Microbug
Minor temporary patch to allow DFU packet callback
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: services/DeviceInformationService.h
- Revision:
- 118:620d28e7a1ba
- Child:
- 237:6050833395f1
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/services/DeviceInformationService.h Mon Sep 22 10:59:09 2014 +0100
@@ -0,0 +1,124 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_DEVICE_INFORMATION_SERVICE_H__
+#define __BLE_DEVICE_INFORMATION_SERVICE_H__
+
+#include "BLEDevice.h"
+
+/* Device Information Service */
+/* Service: https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.device_information.xml */
+/* Manufacturer Name String Char: https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.manufacturer_name_string.xml */
+class DeviceInformationService {
+public:
+ /**
+ * Constructor.
+ *
+ * @param[in] _ble
+ * Reference to the BLEDevice.
+ * @param[in] manufacturersName
+ * This characteristic represents the name of the
+ * manufacturer of the device. The name is copied into the
+ * BLE stack during this constructor.
+ * @param[in] modelNumber
+ * This characteristic represents the model number that is
+ * assigned by the device vendor. The value is copied into
+ * the BLE stack during this constructor.
+ * @param[in] serialNumber
+ * This characteristic represents the serial number for a
+ * particular instance of the device. The value is copied
+ * into the BLE stack during this constructor.
+ * @param[in] hardwareRevision
+ * This characteristic represents the hardware revision for
+ * the hardware within the device. The value is copied
+ * into the BLE stack during this constructor.
+ * @param[in] firmwareRevision
+ * This characteristic represents the firmware revision for
+ * the firmware within the device. The value is copied
+ * into the BLE stack during this constructor.
+ * @param[in] softwareRevision
+ * This characteristic represents the software revision for
+ * the software within the device. The value is copied
+ * into the BLE stack during this constructor.
+ */
+ DeviceInformationService(BLEDevice &_ble,
+ const char *manufacturersName = NULL,
+ const char *modelNumber = NULL,
+ const char *serialNumber = NULL,
+ const char *hardwareRevision = NULL,
+ const char *firmwareRevision = NULL,
+ const char *softwareRevision = NULL) :
+ ble(_ble),
+ manufacturersNameStringCharacteristic(GattCharacteristic::UUID_MANUFACTURER_NAME_STRING_CHAR,
+ (uint8_t *)manufacturersName,
+ (manufacturersName != NULL) ? strlen(manufacturersName) : 0, /* minLength */
+ (manufacturersName != NULL) ? strlen(manufacturersName) : 0, /* maxLength */
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ),
+ modelNumberStringCharacteristic(GattCharacteristic::UUID_MODEL_NUMBER_STRING_CHAR,
+ (uint8_t *)modelNumber,
+ (modelNumber != NULL) ? strlen(modelNumber) : 0, /* minLength */
+ (modelNumber != NULL) ? strlen(modelNumber) : 0, /* maxLength */
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ),
+ serialNumberStringCharacteristic(GattCharacteristic::UUID_SERIAL_NUMBER_STRING_CHAR,
+ (uint8_t *)serialNumber,
+ (serialNumber != NULL) ? strlen(serialNumber) : 0, /* minLength */
+ (serialNumber != NULL) ? strlen(serialNumber) : 0, /* maxLength */
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ),
+ hardwareRevisionStringCharacteristic(GattCharacteristic::UUID_HARDWARE_REVISION_STRING_CHAR,
+ (uint8_t *)hardwareRevision,
+ (hardwareRevision != NULL) ? strlen(hardwareRevision) : 0, /* minLength */
+ (hardwareRevision != NULL) ? strlen(hardwareRevision) : 0, /* maxLength */
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ),
+ firmwareRevisionStringCharacteristic(GattCharacteristic::UUID_FIRMWARE_REVISION_STRING_CHAR,
+ (uint8_t *)firmwareRevision,
+ (firmwareRevision != NULL) ? strlen(firmwareRevision) : 0, /* minLength */
+ (firmwareRevision != NULL) ? strlen(firmwareRevision) : 0, /* maxLength */
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ),
+ softwareRevisionStringCharacteristic(GattCharacteristic::UUID_SOFTWARE_REVISION_STRING_CHAR,
+ (uint8_t *)softwareRevision,
+ (softwareRevision != NULL) ? strlen(softwareRevision) : 0, /* minLength */
+ (softwareRevision != NULL) ? strlen(softwareRevision) : 0, /* maxLength */
+ GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ)
+ {
+ static bool serviceAdded = false; /* We should only ever need to add the heart rate service once. */
+ if (serviceAdded) {
+ return;
+ }
+
+ GattCharacteristic *charTable[] = {&manufacturersNameStringCharacteristic,
+ &modelNumberStringCharacteristic,
+ &serialNumberStringCharacteristic,
+ &hardwareRevisionStringCharacteristic,
+ &firmwareRevisionStringCharacteristic,
+ &softwareRevisionStringCharacteristic};
+ GattService deviceInformationService(GattService::UUID_DEVICE_INFORMATION_SERVICE, charTable,
+ sizeof(charTable) / sizeof(GattCharacteristic *));
+
+ ble.addService(deviceInformationService);
+ serviceAdded = true;
+ }
+
+private:
+ BLEDevice &ble;
+ GattCharacteristic manufacturersNameStringCharacteristic;
+ GattCharacteristic modelNumberStringCharacteristic;
+ GattCharacteristic serialNumberStringCharacteristic;
+ GattCharacteristic hardwareRevisionStringCharacteristic;
+ GattCharacteristic firmwareRevisionStringCharacteristic;
+ GattCharacteristic softwareRevisionStringCharacteristic;
+};
+
+#endif /* #ifndef __BLE_DEVICE_INFORMATION_SERVICE_H__*/