MultiTech / Mbed OS Dot-AT-Firmware

AT command firmware for MultiTech Dot devices.

Fork of mDot_AT_firmware by MultiTech

Dot Library Not Included!

Because these example programs can be used for both mDot and xDot devices, the LoRa stack is not included. The libmDot library should be imported if building for mDot devices. The libxDot library should be imported if building for xDot devices. The AT firmware was last tested with mbed-os-5.4.7. Using a version past mbed-os-5.4.7 will cause the build to fail. The library used with the AT firmware has to match the mbed-os version.

Dot Library Version 3 Updates

Dot Library versions 3.x.x require a channel plan to be injected into the stack. The Dot-Examples and Dot-AT-Firmware do this by defining a macro called "CHANNEL_PLAN" that controls the channel plan that will be used in the examples. Available channel plans will be in the Dot Library repository in the plans folder.

Revision 20 and earlier of Dot-Examples and revision 15 and earlier of Dot-AT-Firmware should be used with Dot Library versions prior to 3.0.0.

Fota Library

Th Fota Library must be added to compile for mDot 3.1.0 with Fota support. Latest dev libraries and 3.2.0 release will include Fota with libmDot/libxDot.

AT Firmware Description

This AT Firmware is what ships on mDot and xDot devices. It provides an AT command interface for using the mDot or xDot for LoRa communication.

AT command documentation can be found on Multitech.com.

The firmware changelog can be found here. The library changelog can be found here.

Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Stable and development libraries are available for both mDot and xDot platforms. The library chosen must match the target platform. Compiling for the mDot platform with the xDot library or vice versa will not succeed.

mDot Library

Development library for mDot.

libmDot-dev

Stable library for mDot.

libmDot

xDot Library

Development library for xDot.

libxDot-dev

Stable library for xDot.

libxDot

CommandTerminal/CmdRxFrequency.cpp@33:5c0252521669, 2021-01-29 (annotated)

Committer:
Jason Reiss
Date:
Fri Jan 29 13:04:32 2021 -0600
Revision:
33:5c0252521669
Parent:
28:c222ca8383f4
Child:
36:b586cd6e91f3
Remove moved commands

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 1:e52ae6584f1c 1 #include "CmdRxFrequency.h"
Mike Fiore 1:e52ae6584f1c 2
Jason Reiss 28:c222ca8383f4 3 CmdRxFrequency::CmdRxFrequency() :
Jason Reiss 28:c222ca8383f4 4 #if MTS_CMD_TERM_VERBOSE
Jason Reiss 28:c222ca8383f4 5 Command("Rx Frequency", "AT+RXF", "Set the Rx frequency for +RECV,+RECVC", "SEE PLAN")
Jason Reiss 27:5fafd3b26ac3 6 #else
Jason Reiss 28:c222ca8383f4 7 Command("AT+RXF")
Jason Reiss 27:5fafd3b26ac3 8 #endif
Mike Fiore 1:e52ae6584f1c 9 {
Mike Fiore 1:e52ae6584f1c 10 _queryable = true;
Mike Fiore 1:e52ae6584f1c 11 }
Mike Fiore 1:e52ae6584f1c 12
jenkins@jenkinsdm1 18:63f098f042b2 13 uint32_t CmdRxFrequency::action(const std::vector<std::string>& args) {
jenkins@jenkinsdm1 16:d5cf2af81a6d 14 if (args.size() == 1) {
Mike Fiore 14:f9a77400b622 15 CommandTerminal::Serial()->writef("%lu\r\n", CommandTerminal::Dot()->getRxFrequency());
Mike Fiore 1:e52ae6584f1c 16 }
Mike Fiore 1:e52ae6584f1c 17 else if (args.size() == 2)
jenkins@jenkinsdm1 16:d5cf2af81a6d 18 {
jenkins@jenkinsdm1 16:d5cf2af81a6d 19
Mike Fiore 9:ff62b20f7000 20 int frequency = 0;
Mike Fiore 9:ff62b20f7000 21 sscanf(args[1].c_str(), "%d", &frequency);
Jason Reiss 28:c222ca8383f4 22 if (CommandTerminal::Dot()->setRxFrequency(frequency) != mDot::MDOT_OK) {
Mike Fiore 1:e52ae6584f1c 23 return 1;
Mike Fiore 1:e52ae6584f1c 24 }
Mike Fiore 1:e52ae6584f1c 25 }
Mike Fiore 1:e52ae6584f1c 26
Mike Fiore 1:e52ae6584f1c 27 return 0;
Mike Fiore 1:e52ae6584f1c 28 }
Mike Fiore 1:e52ae6584f1c 29
jenkins@jenkinsdm1 18:63f098f042b2 30 bool CmdRxFrequency::verify(const std::vector<std::string>& args) {
Mike Fiore 1:e52ae6584f1c 31 if (args.size() == 1)
Mike Fiore 1:e52ae6584f1c 32 return true;
Mike Fiore 1:e52ae6584f1c 33
Mike Fiore 1:e52ae6584f1c 34 if (args.size() == 2)
jenkins@jenkinsdm1 16:d5cf2af81a6d 35 {
Mike Fiore 9:ff62b20f7000 36 int frequency;
Mike Fiore 9:ff62b20f7000 37 if (sscanf(args[1].c_str(), "%d", &frequency) != 1) {
Jason Reiss 28:c222ca8383f4 38 #if MTS_CMD_TERM_VERBOSE
Mike Fiore 14:f9a77400b622 39 CommandTerminal::setErrorMessage("Invalid argument");
Jason Reiss 28:c222ca8383f4 40 #endif
Mike Fiore 1:e52ae6584f1c 41 return false;
Mike Fiore 1:e52ae6584f1c 42 }
Mike Fiore 1:e52ae6584f1c 43
Jason Reiss 28:c222ca8383f4 44 if (frequency != 0 && (frequency < int(CommandTerminal::Dot()->getMinFrequency()) || frequency > int(CommandTerminal::Dot()->getMaxFrequency()))) {
Jason Reiss 28:c222ca8383f4 45 #if MTS_CMD_TERM_VERBOSE
jenkins@jenkinsdm1 16:d5cf2af81a6d 46 char tmp[256];
jenkins@jenkinsdm1 16:d5cf2af81a6d 47 sprintf(tmp, "Invalid frequency, expects (0,%lu-%lu)", CommandTerminal::Dot()->getMinFrequency(), CommandTerminal::Dot()->getMaxFrequency());
jenkins@jenkinsdm1 16:d5cf2af81a6d 48 CommandTerminal::setErrorMessage(tmp);
Jason Reiss 28:c222ca8383f4 49 #endif
Mike Fiore 1:e52ae6584f1c 50 return false;
Mike Fiore 1:e52ae6584f1c 51 }
Mike Fiore 1:e52ae6584f1c 52
Mike Fiore 1:e52ae6584f1c 53 return true;
Mike Fiore 1:e52ae6584f1c 54 }
Mike Fiore 1:e52ae6584f1c 55
Jason Reiss 28:c222ca8383f4 56 #if MTS_CMD_TERM_VERBOSE
Mike Fiore 14:f9a77400b622 57 CommandTerminal::setErrorMessage("Invalid arguments");
Jason Reiss 28:c222ca8383f4 58 #endif
Mike Fiore 1:e52ae6584f1c 59 return false;
Mike Fiore 1:e52ae6584f1c 60 }