Diff: xternal/simplelink/source/nonos.h

Revision:

16:a004191a79ab

Parent:

0:33d4e66780c0

diff -r 75404fab3615 -r a004191a79ab xternal/simplelink/source/nonos.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/xternal/simplelink/source/nonos.h	Thu Oct 03 11:40:13 2019 -0500
@@ -0,0 +1,344 @@
+/*
+ * nonos.h - CC31xx/CC32xx Host Driver Implementation
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ 
+ * 
+ * 
+ *  Redistribution and use in source and binary forms, with or without 
+ *  modification, are permitted provided that the following conditions 
+ *  are met:
+ *
+ *    Redistributions of source code must retain the above copyright 
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ *    Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the 
+ *    documentation and/or other materials provided with the   
+ *    distribution.
+ *
+ *    Neither the name of Texas Instruments Incorporated nor the names of
+ *    its contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+*/
+
+#ifndef __NONOS_H__
+#define	__NONOS_H__
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+
+#ifndef SL_PLATFORM_MULTI_THREADED
+
+/* This function call the user defined function, if defined, from the sync wait loop  */
+/* The use case of this function is to allow nonos system to call a user function to put the device into sleep */
+/* The wake up should be activated after getting an interrupt from the device to Host */
+/* The user function must return without blocking to prevent a delay on the event handling */
+/*
+#define _SlSyncWaitLoopCallback  UserSleepFunction
+*/
+
+#ifndef SL_TINY_EXT
+#define NONOS_MAX_SPAWN_ENTRIES     5
+#else
+#define NONOS_MAX_SPAWN_ENTRIES     1
+#endif
+
+
+
+typedef struct
+{
+    _SlSpawnEntryFunc_t 		pEntry;
+    void* 						pValue;
+	_u8                         IsAllocated;
+}_SlNonOsSpawnEntry_t;
+
+typedef struct
+{
+    _SlNonOsSpawnEntry_t	SpawnEntries[NONOS_MAX_SPAWN_ENTRIES];
+}_SlNonOsCB_t;
+
+
+#define NONOS_WAIT_FOREVER   							0xFF
+#define NONOS_NO_WAIT        							0x00
+
+#define NONOS_RET_OK                            (0)
+#define NONOS_RET_ERR                           (0xFF)
+#define OSI_OK  NONOS_RET_OK
+
+#define __NON_OS_SYNC_OBJ_CLEAR_VALUE				0x11
+#define __NON_OS_SYNC_OBJ_SIGNAL_VALUE				0x22
+#define __NON_OS_LOCK_OBJ_UNLOCK_VALUE				0x33
+#define __NON_OS_LOCK_OBJ_LOCK_VALUE				0x44
+
+/*!
+	\brief type definition for the return values of this adaptation layer
+*/
+typedef _i8 _SlNonOsRetVal_t;
+
+/*!
+	\brief type definition for a time value
+*/
+typedef _u32 _SlNonOsTime_t;
+
+/*!
+	\brief 	type definition for a sync object container
+	
+	Sync object is object used to synchronize between two threads or thread and interrupt handler.
+	One thread is waiting on the object and the other thread send a signal, which then
+	release the waiting thread.
+	The signal must be able to be sent from interrupt context.
+	This object is generally implemented by binary semaphore or events.
+*/
+typedef _u8 _SlNonOsSemObj_t;
+
+
+#define _SlTime_t       _SlNonOsTime_t
+
+#define _SlSyncObj_t    _SlNonOsSemObj_t
+
+#define _SlLockObj_t    _SlNonOsSemObj_t
+
+#define SL_OS_WAIT_FOREVER     NONOS_WAIT_FOREVER
+
+#define SL_OS_RET_CODE_OK       NONOS_RET_OK       
+
+#define SL_OS_NO_WAIT           NONOS_NO_WAIT
+
+
+
+
+
+/*!
+	\brief 	This function creates a sync object
+
+	The sync object is used for synchronization between different thread or ISR and 
+	a thread.
+
+	\param	pSyncObj	-	pointer to the sync object control block
+	
+	\return upon successful creation the function return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsSyncObjCreate(pSyncObj)			_SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE)
+
+/*!
+	\brief 	This function deletes a sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+	
+	\return upon successful deletion the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsSyncObjDelete(pSyncObj)			_SlNonOsSemSet(pSyncObj,0)
+
+/*!
+	\brief 		This function generates a sync signal for the object. 
+	
+	All suspended threads waiting on this sync object are resumed
+
+	\param		pSyncObj	-	pointer to the sync object control block
+	
+	\return 	upon successful signaling the function should return 0
+				Otherwise, a negative value indicating the error code shall be returned
+	\note		the function could be called from ISR context
+	\warning
+*/
+#define _SlNonOsSyncObjSignal(pSyncObj)			_SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE)
+
+/*!
+	\brief 	This function waits for a sync signal of the specific sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+	\param	Timeout		-	numeric value specifies the maximum number of mSec to 
+							stay suspended while waiting for the sync signal
+							Currently, the simple link driver uses only two values:
+								- NONOS_WAIT_FOREVER
+								- NONOS_NO_WAIT
+	
+	\return upon successful reception of the signal within the timeout window return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsSyncObjWait(pSyncObj , Timeout)	_SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout)
+
+/*!
