Superseded by MaximInterface.

Diff: Bridge/DS28E17/DS28E17.h

Revision:

75:8b627804927c

Parent:

74:23be10c32fa3

Child:

76:84e6c4994e29

--- a/Bridge/DS28E17/DS28E17.h	Fri May 13 07:48:35 2016 -0500
+++ b/Bridge/DS28E17/DS28E17.h	Fri May 13 14:52:50 2016 -0500
@@ -46,22 +46,6 @@
         class DS28E17 : public OneWireSlave
         {
         public:
-
-            enum DS28E17_CMDS
-            {
-                CMD_I2C_WRITE_W_STOP = 0x4B,
-                CMD_I2C_WRITE_NO_STOP = 0x5A,
-                CMD_I2C_WRITE_ONLY = 0x69,
-                CMD_I2C_WRITE_ONLY_W_STOP = 0x78,
-                CMD_I2C_READ_W_STOP = 0x87,
-                CMD_I2C_WRITE_READ_W_STOP = 0x2D,
-                CMD_WRITE_CONFIG_REG = 0xD2,
-                CMD_READ_CONFIG_REG = 0xE1,
-                CMD_DISABLE_OW_MODE = 0x96,
-                CMD_ENABLE_SLEEP_MODE = 0x1E,
-                CMD_READ_DEVICE_REV = 0xC3
-            };
-
             enum CmdResult
             {
                 Success,
@@ -75,8 +59,6 @@
                 OperationFailure
             };
 
-            static const size_t POLL_LIMIT = 10000;
-
             /**********************************************************//**
             * @brief DS28E17 constructor
             *
@@ -363,24 +345,6 @@
 
 
             /**********************************************************//**
-            * @brief Disable 1-Wire Mode DS28E17 and activates the input detection pin.
-            * Immediately after the command, all 1-Wire signaling will be ignored
-            * until the 1W_DET pin is high for more than 3ms.
-            *
-            * @details
-            *
-            * On Entry:
-            *
-            * On Exit:
-            *
-            * @return
-            * true if device selected and written @n
-            * false if failed device select
-            **************************************************************/
-            CmdResult DisableOWMode();
-
-
-            /**********************************************************//**
             * @brief The Enable Sleep Mode command puts the device into a low current mode.
             * All 1-Wire communication is ignored until woken up. Immediately after
             * the command, the device monitors the WAKEUP input pin and
@@ -430,6 +394,7 @@
             uint16_t _crc16;
             uint8_t _i2c_speed;
 
+            static const size_t pollLimit = 10000;
             static const uint16_t _oddparity[16];
 
             uint16_t docrc16(uint16_t data);