File content as of revision 2:296485923589:

#include <mbed.h>
#include <string>
#include "MAX31856.h"

#define LOG(args...)    printf(args)

MAX31856::MAX31856(SPI& _spi, PinName _ncs, uint8_t _type, uint8_t _fltr, uint8_t _samples, uint8_t _conversion_mode) : spi(_spi), ncs(_ncs), samples(_samples) {  //, setThermocoupleType(_type), setEmiFilterFreq(_fltr)
    spi.format(8,3);
    setThermocoupleType(_type);
    setEmiFilterFreq(_fltr);
    setNumSamplesAvg(_samples);
    setConversionMode(_conversion_mode);
}

float MAX31856::readTC()
{
    int32_t temp;
    uint8_t buf_read[3], buf_write[3]={ADDRESS_LTCBH_READ,ADDRESS_LTCBM_READ,ADDRESS_LTCBL_READ};
    
//    uint32_t time = us_ticker_read();
//    uint32_t duration = time - lastReadTime;
//    if (duration > 200000) {   // more than 250ms
        for(int i=0; i<3; i++) {
            spiEnable();
            buf_read[i]=spi.write(buf_write[i]);
            buf_read[i]=spi.write(buf_write[i]);
            spiDisable();
        }   

    
//    spiEnable();
//    buf_read[0]=spi.write(0x0C);
//    buf_read[0]=spi.write(0x0C);
//    buf_read[1]=spi.write(0x0C);
//    buf_read[2]=spi.write(0x0C);
//    spiDisable();

        
        //Convert the registers contents into the correct value
        temp =((buf_read[0] & 0xFF) << 11);       //Shift Byte 2 into place
        temp|=((buf_read[1] & 0xFF) << 3);        //Shift Byte 1 into place
        temp|=((buf_read[2] & 0xFF) >> 5);        //Shift Byte 0 into place
        float val=(temp/128.0f);            //Divide the binary string by 2 to the 7th power
        return val;
//  }
}

float MAX31856::readCJ()
{
    int32_t temp;
    uint8_t buf_read[3], buf_write=ADDRESS_CJTH_READ;
    
    spiEnable();
    for(int i=0; i<3; i++)
    {
        buf_read[i]=spi.write(buf_write);
    }
    spiDisable();
    
    //Convert the registers contents into the correct value
    temp =((int32_t)(buf_read[1] << 6));        //Shift the MSB into place
    temp|=((int32_t)(buf_read[2] >> 2));        //Shift the LSB into place
    float val=((float)(temp/64.0));             //Divide the binary string by 2 to the 6th power
    
