Diff: xternal/simplelink/user.h

Revision:

16:a004191a79ab

Parent:

0:33d4e66780c0

Child:

17:5926077e5345

diff -r 75404fab3615 -r a004191a79ab xternal/simplelink/user.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/xternal/simplelink/user.h	Thu Oct 03 11:40:13 2019 -0500
@@ -0,0 +1,1037 @@
+/*
+ * user.h - CC31xx/CC32xx Host Driver Implementation
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 
+ * 
+ * 
+ *  Redistribution and use in source and binary forms, with or without 
+ *  modification, are permitted provided that the following conditions 
+ *  are met:
+ *
+ *    Redistributions of source code must retain the above copyright 
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ *    Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the 
+ *    documentation and/or other materials provided with the   
+ *    distribution.
+ *
+ *    Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*/
+    
+
+#ifndef __USER_H__
+#define __USER_H__
+
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+/*!
+
+    \addtogroup Porting
+    @{
+
+*/
+
+/*!
+ ******************************************************************************
+
+    \defgroup       porting_user_include        User Include Files
+ 
+    This section IS NOT REQUIRED in case user provided primitives are handled 
+    in makefiles or project configurations (IDE) 
+
+    PORTING ACTION: 
+        - Include all required header files for the definition of:
+            -# Transport layer library API (e.g. SPI, UART)
+            -# OS primitives definitions (e.g. Task spawn, Semaphores)
+            -# Memory management primitives (e.g. alloc, free)
+
+	in order to "install" external SimpleLink library one should follow the next steps:
+	1. Include the external library API header file (i.e. #include "IOT.h")
+	2. Define each one of the desired external lib with one (out of 5) of the following:
+      #define SL_EXT_LIB_1 <Your external lib name>
+      #define SL_EXT_LIB_2 <Your external lib name>
+      #define SL_EXT_LIB_3 <Your external lib name>
+      #define SL_EXT_LIB_4 <Your external lib name>
+      #define SL_EXT_LIB_5 <Your external lib name>
+
+ ******************************************************************************
+ */
+ #include <string.h>
+ #include <CC3100_transport.h>
+
+/*!
+ ******************************************************************************
+
+    \defgroup       porting_capabilities        Capability Set Definition
+
+    This section IS NOT REQUIRED in case one of the following pre defined 
+    capabilities set is in use:
+    - SL_TINY
+    - SL_SMALL
+    - SL_FULL
+
+    PORTING ACTION: 
+        - Define one of the pre-defined capabilities set or uncomment the
+          relevant definitions below to select the required capabilities
+    @{
+ *******************************************************************************
+ */
+
+/*!
+	\def		MAX_CONCURRENT_ACTIONS
+
+    \brief      Defines the maximum number of concurrent action in the system
+				Min:1 , Max: 32
+                    
+                Actions which has async events as return, can be 
+
+    \sa             
+
+    \note       In case there are not enough resources for the actions needed in the system,
+	        	error is received: POOL_IS_EMPTY
+			    one option is to increase MAX_CONCURRENT_ACTIONS 
+				(improves performance but results in memory consumption)
+		     	Other option is to call the API later (decrease performance)
+
+    \warning    In case of setting to one, recommend to use non-blocking recv\recvfrom to allow
+				multiple socket recv
+*/
+
+#ifndef SL_TINY_EXT
+#define MAX_CONCURRENT_ACTIONS 10
+#else
+#define MAX_CONCURRENT_ACTIONS 1
+#endif
+/*!
+	\def		CPU_FREQ_IN_MHZ
+    \brief      Defines CPU frequency for Host side, for better accuracy of busy loops, if any
+    \sa             
+    \note       
+
+    \warning    If not set the default CPU frequency is set to 200MHz
+                This option will be deprecated in future release
+*/ 
+#define CPU_FREQ_IN_MHZ        25
+
+
+/*!
+	\def		SL_INC_ARG_CHECK
+
+    \brief      Defines whether the SimpleLink driver perform argument check 
+                or not
+                    
+                When defined, the SimpleLink driver perform argument check on 
+                function call. Removing this define could reduce some code 
+                size and improve slightly the performances but may impact in 
+                unpredictable behaviour in case of invalid arguments
+
+    \sa             
+
+    \note       belongs to \ref porting_sec
+
+    \warning    Removing argument check may cause unpredictable behaviour in 
+                case of invalid arguments. 
