Microbug
Minor temporary patch to allow DFU packet callback
Fork of
BLE_API
by 
Bluetooth Low Energy
public/BLEDevice.h@293:6278354cfd98, 2015-03-02 (annotated)
- Committer:
- rgrover1
- Date:
- Mon Mar 02 11:50:47 2015 +0000
- Revision:
- 293:6278354cfd98
- Parent:
- 292:b5ee2ada4f33
- Child:
- 294:ab928e365ea1
Synchronized with git rev eb17caed
Author: Jeremy Brodt
Corrected comparison value and cast.
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| rgrover1 | 257:7a50601356cc | 1 | /* mbed Microcontroller Library |
| rgrover1 | 257:7a50601356cc | 2 | * Copyright (c) 2006-2013 ARM Limited |
| rgrover1 | 257:7a50601356cc | 3 | * |
| rgrover1 | 257:7a50601356cc | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| rgrover1 | 257:7a50601356cc | 5 | * you may not use this file except in compliance with the License. |
| rgrover1 | 257:7a50601356cc | 6 | * You may obtain a copy of the License at |
| rgrover1 | 257:7a50601356cc | 7 | * |
| rgrover1 | 257:7a50601356cc | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| rgrover1 | 257:7a50601356cc | 9 | * |
| rgrover1 | 257:7a50601356cc | 10 | * Unless required by applicable law or agreed to in writing, software |
| rgrover1 | 257:7a50601356cc | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| rgrover1 | 257:7a50601356cc | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| rgrover1 | 257:7a50601356cc | 13 | * See the License for the specific language governing permissions and |
| rgrover1 | 257:7a50601356cc | 14 | * limitations under the License. |
| rgrover1 | 257:7a50601356cc | 15 | */ |
| rgrover1 | 257:7a50601356cc | 16 | |
| rgrover1 | 257:7a50601356cc | 17 | #ifndef __BLE_DEVICE__ |
| rgrover1 | 257:7a50601356cc | 18 | #define __BLE_DEVICE__ |
| rgrover1 | 257:7a50601356cc | 19 | |
| rgrover1 | 257:7a50601356cc | 20 | #include "blecommon.h" |
| rgrover1 | 257:7a50601356cc | 21 | #include "Gap.h" |
| rgrover1 | 257:7a50601356cc | 22 | #include "GattServer.h" |
| rgrover1 | 257:7a50601356cc | 23 | #include "BLEDeviceInstanceBase.h" |
| rgrover1 | 257:7a50601356cc | 24 | |
| rgrover1 | 257:7a50601356cc | 25 | /** |
| rgrover1 | 257:7a50601356cc | 26 | * The base class used to abstract away BLE capable radio transceivers or SOCs, |
| rgrover1 | 257:7a50601356cc | 27 | * to enable this BLE API to work with any radio transparently. |
| rgrover1 | 257:7a50601356cc | 28 | */ |
| rgrover1 | 257:7a50601356cc | 29 | class BLEDevice |
| rgrover1 | 257:7a50601356cc | 30 | { |
| rgrover1 | 257:7a50601356cc | 31 | public: |
| rgrover1 | 257:7a50601356cc | 32 | /** |
| rgrover1 | 257:7a50601356cc | 33 | * Initialize the BLE controller. This should be called before using |
| rgrover1 | 257:7a50601356cc | 34 | * anything else in the BLE_API. |
| rgrover1 | 257:7a50601356cc | 35 | */ |
| rgrover1 | 257:7a50601356cc | 36 | ble_error_t init(); |
| rgrover1 | 257:7a50601356cc | 37 | ble_error_t reset(void); |
| rgrover1 | 257:7a50601356cc | 38 | |
| rgrover1 | 257:7a50601356cc | 39 | /** |
| rgrover1 | 257:7a50601356cc | 40 | * Purge the BLE stack of GATT and GAP state. init() must be called afterwards to re-instate services and GAP state. |
| rgrover1 | 257:7a50601356cc | 41 | */ |
| rgrover1 | 257:7a50601356cc | 42 | ble_error_t shutdown(void); |
| rgrover1 | 257:7a50601356cc | 43 | |
| rgrover1 | 257:7a50601356cc | 44 | /* GAP specific APIs */ |
| rgrover1 | 257:7a50601356cc | 45 | public: |
| rgrover1 | 257:7a50601356cc | 46 | /** |
| rgrover1 | 257:7a50601356cc | 47 | * Set the BTLE MAC address and type. |
| rgrover1 | 257:7a50601356cc | 48 | * @return BLE_ERROR_NONE on success. |
| rgrover1 | 257:7a50601356cc | 49 | */ |
| rgrover1 | 257:7a50601356cc | 50 | ble_error_t setAddress(Gap::addr_type_t type, const Gap::address_t address); |
| rgrover1 | 257:7a50601356cc | 51 | |
| rgrover1 | 257:7a50601356cc | 52 | /** |
| rgrover1 | 257:7a50601356cc | 53 | * Fetch the BTLE MAC address and type. |
| rgrover1 | 257:7a50601356cc | 54 | * @return BLE_ERROR_NONE on success. |
| rgrover1 | 257:7a50601356cc | 55 | */ |
| rgrover1 | 257:7a50601356cc | 56 | ble_error_t getAddress(Gap::addr_type_t *typeP, Gap::address_t address); |
| rgrover1 | 257:7a50601356cc | 57 | |
| rgrover1 | 257:7a50601356cc | 58 | /** |
| rgrover1 | 257:7a50601356cc | 59 | * @param[in] advType |
| rgrover1 | 257:7a50601356cc | 60 | * The GAP advertising mode to use for this device. Valid |
| rgrover1 | 257:7a50601356cc | 61 | * values are defined in AdvertisingType: |
| rgrover1 | 257:7a50601356cc | 62 | * |
| rgrover1 | 257:7a50601356cc | 63 | * \par ADV_NON_CONNECTABLE_UNDIRECTED |
| rgrover1 | 257:7a50601356cc | 64 | * All connections to the peripheral device will be refused. |
| rgrover1 | 257:7a50601356cc | 65 | * |
| rgrover1 | 257:7a50601356cc | 66 | * \par ADV_CONNECTABLE_DIRECTED |
| rgrover1 | 257:7a50601356cc | 67 | * Only connections from a pre-defined central device will be |
| rgrover1 | 257:7a50601356cc | 68 | * accepted. |
| rgrover1 | 257:7a50601356cc | 69 | * |
| rgrover1 | 257:7a50601356cc | 70 | * \par ADV_CONNECTABLE_UNDIRECTED |
| rgrover1 | 257:7a50601356cc | 71 | * Any central device can connect to this peripheral. |
| rgrover1 | 257:7a50601356cc | 72 | * |
| rgrover1 | 257:7a50601356cc | 73 | * \par ADV_SCANNABLE_UNDIRECTED |
| rgrover1 | 290:aafa664ba829 | 74 | * Any central device can connect to this peripheral, and |
| rgrover1 | 290:aafa664ba829 | 75 | * the secondary Scan Response payload will be included or |
| rgrover1 | 290:aafa664ba829 | 76 | * available to central devices. |
| rgrover1 | 257:7a50601356cc | 77 | * |
| rgrover1 | 257:7a50601356cc | 78 | * \par |
| rgrover1 | 257:7a50601356cc | 79 | * See Bluetooth Core Specification 4.0 (Vol. 3), Part C, |
| rgrover1 | 257:7a50601356cc | 80 | * Section 9.3 and Core Specification 4.0 (Vol. 6), Part B, |
