Maxim Integrated / OneWire

1-Wire® library for mbed. Complete 1-Wire library that supports our silicon masters along with a bit-bang master on the MAX32600MBED platform with one common interface for mbed. Slave support has also been included and more slaves will be added as time permits.

Dependents:   MAXREFDES131_Qt_Demo MAX32630FTHR_iButton_uSD_Logger MAX32630FTHR_DS18B20_uSD_Logger MAXREFDES130_131_Demo ... more

Superseded by MaximInterface.

Slaves/Bridges/DS28E17/DS28E17.h@107:4697f641eafb, 2016-08-03 (annotated)

Committer:
j3
Date:
Wed Aug 03 22:23:47 2016 +0000
Revision:
107:4697f641eafb
Parent:
105:e6ba25711c05
Child:
108:01aa7b13a5f9
Updated DS28E17 mbr fxs to follow naming convention

Who changed what in which revision?

UserRevisionLine numberNew contents of line
j3 4:ca27db159b10 1 /******************************************************************//**
j3 4:ca27db159b10 2 * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
j3 4:ca27db159b10 3 *
j3 4:ca27db159b10 4 * Permission is hereby granted, free of charge, to any person obtaining a
j3 4:ca27db159b10 5 * copy of this software and associated documentation files (the "Software"),
j3 4:ca27db159b10 6 * to deal in the Software without restriction, including without limitation
j3 4:ca27db159b10 7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
j3 4:ca27db159b10 8 * and/or sell copies of the Software, and to permit persons to whom the
j3 4:ca27db159b10 9 * Software is furnished to do so, subject to the following conditions:
j3 4:ca27db159b10 10 *
j3 4:ca27db159b10 11 * The above copyright notice and this permission notice shall be included
j3 4:ca27db159b10 12 * in all copies or substantial portions of the Software.
j3 4:ca27db159b10 13 *
j3 4:ca27db159b10 14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
j3 4:ca27db159b10 15 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
j3 4:ca27db159b10 16 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
j3 4:ca27db159b10 17 * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
j3 4:ca27db159b10 18 * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
j3 4:ca27db159b10 19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
j3 4:ca27db159b10 20 * OTHER DEALINGS IN THE SOFTWARE.
j3 4:ca27db159b10 21 *
j3 4:ca27db159b10 22 * Except as contained in this notice, the name of Maxim Integrated
j3 4:ca27db159b10 23 * Products, Inc. shall not be used except as stated in the Maxim Integrated
j3 4:ca27db159b10 24 * Products, Inc. Branding Policy.
j3 4:ca27db159b10 25 *
j3 4:ca27db159b10 26 * The mere transfer of this software does not imply any licenses
j3 4:ca27db159b10 27 * of trade secrets, proprietary technology, copyrights, patents,
j3 4:ca27db159b10 28 * trademarks, maskwork rights, or any other form of intellectual
j3 4:ca27db159b10 29 * property whatsoever. Maxim Integrated Products, Inc. retains all
j3 4:ca27db159b10 30 * ownership rights.