+                In this case the user is responsible to argument validity 
+                (for example all handlers must not be NULL)
+*/
+#define SL_INC_ARG_CHECK
+
+
+/*!
+    \def		SL_INC_STD_BSD_API_NAMING
+
+    \brief      Defines whether SimpleLink driver should expose standard BSD 
+                APIs or not
+    
+                When defined, the SimpleLink driver in addition to its alternative
+                BSD APIs expose also standard BSD APIs.
+                Standard BSD API includes the following functions:
+                socket , close , accept , bind , listen	, connect , select , 
+                setsockopt	, getsockopt , recv , recvfrom , write , send , sendto , 
+                gethostbyname
+
+    \sa         
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_STD_BSD_API_NAMING
+
+
+/*!
+    \brief      Defines whether to include extended API in SimpleLink driver
+                or not
+    
+                When defined, the SimpleLink driver will include also all 
+                extended API of the included packages
+
+    \sa         ext_api
+
+    \note       belongs to \ref porting_sec
+
+    \warning    
+*/
+#define SL_INC_EXT_API
+
+/*!
+    \brief      Defines whether to include WLAN package in SimpleLink driver 
+                or not
+    
+                When defined, the SimpleLink driver will include also 
+                the WLAN package
+
+    \sa         
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_WLAN_PKG
+
+/*!
+    \brief      Defines whether to include SOCKET package in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also 
+                the SOCKET package
+
+    \sa         
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_SOCKET_PKG
+
+/*!
+    \brief      Defines whether to include NET_APP package in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also the 
+                NET_APP package
+
+    \sa         
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_NET_APP_PKG
+
+/*!
+    \brief      Defines whether to include NET_CFG package in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also 
+                the NET_CFG package
+
+    \sa         
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_NET_CFG_PKG
+
+/*!
+    \brief      Defines whether to include NVMEM package in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also the 
+                NVMEM package
+
+    \sa         
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/ 
+#define SL_INC_NVMEM_PKG
+
+/*!
+    \brief      Defines whether to include socket server side APIs 
+                in SimpleLink driver or not
+    
+                When defined, the SimpleLink driver will include also socket 
+                server side APIs
+
+    \sa         server_side
+
+    \note       
+
+    \warning        
+*/
+#define SL_INC_SOCK_SERVER_SIDE_API
+
+/*!
+    \brief      Defines whether to include socket client side APIs in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also socket 
+                client side APIs
+
+    \sa         client_side
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_SOCK_CLIENT_SIDE_API
+
+/*!
+    \brief      Defines whether to include socket receive APIs in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also socket 
+                receive side APIs
+
+    \sa         recv_api
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_SOCK_RECV_API
+
+/*!
+    \brief      Defines whether to include socket send APIs in SimpleLink 
+                driver or not
+    
+                When defined, the SimpleLink driver will include also socket 
+                send side APIs
+
+    \sa         send_api
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define SL_INC_SOCK_SEND_API
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+
+/*!
+ ******************************************************************************
+
+    \defgroup   porting_enable_device       Device Enable/Disable IO
+
+    The enable/disable API provide mechanism to enable/disable the network processor
+
+
+    PORTING ACTION:
+        - None
+    @{
+
+ ******************************************************************************
+ */
+/*!
+    \brief		Preamble to the enabling the Network Processor.
+                        Placeholder to implement any pre-process operations
+                        before enabling networking operations.
+
+    \sa			sl_DeviceEnable
+
+    \note       belongs to \ref ported_sec
+
+*/
+#define sl_DeviceEnablePreamble()		
+
+/*!
+    \brief		Enable the Network Processor
+
+    \sa			sl_DeviceDisable
+
+    \note       belongs to \ref porting_sec
+
+*/
+#define sl_DeviceEnable sl_DeviceEnable
+
+/*!
+    \brief		Disable the Network Processor
+
+    \sa			sl_DeviceEnable
+
+    \note       belongs to \ref porting_sec
+*/
+#define sl_DeviceDisable sl_DeviceDisable
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+/*!