    return val;
}

//Register:CR0    Bits: 7
bool MAX31856::setConversionMode(uint8_t val) {
    if      (val==CR0_CONV_MODE_NORMALLY_OFF) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_7, val);
        conversion_mode=0;
        LOG("Register containing\t\t","setConversionMode","\t\twas programmed with the parameter\t\t","CR0_CONV_MODE_NORMALLY_OFF");
    } 
    else if (val==CR0_CONV_MODE_NORMALLY_ON) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_7, val);
        conversion_mode=1;
        LOG("Register containing\t\t","setConversionMode","\t\twas programmed with the parameter\t\t","CR0_CONV_MODE_NORMALLY_ON");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bit 7. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR0    Bits: 6
bool MAX31856::setOneShotMode(uint8_t val) {
    if      (val==CR0_1_SHOT_MODE_NO_CONVERSION) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_6, val);
        LOG("Register containing\t\t","setOneShotMode","\t\twas programmed with the parameter\t\t","CR0_1_SHOT_MODE_NO_CONVERSIONS");
    }
    else if (val==CR0_1_SHOT_MODE_ONE_CONVERSION) { 
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_6, val);
        LOG("Register containing\t\t","setOneShotMode","\t\twas programmed with the parameter\t\t","CR0_1_SHOT_MODE_NO_CONVERSIONS");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bit 6. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR0    Bits: 5:4
bool MAX31856::setOpenCircuitFaultDetection(uint8_t val) {
    if      (val==CR0_OC_DETECT_DISABLED) { 
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_5_4, val);
        LOG("Register containing\t\t","setOpenCircuitFaultDetection","\t\twas programmed with the parameter\t\t","CR0_OC_DETECT_DISABLED");
    }
    else if (val==CR0_OC_DETECT_ENABLED_R_LESS_5k) {  
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_5_4, val);
        LOG("Register containing\t\t","setOpenCircuitFaultDetection","\t\twas programmed with the parameter\t\t","CR0_OC_DETECT_ENABLED_R_LESS_5k");
    }
    else if (val==CR0_OC_DETECT_ENABLED_TC_LESS_2ms) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_5_4, val);
        LOG("Register containing\t\t","setOpenCircuitFaultDetection","\t\twas programmed with the parameter\t\t","CR0_OC_DETECT_ENABLED_TC_LESS_2ms");
    }
    else if (val==CR0_OC_DETECT_ENABLED_TC_MORE_2ms) { 
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_5_4, val);
        LOG("Register containing\t\t","setOpenCircuitFaultDetection","\t\twas programmed with the parameter\t\t","CR0_OC_DETECT_ENABLED_TC_MORE_2ms");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bits 5:4. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR0    Bits: 3
bool MAX31856::setColdJunctionDisable(uint8_t val) {
    if (val==CR0_COLD_JUNC_ENABLE) { 
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_3, val);
        cold_junction_enabled=1;
        LOG("Register containing\t\t","setColdJunctionDisable","\t\twas programmed with the parameter\t\t","CR0_COLD_JUNC_ENABLE");
    }
    else if (val==CR0_COLD_JUNC_DISABLE) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_3, val);
        cold_junction_enabled=0;
        LOG("Register containing\t\t","setColdJunctionDisable","\t\twas programmed with the parameter\t\t","CR0_COLD_JUNC_DISABLE");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bit 3. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR0    Bits: 2
bool MAX31856::setFaultMode(uint8_t val) {
    if      (val==CR0_FAULT_MODE_COMPARATOR) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_2, val);
        LOG("Register containing\t\t","setFaultMode","\t\twas programmed with the parameter\t\t","CR0_FAULT_MODE_COMPARATOR");
    }
    else if (val==CR0_FAULT_MODE_INTERUPT) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_2, val);
        LOG("Register containing\t\t","setFaultMode","\t\twas programmed with the parameter\t\t","CR0_FAULT_MODE_INTERUPT");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bit 2. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR0    Bits: 1
bool MAX31856::setFaultStatusClear(uint8_t val) {
    if      (val==CR0_FAULTCLR_DEFAULT_VAL) { 
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_1, val);
        LOG("Register containing\t\t","setFaultStatusClear","\t\twas programmed with the parameter\t\t","CR0_FAULTCLR_DEFAULT_VAL");
    }
    else if (val==CR0_FAULTCLR_RETURN_FAULTS_TO_ZERO) { 
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_1, val);
        LOG("Register containing\t\t","setFaultStatusClear","\t\twas programmed with the parameter\t\t","CR0_FAULTCLR_RETURN_FAULTS_TO_ZERO");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bit 1. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR0    Bits: 0
bool MAX31856::setEmiFilterFreq(uint8_t val) {
    if      (val==CR0_FILTER_OUT_60Hz) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_0, val);
        filter_mode=0;
        LOG("Register containing\t\t","setEmiFilterFreq","\t\twas programmed with the parameter\t\t","CR0_FILTER_OUT_60Hz");
    }
    else if (val==CR0_FILTER_OUT_50Hz) {
        return_val=registerReadWriteByte(ADDRESS_CR0_READ, ADDRESS_CR0_WRITE, CR0_CLEAR_BITS_0, val);
        filter_mode=1;
