Maxim Integrated
MAX77655 Low IQ SIMO PMIC with 4-Outputs Delivering up to 700mA Total Output Current Mbed Driver
Diff: MAX77655_regs.h
- Revision:
- 0:08f763822dd3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MAX77655_regs.h Tue Aug 23 18:11:21 2022 +0300
@@ -0,0 +1,445 @@
+/*******************************************************************************
+ * Copyright(C) Analog Devices Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files(the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Analog Devices Inc.
+ * shall not be used except as stated in the Analog Devices Inc.
+ * Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Analog Devices Inc.retains all ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MAX77655_REGS_H_
+#define MAX77655_REGS_H_
+
+/**
+ * @brief CNFG_GLBL_A Register
+ *
+ * Address : 0x00
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char dben_nen : 1; /**< Debounce Timer Enable for the nEN Pin. Bit 0.
+ 0x0: 100μs Debounce
+ 0x1: 30ms Debounce */
+ unsigned char nen_mode : 2; /**< nEN Input (ON-KEY) Default Configuration Mode. Bit 2:1.
+ 0b00 = Push-button mode
+ 0b01 = Slide-switch mode
+ 0b10 = Logic mode
+ 0b11 = Reserved */
+ unsigned char mrt : 1; /**< Manual Reset Time Configuration. Bit 3.
+ 0x0: Manual Reset Time is 16s.
+ 0x1: Manual Reset Time is 8s. */
+ unsigned char bias_lpm : 1; /**< Main Bias Low-Power Mode Software Request. Bit 4.
+ 0 = Main Bias requested to be in Normal-Power Mode by software.
+ 1 = Main Bias request to be in Low-Power Mode by software. */
+ unsigned char pu_dis : 1; /**< nEN Internal Pullup Resistor. Bit 5.
+ 0 = Strong internal nEN pullup (200kΩ)
+ 1 = Internal pullup disabled */
+ unsigned char rsvd : 2; /**< Reserved. Unutilized bit. Write to 0. Reads are don't care. Bit 7:6. */
+ } bits;
+} reg_cnfg_glbl_a_t;
+
+/**
+ * @brief CNFG_GLBL_B Register
+ *
+ * Address : 0x01
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char sft_ctrl : 3; /**< Software Control Functions. Bit 2:0.
+ 0x0: No Action
+ 0x1: Software Cold Reset (SFT_CRST). The device powers down, resets, and then powers up again.
+ 0x2: Software Off (SFT_OFF). The device powers down, resets, and then remains off until a wake-up event.
+ 0x3: Software Standby (SFT_STBY). The device powers down and goes to standby mode.
+ 0x4: Software Exit Standby (SFT_EXIT_STBY). The device exits standby mode and powers up again.
+ 0x5 - 0x7: Reserved */
+ unsigned char rsvd : 5; /**< Reserved. Bit 7:3. Unutilized bit. Write to 0. Reads are don't care */
+ } bits;
+} reg_cnfg_glbl_b_t;
+
+/**
+ * @brief INT_GLBL Register
+ *
+ * Address : 0x02
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char nen_f : 1; /**< nEN Falling Interrupt.Bit 0.
+ 0 = No nEN falling edges have occurred since the last time this bit was read.
+ 1 = A nEN falling edge as occurred since the last time this bit was read. */
+ unsigned char nen_r : 1; /**< nEN Rising Interrupt. Bit 1.
+ 0 = No nEN rising edges have occurred since the last time this bit was read.
+ 1 = A nEN rising edge as occurred since the last time this bit was read. */
+ unsigned char tjal1_r : 1; /**< Thermal Alarm 1 Rising Interrupt. Bit 2.
+ 0 = The junction temperature has not risen above TJAL1 since the last time this bit was read.
+ 1 = The junction temperature has risen above TJAL1 since the last time this bit was read. */
+ unsigned char tjal2_r : 1; /**< Thermal Alarm 2 Rising Interrupt. Bit 3.
+ 0 = The junction temperature has not risen above TJAL2 since the last time this bit was read.