| rgrover1 | 257:7a50601356cc | 81 | * Section 2.3.1 for further information on GAP connection |
| rgrover1 | 257:7a50601356cc | 82 | * modes |
| rgrover1 | 257:7a50601356cc | 83 | */ |
| rgrover1 | 257:7a50601356cc | 84 | void setAdvertisingType(GapAdvertisingParams::AdvertisingType); |
| rgrover1 | 257:7a50601356cc | 85 | |
| rgrover1 | 257:7a50601356cc | 86 | /** |
| rgrover1 | 257:7a50601356cc | 87 | * @param[in] interval |
| rgrover1 | 257:7a50601356cc | 88 | * Advertising interval between 0x0020 and 0x4000 in 0.625ms |
| rgrover1 | 257:7a50601356cc | 89 | * units (20ms to 10.24s). If using non-connectable mode |
| rgrover1 | 257:7a50601356cc | 90 | * (ADV_NON_CONNECTABLE_UNDIRECTED) this min value is |
| rgrover1 | 257:7a50601356cc | 91 | * 0x00A0 (100ms). To reduce the likelihood of collisions, the |
| rgrover1 | 257:7a50601356cc | 92 | * link layer perturbs this interval by a pseudo-random delay |
| rgrover1 | 257:7a50601356cc | 93 | * with a range of 0 ms to 10 ms for each advertising event. |
| rgrover1 | 257:7a50601356cc | 94 | * |
| rgrover1 | 257:7a50601356cc | 95 | * \par |
| rgrover1 | 257:7a50601356cc | 96 | * Decreasing this value will allow central devices to detect |
| rgrover1 | 257:7a50601356cc | 97 | * your peripheral faster at the expense of more power being |
| rgrover1 | 257:7a50601356cc | 98 | * used by the radio due to the higher data transmit rate. |
| rgrover1 | 257:7a50601356cc | 99 | * |
| rgrover1 | 257:7a50601356cc | 100 | * \par |
| rgrover1 | 257:7a50601356cc | 101 | * This field must be set to 0 if connectionMode is equal |
| rgrover1 | 257:7a50601356cc | 102 | * to ADV_CONNECTABLE_DIRECTED |
| rgrover1 | 257:7a50601356cc | 103 | * |
| rgrover1 | 257:7a50601356cc | 104 | * \par |
| rgrover1 | 257:7a50601356cc | 105 | * See Bluetooth Core Specification, Vol 3., Part C, |
| rgrover1 | 257:7a50601356cc | 106 | * Appendix A for suggested advertising intervals. |
| rgrover1 | 257:7a50601356cc | 107 | */ |
| rgrover1 | 257:7a50601356cc | 108 | void setAdvertisingInterval(uint16_t interval); |
| rgrover1 | 257:7a50601356cc | 109 | |
| rgrover1 | 257:7a50601356cc | 110 | /** |
| rgrover1 | 257:7a50601356cc | 111 | * @param[in] timeout |
| rgrover1 | 257:7a50601356cc | 112 | * Advertising timeout between 0x1 and 0x3FFF (1 and 16383) |
| rgrover1 | 257:7a50601356cc | 113 | * in seconds. Enter 0 to disable the advertising timeout. |
| rgrover1 | 257:7a50601356cc | 114 | */ |
| rgrover1 | 257:7a50601356cc | 115 | void setAdvertisingTimeout(uint16_t timeout); |
| rgrover1 | 257:7a50601356cc | 116 | |
| rgrover1 | 257:7a50601356cc | 117 | /** |
| rgrover1 | 257:7a50601356cc | 118 | * Please refer to the APIs above. |
| rgrover1 | 257:7a50601356cc | 119 | */ |
| rgrover1 | 257:7a50601356cc | 120 | void setAdvertisingParams(const GapAdvertisingParams &advParams); |
| rgrover1 | 257:7a50601356cc | 121 | |
| rgrover1 | 257:7a50601356cc | 122 | /** |
| rgrover1 | 257:7a50601356cc | 123 | * This API is typically used as an internal helper to udpate the transport |
| rgrover1 | 257:7a50601356cc | 124 | * backend with advertising data before starting to advertise. It may also |
| rgrover1 | 257:7a50601356cc | 125 | * be explicity used to dynamically reset the accumulated advertising |
| rgrover1 | 257:7a50601356cc | 126 | * payload and scanResponse; to do this, the application can clear and re- |
| rgrover1 | 257:7a50601356cc | 127 | * accumulate a new advertising payload (and scanResponse) before using this |
| rgrover1 | 257:7a50601356cc | 128 | * API. |
| rgrover1 | 257:7a50601356cc | 129 | */ |
| rgrover1 | 257:7a50601356cc | 130 | ble_error_t setAdvertisingPayload(void); |
| rgrover1 | 257:7a50601356cc | 131 | |
| rgrover1 | 257:7a50601356cc | 132 | /** |
| rgrover1 | 257:7a50601356cc | 133 | * Reset any advertising payload prepared from prior calls to |
| rgrover1 | 257:7a50601356cc | 134 | * accumulateAdvertisingPayload(). |
| rgrover1 | 257:7a50601356cc | 135 | */ |
| rgrover1 | 257:7a50601356cc | 136 | void clearAdvertisingPayload(void); |
| rgrover1 | 257:7a50601356cc | 137 | |
| rgrover1 | 257:7a50601356cc | 138 | /** |
| rgrover1 | 257:7a50601356cc | 139 | * Accumulate an AD structure in the advertising payload. Please note that |
| rgrover1 | 257:7a50601356cc | 140 | * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used |
| rgrover1 | 257:7a50601356cc | 141 | * as an additional 31 bytes if the advertising payload proves to be too |
| rgrover1 | 257:7a50601356cc | 142 | * small. |
| rgrover1 | 257:7a50601356cc | 143 | * |
| rgrover1 | 257:7a50601356cc | 144 | * @param flags |
| rgrover1 | 257:7a50601356cc | 145 | * The flags to be added. Multiple flags may be specified in |
| rgrover1 | 257:7a50601356cc | 146 | * combination. |
| rgrover1 | 257:7a50601356cc | 147 | */ |
| rgrover1 | 257:7a50601356cc | 148 | ble_error_t accumulateAdvertisingPayload(uint8_t flags); |
| rgrover1 | 257:7a50601356cc | 149 | |
| rgrover1 | 257:7a50601356cc | 150 | /** |
| rgrover1 | 257:7a50601356cc | 151 | * Accumulate an AD structure in the advertising payload. Please note that |
| rgrover1 | 257:7a50601356cc | 152 | * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used |
| rgrover1 | 257:7a50601356cc | 153 | * as an additional 31 bytes if the advertising payload proves to be too |
| rgrover1 | 257:7a50601356cc | 154 | * small. |
| rgrover1 | 257:7a50601356cc | 155 | * |
| rgrover1 | 257:7a50601356cc | 156 | * @param app |
| rgrover1 | 257:7a50601356cc | 157 | * The appearance of the peripheral. |
| rgrover1 | 257:7a50601356cc | 158 | */ |
| rgrover1 | 257:7a50601356cc | 159 | ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app); |
| rgrover1 | 257:7a50601356cc | 160 | |
| rgrover1 | 257:7a50601356cc | 161 | /** |
| rgrover1 | 257:7a50601356cc | 162 | * Accumulate an AD structure in the advertising payload. Please note that |