        LOG("Register containing\t\t","setEmiFilterFreq","\t\twas programmed with the parameter\t\t","CR0_FILTER_OUT_50Hz");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 0 (CR0) bit 0. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR1    Bits: 6:4
bool MAX31856::setNumSamplesAvg(uint8_t val) {   
    if      (val==CR1_AVG_TC_SAMPLES_1) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_6_4, val);
        samples=1;
        LOG("Register containing\t\t","setNumSamplesAvg","\t\twas programmed with the parameter\t\t","CR1_AVG_TC_SAMPLES_1");
    }
    else if (val==CR1_AVG_TC_SAMPLES_2) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_6_4, val);
        samples=2;
        LOG("Register containing\t\t","setNumSamplesAvg","\t\twas programmed with the parameter\t\t","CR1_AVG_TC_SAMPLES_2");
    }
    else if (val==CR1_AVG_TC_SAMPLES_4) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_6_4, val);
        samples=4;
        LOG("Register containing\t\t","setNumSamplesAvg","\t\twas programmed with the parameter\t\t","CR1_AVG_TC_SAMPLES_4");
    }
    else if (val==CR1_AVG_TC_SAMPLES_8) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_6_4, val);
        samples=8;
        LOG("Register containing\t\t","setNumSamplesAvg","\t\twas programmed with the parameter\t\t","CR1_AVG_TC_SAMPLES_8");
    }
    else if (val==CR1_AVG_TC_SAMPLES_16) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_6_4, val);
        samples=16;
        LOG("Register containing\t\t","setNumSamplesAvg","\t\twas programmed with the parameter\t\t","CR1_AVG_TC_SAMPLES_16");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 1 (CR1) bits 6:4. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:CR1    Bits: 3:0
bool MAX31856::setThermocoupleType(uint8_t val) {   
    if      (val==CR1_TC_TYPE_B) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_B");
    }
    else if (val==CR1_TC_TYPE_E) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_E");
    }
    else if (val==CR1_TC_TYPE_J) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_J");
    }
    else if (val==CR1_TC_TYPE_K) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_K");
    }
    else if (val==CR1_TC_TYPE_N) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_N");
    }
    else if (val==CR1_TC_TYPE_R) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_R");
    }
    else if (val==CR1_TC_TYPE_S) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_S");
    }
    else if (val==CR1_TC_TYPE_T) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=false;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_T");
    }
    else if (val==CR1_TC_TYPE_VOLT_MODE_GAIN_8) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=true;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_VOLT_MODE_GAIN_8");
    }
    else if (val==CR1_TC_TYPE_VOLT_MODE_GAIN_32) {
        return_val=registerReadWriteByte(ADDRESS_CR1_READ, ADDRESS_CR1_WRITE, CR1_CLEAR_BITS_3_0, val);
        voltage_mode=true;
        LOG("Register containing\t\t","setThermocoupleType","\t\twas programmed with the parameter\t\t","CR1_TC_TYPE_VOLT_MODE_GAIN_32");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 1 (CR1) bits 3:0. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:MASK    Bits: 5:0
bool MAX31856::setFaultMasks(uint8_t val, bool enable) {
    uint8_t temp_val;
    if(enable)
        temp_val=0;
    else
        temp_val=val;
    if      (val==MASK_CJ_FAULT_THRESHOLD_HIGH) {          //Cold Junction High Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_5, temp_val);
        LOG("Register containing\t\t","setFaultMasks","\t\twas programmed with the parameter\t\t","MASK_CJ_FAULT_THRESHOLD_HIGH");
    }
    else if (val==MASK_CJ_FAULT_THRESHOLD_LOW) {           //Cold Junction Low  Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_4, temp_val);
        LOG("Register containing\t\t","setFaultMasks","\t\twas programmed with the parameter\t\t","MASK_CJ_FAULT_THRESHOLD_LOW");
    }
    else if (val==MASK_TC_FAULT_THRESHOLD_HIGH) {          //Thermocouple High Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_3, temp_val);
        LOG("Register containing\t\t","setFaultMasks","\t\twas programmed with the parameter\t\t","MASK_TC_FAULT_THRESHOLD_HIGH");
    }
    else if (val==MASK_TC_FAULT_THRESHOLD_LOW) {           //Thermocouple Low  Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_2, temp_val);
        LOG("Register containing\t\t","setFaultMasks","\t\twas programmed with the parameter\t\t","MASK_TC_FAULT_THRESHOLD_LOW");
    }
    else if (val==MASK_OVER_UNDER_VOLT_FAULT) {            //Over-Voltage/Under-Voltage Input Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_1, temp_val);
        LOG("Register containing\t\t","setFaultMasks","\t\twas programmed with the parameter\t\t","MASK_OVER_UNDER_VOLT_FAULT");
    }
    else if (val==MASK_OPEN_CIRCUIT_FAULT) {               //Thermocouple Open-Circuit Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_0, temp_val);
        LOG("Register containing\t\t","setFaultMasks","\t\twas programmed with the parameter\t\t","MASK_OPEN_CIRCUIT_FAULT");
    }
    else {
        LOG("Incorrect parameter selected for Control Register 1 (CR1) bits 3:0. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}