j3 4:ca27db159b10 31 **********************************************************************/
j3 4:ca27db159b10 32
IanBenzMaxim 73:2cecc1372acc 33 #ifndef OneWire_Bridge_DS28E17
IanBenzMaxim 73:2cecc1372acc 34 #define OneWire_Bridge_DS28E17
j3 4:ca27db159b10 35
IanBenzMaxim 73:2cecc1372acc 36 #include <stdint.h>
IanBenzMaxim 73:2cecc1372acc 37 #include <stddef.h>
j3 104:3f48daed532b 38 #include "Slaves/OneWireSlave.h"
j3 4:ca27db159b10 39
IanBenzMaxim 73:2cecc1372acc 40 namespace OneWire
j3 4:ca27db159b10 41 {
IanBenzMaxim 76:84e6c4994e29 42 class OneWireMaster;
j3 93:e496a45ce796 43
j3 93:e496a45ce796 44 /**
j3 93:e496a45ce796 45 * @brief DS28E17 1-Wire®-to-I2C Master Bridge
j3 93:e496a45ce796 46 *
j3 93:e496a45ce796 47 * @details The DS28E17 is a 1-Wire slave to I2C master bridge
j3 93:e496a45ce796 48 * device that interfaces directly to I2C slaves at standard
j3 93:e496a45ce796 49 * (100kHz max) or fast (400kHz max). Data transfers serially by
j3 93:e496a45ce796 50 * means of the 1-Wire® protocol, which requires only a single data
j3 93:e496a45ce796 51 * lead and a ground return. Every DS28E17 is guaranteed to have a
j3 93:e496a45ce796 52 * unique 64-bit ROM registration number that serves as a node
j3 93:e496a45ce796 53 * address in the 1-Wire network. Multiple DS28E17 devices can
j3 93:e496a45ce796 54 * coexist with other devices in the 1-Wire network and be accessed
j3 93:e496a45ce796 55 * individually without affecting other devices. The DS28E17 allows
j3 93:e496a45ce796 56 * using complex I2C devices such as display controllers, ADCs, DACs,
j3 93:e496a45ce796 57 * I2C sensors, etc. in a 1-Wire environment. Each self-timed DS28E17
j3 93:e496a45ce796 58 * provides 1-Wire access for a single I2C interface.
j3 93:e496a45ce796 59 *
j3 93:e496a45ce796 60 */
IanBenzMaxim 76:84e6c4994e29 61 class DS28E17 : public OneWireSlave
IanBenzMaxim 73:2cecc1372acc 62 {
IanBenzMaxim 76:84e6c4994e29 63 public:
j3 93:e496a45ce796 64
j3 93:e496a45ce796 65 ///Result of all operations
IanBenzMaxim 76:84e6c4994e29 66 enum CmdResult
IanBenzMaxim 73:2cecc1372acc 67 {
IanBenzMaxim 76:84e6c4994e29 68 Success,
IanBenzMaxim 76:84e6c4994e29 69 CommsReadBitError,
IanBenzMaxim 76:84e6c4994e29 70 CommsWriteBitError,
IanBenzMaxim 76:84e6c4994e29 71 CommsReadByteError,
IanBenzMaxim 76:84e6c4994e29 72 CommsWriteByteError,
IanBenzMaxim 76:84e6c4994e29 73 CommsReadBlockError,
IanBenzMaxim 76:84e6c4994e29 74 CommsWriteBlockError,
IanBenzMaxim 76:84e6c4994e29 75 TimeoutError,
IanBenzMaxim 76:84e6c4994e29 76 OperationFailure
IanBenzMaxim 76:84e6c4994e29 77 };
IanBenzMaxim 74:23be10c32fa3 78
IanBenzMaxim 76:84e6c4994e29 79 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 80 * @brief DS28E17 constructor
IanBenzMaxim 76:84e6c4994e29 81 *
IanBenzMaxim 76:84e6c4994e29 82 *
IanBenzMaxim 76:84e6c4994e29 83 * On Entry:
j3 95:5ebdf5d955f4 84 * @param[in] selector - RandomAccessRomIterator object that
j3 95:5ebdf5d955f4 85 * encapsulates master associated with this device and rom control
j3 95:5ebdf5d955f4 86 * commands
IanBenzMaxim 76:84e6c4994e29 87 **************************************************************/
IanBenzMaxim 77:529edb329ee0 88 DS28E17(RandomAccessRomIterator &selector);
IanBenzMaxim 74:23be10c32fa3 89
IanBenzMaxim 76:84e6c4994e29 90 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 91 * @brief Write to selected DS28E17's I2C with Stop.
IanBenzMaxim 76:84e6c4994e29 92 * Poll until I2C write complete and receive status info.