| rgrover1 | 257:7a50601356cc | 163 | * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used |
| rgrover1 | 257:7a50601356cc | 164 | * as an additional 31 bytes if the advertising payload proves to be too |
| rgrover1 | 257:7a50601356cc | 165 | * small. |
| rgrover1 | 257:7a50601356cc | 166 | * |
| rgrover1 | 257:7a50601356cc | 167 | * @param app |
| rgrover1 | 257:7a50601356cc | 168 | * The max transmit power to be used by the controller. This is |
| rgrover1 | 257:7a50601356cc | 169 | * only a hint. |
| rgrover1 | 257:7a50601356cc | 170 | */ |
| rgrover1 | 257:7a50601356cc | 171 | ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power); |
| rgrover1 | 257:7a50601356cc | 172 | |
| rgrover1 | 257:7a50601356cc | 173 | /** |
| rgrover1 | 257:7a50601356cc | 174 | * Accumulate a variable length byte-stream as an AD structure in the |
| rgrover1 | 257:7a50601356cc | 175 | * advertising payload. Please note that the payload is limited to 31 bytes. |
| rgrover1 | 257:7a50601356cc | 176 | * The SCAN_RESPONSE message may be used as an additional 31 bytes if the |
| rgrover1 | 257:7a50601356cc | 177 | * advertising payload proves to be too small. |
| rgrover1 | 257:7a50601356cc | 178 | * |
| rgrover1 | 257:7a50601356cc | 179 | * @param type The type which describes the variable length data. |
| rgrover1 | 257:7a50601356cc | 180 | * @param data data bytes. |
| rgrover1 | 257:7a50601356cc | 181 | * @param len length of data. |
| rgrover1 | 257:7a50601356cc | 182 | */ |
| rgrover1 | 257:7a50601356cc | 183 | ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len); |
| rgrover1 | 257:7a50601356cc | 184 | |
| rgrover1 | 257:7a50601356cc | 185 | /** |
| rgrover1 | 257:7a50601356cc | 186 | * Accumulate a variable length byte-stream as an AD structure in the |
| rgrover1 | 257:7a50601356cc | 187 | * scanResponse payload. |
| rgrover1 | 257:7a50601356cc | 188 | * |
| rgrover1 | 257:7a50601356cc | 189 | * @param type The type which describes the variable length data. |
| rgrover1 | 257:7a50601356cc | 190 | * @param data data bytes. |
| rgrover1 | 257:7a50601356cc | 191 | * @param len length of data. |
| rgrover1 | 257:7a50601356cc | 192 | */ |
| rgrover1 | 257:7a50601356cc | 193 | ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len); |
| rgrover1 | 257:7a50601356cc | 194 | |
| rgrover1 | 257:7a50601356cc | 195 | /** |
| rgrover1 | 257:7a50601356cc | 196 | * Start advertising (GAP Discoverable, Connectable modes, Broadcast |
| rgrover1 | 257:7a50601356cc | 197 | * Procedure). |
| rgrover1 | 257:7a50601356cc | 198 | */ |
| rgrover1 | 257:7a50601356cc | 199 | ble_error_t startAdvertising(void); |
| rgrover1 | 257:7a50601356cc | 200 | |
| rgrover1 | 257:7a50601356cc | 201 | /** |
| rgrover1 | 257:7a50601356cc | 202 | * Stop advertising (GAP Discoverable, Connectable modes, Broadcast |
| rgrover1 | 257:7a50601356cc | 203 | * Procedure). |
| rgrover1 | 257:7a50601356cc | 204 | */ |
| rgrover1 | 257:7a50601356cc | 205 | ble_error_t stopAdvertising(void); |
| rgrover1 | 257:7a50601356cc | 206 | |
| rgrover1 | 257:7a50601356cc | 207 | ble_error_t disconnect(Gap::DisconnectionReason_t reason); |
| rgrover1 | 257:7a50601356cc | 208 | |
| rgrover1 | 257:7a50601356cc | 209 | /* APIs to set GAP callbacks. */ |
| rgrover1 | 257:7a50601356cc | 210 | void onTimeout(Gap::EventCallback_t timeoutCallback); |
| rgrover1 | 257:7a50601356cc | 211 | |
| rgrover1 | 257:7a50601356cc | 212 | void onConnection(Gap::ConnectionEventCallback_t connectionCallback); |
| rgrover1 | 257:7a50601356cc | 213 | /** |
| rgrover1 | 257:7a50601356cc | 214 | * Used to setup a callback for GAP disconnection. |
| rgrover1 | 257:7a50601356cc | 215 | */ |
| rgrover1 | 257:7a50601356cc | 216 | void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback); |
| rgrover1 | 257:7a50601356cc | 217 | |
| rgrover1 | 257:7a50601356cc | 218 | /** |
| rgrover1 | 257:7a50601356cc | 219 | * Append to a chain of callbacks to be invoked upon disconnection; these |
| rgrover1 | 257:7a50601356cc | 220 | * callbacks receive no context and are therefore different from the |
| rgrover1 | 257:7a50601356cc | 221 | * onDisconnection callback. |
| rgrover1 | 257:7a50601356cc | 222 | */ |
| rgrover1 | 257:7a50601356cc | 223 | template<typename T> |
| rgrover1 | 257:7a50601356cc | 224 | void addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)); |
| rgrover1 | 257:7a50601356cc | 225 | |
| rgrover1 | 257:7a50601356cc | 226 | /** |
| rgrover1 | 261:b275bfc773b9 | 227 | * Add a callback for the GATT event DATA_SENT (which is triggered when |
| rgrover1 | 261:b275bfc773b9 | 228 | * updates are sent out by GATT in the form of notifications). |
| rgrover1 | 259:a95264ad705c | 229 | * |
| rgrover1 | 259:a95264ad705c | 230 | * @Note: it is possible to chain together multiple onDataSent callbacks |
| rgrover1 | 259:a95264ad705c | 231 | * (potentially from different modules of an application) to receive updates |
| rgrover1 | 260:ea7f9f14cc15 | 232 | * to characteristics. |
| rgrover1 | 259:a95264ad705c | 233 | * |
| rgrover1 | 259:a95264ad705c | 234 | * @Note: it is also possible to setup a callback into a member function of |
| rgrover1 | 259:a95264ad705c | 235 | * some object. |
| rgrover1 | 257:7a50601356cc | 236 | */ |
| rgrover1 | 259:a95264ad705c | 237 | void onDataSent(void (*callback)(unsigned count)); |
| rgrover1 | 259:a95264ad705c | 238 | template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)); |
| rgrover1 | 257:7a50601356cc | 239 | |
| rgrover1 | 257:7a50601356cc | 240 | /** |
| rgrover1 | 257:7a50601356cc | 241 | * Setup a callback for when a characteristic has its value updated by a |
| rgrover1 | 257:7a50601356cc | 242 | * client. |
| rgrover1 | 257:7a50601356cc | 243 | * |
| rgrover1 | 257:7a50601356cc | 244 | * @Note: it is possible to chain together multiple onDataWritten callbacks |