+ ******************************************************************************
+
+    \defgroup   porting_interface         Hardware Transport Interface
+
+    The simple link device can work with different transport interfaces
+    (namely,SPI or UART). Texas Instruments provides single driver
+    that can work with all these types. This section binds the
+    physical transport interface with the SimpleLink driver
+
+
+    \note       Correct and efficient implementation of this driver is critical
+                for the performances of the SimpleLink device on this platform.
+
+
+    PORTING ACTION:
+        - None
+
+    @{
+
+ ******************************************************************************
+ */
+
+#define _SlFd_t		SlFd_t
+
+/*!
+    \brief      Opens an interface communication port to be used for communicating
+                with a SimpleLink device
+	
+	            Given an interface name and option flags, this function opens 
+                the communication port and creates a file descriptor. 
+                This file descriptor is used afterwards to read and write 
+                data from and to this specific communication channel.
+	            The speed, clock polarity, clock phase, chip select and all other 
+                specific attributes of the channel are all should be set to hardcoded
+                in this function.
+	
+	\param	 	ifName  -   points to the interface name/path. The interface name is an 
+                            optional attributes that the simple link driver receives
+                            on opening the driver (sl_Start). 
+                            In systems that the spi channel is not implemented as 
+                            part of the OS device drivers, this parameter could be NULL.
+
+	\param      flags   -   optional flags parameters for future use
+
+	\return     upon successful completion, the function shall open the channel 
+                and return a non-negative integer representing the file descriptor.
+                Otherwise, -1 shall be returned 
+					
+    \sa         sl_IfClose , sl_IfRead , sl_IfWrite
+
+	\note       The prototype of the function is as follow:
+                    Fd_t xxx_IfOpen(char* pIfName , unsigned long flags);
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_IfOpen sl_IfOpen
+
+/*!
+    \brief      Closes an opened interface communication port
+	
+	\param	 	fd  -   file descriptor of opened communication channel
+
+	\return		upon successful completion, the function shall return 0. 
+			    Otherwise, -1 shall be returned 
+					
+    \sa         sl_IfOpen , sl_IfRead , sl_IfWrite
+
+	\note       The prototype of the function is as follow:
+                    int xxx_IfClose(Fd_t Fd);
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_IfClose sl_IfClose
+
+/*!
+    \brief      Attempts to read up to len bytes from an opened communication channel 
+                into a buffer starting at pBuff.
+	
+	\param	 	fd      -   file descriptor of an opened communication channel
+	
+	\param		pBuff   -   pointer to the first location of a buffer that contains enough 
+                            space for all expected data
+
+	\param      len     -   number of bytes to read from the communication channel
+
+	\return     upon successful completion, the function shall return the number of read bytes. 
+                Otherwise, 0 shall be returned 
+					
+    \sa         sl_IfClose , sl_IfOpen , sl_IfWrite
+
+
+	\note       The prototype of the function is as follow:
+                    int xxx_IfRead(Fd_t Fd , char* pBuff , int Len);
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_IfRead sl_IfRead
+
+/*!
+    \brief attempts to write up to len bytes to the SPI channel
+	
+	\param	 	fd      -   file descriptor of an opened communication channel
+	
+	\param		pBuff   -   pointer to the first location of a buffer that contains 
+                            the data to send over the communication channel
+
+	\param      len     -   number of bytes to write to the communication channel
+
+	\return     upon successful completion, the function shall return the number of sent bytes. 
+				otherwise, 0 shall be returned 
+					
+    \sa         sl_IfClose , sl_IfOpen , sl_IfRead
+
+	\note       This function could be implemented as zero copy and return only upon successful completion
+                of writing the whole buffer, but in cases that memory allocation is not too tight, the 
+                function could copy the data to internal buffer, return back and complete the write in 
+                parallel to other activities as long as the other SPI activities would be blocked until 
+                the entire buffer write would be completed 
+
+               The prototype of the function is as follow:
+                    int xxx_IfWrite(Fd_t Fd , char* pBuff , int Len);
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_IfWrite sl_IfWrite
+
+/*!
