library for MAX14661 16:2 mux

Dependents:   ard2pmod MAX14661_Demo

MAX14661 Component Page

Committer:
j3
Date:
Fri Nov 21 04:31:05 2014 +0000
Revision:
4:45fa0192f66d
Parent:
2:88c168ddc145
Child:
6:be4f2d7fc054
changed input args to write fx from an array to two 16 bit ints that represent switch states for each bank.  Fixed C0PY_SHADOW to COPY_SHADOW

Who changed what in which revision?

UserRevisionLine numberNew contents of line
j3 0:c770ad7363c8 1 /******************************************************************//**
j3 0:c770ad7363c8 2 * @file max14661.cpp
j3 0:c770ad7363c8 3 *
j3 0:c770ad7363c8 4 * @author Justin Jordan
j3 0:c770ad7363c8 5 *
j3 0:c770ad7363c8 6 * @version 0.0
j3 0:c770ad7363c8 7 *
j3 0:c770ad7363c8 8 * Started: 11NOV14
j3 0:c770ad7363c8 9 *
j3 0:c770ad7363c8 10 * Updated:
j3 0:c770ad7363c8 11 *
j3 0:c770ad7363c8 12 * @brief Source file for MAX14661 class
j3 0:c770ad7363c8 13 *
j3 0:c770ad7363c8 14 ***********************************************************************
j3 0:c770ad7363c8 15 *
j3 0:c770ad7363c8 16 * @copyright
j3 0:c770ad7363c8 17 * Copyright (C) 2013 Maxim Integrated Products, Inc., All Rights Reserved.
j3 0:c770ad7363c8 18 *
j3 0:c770ad7363c8 19 * Permission is hereby granted, free of charge, to any person obtaining a
j3 0:c770ad7363c8 20 * copy of this software and associated documentation files (the "Software"),
j3 0:c770ad7363c8 21 * to deal in the Software without restriction, including without limitation
j3 0:c770ad7363c8 22 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
j3 0:c770ad7363c8 23 * and/or sell copies of the Software, and to permit persons to whom the
j3 0:c770ad7363c8 24 * Software is furnished to do so, subject to the following conditions:
j3 0:c770ad7363c8 25 *
j3 0:c770ad7363c8 26 * The above copyright notice and this permission notice shall be included
j3 0:c770ad7363c8 27 * in all copies or substantial portions of the Software.
j3 0:c770ad7363c8 28 *
j3 0:c770ad7363c8 29 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
j3 0:c770ad7363c8 30 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
j3 0:c770ad7363c8 31 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
j3 0:c770ad7363c8 32 * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
j3 0:c770ad7363c8 33 * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
j3 0:c770ad7363c8 34 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
j3 0:c770ad7363c8 35 * OTHER DEALINGS IN THE SOFTWARE.
j3 0:c770ad7363c8 36 *
j3 0:c770ad7363c8 37 * Except as contained in this notice, the name of Maxim Integrated
j3 0:c770ad7363c8 38 * Products, Inc. shall not be used except as stated in the Maxim Integrated
j3 0:c770ad7363c8 39 * Products, Inc. Branding Policy.
j3 0:c770ad7363c8 40 *
j3 0:c770ad7363c8 41 * The mere transfer of this software does not imply any licenses
j3 0:c770ad7363c8 42 * of trade secrets, proprietary technology, copyrights, patents,
j3 0:c770ad7363c8 43 * trademarks, maskwork rights, or any other form of intellectual
j3 0:c770ad7363c8 44 * property whatsoever. Maxim Integrated Products, Inc. retains all
j3 0:c770ad7363c8 45 * ownership rights.