| rgrover1 | 257:7a50601356cc | 245 | * (potentially from different modules of an application) to receive updates |
| rgrover1 | 257:7a50601356cc | 246 | * to characteristics. Many services, such as DFU and UART add their own |
| rgrover1 | 257:7a50601356cc | 247 | * onDataWritten callbacks behind the scenes to trap interesting events. |
| rgrover1 | 257:7a50601356cc | 248 | * |
| rgrover1 | 257:7a50601356cc | 249 | * @Note: it is also possible to setup a callback into a member function of |
| rgrover1 | 257:7a50601356cc | 250 | * some object. |
| rgrover1 | 257:7a50601356cc | 251 | */ |
| rgrover1 | 257:7a50601356cc | 252 | void onDataWritten(void (*callback)(const GattCharacteristicWriteCBParams *eventDataP)); |
| rgrover1 | 257:7a50601356cc | 253 | template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattCharacteristicWriteCBParams *context)); |
| rgrover1 | 257:7a50601356cc | 254 | |
| rgrover1 | 257:7a50601356cc | 255 | void onUpdatesEnabled(GattServer::EventCallback_t callback); |
| rgrover1 | 257:7a50601356cc | 256 | void onUpdatesDisabled(GattServer::EventCallback_t callback); |
| rgrover1 | 257:7a50601356cc | 257 | void onConfirmationReceived(GattServer::EventCallback_t callback); |
| rgrover1 | 257:7a50601356cc | 258 | |
| rgrover1 | 257:7a50601356cc | 259 | /** |
| rgrover1 | 257:7a50601356cc | 260 | * Add a service declaration to the local server ATT table. Also add the |
| rgrover1 | 257:7a50601356cc | 261 | * characteristics contained within. |
| rgrover1 | 257:7a50601356cc | 262 | */ |
| rgrover1 | 257:7a50601356cc | 263 | ble_error_t addService(GattService &service); |
| rgrover1 | 257:7a50601356cc | 264 | |
| rgrover1 | 257:7a50601356cc | 265 | Gap::GapState_t getGapState(void) const; |
| rgrover1 | 257:7a50601356cc | 266 | |
| rgrover1 | 257:7a50601356cc | 267 | /** |
| rgrover1 | 257:7a50601356cc | 268 | * @param[in/out] lengthP |
| rgrover1 | 257:7a50601356cc | 269 | * input: Length in bytes to be read, |
| rgrover1 | 257:7a50601356cc | 270 | * output: Total length of attribute value upon successful return. |
| rgrover1 | 257:7a50601356cc | 271 | */ |
| rgrover1 | 257:7a50601356cc | 272 | ble_error_t readCharacteristicValue(uint16_t handle, uint8_t *const buffer, uint16_t *const lengthP); |
| rgrover1 | 257:7a50601356cc | 273 | |
| rgrover1 | 257:7a50601356cc | 274 | /** |
| rgrover1 | 257:7a50601356cc | 275 | * @param localOnly |
| rgrover1 | 257:7a50601356cc | 276 | * Only update the characteristic locally regardless of notify/indicate flags in the CCCD. |
| rgrover1 | 257:7a50601356cc | 277 | */ |
| rgrover1 | 257:7a50601356cc | 278 | ble_error_t updateCharacteristicValue(uint16_t handle, const uint8_t *value, uint16_t size, bool localOnly = false); |
| rgrover1 | 257:7a50601356cc | 279 | |
| rgrover1 | 257:7a50601356cc | 280 | /** |
| rgrover1 | 257:7a50601356cc | 281 | * Yield control to the BLE stack or to other tasks waiting for events. This |
| rgrover1 | 257:7a50601356cc | 282 | * is a sleep function which will return when there is an application |
| rgrover1 | 257:7a50601356cc | 283 | * specific interrupt, but the MCU might wake up several times before |
| rgrover1 | 257:7a50601356cc | 284 | * returning (to service the stack). This is not always interchangeable with |
| rgrover1 | 257:7a50601356cc | 285 | * WFE(). |
| rgrover1 | 257:7a50601356cc | 286 | */ |
| rgrover1 | 257:7a50601356cc | 287 | void waitForEvent(void); |
| rgrover1 | 257:7a50601356cc | 288 | |
| rgrover1 | 257:7a50601356cc | 289 | ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params); |
| rgrover1 | 257:7a50601356cc | 290 | ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params); |
| rgrover1 | 257:7a50601356cc | 291 | ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params); |
| rgrover1 | 257:7a50601356cc | 292 | |
| rgrover1 | 257:7a50601356cc | 293 | /** |
| rgrover1 | 257:7a50601356cc | 294 | * This call allows the application to get the BLE stack version information. |
| rgrover1 | 257:7a50601356cc | 295 | * |
| rgrover1 | 257:7a50601356cc | 296 | * @return A pointer to a const string representing the version. |
| rgrover1 | 257:7a50601356cc | 297 | * Note: The string is owned by the BLE_API. |
| rgrover1 | 257:7a50601356cc | 298 | */ |
| rgrover1 | 257:7a50601356cc | 299 | const char *getVersion(void); |
| rgrover1 | 257:7a50601356cc | 300 | |
| rgrover1 | 257:7a50601356cc | 301 | /** |
| rgrover1 | 257:7a50601356cc | 302 | * Set the device name characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 303 | * @param deviceName The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string. |
| rgrover1 | 257:7a50601356cc | 304 | */ |
| rgrover1 | 257:7a50601356cc | 305 | ble_error_t setDeviceName(const uint8_t *deviceName); |
| rgrover1 | 257:7a50601356cc | 306 | |
| rgrover1 | 257:7a50601356cc | 307 | /** |
| rgrover1 | 257:7a50601356cc | 308 | * Get the value of the device name characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 309 | * @param[out] deviceName Pointer to an empty buffer where the UTF-8 *non NULL- |
| rgrover1 | 257:7a50601356cc | 310 | * terminated* string will be placed. Set this |
| rgrover1 | 257:7a50601356cc | 311 | * value to NULL in order to obtain the deviceName-length |
| rgrover1 | 257:7a50601356cc | 312 | * from the 'length' parameter. |
| rgrover1 | 257:7a50601356cc | 313 | * |
| rgrover1 | 257:7a50601356cc | 314 | * @param[in/out] lengthP (on input) Length of the buffer pointed to by deviceName; |
| rgrover1 | 257:7a50601356cc | 315 | * (on output) the complete device name length (without the |
| rgrover1 | 257:7a50601356cc | 316 | * null terminator). |
| rgrover1 | 257:7a50601356cc | 317 | * |
| rgrover1 | 257:7a50601356cc | 318 | * @note If the device name is longer than the size of the supplied buffer, |
| rgrover1 | 257:7a50601356cc | 319 | * length will return the complete device name length, |