//Register:MASK    Bits: 5:0
float MAX31856::setFaultThresholds(uint8_t val, bool enable_mask, float temperature) {
    float return_val;///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////ghjkcghjcfczseraweraenaet aert e
    uint8_t temp_val;
    if(enable_mask) {
        temp_val=0;
    }
    else {
        temp_val=val;
    }
    if      (val==MASK_CJ_FAULT_THRESHOLD_HIGH) {          //Cold Junction High Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_5, temp_val);
        
        int8_t temperature_byte=temperature;
        
        if      (temperature_byte>CJ_MAX_VAL_FAULT)
            temperature_byte=CJ_MAX_VAL_FAULT;
        else if (temperature_byte<=0 || temperature_byte>=CJ_MIN_VAL_FAULT)            
            temperature_byte=twosComplimentToSigned8(temperature_byte);    //Convert the 2's compliment int into a signed value
        else if (temperature_byte<CJ_MIN_VAL_FAULT)
            temperature_byte=twosComplimentToSigned8(CJ_MIN_VAL_FAULT);    //Convert the 2's compliment int into a signed value
        //else the data is within range, no more manipulation of data is needed
        return_val=registerWriteByte(ADDRESS_CJHF_WRITE, temperature_byte);
    }
    else if (val==MASK_CJ_FAULT_THRESHOLD_LOW) {           //Cold Junction Low  Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_4, temp_val);
        
        int8_t temperature_byte=temperature;
        
        if      (temperature_byte>CJ_MAX_VAL_FAULT)
            temperature_byte=CJ_MAX_VAL_FAULT;
        else if (temperature_byte<=0 || temperature_byte>=CJ_MIN_VAL_FAULT) 
            temperature_byte=twosComplimentToSigned8(temperature_byte);    //Convert the 2's compliment int into a signed value
        else if (temperature_byte<CJ_MIN_VAL_FAULT)
            temperature_byte=twosComplimentToSigned8(CJ_MIN_VAL_FAULT);    //Convert the 2's compliment int into a signed value
        //else the data is within range, no more manipulation of data is needed
        
        return_val=registerWriteByte(ADDRESS_CJLF_WRITE, temperature_byte);
    }
    else if (val==MASK_TC_FAULT_THRESHOLD_HIGH) {          //Thermocouple High Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_3, temp_val);
        
        if (temperature) {
            int8_t temperature_byte[2];
            int16_t temperature_multi_byte =(int16_t)(temperature*4.0);
            if      (temperature_multi_byte>(TC_MAX_VAL_FAULT*4.0f))                     
                temperature_multi_byte=TC_MAX_VAL_FAULT*4.0f;
            else if (temperature_multi_byte<=0 || temperature_multi_byte>=(TC_MIN_VAL_FAULT*4.0f)) 
                temperature_multi_byte=twosComplimentToSigned16(temperature_multi_byte);    //Convert the 2's compliment int into a signed value
            else if (temperature_multi_byte<(TC_MIN_VAL_FAULT*4.0f))
                temperature_multi_byte=twosComplimentToSigned16(TC_MIN_VAL_FAULT*4.0f);    //Convert the 2's compliment int into a signed value
            
            //now split up the 32bit int into two bytes to program the registers with
            temperature_byte[0]=((uint8_t)((temperature_multi_byte)&(0xFF00) >> 8));
            temperature_byte[1]=((uint8_t)((temperature_multi_byte)&(0x00FF)));
            
            return_val=registerWriteByte(ADDRESS_LTHFTH_WRITE, temperature_byte[0]);
            return_val=registerWriteByte(ADDRESS_LTHFTL_WRITE, temperature_byte[1]);
            