j3 0:c770ad7363c8 46 **********************************************************************/
j3 0:c770ad7363c8 47
j3 0:c770ad7363c8 48
j3 0:c770ad7363c8 49 #include "max14661.h"
j3 0:c770ad7363c8 50
j3 0:c770ad7363c8 51
j3 2:88c168ddc145 52 /**********************************************************//**
j3 2:88c168ddc145 53 * Constructor for Max14661 Class
j3 0:c770ad7363c8 54 *
j3 0:c770ad7363c8 55 * On Entry:
j3 2:88c168ddc145 56 * @param[in] sda - sda pin of I2C bus
j3 2:88c168ddc145 57 * @param[in] scl - scl pin of I2C bus
j3 0:c770ad7363c8 58 * @param[in] i2c_adrs - 7-bit slave address of MAX14661
j3 0:c770ad7363c8 59 *
j3 0:c770ad7363c8 60 * On Exit:
j3 0:c770ad7363c8 61 * @return none
j3 0:c770ad7363c8 62 *
j3 0:c770ad7363c8 63 * Example:
j3 0:c770ad7363c8 64 * @code
j3 0:c770ad7363c8 65 *
j3 2:88c168ddc145 66 * //declare mux object
j3 2:88c168ddc145 67 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 0:c770ad7363c8 68 *
j3 0:c770ad7363c8 69 * @endcode
j3 2:88c168ddc145 70 **************************************************************/
j3 2:88c168ddc145 71 Max14661::Max14661(PinName sda, PinName scl, max14661_i2c_adrs_t i2c_adrs) :
j3 2:88c168ddc145 72 I2C(sda, scl)
j3 0:c770ad7363c8 73 {
j3 0:c770ad7363c8 74 w_adrs = (i2c_adrs << 1);
j3 0:c770ad7363c8 75 r_adrs = (w_adrs | 0x01);
j3 0:c770ad7363c8 76 }
j3 0:c770ad7363c8 77
j3 0:c770ad7363c8 78
j3 0:c770ad7363c8 79 /******************************************************************//**
j3 0:c770ad7363c8 80 * Writes given commands to CMD_A and CMD_B
j3 0:c770ad7363c8 81 *
j3 0:c770ad7363c8 82 * On Entry:
j3 0:c770ad7363c8 83 * @param[in] cmdA - command for CMD_A
j3 0:c770ad7363c8 84 * @param[in] cmdB - command for CMD_B
j3 0:c770ad7363c8 85 *
j3 0:c770ad7363c8 86 * On Exit:
j3 0:c770ad7363c8 87 * @return return value = 0 on success, non-0 on failure
j3 0:c770ad7363c8 88 *
j3 0:c770ad7363c8 89 * Example:
j3 0:c770ad7363c8 90 * @code
j3 0:c770ad7363c8 91 *
j3 2:88c168ddc145 92 * //declare mux object
j3 2:88c168ddc145 93 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 0:c770ad7363c8 94 *
j3 0:c770ad7363c8 95 * uint16_t rtn_val;
j3 0:c770ad7363c8 96 *
j3 0:c770ad7363c8 97 * rtn_val = mux.wrt_cmd_registers(DISABLE_BANK, DISABLE_BANK);
j3 0:c770ad7363c8 98 *
j3 0:c770ad7363c8 99 * @endcode
j3 0:c770ad7363c8 100 **********************************************************************/
j3 0:c770ad7363c8 101 uint16_t Max14661::wrt_cmd_registers(max14661_cmds_t cmdA,
j3 0:c770ad7363c8 102 max14661_cmds_t cmdB)
j3 0:c770ad7363c8 103 {
j3 0:c770ad7363c8 104 uint8_t data[3];
j3 0:c770ad7363c8 105 uint8_t data_length = 0;
j3 0:c770ad7363c8 106 uint16_t rtn_val = 1;
j3 0:c770ad7363c8 107
j3 0:c770ad7363c8 108 //build packet
j3 0:c770ad7363c8 109 data[data_length++] = CMD_A;
j3 0:c770ad7363c8 110 data[data_length++] = cmdA;
j3 0:c770ad7363c8 111 data[data_length++] = cmdB;
j3 0:c770ad7363c8 112
j3 2:88c168ddc145 113 rtn_val = write(w_adrs,(const char*) data, data_length);
j3 0:c770ad7363c8 114
j3 0:c770ad7363c8 115 return(rtn_val);
j3 0:c770ad7363c8 116 }
j3 0:c770ad7363c8 117
j3 0:c770ad7363c8 118
j3 0:c770ad7363c8 119 /******************************************************************//**
j3 4:45fa0192f66d 120 * Writes bankA and bankB to coresponding shadow registers