| rgrover1 | 257:7a50601356cc | 320 | * and not the number of bytes actually returned in deviceName. |
| rgrover1 | 257:7a50601356cc | 321 | * The application may use this information to retry with a suitable buffer size. |
| rgrover1 | 257:7a50601356cc | 322 | * |
| rgrover1 | 257:7a50601356cc | 323 | * Sample use: |
| rgrover1 | 257:7a50601356cc | 324 | * uint8_t deviceName[20]; |
| rgrover1 | 257:7a50601356cc | 325 | * unsigned length = sizeof(deviceName); |
| rgrover1 | 257:7a50601356cc | 326 | * ble.getDeviceName(deviceName, &length); |
| rgrover1 | 257:7a50601356cc | 327 | * if (length < sizeof(deviceName)) { |
| rgrover1 | 257:7a50601356cc | 328 | * deviceName[length] = 0; |
| rgrover1 | 257:7a50601356cc | 329 | * } |
| rgrover1 | 257:7a50601356cc | 330 | * DEBUG("length: %u, deviceName: %s\r\n", length, deviceName); |
| rgrover1 | 257:7a50601356cc | 331 | */ |
| rgrover1 | 257:7a50601356cc | 332 | ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP); |
| rgrover1 | 257:7a50601356cc | 333 | |
| rgrover1 | 257:7a50601356cc | 334 | /** |
| rgrover1 | 257:7a50601356cc | 335 | * Set the appearance characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 336 | * @param[in] appearance The new value for the device-appearance. |
| rgrover1 | 257:7a50601356cc | 337 | */ |
| rgrover1 | 257:7a50601356cc | 338 | ble_error_t setAppearance(uint16_t appearance); |
| rgrover1 | 257:7a50601356cc | 339 | |
| rgrover1 | 257:7a50601356cc | 340 | /** |
| rgrover1 | 257:7a50601356cc | 341 | * Set the appearance characteristic in the GAP service. |
| rgrover1 | 257:7a50601356cc | 342 | * @param[out] appearance The new value for the device-appearance. |
| rgrover1 | 257:7a50601356cc | 343 | */ |
| rgrover1 | 257:7a50601356cc | 344 | ble_error_t getAppearance(uint16_t *appearanceP); |
| rgrover1 | 257:7a50601356cc | 345 | |
| rgrover1 | 257:7a50601356cc | 346 | /** |
| rgrover1 | 257:7a50601356cc | 347 | * Set the radio's transmit power. |
| rgrover1 | 257:7a50601356cc | 348 | * @param[in] txPower Radio transmit power in dBm. |
| rgrover1 | 257:7a50601356cc | 349 | */ |
| rgrover1 | 257:7a50601356cc | 350 | ble_error_t setTxPower(int8_t txPower); |
| rgrover1 | 257:7a50601356cc | 351 | |
| rgrover1 | 257:7a50601356cc | 352 | public: |
| rgrover1 | 257:7a50601356cc | 353 | BLEDevice() : transport(createBLEDeviceInstance()), advParams(), advPayload(), scanResponse(), needToSetAdvPayload(true) { |
| rgrover1 | 257:7a50601356cc | 354 | advPayload.clear(); |
| rgrover1 | 257:7a50601356cc | 355 | scanResponse.clear(); |
| rgrover1 | 257:7a50601356cc | 356 | } |
| rgrover1 | 257:7a50601356cc | 357 | |
| rgrover1 | 257:7a50601356cc | 358 | private: |
| rgrover1 | 257:7a50601356cc | 359 | BLEDeviceInstanceBase *const transport; /* the device specific backend */ |
| rgrover1 | 257:7a50601356cc | 360 | |
| rgrover1 | 257:7a50601356cc | 361 | GapAdvertisingParams advParams; |
| rgrover1 | 257:7a50601356cc | 362 | GapAdvertisingData advPayload; |
| rgrover1 | 257:7a50601356cc | 363 | GapAdvertisingData scanResponse; |
| rgrover1 | 257:7a50601356cc | 364 | |
| rgrover1 | 257:7a50601356cc | 365 | /* Accumulation of AD structures in the advertisement payload should |
| rgrover1 | 257:7a50601356cc | 366 | * eventually result in a call to the target's setAdvertisingData() before |
| rgrover1 | 257:7a50601356cc | 367 | * the server begins advertising. This flag marks the status of the pending update.*/ |
| rgrover1 | 257:7a50601356cc | 368 | bool needToSetAdvPayload; |
| rgrover1 | 257:7a50601356cc | 369 | |
| rgrover1 | 257:7a50601356cc | 370 | /** |
| rgrover1 | 257:7a50601356cc | 371 | * DEPRECATED |
| rgrover1 | 257:7a50601356cc | 372 | */ |
| rgrover1 | 257:7a50601356cc | 373 | public: |
| rgrover1 | 257:7a50601356cc | 374 | ble_error_t setAdvertisingData(const GapAdvertisingData &ADStructures, const GapAdvertisingData &scanResponse); |
| rgrover1 | 257:7a50601356cc | 375 | ble_error_t setAdvertisingData(const GapAdvertisingData &ADStructures); |
| rgrover1 | 257:7a50601356cc | 376 | |
| rgrover1 | 257:7a50601356cc | 377 | ble_error_t startAdvertising(const GapAdvertisingParams &advParams); |
| rgrover1 | 257:7a50601356cc | 378 | }; |
| rgrover1 | 257:7a50601356cc | 379 | |
| rgrover1 | 257:7a50601356cc | 380 | /* BLEDevice methods. Most of these simply forward the calls to the underlying |
| rgrover1 | 257:7a50601356cc | 381 | * transport.*/ |
| rgrover1 | 257:7a50601356cc | 382 | |
| rgrover1 | 257:7a50601356cc | 383 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 384 | BLEDevice::reset(void) |
| rgrover1 | 257:7a50601356cc | 385 | { |
| rgrover1 | 257:7a50601356cc | 386 | return transport->reset(); |
| rgrover1 | 257:7a50601356cc | 387 | } |
| rgrover1 | 257:7a50601356cc | 388 | |
| rgrover1 | 257:7a50601356cc | 389 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 390 | BLEDevice::shutdown(void) |
| rgrover1 | 257:7a50601356cc | 391 | { |
| rgrover1 | 257:7a50601356cc | 392 | clearAdvertisingPayload(); |
| rgrover1 | 257:7a50601356cc | 393 | return transport->shutdown(); |
| rgrover1 | 257:7a50601356cc | 394 | } |
| rgrover1 | 257:7a50601356cc | 395 | |
| rgrover1 | 257:7a50601356cc | 396 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 397 | BLEDevice::setAddress(Gap::addr_type_t type, const Gap::address_t address) |
| rgrover1 | 257:7a50601356cc | 398 | { |
| rgrover1 | 257:7a50601356cc | 399 | return transport->getGap().setAddress(type, address); |
| rgrover1 | 257:7a50601356cc | 400 | } |
| rgrover1 | 257:7a50601356cc | 401 | |
| rgrover1 | 257:7a50601356cc | 402 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 403 | BLEDevice::getAddress(Gap::addr_type_t *typeP, Gap::address_t address) |
| rgrover1 | 257:7a50601356cc | 404 | { |
| rgrover1 | 257:7a50601356cc | 405 | return transport->getGap().getAddress(typeP, address); |
