Diff: Drivers/MaximSensor/MaximSensor.cpp

Revision:

1:f60eafbf009a

Child:

3:2fe2ff1ca0dc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Drivers/MaximSensor/MaximSensor.cpp	Wed Apr 10 14:56:25 2019 +0300
@@ -0,0 +1,174 @@
+#include "MaximSensor.h"
+#include "Peripherals.h"
+
+	/* PUBLIC FUNCTION DECLARATIONS */
+	/**
+	* @brief	Reads from register.
+	* @details	Reads specific Maxim Sensor register via SPI bus.
+	*
+	* @param[in]	reg Beginning address of a register to be read.
+	* @param[out]	data Buffer space to save result value.
+	* @param[in]	len Number of consecutive bytes to be read.
+	*
+	* @returns	0 on success, negative error code on failure.
+	*/
+int MaximSensor::readRegister(uint8_t reg, uint8_t *data, int len){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+	/**
+	* @brief	Writes data to Maxim Sensor register.
+	* @details	Writes data to specific Maxim Sensor register via SPI bus.
+	*
+	* @param[in]	reg Address of a register to be wrote.
+	* @param[in]	data Data to write on register.
+	*
+	* @returns	0 on success, negative error code on failure.
+	*/
+int MaximSensor::writeRegister(uint8_t reg,	const uint8_t data){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+	/**
+	* @brief	Get Maxim Sensor part and revision info.
+	* @details	Reads Maxim Sensor part and revision info from device.
+	*
+	* @param[in]	reg Beginning address of a register to be read.
+	* @param[out]	data Buffer space to save result value.
+	* @param[in]	len Number of consecutive bytes to be read.
+	*
+	* @returns	0 on success, negative error code on failure.
+	*/
+int MaximSensor::get_part_info(uint8_t *part_id,	uint8_t *rev_id){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+	/**
+	* @brief	Enables Maxim Sensor.
+	* @details	Enable IRQ, enable LEDs, enable AGC
+	*
+	* @param[in]	enable Any value to enable, 0 to disable.
+	*
+	* @returns	0 on success, negative error code on failure.
+	*/
+int MaximSensor::sensor_enable(int enable){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+	/**
+	* @brief	Enables AGC.
+	* @details	Enable Maxim Sensor automatic gain controller.
+	*	AGC automatically adjusts sampling rates and LED currents to save energy.
+	*
+	* @param[in]	agc_enable Any value to enable, 0 to disable.
+	*
+	* @returns	0 on success, negative error code on failure.
+	*/
+int MaximSensor::agc_enable(int agc_enable){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+	/**
+	* @brief	Get sensor part name.
+	*
+	* @returns	Sensor part name string.
+	*/
+const char *MaximSensor::get_sensor_part_name(){
+	pr_err("Empty function is called");
+	return "";
+}
+#if 0
+int dump_registers(addr_val_pair *reg_values) {
+	pr_err("Empty function is called");
+	return 0;
+}
+#endif
+	/**
+	* @brief	Get sensor name.
+	*
+	* @returns	Sensor name string.
+	*/
+const char *MaximSensor::get_sensor_name(){
+	pr_err("Empty function is called");
+	return "";
+}
+
+
+/**
+* @brief	Get sensor ID.
+*
+* @returns	Sensor ID number.
+*/
+unsigned char MaximSensor::get_sensor_id() {
+
+	// Base class returns 255
+	return( 255 );
+
+}
+
+
+/**
+* @brief	Get sensor name.
+*
+* @returns	Sensor name string.
+*/
+const char *MaximSensor::get_sensor_algo_ver(){
+pr_err("Empty function is called");
+return "";
+}
+
+int MaximSensor::MS_Max30001_ECG_InitStart(uint8_t En_ecg, uint8_t Openp, uint8_t Openn,
+						 uint8_t Pol, uint8_t Calp_sel, uint8_t Caln_sel,
+									 uint8_t E_fit, uint8_t Rate, uint8_t Gain,
+									 uint8_t Dhpf, uint8_t Dlpf){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+int MaximSensor::MS_Max30001_ECG_Stop(){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+int MaximSensor::MS_Max30001_RtoR_InitStart(uint8_t En_rtor, uint8_t Wndw, uint8_t Gain,
+										    uint8_t Pavg, uint8_t Ptsf, uint8_t Hoff,
+											uint8_t Ravg, uint8_t Rhsf, uint8_t Clr_rrint){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+int MaximSensor::MS_Max30001_RtoR_Stop(){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+// Max30001 Interrupt Assignment Function
+int MaximSensor::MS_max30001_INT_assignment(uint8_t en_enint_loc,     uint8_t en_eovf_loc,  uint8_t en_fstint_loc,
+											uint8_t en_dcloffint_loc, uint8_t en_bint_loc,  uint8_t en_bovf_loc,
+									        uint8_t en_bover_loc,     uint8_t en_bundr_loc, uint8_t en_bcgmon_loc,
+									        uint8_t en_pint_loc,      uint8_t en_povf_loc,  uint8_t en_pedge_loc,
+									        uint8_t en_lonint_loc,    uint8_t en_rrint_loc, uint8_t en_samp_loc,
+									        uint8_t intb_Type,        uint8_t int2b_Type){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+int  MaximSensor::MS_max30001readRegister(uint8_t addr, uint32_t *return_data){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+int  MaximSensor::MS_max30001writeRegister(uint8_t addr, uint32_t data){
+	pr_err("Empty function is called");
+	return -1;
+}
+
+int MaximSensor::MS_max30001sync(){
+	pr_err("Empty MS_max30001sync is called");
+	return -1;
+}