j3 0:c770ad7363c8 121 *
j3 0:c770ad7363c8 122 * On Entry:
j3 4:45fa0192f66d 123 * @param[in] bankA - binary representation of switch states
j3 4:45fa0192f66d 124 * @param[in] bankB - binary representation of switch states
j3 0:c770ad7363c8 125 *
j3 0:c770ad7363c8 126 * On Exit:
j3 0:c770ad7363c8 127 * @return return value = 0 on success, non-0 on failure
j3 0:c770ad7363c8 128 *
j3 0:c770ad7363c8 129 * Example:
j3 0:c770ad7363c8 130 * @code
j3 0:c770ad7363c8 131 *
j3 2:88c168ddc145 132 * //declare mux object
j3 2:88c168ddc145 133 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 0:c770ad7363c8 134 *
j3 4:45fa0192f66d 135 * uint16_t bankA = (SW12 | SW02); //example only
j3 4:45fa0192f66d 136 * uint16_t bankB = (SW11 | SW01);
j3 0:c770ad7363c8 137 * uint16_t rtn_val;
j3 0:c770ad7363c8 138 *
j3 0:c770ad7363c8 139 * //wite shadow registers
j3 4:45fa0192f66d 140 * rtn_val = mux.wrt_shadow_registers(bankA, bankB);
j3 0:c770ad7363c8 141 *
j3 0:c770ad7363c8 142 * @endcode
j3 0:c770ad7363c8 143 **********************************************************************/
j3 4:45fa0192f66d 144 uint16_t Max14661::wrt_shadow_registers(uint16_t bankA, uint16_t bankB)
j3 0:c770ad7363c8 145 {
j3 4:45fa0192f66d 146 uint8_t data[5];
j3 0:c770ad7363c8 147 uint8_t data_length = 0;
j3 0:c770ad7363c8 148 uint16_t rtn_val = 1;
j3 0:c770ad7363c8 149
j3 4:45fa0192f66d 150 data[data_length++] = SHDW0;
j3 4:45fa0192f66d 151 data[data_length++] = (bankA & 0x00FF);
j3 4:45fa0192f66d 152 data[data_length++] = ((bankA >> 8) & 0x00FF);
j3 4:45fa0192f66d 153 data[data_length++] = (bankB & 0x00FF);
j3 4:45fa0192f66d 154 data[data_length++] = ((bankB >> 8) & 0x00FF);
j3 0:c770ad7363c8 155
j3 4:45fa0192f66d 156 rtn_val = write(w_adrs,(const char*) data, data_length);
j3 0:c770ad7363c8 157
j3 0:c770ad7363c8 158 return(rtn_val);
j3 0:c770ad7363c8 159 }
j3 0:c770ad7363c8 160
j3 0:c770ad7363c8 161
j3 0:c770ad7363c8 162 /******************************************************************//**
j3 4:45fa0192f66d 163 * Writes bankA and bankB to coresponding direct access registers
j3 0:c770ad7363c8 164 *
j3 0:c770ad7363c8 165 * On Entry:
j3 4:45fa0192f66d 166 * @param[in] bankA - binary representation of switch states
j3 4:45fa0192f66d 167 * @param[in] bankB - binary representation of switch states
j3 0:c770ad7363c8 168 *
j3 0:c770ad7363c8 169 * On Exit:
j3 0:c770ad7363c8 170 * @return return value = 0 on success, non-0 on failure
j3 0:c770ad7363c8 171 *
j3 0:c770ad7363c8 172 * Example:
j3 1:c1fdfe4c2354 173 * @code
j3 0:c770ad7363c8 174 *
j3 2:88c168ddc145 175 * //declare mux object
j3 2:88c168ddc145 176 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 0:c770ad7363c8 177 *
j3 4:45fa0192f66d 178 * uint16_t bankA = (SW12 | SW02); //example only
j3 4:45fa0192f66d 179 * uint16_t bankB = (SW11 | SW01);
j3 0:c770ad7363c8 180 * uint16_t rtn_val;
j3 0:c770ad7363c8 181 *
j3 0:c770ad7363c8 182 * //wite shadow registers
j3 4:45fa0192f66d 183 * rtn_val = mux.wrt_dir_registers(bankA, bankB);
j3 0:c770ad7363c8 184 *
j3 0:c770ad7363c8 185 * @endcode
j3 0:c770ad7363c8 186 **********************************************************************/
j3 4:45fa0192f66d 187 uint16_t Max14661::wrt_dir_registers(uint16_t bankA, uint16_t bankB)
j3 0:c770ad7363c8 188 {