| rgrover1 | 257:7a50601356cc | 406 | } |
| rgrover1 | 257:7a50601356cc | 407 | |
| rgrover1 | 257:7a50601356cc | 408 | inline void |
| rgrover1 | 257:7a50601356cc | 409 | BLEDevice::setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) |
| rgrover1 | 257:7a50601356cc | 410 | { |
| rgrover1 | 257:7a50601356cc | 411 | advParams.setAdvertisingType(advType); |
| rgrover1 | 257:7a50601356cc | 412 | } |
| rgrover1 | 257:7a50601356cc | 413 | |
| rgrover1 | 257:7a50601356cc | 414 | inline void |
| rgrover1 | 257:7a50601356cc | 415 | BLEDevice::setAdvertisingInterval(uint16_t interval) |
| rgrover1 | 257:7a50601356cc | 416 | { |
| rgrover1 | 257:7a50601356cc | 417 | advParams.setInterval(interval); |
| rgrover1 | 257:7a50601356cc | 418 | } |
| rgrover1 | 257:7a50601356cc | 419 | |
| rgrover1 | 257:7a50601356cc | 420 | inline void |
| rgrover1 | 257:7a50601356cc | 421 | BLEDevice::setAdvertisingTimeout(uint16_t timeout) |
| rgrover1 | 257:7a50601356cc | 422 | { |
| rgrover1 | 257:7a50601356cc | 423 | advParams.setTimeout(timeout); |
| rgrover1 | 257:7a50601356cc | 424 | } |
| rgrover1 | 257:7a50601356cc | 425 | |
| rgrover1 | 257:7a50601356cc | 426 | inline void |
| rgrover1 | 257:7a50601356cc | 427 | BLEDevice::setAdvertisingParams(const GapAdvertisingParams &newAdvParams) |
| rgrover1 | 257:7a50601356cc | 428 | { |
| rgrover1 | 257:7a50601356cc | 429 | advParams = newAdvParams; |
| rgrover1 | 257:7a50601356cc | 430 | } |
| rgrover1 | 257:7a50601356cc | 431 | |
| rgrover1 | 257:7a50601356cc | 432 | inline void |
| rgrover1 | 257:7a50601356cc | 433 | BLEDevice::clearAdvertisingPayload(void) |
| rgrover1 | 257:7a50601356cc | 434 | { |
| rgrover1 | 257:7a50601356cc | 435 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 436 | advPayload.clear(); |
| rgrover1 | 257:7a50601356cc | 437 | } |
| rgrover1 | 257:7a50601356cc | 438 | |
| rgrover1 | 257:7a50601356cc | 439 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 440 | BLEDevice::accumulateAdvertisingPayload(uint8_t flags) |
| rgrover1 | 257:7a50601356cc | 441 | { |
| rgrover1 | 257:7a50601356cc | 442 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 443 | return advPayload.addFlags(flags); |
| rgrover1 | 257:7a50601356cc | 444 | } |
| rgrover1 | 257:7a50601356cc | 445 | |
| rgrover1 | 257:7a50601356cc | 446 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 447 | BLEDevice::accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) |
| rgrover1 | 257:7a50601356cc | 448 | { |
| rgrover1 | 257:7a50601356cc | 449 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 450 | transport->getGap().setAppearance(app); |
| rgrover1 | 257:7a50601356cc | 451 | return advPayload.addAppearance(app); |
| rgrover1 | 257:7a50601356cc | 452 | } |
| rgrover1 | 257:7a50601356cc | 453 | |
| rgrover1 | 257:7a50601356cc | 454 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 455 | BLEDevice::accumulateAdvertisingPayloadTxPower(int8_t txPower) |
| rgrover1 | 257:7a50601356cc | 456 | { |
| rgrover1 | 257:7a50601356cc | 457 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 458 | return advPayload.addTxPower(txPower); |
| rgrover1 | 257:7a50601356cc | 459 | } |
| rgrover1 | 257:7a50601356cc | 460 | |
| rgrover1 | 257:7a50601356cc | 461 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 462 | BLEDevice::accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) |
| rgrover1 | 257:7a50601356cc | 463 | { |
| rgrover1 | 257:7a50601356cc | 464 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 465 | if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) { |
| rgrover1 | 257:7a50601356cc | 466 | transport->getGap().setDeviceName(data); |
| rgrover1 | 257:7a50601356cc | 467 | } |
| rgrover1 | 257:7a50601356cc | 468 | return advPayload.addData(type, data, len); |
| rgrover1 | 257:7a50601356cc | 469 | } |
| rgrover1 | 257:7a50601356cc | 470 | |
| rgrover1 | 257:7a50601356cc | 471 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 472 | BLEDevice::accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) |
| rgrover1 | 257:7a50601356cc | 473 | { |
| rgrover1 | 257:7a50601356cc | 474 | needToSetAdvPayload = true; |
| rgrover1 | 257:7a50601356cc | 475 | return scanResponse.addData(type, data, len); |
| rgrover1 | 257:7a50601356cc | 476 | } |
| rgrover1 | 257:7a50601356cc | 477 | |
| rgrover1 | 257:7a50601356cc | 478 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 479 | BLEDevice::setAdvertisingPayload(void) { |
| rgrover1 | 257:7a50601356cc | 480 | needToSetAdvPayload = false; |
| rgrover1 | 257:7a50601356cc | 481 | return transport->getGap().setAdvertisingData(advPayload, scanResponse); |
| rgrover1 | 257:7a50601356cc | 482 | } |
| rgrover1 | 257:7a50601356cc | 483 | |
| rgrover1 | 257:7a50601356cc | 484 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 485 | BLEDevice::startAdvertising(void) |
| rgrover1 | 257:7a50601356cc | 486 | { |
| rgrover1 | 257:7a50601356cc | 487 | ble_error_t rc; |
| rgrover1 | 257:7a50601356cc | 488 | if ((rc = transport->getGattServer().initializeGATTDatabase()) != BLE_ERROR_NONE) { |
| rgrover1 | 257:7a50601356cc | 489 | return rc; |
| rgrover1 | 257:7a50601356cc | 490 | } |
| rgrover1 | 257:7a50601356cc | 491 | if (needToSetAdvPayload) { |
| rgrover1 | 257:7a50601356cc | 492 | if ((rc = setAdvertisingPayload()) != BLE_ERROR_NONE) { |
| rgrover1 | 257:7a50601356cc | 493 | return rc; |
| rgrover1 | 257:7a50601356cc | 494 | } |
| rgrover1 | 257:7a50601356cc | 495 | } |
| rgrover1 | 257:7a50601356cc | 496 | |
| rgrover1 | 257:7a50601356cc | 497 | return transport->getGap().startAdvertising(advParams); |
| rgrover1 | 257:7a50601356cc | 498 | } |
| rgrover1 | 257:7a50601356cc | 499 | |
| rgrover1 | 257:7a50601356cc | 500 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 501 | BLEDevice::stopAdvertising(void) |
| rgrover1 | 257:7a50601356cc | 502 | { |
