Maxim Integrated / Mbed 2 deprecated BLE_Thermometer

BLE demo for the Health-Thermometer service.

Dependencies:   BLE_API MaximBLE mbed

Fork of BLE_Thermometer by Bluetooth Low Energy

main.cpp@0:d01bde90471b, 2014-09-02 (annotated)

Committer:
rgrover1
Date:
Tue Sep 02 10:34:01 2014 +0000
Revision:
0:d01bde90471b
Child:
1:2deb859ed1a3
Initial attempt at a working heatlh-thermometer

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 0:d01bde90471b 1 /* mbed Microcontroller Library
rgrover1 0:d01bde90471b 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 0:d01bde90471b 3 *
rgrover1 0:d01bde90471b 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 0:d01bde90471b 5 * you may not use this file except in compliance with the License.
rgrover1 0:d01bde90471b 6 * You may obtain a copy of the License at
rgrover1 0:d01bde90471b 7 *
rgrover1 0:d01bde90471b 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 0:d01bde90471b 9 *
rgrover1 0:d01bde90471b 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 0:d01bde90471b 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 0:d01bde90471b 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 0:d01bde90471b 13 * See the License for the specific language governing permissions and
rgrover1 0:d01bde90471b 14 * limitations under the License.
rgrover1 0:d01bde90471b 15 */
rgrover1 0:d01bde90471b 16
rgrover1 0:d01bde90471b 17 #include "mbed.h"
rgrover1 0:d01bde90471b 18 #include "BLEDevice.h"
rgrover1 0:d01bde90471b 19 #include "HealthThermometerService.h"
rgrover1 0:d01bde90471b 20 #include "DHT.h"
rgrover1 0:d01bde90471b 21
rgrover1 0:d01bde90471b 22 BLEDevice ble;
rgrover1 0:d01bde90471b 23 DigitalOut led1(LED1);
rgrover1 0:d01bde90471b 24 DHT sensor(D10, DHT11);
rgrover1 0:d01bde90471b 25
rgrover1 0:d01bde90471b 26 #define NEED_CONSOLE_OUTPUT 0 /* Set this if you need debug messages on the console;
rgrover1 0:d01bde90471b 27 * it will have an impact on code-size and power consumption. */
rgrover1 0:d01bde90471b 28
rgrover1 0:d01bde90471b 29 #if NEED_CONSOLE_OUTPUT
rgrover1 0:d01bde90471b 30 Serial pc(USBTX, USBRX);
rgrover1 0:d01bde90471b 31 #define DEBUG(...) { pc.printf(__VA_ARGS__); }
rgrover1 0:d01bde90471b 32 #else
rgrover1 0:d01bde90471b 33 #define DEBUG(...) /* nothing */
rgrover1 0:d01bde90471b 34 #endif /* #if NEED_CONSOLE_OUTPUT */
rgrover1 0:d01bde90471b 35
rgrover1 0:d01bde90471b 36 const static char DEVICE_NAME[] = "Therm";
rgrover1 0:d01bde90471b 37 static const uint16_t uuid16_list[] = {GattService::UUID_HEALTH_THERMOMETER_SERVICE};
rgrover1 0:d01bde90471b 38 static volatile bool triggerSensorPolling = false;
rgrover1 0:d01bde90471b 39
rgrover1 0:d01bde90471b 40 void disconnectionCallback(Gap::Handle_t handle)
rgrover1 0:d01bde90471b 41 {
rgrover1 0:d01bde90471b 42 DEBUG("Disconnected handle %u!\n\r", handle);
rgrover1 0:d01bde90471b 43 DEBUG("Restarting the advertising process\n\r");
rgrover1 0:d01bde90471b 44 ble.startAdvertising();
rgrover1 0:d01bde90471b 45 }
rgrover1 0:d01bde90471b 46
rgrover1 0:d01bde90471b 47 void periodicCallback(void)
rgrover1 0:d01bde90471b 48 {
rgrover1 0:d01bde90471b 49 led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */
rgrover1 0:d01bde90471b 50
rgrover1 0:d01bde90471b 51 /* Note that the periodicCallback() executes in interrupt context, so it is safer to do
rgrover1 0:d01bde90471b 52 * heavy-weight sensor polling from the main thread. */
rgrover1 0:d01bde90471b 53 triggerSensorPolling = true;
rgrover1 0:d01bde90471b 54 }
rgrover1 0:d01bde90471b 55
rgrover1 0:d01bde90471b 56 int main(void)
rgrover1 0:d01bde90471b 57 {
rgrover1 0:d01bde90471b 58 led1 = 1;
rgrover1 0:d01bde90471b 59 Ticker ticker;
rgrover1 0:d01bde90471b 60 ticker.attach(periodicCallback, 1);
rgrover1 0:d01bde90471b 61
rgrover1 0:d01bde90471b 62 DEBUG("Initialising the nRF51822\n\r");
rgrover1 0:d01bde90471b 63 ble.init();
rgrover1 0:d01bde90471b 64 ble.onDisconnection(disconnectionCallback);
rgrover1 0:d01bde90471b 65
rgrover1 0:d01bde90471b 66 /* setup advertising */
rgrover1 0:d01bde90471b 67 ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
rgrover1 0:d01bde90471b 68 ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
rgrover1 0:d01bde90471b 69 ble.accumulateAdvertisingPayload(GapAdvertisingData::THERMOMETER_EAR);
rgrover1 0:d01bde90471b 70 ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
rgrover1 0:d01bde90471b 71 ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
rgrover1 0:d01bde90471b 72 ble.setAdvertisingInterval(1600); /* 1000ms; in multiples of 0.625ms. */
rgrover1 0:d01bde90471b 73 ble.startAdvertising();
rgrover1 0:d01bde90471b 74
rgrover1 0:d01bde90471b 75 float initialTemperature = 39.6;
rgrover1 0:d01bde90471b 76 HealthThermometerService thermometerService(ble, initialTemperature, HealthThermometerService::LOCATION_EAR);
rgrover1 0:d01bde90471b 77
rgrover1 0:d01bde90471b 78 int error = 0;
rgrover1 0:d01bde90471b 79 float c = 0.0f;
rgrover1 0:d01bde90471b 80
rgrover1 0:d01bde90471b 81 while (true) {
rgrover1 0:d01bde90471b 82 if (triggerSensorPolling) {
rgrover1 0:d01bde90471b 83 triggerSensorPolling = false;
rgrover1 0:d01bde90471b 84
rgrover1 0:d01bde90471b 85 /* Do blocking calls or whatever is necessary for sensor polling. */
rgrover1 0:d01bde90471b 86 /* In our case, we simply update the dummy HRM measurement. */
rgrover1 0:d01bde90471b 87 error = sensor.readData();
rgrover1 0:d01bde90471b 88 if (!error) {
rgrover1 0:d01bde90471b 89 c = sensor.ReadTemperature(CELCIUS);
rgrover1 0:d01bde90471b 90 thermometerService.updateTemperature(c);
rgrover1 0:d01bde90471b 91 }
rgrover1 0:d01bde90471b 92 } else {
rgrover1 0:d01bde90471b 93 ble.waitForEvent();
rgrover1 0:d01bde90471b 94 }
rgrover1 0:d01bde90471b 95 }
rgrover1 0:d01bde90471b 96 }