j3 4:45fa0192f66d 189 uint8_t data[5];
j3 0:c770ad7363c8 190 uint8_t data_length = 0;
j3 0:c770ad7363c8 191 uint16_t rtn_val = 1;
j3 0:c770ad7363c8 192
j3 4:45fa0192f66d 193 data[data_length++] = DIR0;
j3 4:45fa0192f66d 194 data[data_length++] = (bankA & 0x00FF);
j3 4:45fa0192f66d 195 data[data_length++] = ((bankA >> 8) & 0x00FF);
j3 4:45fa0192f66d 196 data[data_length++] = (bankB & 0x00FF);
j3 4:45fa0192f66d 197 data[data_length++] = ((bankB >> 8) & 0x00FF);
j3 4:45fa0192f66d 198
j3 4:45fa0192f66d 199 rtn_val = write(w_adrs,(const char*) data, data_length);
j3 0:c770ad7363c8 200
j3 4:45fa0192f66d 201 return(rtn_val);
j3 4:45fa0192f66d 202 }
j3 4:45fa0192f66d 203
j3 4:45fa0192f66d 204
j3 4:45fa0192f66d 205 /******************************************************************//**
j3 4:45fa0192f66d 206 * Writes bankA and bankB to coresponding shadow register and then
j3 4:45fa0192f66d 207 * issues copy command for both banks
j3 4:45fa0192f66d 208 *
j3 4:45fa0192f66d 209 * On Entry:
j3 4:45fa0192f66d 210 * @param[in] bankA - binary representation of switch states
j3 4:45fa0192f66d 211 * @param[in] bankB - binary representation of switch states
j3 4:45fa0192f66d 212 *
j3 4:45fa0192f66d 213 * On Exit:
j3 4:45fa0192f66d 214 * @return return value = 0 on success, non-0 on failure
j3 4:45fa0192f66d 215 *
j3 4:45fa0192f66d 216 * Example:
j3 4:45fa0192f66d 217 * @code
j3 4:45fa0192f66d 218 *
j3 4:45fa0192f66d 219 * //declare mux object
j3 4:45fa0192f66d 220 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 4:45fa0192f66d 221 *
j3 4:45fa0192f66d 222 * uint16_t bankA = (SW12 | SW02); //example only
j3 4:45fa0192f66d 223 * uint16_t bankB = (SW11 | SW01);
j3 4:45fa0192f66d 224 * uint16_t rtn_val;
j3 4:45fa0192f66d 225 *
j3 4:45fa0192f66d 226 * //wite shadow registers
j3 4:45fa0192f66d 227 * rtn_val = mux.set_switches(bankA, bankB);
j3 4:45fa0192f66d 228 *
j3 4:45fa0192f66d 229 * @endcode
j3 4:45fa0192f66d 230 **********************************************************************/
j3 4:45fa0192f66d 231 uint16_t Max14661::set_switches(uint16_t bankA, uint16_t bankB)
j3 4:45fa0192f66d 232 {
j3 4:45fa0192f66d 233 uint8_t data[7];
j3 4:45fa0192f66d 234 uint8_t data_length = 0;
j3 4:45fa0192f66d 235 uint16_t rtn_val = 1;
j3 0:c770ad7363c8 236
j3 4:45fa0192f66d 237 data[data_length++] = SHDW0;
j3 4:45fa0192f66d 238 data[data_length++] = (bankA & 0x00FF);
j3 4:45fa0192f66d 239 data[data_length++] = ((bankA >> 8) & 0x00FF);
j3 4:45fa0192f66d 240 data[data_length++] = (bankB & 0x00FF);
j3 4:45fa0192f66d 241 data[data_length++] = ((bankB >> 8) & 0x00FF);
j3 4:45fa0192f66d 242 data[data_length++] = COPY_SHADOW;
j3 4:45fa0192f66d 243 data[data_length++] = COPY_SHADOW;
j3 4:45fa0192f66d 244
j3 4:45fa0192f66d 245 rtn_val = write(w_adrs,(const char*) data, data_length);
j3 0:c770ad7363c8 246
j3 0:c770ad7363c8 247 return(rtn_val);
j3 0:c770ad7363c8 248 }
j3 0:c770ad7363c8 249
j3 0:c770ad7363c8 250
j3 0:c770ad7363c8 251 /**********************************************************//**
j3 0:c770ad7363c8 252 * Reads data from direct access registers starting at DIR0 and
j3 0:c770ad7363c8 253 * stores it in byte array pointed at by 'data'
j3 0:c770ad7363c8 254 *
j3 0:c770ad7363c8 255 * On Entry:
j3 0:c770ad7363c8 256 * @param[in] data - pointer to byte array for storing data