+ 1 = The junction temperature has risen above TJAL2 since the last time this bit was read. */
+ unsigned char sbb0_f : 1; /**< SBB0 Channel Fault Interrupt. Bit 4.
+ 0x0: SBB0 was not overloaded since the last time this bit was read.
+ 0x1: SBB0 was overloaded since the last time this bit was read. */
+ unsigned char sbb1_f : 1; /**< SBB1 Channel Fault Interrupt. Bit 5.
+ 0x0: SBB1 was not overloaded since the last time this bit was read.
+ 0x1: SBB1 was overloaded since the last time this bit was read. */
+ unsigned char sbb2_f : 1; /**< SBB2 Channel Fault Interrupt. Bit 6.
+ 0x0: SBB2 was not overloaded since the last time this bit was read.
+ 0x1: SBB2 was overloaded since the last time this bit was read. */
+ unsigned char sbb3_f : 1; /**< SBB3 Channel Fault Interrupt. Bit 7.
+ 0x0: SBB3 was not overloaded since the last time this bit was read.
+ 0x1: SBB3 was overloaded since the last time this bit was read. */
+ } bits;
+} reg_int_glbl0_t;
+
+/**
+ * @brief INTM_GLBL Register
+ *
+ * Address : 0x03
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char nen_fm : 1; /**< nEN Falling Interrupt Mask. Bit 0.
+ 0 = Unmasked. If nEN_F goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to nEN_F. */
+ unsigned char nen_rm : 1; /**< nEN Rising Interrupt Mask. Bit 1.
+ 0 = Unmasked. If nEN_R goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to nEN_R. */
+ unsigned char tjal1_rm : 1; /**< Thermal Alarm 1 Rising Interrupt Mask. Bit 2.
+ 0 = Unmasked. If TJAL1_R goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to TJAL1_R. */
+ unsigned char tjal2_rm : 1; /**< Thermal Alarm 2 Rising Interrupt Mask. Bit 3.
+ 0 = Unmasked. If TJAL2_R goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to TJAL2_R. */
+ unsigned char sbb0_fm : 1; /**< SBB0 Channel Fault Interrupt Mask. Bit 4.
+ 0 = Unmasked. If SBB0_FM goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to SBB0_FM. */
+ unsigned char sbb1_fm : 1; /**< SBB1 Channel Fault Interrupt Mask. Bit 5.
+ 0 = Unmasked. If SBB1_FM goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to SBB1_FM. */
+ unsigned char sbb2_fm : 1; /**< SBB2 Channel Fault Interrupt Mask. Bit 6.
+ 0 = Unmasked. If SBB2_FM goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to SBB2_FM. */
+ unsigned char sbb3_fm : 1; /**< SBB3 Channel Fault Interrupt Mask. Bit 7.
+ 0 = Unmasked. If SBB3_FM goes from 0 to 1, then nIRQ goes low.
+ nIRQ goes high when all interrupt bits are cleared.
+ 1 = Masked. nIRQ does not go low due to SBB3_FM. */
+ } bits;
+} reg_intm_glbl_t;
+
+/**
+ * @brief STAT_GLBL Register
+ *
+ * Address : 0x04
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char stat_en : 1; /**< Debounced Status for the nEN input. Bit 0.
+ 0 = nEN is not active (logic high)
+ 1 = nEN is active (logic low) */
+ unsigned char tjal1_s : 1; /**< Thermal Alarm 1 Status. Bit 1.
+ 0 = The junction temperature is less than TJAL1
+ 1 = The junction temperature is greater than TJAL1 */
+ unsigned char tjal2_s : 1; /**< Thermal Alarm 2 Status. Bit 2.
+ 0 = The junction temperature is less than TJAL2
+ 1 = The junction temperature is greater than TJAL2 */
+ unsigned char rsvd : 1; /**< Reserved. Unutilized bit. Write to 0. Reads are don't care. Bit 3. */
+ unsigned char sbb0_s : 1; /**< SBB0 Channel Regulation Status. Bit 4.
+ 0x0: SBB0 is overloaded or disabled
+ 0x1: SBB0 is not overloaded */
+ unsigned char sbb1_s : 1; /**< SBB1 Channel Regulation Status. Bit 5.
+ 0x0: SBB1 is overloaded or disabled
+ 0x1: SBB1 is not overloaded */
+ unsigned char sbb2_s : 1; /**< SBB2 Channel Regulation Status. Bit 6.
+ 0x0: SBB2 is overloaded or disabled
+ 0x1: SBB2 is not overloaded */
+ unsigned char sbb3_s : 1; /**< SBB3 Channel Regulation Status. Bit 7.
+ 0x0: SBB3 is overloaded or disabled
+ 0x1: SBB3 is not overloaded */
+ } bits;
+} reg_stat_glbl_t;
+
+/**
+ * @brief ERCFLAG Register
+ *
+ * Address : 0x05
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char tovld : 1; /**< Thermal Overload. Bit 0.
+ 0 = Thermal overload has not occurred since the last read of this register.
+ 1 = Thermal overload has occurred since the list read of this register.
+ This indicates that the junction temperature has exceeded 165ºC. */
+ unsigned char ovlo : 1; /**< Overvoltage Lockout. Bit 1.
+ 0 = The overvoltage lockout has not occurred since the last read of this register.
+ 1 = The overvoltage lockout has occurred since the last read of this register */
+ unsigned char uvlo : 1; /**< Undervoltage Lockout. Bit 2.
+ 0 = The undervoltage lockout has not occurred since the last read of this register.
+ 1 = The undervoltage lockout has occurred since the last read of this register */
+ unsigned char mrst : 1; /**< Manual Reset Timer. Bit 3.
+ 0 = A Manual Reset has not occurred since this last read of this register.
+ 1 = A Manual Reset has occurred since this last read of this register. */
+ unsigned char sft_off_f : 1; /**< Software Off Flag. Bit 4.
+ 0 = The SFT_OFF function has not occurred since the last read of this register.
+ 1 = The SFT_OFF function has occurred since the last read of this register. */
+ unsigned char sft_crst_f : 1; /**< Software Cold Reset Flag. Bit 5.
+ 0 = The software cold reset has not occurred since the last read of this register.
+ 1 = The software cold reset has occurred since the last read of this register. */
+ unsigned char rsvd : 2; /**< Reserved. Bit 7:6. Unutilized bit. Write to 0. Reads are don't care. */
+ } bits;
+} reg_ercflag_t;
+
+/**
+ * @brief CID Register
+ *
+ * Address : 0x06
+ */
+typedef union {
+ unsigned char raw;
+ struct {
+ unsigned char cid : 8; /**< Chip Identification Code. Bit 7:0.
+ The Chip Identification Code refers to a set of reset values in the register map, or the "OTP configuration.". */
+ } bits;
+} reg_cid_t;
+
+/**
+ * @brief CONFIG_SBB_TOP
+ *
+ * Address : 0x07
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char drv_sbb : 2; /**< SIMO Buck-Boost (all channels) Drive Strength Trim. Bit 1:0.
+ 0b00 = Fastest transition time (~0.6ns)
+ 0b01 = A little slower than 0b00 (~1.2ns)
+ 0b10 = A little slower than 0b01 (~1.8ns)
+ 0b11 = A little slower than 0b10 (~8ns) */
+ unsigned char rsvd : 6; /**< Bit 7:2.*/
+ } bits;
+} reg_config_sbb_top_t;
+
+/**
+ * @brief CNFG_SBB0_A
+ *
+ * Address : 0x08
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char tv_sbb0 : 8; /**< SIMO Buck-Boost Channel 0 Target Output Voltage. Bit 7:0.
+ 0x00 = 0.500V 0x01 = 0.525V 0x02 = 0.550V
+ 0x03 = 0.575V 0x04 = 0.600V 0x05 = 0.625V
+ 0x06 = 0.650V 0x07 = 0.675V 0x08 = 0.700V
+ ...
