 1]);
Mike Fiore 1:71125aa00e33 117 writeField(_fItem3, _items[0]);
Mike Fiore 1:71125aa00e33 118 writeField(_fItem4, _items[1]);
Mike Fiore 1:71125aa00e33 119 writeField(_fItem5, _items[2]);
Mike Fiore 1:71125aa00e33 120 break;
Mike Fiore 1:71125aa00e33 121 }
Mike Fiore 1:71125aa00e33 122
Mike Fiore 1:71125aa00e33 123 endUpdate();
Mike Fiore 1:71125aa00e33 124 }
Mike Fiore 1:71125aa00e33 125
Mike Fiore 1:71125aa00e33 126 void LayoutScrollSelect::scroll() {
Mike Fiore 1:71125aa00e33 127 size_t index;
Mike Fiore 1:71125aa00e33 128
Mike Fiore 1:71125aa00e33 129 switch (_size) {
Mike Fiore 1:71125aa00e33 130 case 0:
Mike Fiore 1:71125aa00e33 131 case 1:
Mike Fiore 1:71125aa00e33 132 // nothing to scroll
Mike Fiore 1:71125aa00e33 133 break;
Mike Fiore 1:71125aa00e33 134
Mike Fiore 1:71125aa00e33 135 case 2:
Mike Fiore 1:71125aa00e33 136 // special case - 2 items
Mike Fiore 1:71125aa00e33 137 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 138 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 139 // => item1 -> => item2
Mike Fiore 1:71125aa00e33 140 // item2 -> item1
Mike Fiore 1:71125aa00e33 141 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 142
Mike Fiore 1:71125aa00e33 143 index = _selected;
Mike Fiore 1:71125aa00e33 144 // keep selected item up to date
Mike Fiore 1:71125aa00e33 145 increment(_selected);
Mike Fiore 1:71125aa00e33 146
Mike Fiore 1:71125aa00e33 147 startUpdate();
Mike Fiore 1:71125aa00e33 148 // previously selected item moves down to field4
Mike Fiore 1:71125aa00e33 149 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 150 increment(index);
Mike Fiore 1:71125aa00e33 151 // other item moves up to field3
Mike Fiore 1:71125aa00e33 152 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 153 endUpdate();
Mike Fiore 1:71125aa00e33 154 break;
Mike Fiore 1:71125aa00e33 155
Mike Fiore 1:71125aa00e33 156 case 3:
Mike Fiore 1:71125aa00e33 157 // special case - 3 items
Mike Fiore 1:71125aa00e33 158 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 159 // item3 -> item1
Mike Fiore 1:71125aa00e33 160 // => item1 -> => item2
Mike Fiore 1:71125aa00e33 161 // item2 -> item3
Mike Fiore 1:71125aa00e33 162 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 163
Mike Fiore 1:71125aa00e33 164 index = _selected;
Mike Fiore 1:71125aa00e33 165 // keep selected item up to date
Mike Fiore 1:71125aa00e33 166 increment(_selected);
Mike Fiore 1:71125aa00e33 167
Mike Fiore 1:71125aa00e33 168 startUpdate();
Mike Fiore 1:71125aa00e33 169 // previously selected item moves up to field2
Mike Fiore 1:71125aa00e33 170 writeField(_fItem2, _items[index]);
Mike Fiore 1:71125aa00e33 171 increment(index);
Mike Fiore 1:71125aa00e33 172 // new selected item moves up to field3
Mike Fiore 1:71125aa00e33 173 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 174 increment(index);
Mike Fiore 1:71125aa00e33 175 // item from field2 moves down to field4
Mike Fiore 1:71125aa00e33 176 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 177 endUpdate();
Mike Fiore 1:71125aa00e33 178 break;
Mike Fiore 1:71125aa00e33 179
Mike Fiore 1:71125aa00e33 180 case 4:
Mike Fiore 1:71125aa00e33 181 // special case - 4 items
Mike Fiore 1:71125aa00e33 182 // item3 -> item4
Mike Fiore 1:71125aa00e33 183 // item4 -> item1
Mike Fiore 1:71125aa00e33 184 // => item1 -> => item2
Mike Fiore 1:71125aa00e33 185 // item2 -> item3
Mike Fiore 1:71125aa00e33 186 // (empty) -> (empty)
Mike Fiore 1:71125aa00e33 187
Mike Fiore 1:71125aa00e33 188 index = _selected;
Mike Fiore 1:71125aa00e33 189 // keep selected item up to date
Mike Fiore 1:71125aa00e33 190 increment(_selected);
Mike Fiore 1:71125aa00e33 191
Mike Fiore 1:71125aa00e33 192 startUpdate();
Mike Fiore 1:71125aa00e33 193 // previously selected item moves up to field2
Mike Fiore 1:71125aa00e33 194 writeField(_fItem2, _items[index]);
Mike Fiore 1:71125aa00e33 195 increment(index);
Mike Fiore 1:71125aa00e33 196 // new selected item moves up to field3
Mike Fiore 1:71125aa00e33 197 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 198 increment(index);
Mike Fiore 1:71125aa00e33 199 // item from field1 moves down to field4
Mike Fiore 1:71125aa00e33 200 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 201 increment(index);
Mike Fiore 1:71125aa00e33 202 // item from field2 moves up to field1
Mike Fiore 1:71125aa00e33 203 writeField(_fItem1, _items[index]);
Mike Fiore 1:71125aa00e33 204 endUpdate();
Mike Fiore 1:71125aa00e33 205 break;
Mike Fiore 1:71125aa00e33 206
Mike Fiore 1:71125aa00e33 207 default:
Mike Fiore 1:71125aa00e33 208 // this is the generic case - should handle lists of 5+ items correctly
Mike Fiore 1:71125aa00e33 209 // item4 -> item5 item6 -> item7
Mike Fiore 1:71125aa00e33 210 // item5 -> item1 item7 -> item1
Mike Fiore 1:71125aa00e33 211 // => item1 -> => item2 => item1 -> => item2
Mike Fiore 1:71125aa00e33 212 // item2 -> item3 item2 -> item3
Mike Fiore 1:71125aa00e33 213 // item3 -> item4 item3 -> item4
Mike Fiore 1:71125aa00e33 214
Mike Fiore 1:71125aa00e33 215 index = _selected;
Mike Fiore 1:71125aa00e33 216 // keep selected item up to date
Mike Fiore 1:71125aa00e33 217 increment(_selected);
Mike Fiore 1:71125aa00e33 218
Mike Fiore 1:71125aa00e33 219 startUpdate();
Mike Fiore 1:71125aa00e33 220 decrement(index);
Mike Fiore 1:71125aa00e33 221 // item from field2 moves up to field1
Mike Fiore 1:71125aa00e33 222 writeField(_fItem1, _items[index]);
Mike Fiore 1:71125aa00e33 223 increment(index);
Mike Fiore 1:71125aa00e33 224 // previously selected item moves up to field2
Mike Fiore 1:71125aa00e33 225 writeField(_fItem2, _items[index]);
Mike Fiore 1:71125aa00e33 226 increment(index);
Mike Fiore 1:71125aa00e33 227 // new selected item moves up to field3
Mike Fiore 1:71125aa00e33 228 writeField(_fItem3, _items[index]);
Mike Fiore 1:71125aa00e33 229 increment(index);
Mike Fiore 1:71125aa00e33 230 // item from field5 moves up to field4
Mike Fiore 1:71125aa00e33 231 writeField(_fItem4, _items[index]);
Mike Fiore 1:71125aa00e33 232 increment(index);
Mike Fiore 1:71125aa00e33 233 // next item (from field1 or off screen) moves up to field5
Mike Fiore 1:71125aa00e33 234 writeField(_fItem5, _items[index]);
Mike Fiore 1:71125aa00e33 235 endUpdate();
Mike Fiore 1:71125aa00e33 236 break;
Mike Fiore 1:71125aa00e33 237 }
Mike Fiore 1:71125aa00e33 238 }
Mike Fiore 1:71125aa00e33 239
Mike Fiore 1:71125aa00e33 240 std::string LayoutScrollSelect::select() {
Mike Fiore 1:71125aa00e33 241 std::string selected = "";
Mike Fiore 1:71125aa00e33 242 if (_size > 0)
Mike Fiore 1:71125aa00e33 243 selected = _items[_selected];
Mike Fiore 1:71125aa00e33 244
Mike Fiore 1:71125aa00e33 245 return selected;
Mike Fiore 1:71125aa00e33 246 }
Mike Fiore 1:71125aa00e33 247
Mike Fiore 1:71125aa00e33 248 void LayoutScrollSelect::increment(size_t& index) {
Mike Fiore 1:71125aa00e33 249 if (_size > 1) {
Mike Fiore 1:71125aa00e33 250 index++;
Mike Fiore 1:71125aa00e33 251 index %= _size;
Mike Fiore 1:71125aa00e33 252 }
Mike Fiore 1:71125aa00e33 253 }
Mike Fiore 1:71125aa00e33 254
Mike Fiore 1:71125aa00e33 255 void LayoutScrollSelect::decrement(size_t& index) {
Mike Fiore 1:71125aa00e33 256 if (_size > 1) {
Mike Fiore 1:71125aa00e33 257 if (index == 0)
Mike Fiore 1:71125aa00e33 258 index = _size - 1;
Mike Fiore 1:71125aa00e33 259 else
Mike Fiore 1:71125aa00e33 260 index--;
Mike Fiore 1:71125aa00e33 261 }
Mike Fiore 1:71125aa00e33 262 }