File content as of revision 40:590791ecac1c:

#define PROC_CLOCK_MHZ (__SYSTEM_HFX / 1000000) // Processor clock in MHz
#define OVERHEAD_TUNING 21 // Fraction where OverheadTime(us) = OVERHEAD_TUNING / PROC_CLOCK_MHZ
// Make PROC_CLOCK_MHZ and OVERHEAD_TUNING divisible by PROC_CYCLES_PER_LOOP for best results

#define PIPELINE_REFILL_PROC_CYCLES 1 // ARM specifies 1-3 cycles for pipeline refill following a branch
#define PROC_CYCLES_PER_LOOP (2 + PIPELINE_REFILL_PROC_CYCLES)
#define LOOPS_PER_US (PROC_CLOCK_MHZ / PROC_CYCLES_PER_LOOP) // Number of loop passes for a 1 us delay
#define LOOPS_REMOVED_TUNING (OVERHEAD_TUNING / PROC_CYCLES_PER_LOOP)
 
#if defined TOOLCHAIN_IAR 
  SECTION owlink : CODE
#elif defined TOOLCHAIN_ARM_STD
  AREA owlink, CODE
#else // TOOLCHAIN_GCC_ARM
  .syntax unified
  .section .text
#endif

// void ow_usdelay(unsigned int time_us)
#ifdef TOOLCHAIN_GCC_ARM
.thumb_func
  .global ow_usdelay
ow_usdelay:
#else // TOOLCHAIN_IAR or TOOLCHAIN_ARM_STD
  EXPORT ow_usdelay
ow_usdelay
#endif
  cmp R0, #0 // Return if time_us equals zero
  beq return
  mov R1, #LOOPS_PER_US
  mul R0, R0, R1
  sub R0, R0, #LOOPS_REMOVED_TUNING
#ifdef TOOLCHAIN_GCC_ARM
loop:
#else // TOOLCHAIN_IAR or TOOLCHAIN_ARM_STD
loop
#endif
  subs R0, R0, #1
  bne loop
#ifdef TOOLCHAIN_GCC_ARM
return:
#else // TOOLCHAIN_IAR or TOOLCHAIN_ARM_STD
return
#endif
  bx R14
  
#ifdef TOOLCHAIN_GCC_ARM
  .end
#else // TOOLCHAIN_IAR or TOOLCHAIN_ARM_STD
  END
#endif