+ 0x8B: 3.975V
+ 0x8C: 4.000V
+ 0x8D–0xFF: Reserved */
+ } bits;
+} reg_cnfg_sbb0_a_t;
+
+/**
+ * @brief CNFG_SBB0_B
+ *
+ * Address : 0x09
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char en_sbb0 : 3; /**< Enable Control for SIMO Buck-Boost Channel 0,
+ selecting either an FPS slot the channel powers-up and powers-down in
+ or whether the channel is forced on or off. Bit 2:0.
+ 0b000 = FPS slot 0 0b001 = FPS slot 1
+ 0b010 = FPS slot 2 0b011 = FPS slot 3
+ 0b100 = Off irrespective of FPS
+ 0b101 = same as 0b100 0b110 = On irrespective of FPS
+ 0b111 = same as 0b110 */
+ unsigned char ade_sbb0 : 1; /**< SIMO Buck-Boost Channel 0 Active-Discharge Enable. Bit 3.
+ 0 = The active discharge function is disabled.
+ When SBB0 is disabled, its discharge rate is a function of the output capacitance and the external load.
+ 1 = The active discharge function is enabled.
+ When SBB0 is disabled, an internal resistor (RAD_SBB0) is activated from SBB0 to PGND to help the output voltage discharge. */
+ unsigned char rsvd1 : 2; /**< Reserved. Bit 5:4. Unutilized bit. They are don't care. */
+ unsigned char rsvd2 : 2; /**< Reserved. Bit 7:6. Unutilized bit. They are don't care. */
+ } bits;
+} reg_cnfg_sbb0_b_t;
+
+/**
+ * @brief CNFG_SBB1_A
+ *
+ * Address : 0x0A
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char tv_sbb1 : 8; /**< SIMO Buck-Boost Channel 1 Target Output Voltage. Bit 7:0.
+ 0x00 = 0.500V 0x01 = 0.525V 0x02 = 0.550V
+ 0x03 = 0.575V 0x04 = 0.600V 0x05 = 0.625V
+ 0x06 = 0.650V 0x07 = 0.675V 0x08 = 0.700V
+ ...
+ 0x8B: 3.975V
+ 0x8C: 4.000V
+ 0x8D–0xFF: Reserved */
+ } bits;
+} reg_cnfg_sbb1_a_t;
+
+/**
+ * @brief CNFG_SBB1_B
+ *
+ * Address : 0x0B
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char en_sbb1 : 3; /**< Enable Control for SIMO Buck-Boost Channel 1,
+ selecting either an FPS slot the channel powers-up and powers-down in
+ or whether the channel is forced on or off. Bit 2:0.
+ 0b000 = FPS slot 0 0b001 = FPS slot 1
+ 0b010 = FPS slot 2 0b011 = FPS slot 3
+ 0b100 = Off irrespective of FPS
+ 0b101 = same as 0b100 0b110 = On irrespective of FPS
+ 0b111 = same as 0b110 */
+ unsigned char ade_sbb1 : 1; /**< SIMO Buck-Boost Channel 1 Active-Discharge Enable. Bit 3.
+ 0 = The active discharge function is disabled.
+ When SBB1 is disabled, its discharge rate is a function of the output capacitance and the external load.
+ 1 = The active discharge function is enabled.
+ When SBB1 is disabled, an internal resistor (RAD_SBB1) is activated from SBB0 to PGND to help the output voltage discharge. */
+ unsigned char rsvd1 : 2; /**< Reserved. Bit 5:4. Unutilized bit. They are don't care. */
+ unsigned char rsvd2 : 2; /**< Reserved. Bit 7:6. Unutilized bit. They are don't care. */
+ } bits;
+} reg_cnfg_sbb1_b_t;
+
+/**
+ * @brief CNFG_SBB2_A
+ *
+ * Address : 0x0C
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char tv_sbb2 : 8; /**< SIMO Buck-Boost Channel 2 Target Output Voltage. Bit 7:0.
