MultiTech / Mbed OS Dot-AT-Firmware

AT command firmware for MultiTech Dot devices.

Fork of mDot_AT_firmware by MultiTech

Dot Library Not Included!

Because these example programs can be used for both mDot and xDot devices, the LoRa stack is not included. The libmDot library should be imported if building for mDot devices. The libxDot library should be imported if building for xDot devices. The AT firmware was last tested with mbed-os-5.4.7. Using a version past mbed-os-5.4.7 will cause the build to fail. The library used with the AT firmware has to match the mbed-os version.

Dot Library Version 3 Updates

Dot Library versions 3.x.x require a channel plan to be injected into the stack. The Dot-Examples and Dot-AT-Firmware do this by defining a macro called "CHANNEL_PLAN" that controls the channel plan that will be used in the examples. Available channel plans will be in the Dot Library repository in the plans folder.

Revision 20 and earlier of Dot-Examples and revision 15 and earlier of Dot-AT-Firmware should be used with Dot Library versions prior to 3.0.0.

Fota Library

Th Fota Library must be added to compile for mDot 3.1.0 with Fota support. Latest dev libraries and 3.2.0 release will include Fota with libmDot/libxDot.

AT Firmware Description

This AT Firmware is what ships on mDot and xDot devices. It provides an AT command interface for using the mDot or xDot for LoRa communication.

AT command documentation can be found on Multitech.com.

The firmware changelog can be found here. The library changelog can be found here.

Dot Libraries

Dot Library Limitations

The commit messages in libmDot-mbed5 and libmDot-dev-mbed5 specify the version of the Dot library the commit contains and the version of mbed-os it was compiled against. We recommend building your application with the version of mbed-os specified in the commit message of the version of the Dot library you're using. This will ensure that you don't run into any runtime issues caused by differences in the mbed-os versions.

Stable and development libraries are available for both mDot and xDot platforms. The library chosen must match the target platform. Compiling for the mDot platform with the xDot library or vice versa will not succeed.

mDot Library

Development library for mDot.

libmDot-dev

Stable library for mDot.

libmDot

xDot Library

Development library for xDot.

libxDot-dev

Stable library for xDot.

libxDot

CommandTerminal/CmdWakeDelay.cpp@26:35c201bc5205, 2019-05-03 (annotated)

Committer:
jreiss
Date:
Fri May 03 18:49:18 2019 +0000
Revision:
26:35c201bc5205
Parent:
18:63f098f042b2
Child:
27:5fafd3b26ac3
Update to Dot 3.2.1 release; Remove AutoSleep command; Update mbed-os to 5.11.1;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 4:666017851052 1 #include "CmdWakeDelay.h"
Mike Fiore 4:666017851052 2
Mike Fiore 14:f9a77400b622 3 CmdWakeDelay::CmdWakeDelay() :
Mike Fiore 14:f9a77400b622 4 Command("Wake Delay", "AT+WD", "Time to wait for data after wakeup signal (milliseconds)", "(2-2147483646) ms")
Mike Fiore 4:666017851052 5 {
Mike Fiore 4:666017851052 6 _queryable = true;
Mike Fiore 4:666017851052 7 }
Mike Fiore 4:666017851052 8
jenkins@jenkinsdm1 18:63f098f042b2 9 uint32_t CmdWakeDelay::action(const std::vector<std::string>& args)
Mike Fiore 4:666017851052 10 {
Mike Fiore 4:666017851052 11 if (args.size() == 1)
Mike Fiore 4:666017851052 12 {
Mike Fiore 14:f9a77400b622 13 CommandTerminal::Serial()->writef("%lu\r\n", CommandTerminal::Dot()->getWakeDelay());
Mike Fiore 4:666017851052 14 }
Mike Fiore 4:666017851052 15 else if (args.size() == 2)
Mike Fiore 4:666017851052 16 {
Mike Fiore 9:ff62b20f7000 17 int delay;
Mike Fiore 9:ff62b20f7000 18 sscanf(args[1].c_str(), "%d", &delay);
Mike Fiore 4:666017851052 19
Mike Fiore 14:f9a77400b622 20 if (CommandTerminal::Dot()->setWakeDelay(delay) != mDot::MDOT_OK) {
Mike Fiore 14:f9a77400b622 21 CommandTerminal::setErrorMessage(CommandTerminal::Dot()->getLastError());;
Mike Fiore 4:666017851052 22 return 1;
Mike Fiore 4:666017851052 23 }
Mike Fiore 4:666017851052 24 }
Mike Fiore 4:666017851052 25
Mike Fiore 4:666017851052 26 return 0;
Mike Fiore 4:666017851052 27 }
Mike Fiore 4:666017851052 28
jenkins@jenkinsdm1 18:63f098f042b2 29 bool CmdWakeDelay::verify(const std::vector<std::string>& args)
Mike Fiore 4:666017851052 30 {
Mike Fiore 4:666017851052 31 if (args.size() == 1)
Mike Fiore 4:666017851052 32 return true;
Mike Fiore 4:666017851052 33
Mike Fiore 4:666017851052 34 if (args.size() == 2)
Mike Fiore 4:666017851052 35 {
Mike Fiore 9:ff62b20f7000 36 int delay;
Mike Fiore 9:ff62b20f7000 37 if (sscanf(args[1].c_str(), "%d", &delay) != 1) {
Mike Fiore 14:f9a77400b622 38 CommandTerminal::setErrorMessage("Invalid argument");
Mike Fiore 4:666017851052 39 return false;
Mike Fiore 4:666017851052 40 }
Mike Fiore 4:666017851052 41
Mike Fiore 14:f9a77400b622 42 if (delay < 2 || delay > INT_MAX-1) {
Mike Fiore 14:f9a77400b622 43 CommandTerminal::setErrorMessage("Invalid delay, expects (2-2147483646) ms");
Mike Fiore 4:666017851052 44 return false;
Mike Fiore 4:666017851052 45 }
Mike Fiore 4:666017851052 46
Mike Fiore 4:666017851052 47 return true;
Mike Fiore 4:666017851052 48 }
Mike Fiore 4:666017851052 49
Mike Fiore 14:f9a77400b622 50 CommandTerminal::setErrorMessage("Invalid arguments");
Mike Fiore 4:666017851052 51 return false;
Mike Fiore 4:666017851052 52 }