| rgrover1 | 257:7a50601356cc | 503 | return transport->getGap().stopAdvertising(); |
| rgrover1 | 257:7a50601356cc | 504 | } |
| rgrover1 | 257:7a50601356cc | 505 | |
| rgrover1 | 257:7a50601356cc | 506 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 507 | BLEDevice::disconnect(Gap::DisconnectionReason_t reason) |
| rgrover1 | 257:7a50601356cc | 508 | { |
| rgrover1 | 257:7a50601356cc | 509 | return transport->getGap().disconnect(reason); |
| rgrover1 | 257:7a50601356cc | 510 | } |
| rgrover1 | 257:7a50601356cc | 511 | |
| rgrover1 | 257:7a50601356cc | 512 | inline void |
| rgrover1 | 257:7a50601356cc | 513 | BLEDevice::onTimeout(Gap::EventCallback_t timeoutCallback) |
| rgrover1 | 257:7a50601356cc | 514 | { |
| rgrover1 | 257:7a50601356cc | 515 | transport->getGap().setOnTimeout(timeoutCallback); |
| rgrover1 | 257:7a50601356cc | 516 | } |
| rgrover1 | 257:7a50601356cc | 517 | |
| rgrover1 | 257:7a50601356cc | 518 | inline void |
| rgrover1 | 257:7a50601356cc | 519 | BLEDevice::onConnection(Gap::ConnectionEventCallback_t connectionCallback) |
| rgrover1 | 257:7a50601356cc | 520 | { |
| rgrover1 | 257:7a50601356cc | 521 | transport->getGap().setOnConnection(connectionCallback); |
| rgrover1 | 257:7a50601356cc | 522 | } |
| rgrover1 | 257:7a50601356cc | 523 | |
| rgrover1 | 257:7a50601356cc | 524 | inline void |
| rgrover1 | 257:7a50601356cc | 525 | BLEDevice::onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) |
| rgrover1 | 257:7a50601356cc | 526 | { |
| rgrover1 | 257:7a50601356cc | 527 | transport->getGap().setOnDisconnection(disconnectionCallback); |
| rgrover1 | 257:7a50601356cc | 528 | } |
| rgrover1 | 257:7a50601356cc | 529 | |
| rgrover1 | 257:7a50601356cc | 530 | template<typename T> |
| rgrover1 | 257:7a50601356cc | 531 | inline void |
| rgrover1 | 257:7a50601356cc | 532 | BLEDevice::addToDisconnectionCallChain(T *tptr, void (T::*mptr)(void)) { |
| rgrover1 | 257:7a50601356cc | 533 | transport->getGap().addToDisconnectionCallChain(tptr, mptr); |
| rgrover1 | 257:7a50601356cc | 534 | } |
| rgrover1 | 257:7a50601356cc | 535 | |
| rgrover1 | 257:7a50601356cc | 536 | inline void |
| rgrover1 | 259:a95264ad705c | 537 | BLEDevice::onDataSent(void (*callback)(unsigned count)) { |
| rgrover1 | 257:7a50601356cc | 538 | transport->getGattServer().setOnDataSent(callback); |
| rgrover1 | 257:7a50601356cc | 539 | } |
| rgrover1 | 257:7a50601356cc | 540 | |
| rgrover1 | 259:a95264ad705c | 541 | template <typename T> inline void |
| rgrover1 | 259:a95264ad705c | 542 | BLEDevice::onDataSent(T *objPtr, void (T::*memberPtr)(unsigned count)) { |
| rgrover1 | 259:a95264ad705c | 543 | transport->getGattServer().setOnDataSent(objPtr, memberPtr); |
| rgrover1 | 259:a95264ad705c | 544 | } |
| rgrover1 | 259:a95264ad705c | 545 | |
| rgrover1 | 257:7a50601356cc | 546 | inline void |
| rgrover1 | 257:7a50601356cc | 547 | BLEDevice::onDataWritten(void (*callback)(const GattCharacteristicWriteCBParams *eventDataP)) { |
| rgrover1 | 257:7a50601356cc | 548 | transport->getGattServer().setOnDataWritten(callback); |
| rgrover1 | 257:7a50601356cc | 549 | } |
| rgrover1 | 257:7a50601356cc | 550 | |
| rgrover1 | 257:7a50601356cc | 551 | template <typename T> inline void |
| rgrover1 | 257:7a50601356cc | 552 | BLEDevice::onDataWritten(T *objPtr, void (T::*memberPtr)(const GattCharacteristicWriteCBParams *context)) { |
| rgrover1 | 257:7a50601356cc | 553 | transport->getGattServer().setOnDataWritten(objPtr, memberPtr); |
| rgrover1 | 257:7a50601356cc | 554 | } |
| rgrover1 | 257:7a50601356cc | 555 | |
| rgrover1 | 257:7a50601356cc | 556 | inline void |
| rgrover1 | 257:7a50601356cc | 557 | BLEDevice::onUpdatesEnabled(GattServer::EventCallback_t callback) |
| rgrover1 | 257:7a50601356cc | 558 | { |
| rgrover1 | 257:7a50601356cc | 559 | transport->getGattServer().setOnUpdatesEnabled(callback); |
| rgrover1 | 257:7a50601356cc | 560 | } |
| rgrover1 | 257:7a50601356cc | 561 | |
| rgrover1 | 257:7a50601356cc | 562 | inline void |
| rgrover1 | 257:7a50601356cc | 563 | BLEDevice::onUpdatesDisabled(GattServer::EventCallback_t callback) |
| rgrover1 | 257:7a50601356cc | 564 | { |
| rgrover1 | 257:7a50601356cc | 565 | transport->getGattServer().setOnUpdatesDisabled(callback); |
| rgrover1 | 257:7a50601356cc | 566 | } |
| rgrover1 | 257:7a50601356cc | 567 | |
| rgrover1 | 257:7a50601356cc | 568 | inline void |
| rgrover1 | 257:7a50601356cc | 569 | BLEDevice::onConfirmationReceived(GattServer::EventCallback_t callback) |
| rgrover1 | 257:7a50601356cc | 570 | { |
| rgrover1 | 257:7a50601356cc | 571 | transport->getGattServer().setOnConfirmationReceived(callback); |
| rgrover1 | 257:7a50601356cc | 572 | } |
| rgrover1 | 257:7a50601356cc | 573 | |
| rgrover1 | 257:7a50601356cc | 574 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 575 | BLEDevice::addService(GattService &service) |
| rgrover1 | 257:7a50601356cc | 576 | { |
| rgrover1 | 257:7a50601356cc | 577 | return transport->getGattServer().addService(service); |
| rgrover1 | 257:7a50601356cc | 578 | } |
| rgrover1 | 257:7a50601356cc | 579 | |
| rgrover1 | 257:7a50601356cc | 580 | inline Gap::GapState_t |
| rgrover1 | 257:7a50601356cc | 581 | BLEDevice::getGapState(void) const |
| rgrover1 | 257:7a50601356cc | 582 | { |
| rgrover1 | 257:7a50601356cc | 583 | return transport->getGap().getState(); |
| rgrover1 | 257:7a50601356cc | 584 | } |
| rgrover1 | 257:7a50601356cc | 585 | |
| rgrover1 | 257:7a50601356cc | 586 | inline ble_error_t BLEDevice::readCharacteristicValue(uint16_t handle, uint8_t *const buffer, uint16_t *const lengthP) |
| rgrover1 | 257:7a50601356cc | 587 | { |
| rgrover1 | 257:7a50601356cc | 588 | return transport->getGattServer().readValue(handle, buffer, lengthP); |
| rgrover1 | 257:7a50601356cc | 589 | } |
| rgrover1 | 257:7a50601356cc | 590 | |