j3 0:c770ad7363c8 257 *
j3 0:c770ad7363c8 258 * On Exit:
j3 0:c770ad7363c8 259 * @param[out] data - data buffer now contains data read
j3 0:c770ad7363c8 260 * from dir registers
j3 0:c770ad7363c8 261 * @return return value = 0 on success, non-0 on failure
j3 0:c770ad7363c8 262 *
j3 0:c770ad7363c8 263 * Example:
j3 0:c770ad7363c8 264 * @code
j3 0:c770ad7363c8 265 *
j3 2:88c168ddc145 266 * //declare mux object
j3 2:88c168ddc145 267 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 0:c770ad7363c8 268 *
j3 0:c770ad7363c8 269 * uint16_t rtn_val;
j3 0:c770ad7363c8 270 * uint8_t data[4];
j3 0:c770ad7363c8 271 *
j3 0:c770ad7363c8 272 * //read direct access registers
j3 0:c770ad7363c8 273 * rtn_val = mux.rd_dir_registers(data);
j3 0:c770ad7363c8 274 *
j3 0:c770ad7363c8 275 * @endcode
j3 0:c770ad7363c8 276 **********************************************************************/
j3 0:c770ad7363c8 277 uint16_t Max14661::rd_dir_registers(uint8_t* data)
j3 0:c770ad7363c8 278 {
j3 0:c770ad7363c8 279 uint16_t rtn_val = 1;
j3 0:c770ad7363c8 280 uint8_t local_data = DIR0;
j3 0:c770ad7363c8 281
j3 2:88c168ddc145 282 rtn_val = write(w_adrs,(const char*) local_data, 1);
j3 0:c770ad7363c8 283
j3 0:c770ad7363c8 284 if(!rtn_val)
j3 0:c770ad7363c8 285 {
j3 2:88c168ddc145 286 rtn_val = read(r_adrs,(char*) data, 4);
j3 0:c770ad7363c8 287 }
j3 0:c770ad7363c8 288
j3 0:c770ad7363c8 289 return(rtn_val);
j3 0:c770ad7363c8 290 }
j3 0:c770ad7363c8 291
j3 0:c770ad7363c8 292
j3 0:c770ad7363c8 293 /**********************************************************//**
j3 0:c770ad7363c8 294 * Reads data from shadow registers starting at SHDW0 and stores
j3 0:c770ad7363c8 295 * it in byte array pointed at by 'data'
j3 0:c770ad7363c8 296 *
j3 0:c770ad7363c8 297 * On Entry:
j3 0:c770ad7363c8 298 * @param[in] data - pointer to byte array for storing data
j3 0:c770ad7363c8 299 *
j3 0:c770ad7363c8 300 * On Exit:
j3 0:c770ad7363c8 301 * @param[out] data - data buffer now contains data read
j3 0:c770ad7363c8 302 * from shadow registers
j3 0:c770ad7363c8 303 * @return return value = 0 on success, non-0 on failure
j3 0:c770ad7363c8 304 *
j3 0:c770ad7363c8 305 * Example:
j3 0:c770ad7363c8 306 * @code
j3 0:c770ad7363c8 307 *
j3 2:88c168ddc145 308 * //declare mux object
j3 2:88c168ddc145 309 * Max14661 mux(D14, D15, MAX14661_I2C_ADRS0);
j3 0:c770ad7363c8 310 *
j3 0:c770ad7363c8 311 * uint16_t rtn_val;
j3 0:c770ad7363c8 312 * uint8_t data[4];
j3 0:c770ad7363c8 313 *
j3 0:c770ad7363c8 314 * //read shadow registers
j3 0:c770ad7363c8 315 * rtn_val = mux.rd_shadow_registers(data);
j3 0:c770ad7363c8 316 *
j3 0:c770ad7363c8 317 * @endcode
j3 2:88c168ddc145 318 **************************************************************/
j3 0:c770ad7363c8 319 uint16_t Max14661::rd_shadow_registers(uint8_t* data)
j3 0:c770ad7363c8 320 {
j3 0:c770ad7363c8 321 uint16_t rtn_val = 1;
j3 0:c770ad7363c8 322 uint8_t local_data = SHDW0;
j3 0:c770ad7363c8 323
j3 2:88c168ddc145 324 rtn_val = write(w_adrs,(const char*) local_data, 1);
j3 0:c770ad7363c8 325
j3 0:c770ad7363c8 326 if(!rtn_val)
j3 0:c770ad7363c8 327 {
j3 2:88c168ddc145 328 rtn_val = read(r_adrs,(char*) data, 4);
j3 0:c770ad7363c8 329 }
j3 0:c770ad7363c8 330
j3 0:c770ad7363c8 331 return(rtn_val);
j3 0:c770ad7363c8 332 }