+    \brief 		register an interrupt handler routine for the host IRQ
+
+	\param	 	InterruptHdl	-	pointer to interrupt handler routine
+
+	\param 		pValue			-	pointer to a memory structure that is passed
+									to the interrupt handler.
+
+	\return		upon successful registration, the function shall return 0.
+				Otherwise, -1 shall be returned
+
+    \sa
+
+	\note		If there is already registered interrupt handler, the function
+				should overwrite the old handler with the new one
+
+	\note       If the handler is a null pointer, the function should un-register the
+	            interrupt handler, and the interrupts can be disabled.
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_IfRegIntHdlr(InterruptHdl , pValue) sl_IfRegIntHdlr(InterruptHdl , pValue)
+
+/*!
+    \brief 		Masks the Host IRQ
+
+    \sa		sl_IfUnMaskIntHdlr
+
+
+
+    \note       belongs to \ref porting_sec
+
+    \warning
+*/
+#define sl_IfMaskIntHdlr()								
+
+/*!
+    \brief 		Unmasks the Host IRQ
+
+    \sa		sl_IfMaskIntHdlr
+
+
+
+    \note       belongs to \ref porting_sec
+
+    \warning
+*/
+#define sl_IfUnMaskIntHdlr()
+    
+/*!
+    \brief 		Write Handers for statistics debug on write 
+
+	\param	 	interface handler	-	pointer to interrupt handler routine
+
+
+	\return		no return value
+
+    \sa
+
+	\note		An optional hooks for monitoring before and after write info
+
+    \note       belongs to \ref porting_sec
+
+    \warning        
+*/
+/*
+#define SL_START_WRITE_STAT
+*/
+
+#ifdef SL_START_WRITE_STAT
+#define sl_IfStartWriteSequence                      
+#define sl_IfEndWriteSequence                        
+#endif
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+/*!
+ ******************************************************************************
+
+    \defgroup   porting_mem_mgm             Memory Management
+
+    This section declare in which memory management model the SimpleLink driver
+    will run:
+        -# Static
+        -# Dynamic
+
+    This section IS NOT REQUIRED in case Static model is selected.
+
+    The default memory model is Static
+
+    PORTING ACTION:
+        - If dynamic model is selected, define the alloc and free functions.
+
+    @{
+
+ *****************************************************************************
+ */
+
+/*!
+    \brief      Defines whether the SimpleLink driver is working in dynamic
+                memory model or not
+
+                When defined, the SimpleLink driver use dynamic allocations
+                if dynamic allocation is selected malloc and free functions
+                must be retrieved
+
+    \sa
+
+    \note       belongs to \ref porting_sec
+
+    \warning
+*/
+/*
+#define SL_MEMORY_MGMT_DYNAMIC
+*/
+
+#ifdef SL_MEMORY_MGMT_DYNAMIC
+
+/*!
+    \brief
+
+    \sa
+
+    \note           belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_Malloc(Size)                                 malloc(Size)
+
+/*!
+    \brief
+
+    \sa
+
+    \note           belongs to \ref porting_sec
+
+    \warning        
+*/
+#define sl_Free(pMem)                                   free(pMem)
+
+#endif
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+/*!
+ ******************************************************************************
+
+    \defgroup   porting_os          Operating System (OS)
+
+    The simple link driver can run on multi-threaded environment as well
+    as non-os environment (main loop)
+
+    This section IS NOT REQUIRED in case you are working on non-os environment.
+
+    If you choose to work in multi-threaded environment under any operating system
+    you will have to provide some basic adaptation routines to allow the driver
+    to protect access to resources from different threads (locking object) and
+    to allow synchronization between threads (sync objects).
+
+    PORTING ACTION:
+        -# Uncomment SL_PLATFORM_MULTI_THREADED define
+        -# Bind locking object routines
+        -# Bind synchronization object routines
+        -# Optional - Bind spawn thread routine
+
+    @{
+
+ ******************************************************************************
+ */
+/*
+#define SL_PLATFORM_MULTI_THREADED
+*/
+
+#ifdef SL_PLATFORM_MULTI_THREADED
+
+/*!
+    \brief
+    \sa
+    \note           belongs to \ref porting_sec
+    \warning
+*/
+#define SL_OS_RET_CODE_OK                       ((int)OSI_OK)
+
+/*!