| rgrover1 | 257:7a50601356cc | 591 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 592 | BLEDevice::updateCharacteristicValue(uint16_t handle, const uint8_t *value, uint16_t size, bool localOnly) |
| rgrover1 | 257:7a50601356cc | 593 | { |
| rgrover1 | 257:7a50601356cc | 594 | return transport->getGattServer().updateValue(handle, const_cast<uint8_t *>(value), size, localOnly); |
| rgrover1 | 257:7a50601356cc | 595 | } |
| rgrover1 | 257:7a50601356cc | 596 | |
| rgrover1 | 257:7a50601356cc | 597 | inline void |
| rgrover1 | 257:7a50601356cc | 598 | BLEDevice::waitForEvent(void) |
| rgrover1 | 257:7a50601356cc | 599 | { |
| rgrover1 | 257:7a50601356cc | 600 | transport->waitForEvent(); |
| rgrover1 | 257:7a50601356cc | 601 | } |
| rgrover1 | 257:7a50601356cc | 602 | |
| rgrover1 | 257:7a50601356cc | 603 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 604 | BLEDevice::getPreferredConnectionParams(Gap::ConnectionParams_t *params) |
| rgrover1 | 257:7a50601356cc | 605 | { |
| rgrover1 | 257:7a50601356cc | 606 | return transport->getGap().getPreferredConnectionParams(params); |
| rgrover1 | 257:7a50601356cc | 607 | } |
| rgrover1 | 257:7a50601356cc | 608 | |
| rgrover1 | 257:7a50601356cc | 609 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 610 | BLEDevice::setPreferredConnectionParams(const Gap::ConnectionParams_t *params) |
| rgrover1 | 257:7a50601356cc | 611 | { |
| rgrover1 | 257:7a50601356cc | 612 | return transport->getGap().setPreferredConnectionParams(params); |
| rgrover1 | 257:7a50601356cc | 613 | } |
| rgrover1 | 257:7a50601356cc | 614 | |
| rgrover1 | 257:7a50601356cc | 615 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 616 | BLEDevice::updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) { |
| rgrover1 | 257:7a50601356cc | 617 | return transport->getGap().updateConnectionParams(handle, params); |
| rgrover1 | 257:7a50601356cc | 618 | } |
| rgrover1 | 257:7a50601356cc | 619 | |
| rgrover1 | 257:7a50601356cc | 620 | inline const char * |
| rgrover1 | 257:7a50601356cc | 621 | BLEDevice::getVersion(void) |
| rgrover1 | 257:7a50601356cc | 622 | { |
| rgrover1 | 257:7a50601356cc | 623 | return transport->getVersion(); |
| rgrover1 | 257:7a50601356cc | 624 | } |
| rgrover1 | 257:7a50601356cc | 625 | |
| rgrover1 | 257:7a50601356cc | 626 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 627 | BLEDevice::setDeviceName(const uint8_t *deviceName) |
| rgrover1 | 257:7a50601356cc | 628 | { |
| rgrover1 | 257:7a50601356cc | 629 | return transport->getGap().setDeviceName(deviceName); |
| rgrover1 | 257:7a50601356cc | 630 | } |
| rgrover1 | 257:7a50601356cc | 631 | |
| rgrover1 | 257:7a50601356cc | 632 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 633 | BLEDevice::getDeviceName(uint8_t *deviceName, unsigned *lengthP) |
| rgrover1 | 257:7a50601356cc | 634 | { |
| rgrover1 | 257:7a50601356cc | 635 | return transport->getGap().getDeviceName(deviceName, lengthP); |
| rgrover1 | 257:7a50601356cc | 636 | } |
| rgrover1 | 257:7a50601356cc | 637 | |
| rgrover1 | 257:7a50601356cc | 638 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 639 | BLEDevice::setAppearance(uint16_t appearance) |
| rgrover1 | 257:7a50601356cc | 640 | { |
| rgrover1 | 257:7a50601356cc | 641 | return transport->getGap().setAppearance(appearance); |
| rgrover1 | 257:7a50601356cc | 642 | } |
| rgrover1 | 257:7a50601356cc | 643 | |
| rgrover1 | 257:7a50601356cc | 644 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 645 | BLEDevice::getAppearance(uint16_t *appearanceP) |
| rgrover1 | 257:7a50601356cc | 646 | { |
| rgrover1 | 257:7a50601356cc | 647 | return transport->getGap().getAppearance(appearanceP); |
| rgrover1 | 257:7a50601356cc | 648 | } |
| rgrover1 | 257:7a50601356cc | 649 | |
| rgrover1 | 257:7a50601356cc | 650 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 651 | BLEDevice::setTxPower(int8_t txPower) |
| rgrover1 | 257:7a50601356cc | 652 | { |
| rgrover1 | 257:7a50601356cc | 653 | return transport->setTxPower(txPower); |
| rgrover1 | 257:7a50601356cc | 654 | } |
| rgrover1 | 257:7a50601356cc | 655 | |
| rgrover1 | 257:7a50601356cc | 656 | /* |
| rgrover1 | 257:7a50601356cc | 657 | * ALL OF THE FOLLOWING METHODS ARE DEPRECATED |
| rgrover1 | 257:7a50601356cc | 658 | */ |
| rgrover1 | 257:7a50601356cc | 659 | |
| rgrover1 | 257:7a50601356cc | 660 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 661 | BLEDevice::setAdvertisingData(const GapAdvertisingData &ADStructures, const GapAdvertisingData &scanResponse) |
| rgrover1 | 257:7a50601356cc | 662 | { |
| rgrover1 | 257:7a50601356cc | 663 | needToSetAdvPayload = false; |
| rgrover1 | 257:7a50601356cc | 664 | return transport->getGap().setAdvertisingData(ADStructures, scanResponse); |
| rgrover1 | 257:7a50601356cc | 665 | } |
| rgrover1 | 257:7a50601356cc | 666 | |
| rgrover1 | 257:7a50601356cc | 667 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 668 | BLEDevice::setAdvertisingData(const GapAdvertisingData &ADStructures) |
| rgrover1 | 257:7a50601356cc | 669 | { |
| rgrover1 | 257:7a50601356cc | 670 | GapAdvertisingData scanResponse; |
| rgrover1 | 257:7a50601356cc | 671 | |
| rgrover1 | 257:7a50601356cc | 672 | needToSetAdvPayload = false; |
| rgrover1 | 257:7a50601356cc | 673 | return transport->getGap().setAdvertisingData(ADStructures, scanResponse); |
| rgrover1 | 257:7a50601356cc | 674 | } |
| rgrover1 | 257:7a50601356cc | 675 | |
| rgrover1 | 257:7a50601356cc | 676 | inline ble_error_t |
| rgrover1 | 257:7a50601356cc | 677 | BLEDevice::startAdvertising(const GapAdvertisingParams &_advParams) |
| rgrover1 | 257:7a50601356cc | 678 | { |
| rgrover1 | 257:7a50601356cc | 679 | return transport->getGap().startAdvertising(_advParams); |
| rgrover1 | 257:7a50601356cc | 680 | } |
| rgrover1 | 257:7a50601356cc | 681 | |
| rgrover1 | 257:7a50601356cc | 682 | #endif // ifndef __BLE_DEVICE__ |