IanBenzMaxim 76:84e6c4994e29 93 *
IanBenzMaxim 76:84e6c4994e29 94 * @details Output on I2C: S, Address + Write, Write Data [1-255], P
IanBenzMaxim 76:84e6c4994e29 95 *
IanBenzMaxim 76:84e6c4994e29 96 * On Entry:
IanBenzMaxim 76:84e6c4994e29 97 * @param[in] I2C_addr -
IanBenzMaxim 76:84e6c4994e29 98 * Writes I2C address. The least significant bit of the I2C
IanBenzMaxim 76:84e6c4994e29 99 * address is automatically cleared by the command.
IanBenzMaxim 76:84e6c4994e29 100 *
IanBenzMaxim 76:84e6c4994e29 101 * @param[in] length
IanBenzMaxim 76:84e6c4994e29 102 * The number of data bytes to be written ranging from 01h to FFh.
IanBenzMaxim 76:84e6c4994e29 103 * A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 104 *
IanBenzMaxim 76:84e6c4994e29 105 * @param[in] *data
IanBenzMaxim 76:84e6c4994e29 106 * User defines write data ranging from 1-255 bytes.
IanBenzMaxim 76:84e6c4994e29 107 *
IanBenzMaxim 76:84e6c4994e29 108 * On Exit:
IanBenzMaxim 76:84e6c4994e29 109 * @param[out] status
IanBenzMaxim 76:84e6c4994e29 110 * Detects the condition of the Start (bit3), N/A (bit2),
IanBenzMaxim 76:84e6c4994e29 111 * Address(bit1) and CRC16(bit0) bits.
IanBenzMaxim 76:84e6c4994e29 112 * b3;0=No Err|1=I2CStart prev-not issued,
IanBenzMaxim 76:84e6c4994e29 113 * b2;0=No Err|1=I2C N/A Err,
IanBenzMaxim 76:84e6c4994e29 114 * b1;0=No Err|1=Addr Err,
IanBenzMaxim 76:84e6c4994e29 115 * b0;0=Valid CRC16|1=Invalid CRC16
IanBenzMaxim 76:84e6c4994e29 116 *
IanBenzMaxim 76:84e6c4994e29 117 * @param[out] wr_status
IanBenzMaxim 76:84e6c4994e29 118 * Indicates which write byte NACK’d. A value of 00h indicates
IanBenzMaxim 76:84e6c4994e29 119 * all bytes were acknowledged by the slave.
IanBenzMaxim 76:84e6c4994e29 120 * A non-zero value indicates the byte number that NACK’d.
IanBenzMaxim 76:84e6c4994e29 121 *
j3 95:5ebdf5d955f4 122 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 123 **************************************************************/
j3 107:4697f641eafb 124 CmdResult i2cWriteDataWithStop(uint8_t I2C_addr, uint8_t length,
IanBenzMaxim 76:84e6c4994e29 125 uint8_t *data, uint8_t &status,
IanBenzMaxim 76:84e6c4994e29 126 uint8_t &wr_status);
IanBenzMaxim 74:23be10c32fa3 127
IanBenzMaxim 76:84e6c4994e29 128 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 129 * @brief Write to selected DS28E17's I2C No Stop.
IanBenzMaxim 76:84e6c4994e29 130 * Poll until I2C write complete and receive status info.
IanBenzMaxim 76:84e6c4994e29 131 *
IanBenzMaxim 76:84e6c4994e29 132 * @details Output on I2C: S, Address + Write, Write Data [1-255]
IanBenzMaxim 76:84e6c4994e29 133 *
IanBenzMaxim 76:84e6c4994e29 134 * On Entry:
IanBenzMaxim 76:84e6c4994e29 135 * @param[in] I2C_addr
IanBenzMaxim 76:84e6c4994e29 136 * Writes I2C address. The least significant bit of the I2C address
IanBenzMaxim 76:84e6c4994e29 137 * is automatically cleared by the command.
IanBenzMaxim 76:84e6c4994e29 138 *
IanBenzMaxim 76:84e6c4994e29 139 * @param[in] length
IanBenzMaxim 76:84e6c4994e29 140 * The number of data bytes to be written ranging from 01h to FFh.
IanBenzMaxim 76:84e6c4994e29 141 * A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 142 *
IanBenzMaxim 76:84e6c4994e29 143 * @param[in] *data
IanBenzMaxim 76:84e6c4994e29 144 * User defines write data ranging from 1-255 bytes.
IanBenzMaxim 76:84e6c4994e29 145 *
IanBenzMaxim 76:84e6c4994e29 146 * On Exit:
IanBenzMaxim 76:84e6c4994e29 147 * @param[out] status
IanBenzMaxim 76:84e6c4994e29 148 * Detects the condition of the Start (bit3), N/A (bit2),
IanBenzMaxim 76:84e6c4994e29 149 * Address(bit1) and CRC16(bit0) bits.
IanBenzMaxim 76:84e6c4994e29 150 * b3;0=No Err|1=I2CStart prev-not issued,
IanBenzMaxim 76:84e6c4994e29 151 * b2;0=No Err|1=I2C N/A Err,
IanBenzMaxim 76:84e6c4994e29 152 * b1;0=No Err|1=Addr Err,
IanBenzMaxim 76:84e6c4994e29 153 * b0;0=Valid CRC16|1=Invalid CRC16
IanBenzMaxim 76:84e6c4994e29 154 *
IanBenzMaxim 76:84e6c4994e29 155 * @param[out] wr_status
IanBenzMaxim 76:84e6c4994e29 156 * Indicates which write byte NACK’d. A value of 00h indicates
IanBenzMaxim 76:84e6c4994e29 157 * all bytes were acknowledged by the slave.
IanBenzMaxim 76:84e6c4994e29 158 * A non-zero value indicates the byte number that NACK’d.
IanBenzMaxim 76:84e6c4994e29 159 *
j3 95:5ebdf5d955f4 160 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 161 **************************************************************/
j3 107:4697f641eafb 162 CmdResult i2cWriteDataNoStop(uint8_t I2C_addr, uint8_t length,
IanBenzMaxim 76:84e6c4994e29 163 uint8_t *data, uint8_t &status,
IanBenzMaxim 76:84e6c4994e29 164 uint8_t &wr_status);
IanBenzMaxim 74:23be10c32fa3 165
IanBenzMaxim 74:23be10c32fa3 166
IanBenzMaxim 76:84e6c4994e29 167 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 168 * @brief Write to selected DS28E17's I2C with Data only.
IanBenzMaxim 76:84e6c4994e29 169 * Poll until I2C write complete and receive status info.
IanBenzMaxim 76:84e6c4994e29 170 *
IanBenzMaxim 76:84e6c4994e29 171 * @details Output on I2C: Write Data [1-255]
IanBenzMaxim 76:84e6c4994e29 172 *
IanBenzMaxim 76:84e6c4994e29 173 * On Entry:
IanBenzMaxim 76:84e6c4994e29 174 * @param[in] length
IanBenzMaxim 76:84e6c4994e29 175 * The number of data bytes to be written ranging from 01h to FFh.
IanBenzMaxim 76:84e6c4994e29 176 * A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 177 *
IanBenzMaxim 76:84e6c4994e29 178 * @param[in] *data
IanBenzMaxim 76:84e6c4994e29 179 * User defines write data ranging from 1-255 bytes.
IanBenzMaxim 76:84e6c4994e29 180 *
IanBenzMaxim 76:84e6c4994e29 181 * On Exit:
IanBenzMaxim 76:84e6c4994e29 182 * @param[out] status
IanBenzMaxim 76:84e6c4994e29 183 * Detects the condition of the Start (bit3), N/A (bit2),
IanBenzMaxim 76:84e6c4994e29 184 * Address(bit1) and CRC16(bit0) bits.