+    \brief
+    \sa
+    \note           belongs to \ref porting_sec
+    \warning
+*/
+#define SL_OS_WAIT_FOREVER                      ((OsiTime_t)OSI_WAIT_FOREVER)
+
+/*!
+    \brief
+    \sa
+    \note           belongs to \ref porting_sec
+    \warning
+*/
+#define SL_OS_NO_WAIT	                        ((OsiTime_t)OSI_NO_WAIT)
+
+/*!
+	\brief type definition for a time value
+
+	\note	On each porting or platform the type could be whatever is needed - integer, pointer to structure etc.
+
+    \note       belongs to \ref porting_sec
+*/
+#define _SlTime_t				
+
+/*!
+	\brief 	type definition for a sync object container
+
+	Sync object is object used to synchronize between two threads or thread and interrupt handler.
+	One thread is waiting on the object and the other thread send a signal, which then
+	release the waiting thread.
+	The signal must be able to be sent from interrupt context.
+	This object is generally implemented by binary semaphore or events.
+
+	\note	On each porting or platform the type could be whatever is needed - integer, structure etc.
+
+    \note       belongs to \ref porting_sec
+*/
+#define _SlSyncObj_t			
+
+/*!
+	\brief 	This function creates a sync object
+
+	The sync object is used for synchronization between different thread or ISR and
+	a thread.
+
+	\param	pSyncObj	-	pointer to the sync object control block
+
+	\return upon successful creation the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_SyncObjCreate(pSyncObj,pName)           
+
+/*!
+	\brief 	This function deletes a sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+
+	\return upon successful deletion the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_SyncObjDelete(pSyncObj)                  
+
+/*!
+	\brief 		This function generates a sync signal for the object.
+
+	All suspended threads waiting on this sync object are resumed
+
+	\param		pSyncObj	-	pointer to the sync object control block
+
+	\return 	upon successful signalling the function should return 0
+				Otherwise, a negative value indicating the error code shall be returned
+	\note		the function could be called from ISR context
+	\warning
+*/
+#define sl_SyncObjSignal(pSyncObj)                
+
+/*!
+	\brief 		This function generates a sync signal for the object from Interrupt
+
+	This is for RTOS that should signal from IRQ using a dedicated API
+
+	\param		pSyncObj	-	pointer to the sync object control block
+
+	\return 	upon successful signalling the function should return 0
+				Otherwise, a negative value indicating the error code shall be returned
+	\note		the function could be called from ISR context
+	\warning
+*/
+#define sl_SyncObjSignalFromIRQ(pSyncObj)           
+/*!
+	\brief 	This function waits for a sync signal of the specific sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+	\param	Timeout		-	numeric value specifies the maximum number of mSec to
+							stay suspended while waiting for the sync signal
+							Currently, the simple link driver uses only two values:
+								- OSI_WAIT_FOREVER
+								- OSI_NO_WAIT
+
+	\return upon successful reception of the signal within the timeout window return 0
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_SyncObjWait(pSyncObj,Timeout)             
+    
+/*!
+	\brief 	type definition for a locking object container
+
+	Locking object are used to protect a resource from mutual accesses of two or more threads.
+	The locking object should support reentrant locks by a signal thread.
+	This object is generally implemented by mutex semaphore
+
+	\note	On each porting or platform the type could be whatever is needed - integer, structure etc.
+    \note       belongs to \ref porting_sec
+*/
+#define _SlLockObj_t 			
+
+/*!
+	\brief 	This function creates a locking object.
+
+	The locking object is used for protecting a shared resources between different
+	threads.
+
+	\param	pLockObj	-	pointer to the locking object control block
+
+	\return upon successful creation the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_LockObjCreate(pLockObj,pName)            
+    
+/*!
+	\brief 	This function deletes a locking object.
+
+	\param	pLockObj	-	pointer to the locking object control block
+
+	\return upon successful deletion the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_LockObjDelete(pLockObj)                 
+    
+/*!
+	\brief 	This function locks a locking object.