+ 0x00 = 0.500V 0x01 = 0.525V 0x02 = 0.550V
+ 0x03 = 0.575V 0x04 = 0.600V 0x05 = 0.625V
+ 0x06 = 0.650V 0x07 = 0.675V 0x08 = 0.700V
+ ...
+ 0x8B: 3.975V
+ 0x8C: 4.000V
+ 0x8D–0xFF: Reserved */
+ } bits;
+} reg_cnfg_sbb2_a_t;
+
+/**
+ * @brief CNFG_SBB2_B
+ *
+ * Address : 0x0D
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char en_sbb2 : 3; /**< Enable Control for SIMO Buck-Boost Channel 2,
+ selecting either an FPS slot the channel powers-up and powers-down in
+ or whether the channel is forced on or off. Bit 2:0.
+ 0b000 = FPS slot 0 0b001 = FPS slot 1
+ 0b010 = FPS slot 2 0b011 = FPS slot 3
+ 0b100 = Off irrespective of FPS
+ 0b101 = same as 0b100 0b110 = On irrespective of FPS
+ 0b111 = same as 0b110 */
+ unsigned char ade_sbb2 : 1; /**< SIMO Buck-Boost Channel 2 Active-Discharge Enable Bit 3.
+ 0 = The active discharge function is disabled.
+ When SBB2 is disabled, its discharge rate is a function of the output capacitance and the external load.
+ 1 = The active discharge function is enabled.
+ When SBB2 is disabled, an internal resistor (RAD_SBB2) is activated from SBB0 to PGND to help the output voltage discharge. */
+ unsigned char rsvd1 : 2; /**< Reserved. Bit 5:4. Unutilized bit. They are don't care. */
+ unsigned char rsvd2 : 2; /**< Reserved. Bit 7:6. Unutilized bit. They are don't care. */
+ } bits;
+} reg_cnfg_sbb2_b_t;
+
+/**
+ * @brief CNFG_SBB3_A
+ *
+ * Address : 0x0E
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char tv_sbb3 : 8; /**< SIMO Buck-Boost Channel 3 Target Output Voltage. Bit 7:0.
+ 0x00 = 0.500V 0x01 = 0.525V 0x02 = 0.550V
+ 0x03 = 0.575V 0x04 = 0.600V 0x05 = 0.625V
+ 0x06 = 0.650V 0x07 = 0.675V 0x08 = 0.700V
+ ...
+ 0x8B: 3.975V
+ 0x8C: 4.000V
+ 0x8D–0xFF: Reserved */
+ } bits;
+} reg_cnfg_sbb3_a_t;
+
+/**
+ * @brief CNFG_SBB3_B
+ *
+ * Address : 0x0F
+ */
+typedef union {
+ unsigned char raw;
+ struct
+ {
+ unsigned char en_sbb3 : 3; /**< Enable Control for SIMO Buck-Boost Channel 3,
+ selecting either an FPS slot the channel powers-up and powers-down in
+ or whether the channel is forced on or off. Bit 2:0.
+ 0b000 = FPS slot 0 0b001 = FPS slot 1
+ 0b010 = FPS slot 2 0b011 = FPS slot 3
+ 0b100 = Off irrespective of FPS
+ 0b101 = same as 0b100 0b110 = On irrespective of FPS
+ 0b111 = same as 0b110 */
+ unsigned char ade_sbb3 : 1; /**< SIMO Buck-Boost Channel 3 Active-Discharge Enable Bit 3.
+ 0 = The active discharge function is disabled.
+ When SBB3 is disabled, its discharge rate is a function of the output capacitance and the external load.
+ 1 = The active discharge function is enabled.
+ When SBB3 is disabled, an internal resistor (RAD_SBB3) is activated from SBB0 to PGND to help the output voltage discharge. */
+ unsigned char rsvd1 : 2; /**< Reserved. Bit 5:4. Unutilized bit. They are don't care. */
+ unsigned char rsvd2 : 2; /**< Reserved. Bit 7:6. Unutilized bit. They are don't care. */
+ } bits;
+} reg_cnfg_sbb3_b_t;
+
+#endif /* MAX77655_REGS_H_ */