+	\brief 	This function clears a sync object
+
+	\param	pSyncObj	-	pointer to the sync object control block
+	
+	\return upon successful clearing the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsSyncObjClear(pSyncObj)			_SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE)
+
+/*!
+	\brief 	This function creates a locking object.
+	
+	The locking object is used for protecting a shared resources between different 
+	threads.
+
+	\param	pLockObj	-	pointer to the locking object control block
+	
+	\return upon successful creation the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsLockObjCreate(pLockObj)			_SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)
+
+/*!
+	\brief 	This function deletes a locking object.
+	
+	\param	pLockObj	-	pointer to the locking object control block
+	
+	\return upon successful deletion the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsLockObjDelete(pLockObj)			_SlNonOsSemSet(pLockObj,0)
+
+/*!
+	\brief 	This function locks a locking object. 
+	
+	All other threads that call this function before this thread calls 
+	the _SlNonOsLockObjUnlock would be suspended	
+	
+	\param	pLockObj	-	pointer to the locking object control block
+	\param	Timeout		-	numeric value specifies the maximum number of mSec to 
+							stay suspended while waiting for the locking object
+							Currently, the simple link driver uses only two values:
+								- NONOS_WAIT_FOREVER
+								- NONOS_NO_WAIT
+	
+	
+	\return upon successful reception of the locking object the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsLockObjLock(pLockObj , Timeout)	_SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout)
+
+/*!
+	\brief 	This function unlock a locking object.
+	
+	\param	pLockObj	-	pointer to the locking object control block
+	
+	\return upon successful unlocking the function should return 0
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+#define _SlNonOsLockObjUnlock(pLockObj)			_SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)
+
+
+/*!
+	\brief 	This function call the pEntry callback from a different context
+	
+	\param	pEntry		-	pointer to the entry callback function 
+	
+	\param	pValue		- 	pointer to any type of memory structure that would be
+							passed to pEntry callback from the execution thread.
+							
+	\param	flags		- 	execution flags - reserved for future usage
+	
+	\return upon successful registration of the spawn the function return 0
+			(the function is not blocked till the end of the execution of the function
+			and could be returned before the execution is actually completed)
+			Otherwise, a negative value indicating the error code shall be returned
+	\note
+	\warning
+*/
+_SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags);
+
+
+/*!
+	\brief 	This function must be called from the main loop in non-os paltforms
+	
+	\param	None
+	
+	\return 0 - No more activities
+			1 - Activity still in progress
+	\note
+	\warning
+*/
+_SlNonOsRetVal_t _SlNonOsMainLoopTask(void);
+
+extern _SlNonOsRetVal_t _SlNonOsSemGet(_SlNonOsSemObj_t* pSyncObj, _SlNonOsSemObj_t WaitValue, _SlNonOsSemObj_t SetValue, _SlNonOsTime_t Timeout);
+extern _SlNonOsRetVal_t _SlNonOsSemSet(_SlNonOsSemObj_t* pSemObj , _SlNonOsSemObj_t Value);
+extern _SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags);
+
+#if (defined(_SlSyncWaitLoopCallback))
+extern void _SlSyncWaitLoopCallback(void);
+#endif
+
+/*****************************************************************************
+
+    Overwrite SimpleLink driver OS adaptation functions
+
+
+ *****************************************************************************/
+
+#undef sl_SyncObjCreate
+#define sl_SyncObjCreate(pSyncObj,pName)           _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE)
+
+#undef sl_SyncObjDelete
+#define sl_SyncObjDelete(pSyncObj)                  _SlNonOsSemSet(pSyncObj,0)
+
+#undef sl_SyncObjSignal
+#define sl_SyncObjSignal(pSyncObj)                  _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE)
+
+#undef sl_SyncObjSignalFromIRQ
+#define sl_SyncObjSignalFromIRQ(pSyncObj)           _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE)
+
+#undef sl_SyncObjWait
+#define sl_SyncObjWait(pSyncObj,Timeout)            _SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout)
+
+#undef sl_LockObjCreate
+#define sl_LockObjCreate(pLockObj,pName)            _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)
+
+#undef sl_LockObjDelete
+#define sl_LockObjDelete(pLockObj)                  _SlNonOsSemSet(pLockObj,0)
+
+#undef sl_LockObjLock
+#define sl_LockObjLock(pLockObj,Timeout)            _SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout)
+
+#undef sl_LockObjUnlock
+#define sl_LockObjUnlock(pLockObj)                  _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE)
+
+#undef sl_Spawn
+#define sl_Spawn(pEntry,pValue,flags)               _SlNonOsSpawn(pEntry,pValue,flags)
+
+#undef _SlTaskEntry
+#define _SlTaskEntry                                _SlNonOsMainLoopTask
+
+
+#endif /* !SL_PLATFORM_MULTI_THREADED */
+
+#ifdef  __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif