DeepCover Embedded Security in IoT: Public-key Secured Data Paths
Dependencies: MaximInterface
The MAXREFDES155# is an internet-of-things (IoT) embedded-security reference design, built to authenticate and control a sensing node using elliptic-curve-based public-key cryptography with control and notification from a web server.
The hardware includes an ARM® mbed™ shield and attached sensor endpoint. The shield contains a DS2476 DeepCover® ECDSA/SHA-2 coprocessor, Wifi communication, LCD push-button controls, and status LEDs. The sensor endpoint is attached to the shield using a 300mm cable and contains a DS28C36 DeepCover ECDSA/SHA-2 authenticator, IR-thermal sensor, and aiming laser for the IR sensor. The MAXREFDES155# is equipped with a standard Arduino® form-factor shield connector for immediate testing using an mbed board such as the MAX32600MBED#. The combination of these two devices represent an IoT device. Communication to the web server is accomplished with the shield Wifi circuitry. Communication from the shield to the attached sensor module is accomplished over I2C . The sensor module represents an IoT endpoint that generates small data with a requirement for message authenticity/integrity and secure on/off operational control.
The design is hierarchical with each mbed platform and shield communicating data from the sensor node to a web server that maintains a centralized log and dispatches notifications as necessary. The simplicity of this design enables rapid integration into any star-topology IoT network to provide security with the low overhead and cost provided by the ECDSA-P256 asymmetric-key and SHA-256 symmetric-key algorithms.
More information about the MAXREFDES155# is available on the Maxim Integrated website.
xternal/simplelink/source/nonos.h@18:c2631e985780, 2019-12-03 (annotated)
- Committer:
- IanBenzMaxim
- Date:
- Tue Dec 03 12:56:25 2019 -0600
- Revision:
- 18:c2631e985780
- Parent:
- 16:a004191a79ab
Updated MaximInterface to version 2.1.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
IanBenzMaxim | 0:33d4e66780c0 | 1 | /* |
IanBenzMaxim | 0:33d4e66780c0 | 2 | * nonos.h - CC31xx/CC32xx Host Driver Implementation |
IanBenzMaxim | 0:33d4e66780c0 | 3 | * |
IanBenzMaxim | 0:33d4e66780c0 | 4 | * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ |
IanBenzMaxim | 0:33d4e66780c0 | 5 | * |
IanBenzMaxim | 0:33d4e66780c0 | 6 | * |
IanBenzMaxim | 0:33d4e66780c0 | 7 | * Redistribution and use in source and binary forms, with or without |
IanBenzMaxim | 0:33d4e66780c0 | 8 | * modification, are permitted provided that the following conditions |
IanBenzMaxim | 0:33d4e66780c0 | 9 | * are met: |
IanBenzMaxim | 0:33d4e66780c0 | 10 | * |
IanBenzMaxim | 0:33d4e66780c0 | 11 | * Redistributions of source code must retain the above copyright |
IanBenzMaxim | 0:33d4e66780c0 | 12 | * notice, this list of conditions and the following disclaimer. |
IanBenzMaxim | 0:33d4e66780c0 | 13 | * |
IanBenzMaxim | 0:33d4e66780c0 | 14 | * Redistributions in binary form must reproduce the above copyright |
IanBenzMaxim | 0:33d4e66780c0 | 15 | * notice, this list of conditions and the following disclaimer in the |
IanBenzMaxim | 0:33d4e66780c0 | 16 | * documentation and/or other materials provided with the |
IanBenzMaxim | 0:33d4e66780c0 | 17 | * distribution. |
IanBenzMaxim | 0:33d4e66780c0 | 18 | * |
IanBenzMaxim | 0:33d4e66780c0 | 19 | * Neither the name of Texas Instruments Incorporated nor the names of |
IanBenzMaxim | 0:33d4e66780c0 | 20 | * its contributors may be used to endorse or promote products derived |
IanBenzMaxim | 0:33d4e66780c0 | 21 | * from this software without specific prior written permission. |
IanBenzMaxim | 0:33d4e66780c0 | 22 | * |
IanBenzMaxim | 0:33d4e66780c0 | 23 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
IanBenzMaxim | 0:33d4e66780c0 | 24 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
IanBenzMaxim | 0:33d4e66780c0 | 25 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
IanBenzMaxim | 0:33d4e66780c0 | 26 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
IanBenzMaxim | 0:33d4e66780c0 | 27 | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
IanBenzMaxim | 0:33d4e66780c0 | 28 | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
IanBenzMaxim | 0:33d4e66780c0 | 29 | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
IanBenzMaxim | 0:33d4e66780c0 | 30 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
IanBenzMaxim | 0:33d4e66780c0 | 31 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
IanBenzMaxim | 0:33d4e66780c0 | 32 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
IanBenzMaxim | 0:33d4e66780c0 | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
IanBenzMaxim | 0:33d4e66780c0 | 34 | * |
IanBenzMaxim | 0:33d4e66780c0 | 35 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 36 | |
IanBenzMaxim | 0:33d4e66780c0 | 37 | #ifndef __NONOS_H__ |
IanBenzMaxim | 0:33d4e66780c0 | 38 | #define __NONOS_H__ |
IanBenzMaxim | 0:33d4e66780c0 | 39 | |
IanBenzMaxim | 0:33d4e66780c0 | 40 | #ifdef __cplusplus |
IanBenzMaxim | 0:33d4e66780c0 | 41 | extern "C" { |
IanBenzMaxim | 0:33d4e66780c0 | 42 | #endif |
IanBenzMaxim | 0:33d4e66780c0 | 43 | |
IanBenzMaxim | 0:33d4e66780c0 | 44 | |
IanBenzMaxim | 0:33d4e66780c0 | 45 | #ifndef SL_PLATFORM_MULTI_THREADED |
IanBenzMaxim | 0:33d4e66780c0 | 46 | |
IanBenzMaxim | 0:33d4e66780c0 | 47 | /* This function call the user defined function, if defined, from the sync wait loop */ |
IanBenzMaxim | 0:33d4e66780c0 | 48 | /* The use case of this function is to allow nonos system to call a user function to put the device into sleep */ |
IanBenzMaxim | 0:33d4e66780c0 | 49 | /* The wake up should be activated after getting an interrupt from the device to Host */ |
IanBenzMaxim | 0:33d4e66780c0 | 50 | /* The user function must return without blocking to prevent a delay on the event handling */ |
IanBenzMaxim | 0:33d4e66780c0 | 51 | /* |
IanBenzMaxim | 0:33d4e66780c0 | 52 | #define _SlSyncWaitLoopCallback UserSleepFunction |
IanBenzMaxim | 0:33d4e66780c0 | 53 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 54 | |
IanBenzMaxim | 0:33d4e66780c0 | 55 | #ifndef SL_TINY_EXT |
IanBenzMaxim | 0:33d4e66780c0 | 56 | #define NONOS_MAX_SPAWN_ENTRIES 5 |
IanBenzMaxim | 0:33d4e66780c0 | 57 | #else |
IanBenzMaxim | 0:33d4e66780c0 | 58 | #define NONOS_MAX_SPAWN_ENTRIES 1 |
IanBenzMaxim | 0:33d4e66780c0 | 59 | #endif |
IanBenzMaxim | 0:33d4e66780c0 | 60 | |
IanBenzMaxim | 0:33d4e66780c0 | 61 | |
IanBenzMaxim | 0:33d4e66780c0 | 62 | |
IanBenzMaxim | 0:33d4e66780c0 | 63 | typedef struct |
IanBenzMaxim | 0:33d4e66780c0 | 64 | { |
IanBenzMaxim | 0:33d4e66780c0 | 65 | _SlSpawnEntryFunc_t pEntry; |
IanBenzMaxim | 0:33d4e66780c0 | 66 | void* pValue; |
IanBenzMaxim | 0:33d4e66780c0 | 67 | _u8 IsAllocated; |
IanBenzMaxim | 0:33d4e66780c0 | 68 | }_SlNonOsSpawnEntry_t; |
IanBenzMaxim | 0:33d4e66780c0 | 69 | |
IanBenzMaxim | 0:33d4e66780c0 | 70 | typedef struct |
IanBenzMaxim | 0:33d4e66780c0 | 71 | { |
IanBenzMaxim | 0:33d4e66780c0 | 72 | _SlNonOsSpawnEntry_t SpawnEntries[NONOS_MAX_SPAWN_ENTRIES]; |
IanBenzMaxim | 0:33d4e66780c0 | 73 | }_SlNonOsCB_t; |
IanBenzMaxim | 0:33d4e66780c0 | 74 | |
IanBenzMaxim | 0:33d4e66780c0 | 75 | |
IanBenzMaxim | 0:33d4e66780c0 | 76 | #define NONOS_WAIT_FOREVER 0xFF |
IanBenzMaxim | 0:33d4e66780c0 | 77 | #define NONOS_NO_WAIT 0x00 |
IanBenzMaxim | 0:33d4e66780c0 | 78 | |
IanBenzMaxim | 0:33d4e66780c0 | 79 | #define NONOS_RET_OK (0) |
IanBenzMaxim | 0:33d4e66780c0 | 80 | #define NONOS_RET_ERR (0xFF) |
IanBenzMaxim | 0:33d4e66780c0 | 81 | #define OSI_OK NONOS_RET_OK |
IanBenzMaxim | 0:33d4e66780c0 | 82 | |
IanBenzMaxim | 0:33d4e66780c0 | 83 | #define __NON_OS_SYNC_OBJ_CLEAR_VALUE 0x11 |
IanBenzMaxim | 0:33d4e66780c0 | 84 | #define __NON_OS_SYNC_OBJ_SIGNAL_VALUE 0x22 |
IanBenzMaxim | 0:33d4e66780c0 | 85 | #define __NON_OS_LOCK_OBJ_UNLOCK_VALUE 0x33 |
IanBenzMaxim | 0:33d4e66780c0 | 86 | #define __NON_OS_LOCK_OBJ_LOCK_VALUE 0x44 |
IanBenzMaxim | 0:33d4e66780c0 | 87 | |
IanBenzMaxim | 0:33d4e66780c0 | 88 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 89 | \brief type definition for the return values of this adaptation layer |
IanBenzMaxim | 0:33d4e66780c0 | 90 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 91 | typedef _i8 _SlNonOsRetVal_t; |
IanBenzMaxim | 0:33d4e66780c0 | 92 | |
IanBenzMaxim | 0:33d4e66780c0 | 93 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 94 | \brief type definition for a time value |
IanBenzMaxim | 0:33d4e66780c0 | 95 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 96 | typedef _u32 _SlNonOsTime_t; |
IanBenzMaxim | 0:33d4e66780c0 | 97 | |
IanBenzMaxim | 0:33d4e66780c0 | 98 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 99 | \brief type definition for a sync object container |
IanBenzMaxim | 0:33d4e66780c0 | 100 | |
IanBenzMaxim | 0:33d4e66780c0 | 101 | Sync object is object used to synchronize between two threads or thread and interrupt handler. |
IanBenzMaxim | 0:33d4e66780c0 | 102 | One thread is waiting on the object and the other thread send a signal, which then |
IanBenzMaxim | 0:33d4e66780c0 | 103 | release the waiting thread. |
IanBenzMaxim | 0:33d4e66780c0 | 104 | The signal must be able to be sent from interrupt context. |
IanBenzMaxim | 0:33d4e66780c0 | 105 | This object is generally implemented by binary semaphore or events. |
IanBenzMaxim | 0:33d4e66780c0 | 106 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 107 | typedef _u8 _SlNonOsSemObj_t; |
IanBenzMaxim | 0:33d4e66780c0 | 108 | |
IanBenzMaxim | 0:33d4e66780c0 | 109 | |
IanBenzMaxim | 0:33d4e66780c0 | 110 | #define _SlTime_t _SlNonOsTime_t |
IanBenzMaxim | 0:33d4e66780c0 | 111 | |
IanBenzMaxim | 0:33d4e66780c0 | 112 | #define _SlSyncObj_t _SlNonOsSemObj_t |
IanBenzMaxim | 0:33d4e66780c0 | 113 | |
IanBenzMaxim | 0:33d4e66780c0 | 114 | #define _SlLockObj_t _SlNonOsSemObj_t |
IanBenzMaxim | 0:33d4e66780c0 | 115 | |
IanBenzMaxim | 0:33d4e66780c0 | 116 | #define SL_OS_WAIT_FOREVER NONOS_WAIT_FOREVER |
IanBenzMaxim | 0:33d4e66780c0 | 117 | |
IanBenzMaxim | 0:33d4e66780c0 | 118 | #define SL_OS_RET_CODE_OK NONOS_RET_OK |
IanBenzMaxim | 0:33d4e66780c0 | 119 | |
IanBenzMaxim | 0:33d4e66780c0 | 120 | #define SL_OS_NO_WAIT NONOS_NO_WAIT |
IanBenzMaxim | 0:33d4e66780c0 | 121 | |
IanBenzMaxim | 0:33d4e66780c0 | 122 | |
IanBenzMaxim | 0:33d4e66780c0 | 123 | |
IanBenzMaxim | 0:33d4e66780c0 | 124 | |
IanBenzMaxim | 0:33d4e66780c0 | 125 | |
IanBenzMaxim | 0:33d4e66780c0 | 126 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 127 | \brief This function creates a sync object |
IanBenzMaxim | 0:33d4e66780c0 | 128 | |
IanBenzMaxim | 0:33d4e66780c0 | 129 | The sync object is used for synchronization between different thread or ISR and |
IanBenzMaxim | 0:33d4e66780c0 | 130 | a thread. |
IanBenzMaxim | 0:33d4e66780c0 | 131 | |
IanBenzMaxim | 0:33d4e66780c0 | 132 | \param pSyncObj - pointer to the sync object control block |
IanBenzMaxim | 0:33d4e66780c0 | 133 | |
IanBenzMaxim | 0:33d4e66780c0 | 134 | \return upon successful creation the function return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 135 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 136 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 137 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 138 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 139 | #define _SlNonOsSyncObjCreate(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 140 | |
IanBenzMaxim | 0:33d4e66780c0 | 141 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 142 | \brief This function deletes a sync object |
IanBenzMaxim | 0:33d4e66780c0 | 143 | |
IanBenzMaxim | 0:33d4e66780c0 | 144 | \param pSyncObj - pointer to the sync object control block |
IanBenzMaxim | 0:33d4e66780c0 | 145 | |
IanBenzMaxim | 0:33d4e66780c0 | 146 | \return upon successful deletion the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 147 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 148 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 149 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 150 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 151 | #define _SlNonOsSyncObjDelete(pSyncObj) _SlNonOsSemSet(pSyncObj,0) |
IanBenzMaxim | 0:33d4e66780c0 | 152 | |
IanBenzMaxim | 0:33d4e66780c0 | 153 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 154 | \brief This function generates a sync signal for the object. |
IanBenzMaxim | 0:33d4e66780c0 | 155 | |
IanBenzMaxim | 0:33d4e66780c0 | 156 | All suspended threads waiting on this sync object are resumed |
IanBenzMaxim | 0:33d4e66780c0 | 157 | |
IanBenzMaxim | 0:33d4e66780c0 | 158 | \param pSyncObj - pointer to the sync object control block |
IanBenzMaxim | 0:33d4e66780c0 | 159 | |
IanBenzMaxim | 0:33d4e66780c0 | 160 | \return upon successful signaling the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 161 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 162 | \note the function could be called from ISR context |
IanBenzMaxim | 0:33d4e66780c0 | 163 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 164 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 165 | #define _SlNonOsSyncObjSignal(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 166 | |
IanBenzMaxim | 0:33d4e66780c0 | 167 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 168 | \brief This function waits for a sync signal of the specific sync object |
IanBenzMaxim | 0:33d4e66780c0 | 169 | |
IanBenzMaxim | 0:33d4e66780c0 | 170 | \param pSyncObj - pointer to the sync object control block |
IanBenzMaxim | 0:33d4e66780c0 | 171 | \param Timeout - numeric value specifies the maximum number of mSec to |
IanBenzMaxim | 0:33d4e66780c0 | 172 | stay suspended while waiting for the sync signal |
IanBenzMaxim | 0:33d4e66780c0 | 173 | Currently, the simple link driver uses only two values: |
IanBenzMaxim | 0:33d4e66780c0 | 174 | - NONOS_WAIT_FOREVER |
IanBenzMaxim | 0:33d4e66780c0 | 175 | - NONOS_NO_WAIT |
IanBenzMaxim | 0:33d4e66780c0 | 176 | |
IanBenzMaxim | 0:33d4e66780c0 | 177 | \return upon successful reception of the signal within the timeout window return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 178 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 179 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 180 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 181 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 182 | #define _SlNonOsSyncObjWait(pSyncObj , Timeout) _SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout) |
IanBenzMaxim | 0:33d4e66780c0 | 183 | |
IanBenzMaxim | 0:33d4e66780c0 | 184 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 185 | \brief This function clears a sync object |
IanBenzMaxim | 0:33d4e66780c0 | 186 | |
IanBenzMaxim | 0:33d4e66780c0 | 187 | \param pSyncObj - pointer to the sync object control block |
IanBenzMaxim | 0:33d4e66780c0 | 188 | |
IanBenzMaxim | 0:33d4e66780c0 | 189 | \return upon successful clearing the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 190 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 191 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 192 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 193 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 194 | #define _SlNonOsSyncObjClear(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 195 | |
IanBenzMaxim | 0:33d4e66780c0 | 196 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 197 | \brief This function creates a locking object. |
IanBenzMaxim | 0:33d4e66780c0 | 198 | |
IanBenzMaxim | 0:33d4e66780c0 | 199 | The locking object is used for protecting a shared resources between different |
IanBenzMaxim | 0:33d4e66780c0 | 200 | threads. |
IanBenzMaxim | 0:33d4e66780c0 | 201 | |
IanBenzMaxim | 0:33d4e66780c0 | 202 | \param pLockObj - pointer to the locking object control block |
IanBenzMaxim | 0:33d4e66780c0 | 203 | |
IanBenzMaxim | 0:33d4e66780c0 | 204 | \return upon successful creation the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 205 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 206 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 207 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 208 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 209 | #define _SlNonOsLockObjCreate(pLockObj) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 210 | |
IanBenzMaxim | 0:33d4e66780c0 | 211 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 212 | \brief This function deletes a locking object. |
IanBenzMaxim | 0:33d4e66780c0 | 213 | |
IanBenzMaxim | 0:33d4e66780c0 | 214 | \param pLockObj - pointer to the locking object control block |
IanBenzMaxim | 0:33d4e66780c0 | 215 | |
IanBenzMaxim | 0:33d4e66780c0 | 216 | \return upon successful deletion the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 217 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 218 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 219 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 220 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 221 | #define _SlNonOsLockObjDelete(pLockObj) _SlNonOsSemSet(pLockObj,0) |
IanBenzMaxim | 0:33d4e66780c0 | 222 | |
IanBenzMaxim | 0:33d4e66780c0 | 223 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 224 | \brief This function locks a locking object. |
IanBenzMaxim | 0:33d4e66780c0 | 225 | |
IanBenzMaxim | 0:33d4e66780c0 | 226 | All other threads that call this function before this thread calls |
IanBenzMaxim | 0:33d4e66780c0 | 227 | the _SlNonOsLockObjUnlock would be suspended |
IanBenzMaxim | 0:33d4e66780c0 | 228 | |
IanBenzMaxim | 0:33d4e66780c0 | 229 | \param pLockObj - pointer to the locking object control block |
IanBenzMaxim | 0:33d4e66780c0 | 230 | \param Timeout - numeric value specifies the maximum number of mSec to |
IanBenzMaxim | 0:33d4e66780c0 | 231 | stay suspended while waiting for the locking object |
IanBenzMaxim | 0:33d4e66780c0 | 232 | Currently, the simple link driver uses only two values: |
IanBenzMaxim | 0:33d4e66780c0 | 233 | - NONOS_WAIT_FOREVER |
IanBenzMaxim | 0:33d4e66780c0 | 234 | - NONOS_NO_WAIT |
IanBenzMaxim | 0:33d4e66780c0 | 235 | |
IanBenzMaxim | 0:33d4e66780c0 | 236 | |
IanBenzMaxim | 0:33d4e66780c0 | 237 | \return upon successful reception of the locking object the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 238 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 239 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 240 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 241 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 242 | #define _SlNonOsLockObjLock(pLockObj , Timeout) _SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout) |
IanBenzMaxim | 0:33d4e66780c0 | 243 | |
IanBenzMaxim | 0:33d4e66780c0 | 244 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 245 | \brief This function unlock a locking object. |
IanBenzMaxim | 0:33d4e66780c0 | 246 | |
IanBenzMaxim | 0:33d4e66780c0 | 247 | \param pLockObj - pointer to the locking object control block |
IanBenzMaxim | 0:33d4e66780c0 | 248 | |
IanBenzMaxim | 0:33d4e66780c0 | 249 | \return upon successful unlocking the function should return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 250 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 251 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 252 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 253 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 254 | #define _SlNonOsLockObjUnlock(pLockObj) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 255 | |
IanBenzMaxim | 0:33d4e66780c0 | 256 | |
IanBenzMaxim | 0:33d4e66780c0 | 257 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 258 | \brief This function call the pEntry callback from a different context |
IanBenzMaxim | 0:33d4e66780c0 | 259 | |
IanBenzMaxim | 0:33d4e66780c0 | 260 | \param pEntry - pointer to the entry callback function |
IanBenzMaxim | 0:33d4e66780c0 | 261 | |
IanBenzMaxim | 0:33d4e66780c0 | 262 | \param pValue - pointer to any type of memory structure that would be |
IanBenzMaxim | 0:33d4e66780c0 | 263 | passed to pEntry callback from the execution thread. |
IanBenzMaxim | 0:33d4e66780c0 | 264 | |
IanBenzMaxim | 0:33d4e66780c0 | 265 | \param flags - execution flags - reserved for future usage |
IanBenzMaxim | 0:33d4e66780c0 | 266 | |
IanBenzMaxim | 0:33d4e66780c0 | 267 | \return upon successful registration of the spawn the function return 0 |
IanBenzMaxim | 0:33d4e66780c0 | 268 | (the function is not blocked till the end of the execution of the function |
IanBenzMaxim | 0:33d4e66780c0 | 269 | and could be returned before the execution is actually completed) |
IanBenzMaxim | 0:33d4e66780c0 | 270 | Otherwise, a negative value indicating the error code shall be returned |
IanBenzMaxim | 0:33d4e66780c0 | 271 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 272 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 273 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 274 | _SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags); |
IanBenzMaxim | 0:33d4e66780c0 | 275 | |
IanBenzMaxim | 0:33d4e66780c0 | 276 | |
IanBenzMaxim | 0:33d4e66780c0 | 277 | /*! |
IanBenzMaxim | 0:33d4e66780c0 | 278 | \brief This function must be called from the main loop in non-os paltforms |
IanBenzMaxim | 0:33d4e66780c0 | 279 | |
IanBenzMaxim | 0:33d4e66780c0 | 280 | \param None |
IanBenzMaxim | 0:33d4e66780c0 | 281 | |
IanBenzMaxim | 0:33d4e66780c0 | 282 | \return 0 - No more activities |
IanBenzMaxim | 0:33d4e66780c0 | 283 | 1 - Activity still in progress |
IanBenzMaxim | 0:33d4e66780c0 | 284 | \note |
IanBenzMaxim | 0:33d4e66780c0 | 285 | \warning |
IanBenzMaxim | 0:33d4e66780c0 | 286 | */ |
IanBenzMaxim | 0:33d4e66780c0 | 287 | _SlNonOsRetVal_t _SlNonOsMainLoopTask(void); |
IanBenzMaxim | 0:33d4e66780c0 | 288 | |
IanBenzMaxim | 0:33d4e66780c0 | 289 | extern _SlNonOsRetVal_t _SlNonOsSemGet(_SlNonOsSemObj_t* pSyncObj, _SlNonOsSemObj_t WaitValue, _SlNonOsSemObj_t SetValue, _SlNonOsTime_t Timeout); |
IanBenzMaxim | 0:33d4e66780c0 | 290 | extern _SlNonOsRetVal_t _SlNonOsSemSet(_SlNonOsSemObj_t* pSemObj , _SlNonOsSemObj_t Value); |
IanBenzMaxim | 0:33d4e66780c0 | 291 | extern _SlNonOsRetVal_t _SlNonOsSpawn(_SlSpawnEntryFunc_t pEntry , void* pValue , _u32 flags); |
IanBenzMaxim | 0:33d4e66780c0 | 292 | |
IanBenzMaxim | 0:33d4e66780c0 | 293 | #if (defined(_SlSyncWaitLoopCallback)) |
IanBenzMaxim | 0:33d4e66780c0 | 294 | extern void _SlSyncWaitLoopCallback(void); |
IanBenzMaxim | 0:33d4e66780c0 | 295 | #endif |
IanBenzMaxim | 0:33d4e66780c0 | 296 | |
IanBenzMaxim | 0:33d4e66780c0 | 297 | /***************************************************************************** |
IanBenzMaxim | 0:33d4e66780c0 | 298 | |
IanBenzMaxim | 0:33d4e66780c0 | 299 | Overwrite SimpleLink driver OS adaptation functions |
IanBenzMaxim | 0:33d4e66780c0 | 300 | |
IanBenzMaxim | 0:33d4e66780c0 | 301 | |
IanBenzMaxim | 0:33d4e66780c0 | 302 | *****************************************************************************/ |
IanBenzMaxim | 0:33d4e66780c0 | 303 | |
IanBenzMaxim | 0:33d4e66780c0 | 304 | #undef sl_SyncObjCreate |
IanBenzMaxim | 0:33d4e66780c0 | 305 | #define sl_SyncObjCreate(pSyncObj,pName) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_CLEAR_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 306 | |
IanBenzMaxim | 0:33d4e66780c0 | 307 | #undef sl_SyncObjDelete |
IanBenzMaxim | 0:33d4e66780c0 | 308 | #define sl_SyncObjDelete(pSyncObj) _SlNonOsSemSet(pSyncObj,0) |
IanBenzMaxim | 0:33d4e66780c0 | 309 | |
IanBenzMaxim | 0:33d4e66780c0 | 310 | #undef sl_SyncObjSignal |
IanBenzMaxim | 0:33d4e66780c0 | 311 | #define sl_SyncObjSignal(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 312 | |
IanBenzMaxim | 0:33d4e66780c0 | 313 | #undef sl_SyncObjSignalFromIRQ |
IanBenzMaxim | 0:33d4e66780c0 | 314 | #define sl_SyncObjSignalFromIRQ(pSyncObj) _SlNonOsSemSet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 315 | |
IanBenzMaxim | 0:33d4e66780c0 | 316 | #undef sl_SyncObjWait |
IanBenzMaxim | 0:33d4e66780c0 | 317 | #define sl_SyncObjWait(pSyncObj,Timeout) _SlNonOsSemGet(pSyncObj,__NON_OS_SYNC_OBJ_SIGNAL_VALUE,__NON_OS_SYNC_OBJ_CLEAR_VALUE,Timeout) |
IanBenzMaxim | 0:33d4e66780c0 | 318 | |
IanBenzMaxim | 0:33d4e66780c0 | 319 | #undef sl_LockObjCreate |
IanBenzMaxim | 0:33d4e66780c0 | 320 | #define sl_LockObjCreate(pLockObj,pName) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 321 | |
IanBenzMaxim | 0:33d4e66780c0 | 322 | #undef sl_LockObjDelete |
IanBenzMaxim | 0:33d4e66780c0 | 323 | #define sl_LockObjDelete(pLockObj) _SlNonOsSemSet(pLockObj,0) |
IanBenzMaxim | 0:33d4e66780c0 | 324 | |
IanBenzMaxim | 0:33d4e66780c0 | 325 | #undef sl_LockObjLock |
IanBenzMaxim | 0:33d4e66780c0 | 326 | #define sl_LockObjLock(pLockObj,Timeout) _SlNonOsSemGet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE,__NON_OS_LOCK_OBJ_LOCK_VALUE,Timeout) |
IanBenzMaxim | 0:33d4e66780c0 | 327 | |
IanBenzMaxim | 0:33d4e66780c0 | 328 | #undef sl_LockObjUnlock |
IanBenzMaxim | 0:33d4e66780c0 | 329 | #define sl_LockObjUnlock(pLockObj) _SlNonOsSemSet(pLockObj,__NON_OS_LOCK_OBJ_UNLOCK_VALUE) |
IanBenzMaxim | 0:33d4e66780c0 | 330 | |
IanBenzMaxim | 0:33d4e66780c0 | 331 | #undef sl_Spawn |
IanBenzMaxim | 0:33d4e66780c0 | 332 | #define sl_Spawn(pEntry,pValue,flags) _SlNonOsSpawn(pEntry,pValue,flags) |
IanBenzMaxim | 0:33d4e66780c0 | 333 | |
IanBenzMaxim | 0:33d4e66780c0 | 334 | #undef _SlTaskEntry |
IanBenzMaxim | 0:33d4e66780c0 | 335 | #define _SlTaskEntry _SlNonOsMainLoopTask |
IanBenzMaxim | 0:33d4e66780c0 | 336 | |
IanBenzMaxim | 0:33d4e66780c0 | 337 | |
IanBenzMaxim | 0:33d4e66780c0 | 338 | #endif /* !SL_PLATFORM_MULTI_THREADED */ |
IanBenzMaxim | 0:33d4e66780c0 | 339 | |
IanBenzMaxim | 0:33d4e66780c0 | 340 | #ifdef __cplusplus |
IanBenzMaxim | 0:33d4e66780c0 | 341 | } |
IanBenzMaxim | 0:33d4e66780c0 | 342 | #endif /* __cplusplus */ |
IanBenzMaxim | 0:33d4e66780c0 | 343 | |
IanBenzMaxim | 0:33d4e66780c0 | 344 | #endif |