MultiTech / Mbed OS Dot-AT-Firmware

AT command firmware for MultiTech Dot devices.

Fork of mDot_AT_firmware by MultiTech

Dot Library Not Included!

Because these example programs can be used for both mDot and xDot devices, the LoRa stack is not included. The libmDot library should be imported if building for mDot devices. The libxDot library should be imported if building for xDot devices. The AT firmware was last tested with mbed-os-5.4.7. Using a version past mbed-os-5.4.7 will cause the build to fail. The library used with the AT firmware has to match the mbed-os version.

Dot Library Version 3 Updates

Dot Library versions 3.x.x require a channel plan to be injected into the stack. The Dot-Examples and Dot-AT-Firmware do this by defining a macro called "CHANNEL_PLAN" that controls the channel plan that will be used in the examples. Available channel plans will be in the Dot Library repository in the plans folder.

Revision 20 and earlier of Dot-Examples and revision 15 and earlier of Dot-AT-Firmware should be used with Dot Library versions prior to 3.0.0.

Fota Library

Th Fota Library must be added to compile for mDot 3.1.0 with Fota support. Latest dev libraries and 3.2.0 release will include Fota with libmDot/libxDot.

AT Firmware Description

This AT Firmware is what ships on mDot and xDot devices. It provides an AT command interface for using the mDot or xDot for LoRa communication.

AT command documentation can be found on Multitech.com.

The firmware changelog can be found here. The library changelog can be found here.

Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Stable and development libraries are available for both mDot and xDot platforms. The library chosen must match the target platform. Compiling for the mDot platform with the xDot library or vice versa will not succeed.

mDot Library

Development library for mDot.

libmDot-dev

Stable library for mDot.

libmDot

xDot Library

Development library for xDot.

libxDot-dev

Stable library for xDot.

libxDot

CommandTerminal/CmdDebugBaudRate.cpp@18:63f098f042b2, 2019-03-08 (annotated)

Committer:
jenkins@jenkinsdm1
Date:
Fri Mar 08 11:37:37 2019 -0600
Revision:
18:63f098f042b2
Parent:
14:f9a77400b622
Child:
27:5fafd3b26ac3
mdot-firmware revision 3.1.0

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:e52ae6584f1c 1 #include "CmdDebugBaudRate.h"
Mike Fiore 1:e52ae6584f1c 2
Mike Fiore 14:f9a77400b622 3 CmdDebugBaudRate::CmdDebugBaudRate() :
Mike Fiore 14:f9a77400b622 4 #if defined(TARGET_MTS_MDOT_F411RE)
Mike Fiore 14:f9a77400b622 5 Command("Debug Baud Rate", "AT+DIPR", "Set debug serial baud rate, default: 115200 ", "(2400,4800,9600,19200,38400,57600,115200,230400,460800,921600)")
Mike Fiore 14:f9a77400b622 6 #else
Mike Fiore 14:f9a77400b622 7 Command("Debug Baud Rate", "AT+DIPR", "Set debug serial baud rate, default: 115200 ", "(2400,4800,9600,19200,38400,57600,115200,230400)")
Mike Fiore 14:f9a77400b622 8 #endif
Mike Fiore 1:e52ae6584f1c 9 {
Mike Fiore 1:e52ae6584f1c 10 _queryable = true;
Mike Fiore 1:e52ae6584f1c 11 }
Mike Fiore 1:e52ae6584f1c 12
jenkins@jenkinsdm1 18:63f098f042b2 13 uint32_t CmdDebugBaudRate::action(const std::vector<std::string>& args)
Mike Fiore 1:e52ae6584f1c 14 {
Mike Fiore 1:e52ae6584f1c 15 if (args.size() == 1)
Mike Fiore 1:e52ae6584f1c 16 {
Mike Fiore 14:f9a77400b622 17 CommandTerminal::Serial()->writef("%lu\r\n", CommandTerminal::Dot()->getDebugBaud());
Mike Fiore 1:e52ae6584f1c 18 }
Mike Fiore 1:e52ae6584f1c 19 else if (args.size() == 2)
Mike Fiore 1:e52ae6584f1c 20 {
Mike Fiore 9:ff62b20f7000 21 int baudrate = 0;
Mike Fiore 1:e52ae6584f1c 22
Mike Fiore 9:ff62b20f7000 23 sscanf(args[1].c_str(), "%d", &baudrate);
Mike Fiore 1:e52ae6584f1c 24
Mike Fiore 14:f9a77400b622 25 if (CommandTerminal::Dot()->setDebugBaud(baudrate) == mDot::MDOT_OK) {
Mike Fiore 14:f9a77400b622 26 CommandTerminal::Serial()->writef("Set Debug Baud Rate: %d\r\n", baudrate);
Mike Fiore 1:e52ae6584f1c 27 } else {
Mike Fiore 14:f9a77400b622 28 CommandTerminal::setErrorMessage(CommandTerminal::Dot()->getLastError());;
Mike Fiore 1:e52ae6584f1c 29 return 1;
Mike Fiore 1:e52ae6584f1c 30 }
Mike Fiore 1:e52ae6584f1c 31 }
Mike Fiore 1:e52ae6584f1c 32
Mike Fiore 1:e52ae6584f1c 33 return 0;
Mike Fiore 1:e52ae6584f1c 34 }
Mike Fiore 1:e52ae6584f1c 35
jenkins@jenkinsdm1 18:63f098f042b2 36 bool CmdDebugBaudRate::verify(const std::vector<std::string>& args)
Mike Fiore 1:e52ae6584f1c 37 {
Mike Fiore 1:e52ae6584f1c 38 if (args.size() == 1)
Mike Fiore 1:e52ae6584f1c 39 return true;
Mike Fiore 1:e52ae6584f1c 40
Mike Fiore 1:e52ae6584f1c 41 if (args.size() == 2) {
Mike Fiore 9:ff62b20f7000 42 int baudrate;
Mike Fiore 1:e52ae6584f1c 43
Mike Fiore 9:ff62b20f7000 44 if (sscanf(args[1].c_str(), "%d", &baudrate) != 1) {
Mike Fiore 14:f9a77400b622 45 CommandTerminal::setErrorMessage("Invalid argument");
Mike Fiore 1:e52ae6584f1c 46 return false;
Mike Fiore 1:e52ae6584f1c 47 }
Mike Fiore 1:e52ae6584f1c 48
Mike Fiore 1:e52ae6584f1c 49 return true;
Mike Fiore 1:e52ae6584f1c 50 }
Mike Fiore 1:e52ae6584f1c 51
Mike Fiore 14:f9a77400b622 52 CommandTerminal::setErrorMessage("Invalid arguments");
Mike Fiore 1:e52ae6584f1c 53 return false;
Mike Fiore 1:e52ae6584f1c 54 }