+
+	All other threads that call this function before this thread calls
+	the osi_LockObjUnlock would be suspended
+
+	\param	pLockObj	-	pointer to the locking object control block
+	\param	Timeout		-	numeric value specifies the maximum number of mSec to
+							stay suspended while waiting for the locking object
+							Currently, the simple link driver uses only two values:
+								- OSI_WAIT_FOREVER
+								- OSI_NO_WAIT
+
+
+	\return upon successful reception of the locking object the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_LockObjLock(pLockObj,Timeout)            
+    
+/*!
+	\brief 	This function unlock a locking object.
+
+	\param	pLockObj	-	pointer to the locking object control block
+
+	\return upon successful unlocking the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+#define sl_LockObjUnlock(pLockObj)                 
+
+#endif
+/*!
+	\brief 	This function call the pEntry callback from a different context
+
+	\param	pEntry		-	pointer to the entry callback function
+
+	\param	pValue		- 	pointer to any type of memory structure that would be
+							passed to pEntry callback from the execution thread.
+
+	\param	flags		- 	execution flags - reserved for future usage
+
+	\return upon successful registration of the spawn the function should return 0
+			(the function is not blocked till the end of the execution of the function
+			and could be returned before the execution is actually completed)
+			Otherwise, a negative value indicating the error code shall be returned
+    \note       belongs to \ref porting_sec
+	\warning
+*/
+/*
+#define SL_PLATFORM_EXTERNAL_SPAWN
+*/
+
+#ifdef SL_PLATFORM_EXTERNAL_SPAWN
+#define sl_Spawn(pEntry,pValue,flags)               
+#endif
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+
+/*!
+ ******************************************************************************
+
+    \defgroup       porting_events      Event Handlers
+
+    This section includes the asynchronous event handlers routines
+
+    PORTING ACTION:
+        -Uncomment the required handler and define your routine as the value
+        of this handler
+
+    @{
+
+ ******************************************************************************
+ */
+
+/*!
+    \brief
+
+    \sa
+
+    \note       belongs to \ref porting_sec
+
+    \warning
+*/
+#define sl_GeneralEvtHdlr SimpleLinkGeneralEventHandler
+
+
+/*!
+    \brief          An event handler for WLAN connection or disconnection indication
+                    This event handles async WLAN events. 
+                    Possible events are:
+                    SL_WLAN_CONNECT_EVENT - indicates WLAN is connected 
+                    SL_WLAN_DISCONNECT_EVENT - indicates WLAN is disconnected
+    \sa
+
+    \note           belongs to \ref porting_sec
+
+    \warning
+*/
+#define sl_WlanEvtHdlr SimpleLinkWlanEventHandler
+
+/*!
+    \brief          An event handler for IP address asynchronous event. Usually accepted after new WLAN connection.
+                    This event handles networking events.
+                    Possible events are:
+                    SL_NETAPP_IPV4_ACQUIRED - IP address was acquired (DHCP or Static)
+
+    \sa
+
+    \note           belongs to \ref porting_sec
+
+    \warning
+*/
+#define sl_NetAppEvtHdlr SimpleLinkNetAppEventHandler
+
+/*!
+    \brief          A callback for HTTP server events.
+                    Possible events are:
+                    SL_NETAPP_HTTPGETTOKENVALUE - NWP requests to get the value of a specific token
+					SL_NETAPP_HTTPPOSTTOKENVALUE - NWP post to the host a new value for a specific token
+
+	\param			pServerEvent - Contains the relevant event information (SL_NETAPP_HTTPGETTOKENVALUE or SL_NETAPP_HTTPPOSTTOKENVALUE)
+
+	\param			pServerResponse - Should be filled by the user with the relevant response information (i.e SL_NETAPP_HTTPSETTOKENVALUE as a response to SL_NETAPP_HTTPGETTOKENVALUE event)
+
+    \sa
+
+    \note           belongs to \ref porting_sec
+
+    \warning
+*/
+//#define sl_HttpServerCallback SimpleLinkHttpServerCallback
+
+/*!
+    \brief
+
+    \sa
+
+    \note           belongs to \ref porting_sec
+
+    \warning
+*/
+#define sl_SockEvtHdlr SimpleLinkSockEventHandler
+
+
+
+/*!
+
+ Close the Doxygen group.
+ @}
+
+ */
+
+
+#ifdef  __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __USER_H__ */
+