            return_val=temperature;
        }
//        else {
//            /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////return_val="WHATEVER IS IN THE REGISTERS WHEN YOU SET THE FLAG JUST INCASE YOU NEED TO SEE WHAT IS INSISIDE THE REGISTER";
//        }
    }
    else if (val==MASK_TC_FAULT_THRESHOLD_LOW)            //Thermocouple Low  Threshold Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_2, temp_val);
    else if (val==MASK_OVER_UNDER_VOLT_FAULT)             //Over-Voltage/Under-Voltage Input Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_1, temp_val);
    else if (val==MASK_OPEN_CIRCUIT_FAULT)                //Thermocouple Open-Circuit Fault Mask
        return_val=registerReadWriteByte(ADDRESS_MASK_READ, ADDRESS_MASK_WRITE, MASK_CLEAR_BITS_0, temp_val);
    else {
        LOG("Incorrect parameter selected for MASK Register. Default value not changed.\r\nPlease see MAX31856.h for list of valid parameters. \r\n"); 
        return_val=0; //returns a 0 to flag that the parameter wasn't programmed due to wrong parameter in function call
    }
    return return_val;
}






//The following functions are for internal library use only
void MAX31856::spiEnable() {
    ncs=0; //Set CS high to start transmission (interrupts conversion)
    return;
}
void MAX31856::spiDisable() {
    ncs=1; //Set CS low to stop transmission (restarts conversion)
    return;
}

bool MAX31856::registerReadWriteByte(uint8_t read_address, uint8_t write_address, uint8_t clear_bits, uint8_t val) {   
    uint8_t buf_read[2];
    
    //Read the current contents of a register
    spiEnable();
    for(int i=0; i<2; i++) {
        buf_read[i]=spi.write(read_address);
    }
    spiDisable();
    
    //Modify contents pulled from the register 
    buf_read[1]&=clear_bits;    //Clear the contents of bits of parameter you are trying to clear for later or equal operation
    buf_read[1]|=val;       //Bitwise OR the input parameter with cleaned buf_read[1] to create new byte
    val=buf_read[1];
    
    //Write the updated byte to the register 
    spiEnable();
    buf_read[0]=spi.write(write_address);
    buf_read[1]=spi.write(val);
    spiDisable();
    return true;
}

bool MAX31856::registerWriteByte(uint8_t write_address, uint8_t val) {   
    uint8_t buf_read[2];
    //Write the updated byte to the register 
    spiEnable();
    buf_read[0]=spi.write(write_address);
    buf_read[1]=spi.write(val);
    spiDisable();
    return true;
}

int8_t MAX31856::twosComplimentToSigned8(int8_t temp){
    temp=(~(temp)+1);               //Take two's complement of the negative number
    temp|=(int8_t)(0x80UL);                 //And convert it into 7-bit val with msb as sign bit
    return temp;
}
int16_t MAX31856::twosComplimentToSigned16(int16_t temp){
    temp=(~(temp)+1);               //Take two's complement of the negative number
    temp|=(int16_t)(0x8000UL);               //And convert it into 15-bit val with msb as sign bit
    return temp;
}

//void MAX31856::printSetting(string register_bits, string register_info) {
//    printf("Register containing\t\t",register_bits, "\t\twas programmed with the parameter\t\t",register_info);
//}

//bool MAX31856::checkForFaults() {
//    
//}




///Define parameters for control register one (CR1)
/** Adding Samples increases the conversion time and reduces noise.
    Typical conversion times:
        1-shot or first conversion in Auto mode:
            = t_Conversion + (samples-1)*33.33mS (60Hz rejection)
            = t_Conversion + (samples-1)*40.00mS (50Hz rejection)
        2 thru n conversions in Auto mode:
            = t_Conversion + (samples-1)*16.67mS (60Hz rejection)
            = t_Conversion + (samples-1)*20.00mS (50Hz rejection)
*/



//uint32_t MAX31856::calculateDelayTime() {
//    uint32_t delayTime;
//    
//    if      (auto_convert_mode==1 && samples==1) { //single conversion
//        if (filter_mode==0)  //60Hz
//            delayTime=82+(samples-1)*33.33f;
//        if (filter_mode==1)  //50Hz
//            delayTime=98+(samples-1)*40.00f;
//    }
//    else if (auto_convert_mode==1 && samples>1) { //single conversion
//        if (filter_mode==0)  //60Hz
//            delayTime=82+(samples-1)*33.33f;
//        if (filter_mode==1)  //50Hz
//            delayTime=98+(samples-1)*40.00f;
//    }
//    
//            
//            
//            
//auto 50   169
//auto 60   143
//1shot 50  98
//1shot 60  82