IanBenzMaxim 76:84e6c4994e29 185 * b3;0=No Err|1=I2CStart prev-not issued,
IanBenzMaxim 76:84e6c4994e29 186 * b2;0=No Err|1=I2C N/A Err,
IanBenzMaxim 76:84e6c4994e29 187 * b1;0=No Err|1=Addr Err,
IanBenzMaxim 76:84e6c4994e29 188 * b0;0=Valid CRC16|1=Invalid CRC16
IanBenzMaxim 76:84e6c4994e29 189 *
IanBenzMaxim 76:84e6c4994e29 190 * @param[out] wr_status
IanBenzMaxim 76:84e6c4994e29 191 * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave.
IanBenzMaxim 76:84e6c4994e29 192 * A non-zero value indicates the byte number that NACK’d.
IanBenzMaxim 76:84e6c4994e29 193 *
j3 95:5ebdf5d955f4 194 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 195 **************************************************************/
j3 107:4697f641eafb 196 CmdResult i2cWriteDataOnly(uint8_t length, uint8_t *data,
IanBenzMaxim 76:84e6c4994e29 197 uint8_t &status, uint8_t &wr_status);
IanBenzMaxim 74:23be10c32fa3 198
IanBenzMaxim 74:23be10c32fa3 199
IanBenzMaxim 76:84e6c4994e29 200 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 201 * @brief Write to selected DS28E17's I2C with Stop.
IanBenzMaxim 76:84e6c4994e29 202 * Poll until I2C write complete and receive status info.
IanBenzMaxim 76:84e6c4994e29 203 *
IanBenzMaxim 76:84e6c4994e29 204 * @details Output on I2C: Write Data [1-255], P
IanBenzMaxim 76:84e6c4994e29 205 *
IanBenzMaxim 76:84e6c4994e29 206 * On Entry:
IanBenzMaxim 76:84e6c4994e29 207 * @param[in] length
IanBenzMaxim 76:84e6c4994e29 208 * The number of data bytes to be written ranging from 01h to FFh.
IanBenzMaxim 76:84e6c4994e29 209 * A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 210 *
IanBenzMaxim 76:84e6c4994e29 211 * @param[in] *data
IanBenzMaxim 76:84e6c4994e29 212 * User defines write data ranging from 1-255 bytes.
IanBenzMaxim 76:84e6c4994e29 213 *
IanBenzMaxim 76:84e6c4994e29 214 * On Exit:
IanBenzMaxim 76:84e6c4994e29 215 * @param[out] status
IanBenzMaxim 76:84e6c4994e29 216 * Detects the condition of the Start (bit3), N/A (bit2),
IanBenzMaxim 76:84e6c4994e29 217 * Address(bit1) and CRC16(bit0) bits.
IanBenzMaxim 76:84e6c4994e29 218 * b3;0=No Err|1=I2CStart prev-not issued,
IanBenzMaxim 76:84e6c4994e29 219 * b2;0=No Err|1=I2C N/A Err,
IanBenzMaxim 76:84e6c4994e29 220 * b1;0=No Err|1=Addr Err,
IanBenzMaxim 76:84e6c4994e29 221 * b0;0=Valid CRC16|1=Invalid CRC16
IanBenzMaxim 76:84e6c4994e29 222 *
IanBenzMaxim 76:84e6c4994e29 223 * @param[out] wr_status
IanBenzMaxim 76:84e6c4994e29 224 * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave.
IanBenzMaxim 76:84e6c4994e29 225 * A non-zero value indicates the byte number that NACK’d.
IanBenzMaxim 76:84e6c4994e29 226 *
j3 95:5ebdf5d955f4 227 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 228 **************************************************************/
j3 107:4697f641eafb 229 CmdResult i2cWriteDataOnlyWithStop(uint8_t length, uint8_t *data,
IanBenzMaxim 76:84e6c4994e29 230 uint8_t &status, uint8_t &wr_status);
IanBenzMaxim 74:23be10c32fa3 231
IanBenzMaxim 74:23be10c32fa3 232
IanBenzMaxim 76:84e6c4994e29 233 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 234 * @brief Write to selected DS28E17's I2C with Stop and poll until I2C write complete
IanBenzMaxim 76:84e6c4994e29 235 * receive status info, and read data with a stop at the end.
IanBenzMaxim 76:84e6c4994e29 236 *
IanBenzMaxim 76:84e6c4994e29 237 * @details Output on I2C:
IanBenzMaxim 76:84e6c4994e29 238 * S, Slave Address + Write, Write Data [1-255],
IanBenzMaxim 76:84e6c4994e29 239 * Sr, Address + Read, Read Data [1-255], P (NACK last read byte)
IanBenzMaxim 76:84e6c4994e29 240 *
IanBenzMaxim 76:84e6c4994e29 241 * On Entry:
IanBenzMaxim 76:84e6c4994e29 242 * @param[in] I2C_addr
IanBenzMaxim 76:84e6c4994e29 243 * Writes I2C address. The least significant bit of the I2C address
IanBenzMaxim 76:84e6c4994e29 244 * is automatically cleared by the command.
IanBenzMaxim 76:84e6c4994e29 245 *
IanBenzMaxim 76:84e6c4994e29 246 * @param[in] length
IanBenzMaxim 76:84e6c4994e29 247 * The number of data bytes to be written ranging from 01h to FFh.
IanBenzMaxim 76:84e6c4994e29 248 * A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 249 *
IanBenzMaxim 76:84e6c4994e29 250 * @param[in] *data
IanBenzMaxim 76:84e6c4994e29 251 * User defines write data ranging from 1-255 bytes.
IanBenzMaxim 76:84e6c4994e29 252 *
IanBenzMaxim 76:84e6c4994e29 253 * @param[in] nu_bytes_read
IanBenzMaxim 76:84e6c4994e29 254 * Number of I2C bytes to read. A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 255 *
IanBenzMaxim 76:84e6c4994e29 256 * On Exit:
IanBenzMaxim 76:84e6c4994e29 257 * @param[out] status
IanBenzMaxim 76:84e6c4994e29 258 * Detects the condition of the Start (bit3), N/A (bit2),
IanBenzMaxim 76:84e6c4994e29 259 * Address(bit1) and CRC16(bit0) bits.
IanBenzMaxim 76:84e6c4994e29 260 * b3;0=No Err|1=I2CStart prev-not issued,
IanBenzMaxim 76:84e6c4994e29 261 * b2;0=No Err|1=I2C N/A Err,
IanBenzMaxim 76:84e6c4994e29 262 * b1;0=No Err|1=Addr Err,
IanBenzMaxim 76:84e6c4994e29 263 * b0;0=Valid CRC16|1=Invalid CRC16
IanBenzMaxim 76:84e6c4994e29 264 *
IanBenzMaxim 76:84e6c4994e29 265 * @param[out] wr_status
IanBenzMaxim 76:84e6c4994e29 266 * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave.
IanBenzMaxim 76:84e6c4994e29 267 * A non-zero value indicates the byte number that NACK’d.
IanBenzMaxim 76:84e6c4994e29 268 *
IanBenzMaxim 76:84e6c4994e29 269 * @param[out] *read_data
IanBenzMaxim 76:84e6c4994e29 270 * Array of read data received from I2C.
IanBenzMaxim 76:84e6c4994e29 271 *
j3 95:5ebdf5d955f4 272 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 273 **************************************************************/
j3 107:4697f641eafb 274 CmdResult i2cWriteReadDataWithStop(uint8_t I2C_addr, uint8_t length,
IanBenzMaxim 76:84e6c4994e29 275 uint8_t *data, uint8_t nu_bytes_read,
IanBenzMaxim 76:84e6c4994e29 276 uint8_t &status, uint8_t &wr_status,
IanBenzMaxim 76:84e6c4994e29 277 uint8_t *read_data);
IanBenzMaxim 74:23be10c32fa3 278
IanBenzMaxim 74:23be10c32fa3 279
IanBenzMaxim 76:84e6c4994e29 280 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 281 * @brief Selected DS28E17's and send I2C address and poll until
IanBenzMaxim 76:84e6c4994e29 282 * I2C read address complete, receive status info, and read data
IanBenzMaxim 76:84e6c4994e29 283 * with a stop at the end.
IanBenzMaxim 76:84e6c4994e29 284 *
IanBenzMaxim 76:84e6c4994e29 285 * @details Output on I2C:
IanBenzMaxim 76:84e6c4994e29 286 * S, Slave Address + Read, Read Data [1-255], P (NACK last read byte)
IanBenzMaxim 76:84e6c4994e29 287 *
IanBenzMaxim 76:84e6c4994e29 288 * On Entry:
IanBenzMaxim 76:84e6c4994e29 289 * @param[in] I2C_addr
IanBenzMaxim 76:84e6c4994e29 290 * Writes I2C address. The least significant bit of the I2C address
IanBenzMaxim 76:84e6c4994e29 291 * is automatically cleared by the command.
IanBenzMaxim 76:84e6c4994e29 292 *
IanBenzMaxim 76:84e6c4994e29 293 * On Exit:
IanBenzMaxim 76:84e6c4994e29 294 * @param[out] nu_bytes_read
IanBenzMaxim 76:84e6c4994e29 295 * Number of I2C bytes to read. A value of zero will assert the Error Detected pin (ED).
IanBenzMaxim 76:84e6c4994e29 296 *
IanBenzMaxim 76:84e6c4994e29 297 * @param[out] status
IanBenzMaxim 76:84e6c4994e29 298 * Detects the condition of the Start (bit3), N/A (bit2),
IanBenzMaxim 76:84e6c4994e29 299 * Address(bit1) and CRC16(bit0) bits.
IanBenzMaxim 76:84e6c4994e29 300 * b3;0=No Err|1=I2CStart prev-not issued,
IanBenzMaxim 76:84e6c4994e29 301 * b2;0=No Err|1=I2C N/A Err,
IanBenzMaxim 76:84e6c4994e29 302 * b1;0=No Err|1=Addr Err,
IanBenzMaxim 76:84e6c4994e29 303 * b0;0=Valid CRC16|1=Invalid CRC16
IanBenzMaxim 76:84e6c4994e29 304 *
IanBenzMaxim 76:84e6c4994e29 305 * @param[out] *read_data
IanBenzMaxim 76:84e6c4994e29 306 * Array of read data received from I2C.
IanBenzMaxim 76:84e6c4994e29 307 *
j3 95:5ebdf5d955f4 308 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 309 **************************************************************/
j3 107:4697f641eafb 310 CmdResult i2cReadDataWithStop(uint8_t I2C_addr, uint8_t nu_bytes_read,
IanBenzMaxim 76:84e6c4994e29 311 uint8_t &status, uint8_t *read_data);
IanBenzMaxim 74:23be10c32fa3 312
IanBenzMaxim 74:23be10c32fa3 313
IanBenzMaxim 76:84e6c4994e29 314 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 315 * @brief Write to Configuration Register of DS28E17.
IanBenzMaxim 76:84e6c4994e29 316 *
IanBenzMaxim 76:84e6c4994e29 317 * @details
IanBenzMaxim 76:84e6c4994e29 318 *
IanBenzMaxim 76:84e6c4994e29 319 * On Entry:
IanBenzMaxim 76:84e6c4994e29 320 * @param[in] data
IanBenzMaxim 76:84e6c4994e29 321 * sent to configuration register
IanBenzMaxim 76:84e6c4994e29 322 *
j3 95:5ebdf5d955f4 323 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 324 **************************************************************/
j3 107:4697f641eafb 325 CmdResult writeConfigReg(uint8_t data);
IanBenzMaxim 74:23be10c32fa3 326
IanBenzMaxim 74:23be10c32fa3 327
IanBenzMaxim 76:84e6c4994e29 328 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 329 * @brief Read the Configuration Register of DS28E17.
IanBenzMaxim 76:84e6c4994e29 330 *
IanBenzMaxim 76:84e6c4994e29 331 * @details
IanBenzMaxim 76:84e6c4994e29 332 *
IanBenzMaxim 76:84e6c4994e29 333 * On Exit:
j3 95:5ebdf5d955f4 334 * @param[out] config - contents of configuration register
IanBenzMaxim 76:84e6c4994e29 335 *
j3 95:5ebdf5d955f4 336 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 337 **************************************************************/
j3 107:4697f641eafb 338 CmdResult readConfigReg(uint8_t & config);
IanBenzMaxim 74:23be10c32fa3 339
IanBenzMaxim 74:23be10c32fa3 340
IanBenzMaxim 76:84e6c4994e29 341 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 342 * @brief The Enable Sleep Mode command puts the device into a low current mode.
IanBenzMaxim 76:84e6c4994e29 343 * All 1-Wire communication is ignored until woken up. Immediately after
IanBenzMaxim 76:84e6c4994e29 344 * the command, the device monitors the WAKEUP input pin and
IanBenzMaxim 76:84e6c4994e29 345 * exits sleep mode on a rising edge.
IanBenzMaxim 76:84e6c4994e29 346 *
j3 95:5ebdf5d955f4 347 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 348 **************************************************************/
j3 107:4697f641eafb 349 CmdResult enableSleepMode();
IanBenzMaxim 74:23be10c32fa3 350
IanBenzMaxim 74:23be10c32fa3 351
IanBenzMaxim 76:84e6c4994e29 352 /**********************************************************//**
IanBenzMaxim 76:84e6c4994e29 353 * @brief Read the Device Revision of DS28E17. The revision value
IanBenzMaxim 76:84e6c4994e29 354 * should never be zero. The upper nibble is the major revision
IanBenzMaxim 76:84e6c4994e29 355 * and the lower nibble is the minor revision.
IanBenzMaxim 76:84e6c4994e29 356 *
j3 95:5ebdf5d955f4 357 * On Exit:
j3 95:5ebdf5d955f4 358 * @param[out] rev - device revision
IanBenzMaxim 76:84e6c4994e29 359 *
j3 95:5ebdf5d955f4 360 * @return CmdResult - result of operation
IanBenzMaxim 76:84e6c4994e29 361 **************************************************************/
j3 107:4697f641eafb 362 CmdResult readDeviceRevision(uint8_t & rev);
IanBenzMaxim 74:23be10c32fa3 363
IanBenzMaxim 76:84e6c4994e29 364 private:
IanBenzMaxim 78:0cbbac7f2016 365 static const size_t pollLimit = 10000;
IanBenzMaxim 74:23be10c32fa3 366
j3 107:4697f641eafb 367 CmdResult sendPacket(const uint8_t * data, uint8_t data_length,
IanBenzMaxim 76:84e6c4994e29 368 uint8_t & status, uint8_t & wr_status);
IanBenzMaxim 74:23be10c32fa3 369
IanBenzMaxim 76:84e6c4994e29 370 //overloaded function for I2C read only command
j3 107:4697f641eafb 371 CmdResult sendPacket(const uint8_t * data, uint8_t data_length,
IanBenzMaxim 76:84e6c4994e29 372 uint8_t & status);
IanBenzMaxim 76:84e6c4994e29 373 };
IanBenzMaxim 73:2cecc1372acc 374 }
j3 4:ca27db159b10 375
IanBenzMaxim 74:23be10c32fa3 376 #endif
j3 17:b646b1e3970b 377