Diff: MSS.h

Revision:

0:1a2637f8e2dd

diff -r 000000000000 -r 1a2637f8e2dd MSS.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MSS.h	Tue Feb 09 00:23:22 2016 +0000
@@ -0,0 +1,196 @@
+#ifndef _MSS_H_
+#define _MSS_H_
+
+#if defined (TARGET_KL25Z)
+/* I2C */
+#define PIN_SCL  PTE1
+#define PIN_SDA  PTE0
+/* SPI */
+#define PIN_SCK  PTD1
+#define PIN_MISO PTD3
+#define PIN_MOSI PTD2
+#define PIN_CS0  PTD0
+/* Interrupt */
+#define PIN_INT0 PTD5
+#define PIN_INT1 PTA13
+#define PIN_INT2 PTC9  /* This pin does not support interrupt */
+#define PIN_INT3 PTC8  /* This pin does not support interrupt */
+#define PIN_INT4 PTA5
+#define PIN_INT5 PTA4
+/* Analog Input */
+#define PIN_AN0  PTB0
+#define PIN_AN1  PTB1
+#define PIN_AN2  PTB2
+#define PIN_AN3  PTB3
+#define PIN_AN4  PTC2
+#define PIN_AN5  PTC1
+#define BOARD_NAME "FRDM-KL25Z"
+
+#elif defined (TARGET_KL46Z)
+/* I2C */
+#define PIN_SCL  PTE1
+#define PIN_SDA  PTE0
+/* SPI */
+#define PIN_SCK  PTD5
+#define PIN_MISO PTD7
+#define PIN_MOSI PTD6
+#define PIN_CS0  PTD4
+/* Interrupt */
+#define PIN_INT0 PTD2
+#define PIN_INT1 PTA13
+#define PIN_INT2 PTC9  /* This pin does not support interrupt */
+#define PIN_INT3 PTC8  /* This pin does not support interrupt */
+#define PIN_INT4 PTA5
+#define PIN_INT5 PTA4
+/* Analog Input */
+#define PIN_AN0  PTB0
+#define PIN_AN1  PTB1
+#define PIN_AN2  PTB2
+#define PIN_AN3  PTB3
+#define PIN_AN4  PTC2
+#define PIN_AN5  PTC1
+#define BOARD_NAME "FRDM-KL46Z"
+
+#elif defined (TARGET_K64F)
+/* I2C */
+#define PIN_SCL  PTE24
+#define PIN_SDA  PTE25
+/* SPI */
+#define PIN_SCK  PTD1
+#define PIN_MISO PTD3
+#define PIN_MOSI PTD2
+#define PIN_CS0  PTD0
+/* Interrupt */
+#define PIN_INT0 PTC4
+#define PIN_INT1 PTA0
+#define PIN_INT2 PTC3
+#define PIN_INT3 PTC2
+#define PIN_INT4 PTA2
+#define PIN_INT5 PTB23
+/* Analog Input */
+#define PIN_AN0  PTB2
+#define PIN_AN1  PTB3
+#define PIN_AN2  PTB10
+#define PIN_AN3  PTB11
+#define PIN_AN4  PTC11
+#define PIN_AN5  PTC10
+#define BOARD_NAME "FRDM-K64Z"
+
+/**
+ * NOTE: On FRDM-K22F
+ * Both I2C and UART are assigned to 
+ * the same pins PTE1/PTE0.
+ * So MSS does not work as is.
+ */
+#elif defined (TARGET_K22F) 
+/* I2C */
+#define PIN_SCL  PTE1
+#define PIN_SDA  PTE0
+/* SPI */
+#define PIN_SCK  PTD5
+#define PIN_MISO PTD7
+#define PIN_MOSI PTD6
+#define PIN_CS0  PTD4
+/* Interrupt */
+#define PIN_INT0 PTA1
+#define PIN_INT1 PTB19
+#define PIN_INT2 PTC6
+#define PIN_INT3 PTC3
+#define PIN_INT4 PTB18
+#define PIN_INT5 PTA4
+/* Analog Input */
+#define PIN_AN0  PTB0
+#define PIN_AN1  PTB1
+#define PIN_AN2  PTC1
+#define PIN_AN3  PTC2
+#define PIN_AN4  PTB3
+#define PIN_AN5  PTB2
+#define BOARD_NAME "FRDM-K22F"
+
+#elif defined (TARGET_KL05Z)
+/* I2C */
+#define PIN_SCL  PTB3
+#define PIN_SDA  PTB4
+/* SPI */
+#define PIN_SCK  PTB0
+#define PIN_MISO PTA6
+#define PIN_MOSI PTA7
+#define PIN_CS0  PTA5
+/* Interrupt */
+#define PIN_INT0 PTB11
+#define PIN_INT1 PTB10
+#define PIN_INT2 PTB7
+#define PIN_INT3 PTB6
+#define PIN_INT4 PTA12
+#define PIN_INT5 PTA10
+/* Analog Input */
+#define PIN_AN0  PTB8
+#define PIN_AN1  PTB9
+#define PIN_AN2  PTA8
+#define PIN_AN3  PTA0
+#define PIN_AN4  PTA9
+#define PIN_AN5  PTB13
+#define BOARD_NAME "FRDM-KL05Z"
+
+#elif define (TARGET_F411RE)
+/* I2C */
+#define PIN_SCL  PB_8
+#define PIN_SDA  PB_9
+/* SPI */
+#define PIN_SCK  PA_5
+#define PIN_MISO PA_6
+#define PIN_MOSI PA_7
+#define PIN_CS0  PB_6
+/* Interrupt */
+#define PIN_INT0 PC_7
+#define PIN_INT1 PA_9
+#define PIN_INT2 PA_8
+#define PIN_INT3 PB_10
+#define PIN_INT4 PB_4
+#define PIN_INT5 PB_5
+/* Analog In */
+#define PIN_AN0  PA_0
+#define PIN_AN1  PA_1
+#define PIN_AN2  PA_4
+#define PIN_AN3  PB_0
+#define PIN_AN4  PC_1
+#define PIN_AN5  PC_0
+#define BOARD_NAME "NUCLEO-F411RE"
+
+#else
+ #error TARGET NOT DEFINED
+/* I2C */
+#define PIN_SCL  D15
+#define PIN_SDA  D14
+/* SPI */
+#define PIN_SCK  D13
+#define PIN_MISO D12
+#define PIN_MOSI D11
+#define PIN_CS0  D10
+/* Interrupt */
+#define PIN_INT0 D9
+#define PIN_INT1 D8
+#define PIN_INT2 D7
+#define PIN_INT3 D6
+#define PIN_INT4 D5
+#define PIN_INT5 D4
+/* Analog In */
+#define PIN_AN0  A0
+#define PIN_AN1  A1
+#define PIN_AN2  A2
+#define PIN_AN3  A3
+#define PIN_AN4  A4
+#define PIN_AN5  A5
+/* MSS on board LEDs */
+#define LED_D1   D13
+#define LED_D2   D12
+#define LED_D3   D11
+#define LED_D4   D10
+#define LED_D5   D3
+#define LED_D6   D2
+#define LED_D7   D1
+#define LED_D8   D0
+
+#endif
+
+#endif /* _MSS_H_ */
\ No newline at end of file