Central Applications - Mbed Code repo
Debug demo for the MAX30003WING
Dependencies: MAX30003 max32630fthr
Fork of
MAX30003_Demo_Debug
by 
Corey Harris
Diff: main.cpp
- Revision:
- 1:86843c27cc81
- Parent:
- 0:38c49bc37c7c
- Child:
- 2:812d40f1853d
--- a/main.cpp Wed Aug 16 22:59:59 2017 +0000
+++ b/main.cpp Thu Aug 17 19:56:40 2017 +0000
@@ -16,48 +16,55 @@
int main()
{
- DigitalOut rLed(LED1, LED_OFF);
+ Serial pc(USBTX, USBRX); // Use USB debug probe for serial link
+ pc.baud(115200); // Baud rate = 115200
+
+ DigitalOut rLed(LED1, LED_OFF); // Debug LEDs
DigitalOut gLed(LED2, LED_OFF);
DigitalOut bLed(LED3, LED_OFF);
- Serial pc(USBTX, USBRX);
- pc.baud(115200);
+ InterruptIn ecgFIFO_int(P5_4); // Config P5_4 as int. in for the
+ ecgFIFO_int.fall(&ecgFIFO_callback); // ecg FIFO almost full interrupt
- pc.printf("Running.... \r\n\r\n");
- wait(0.5);
-
- SPI spiBus(SPI2_MOSI, SPI2_MISO, SPI2_SCK);
+ SPI spiBus(SPI2_MOSI, SPI2_MISO, SPI2_SCK); // SPI bus, P5_1 = MOSI,
+ // P5_2 = MISO, P5_0 = SCK
MAX30003 *ecgAFE;
- ecgAFE = new MAX30003(spiBus, P5_3);
- ecg_config(*ecgAFE);
+ ecgAFE = new MAX30003(spiBus, P5_3); // New MAX30003 on spiBus, CS = P5_3
+ ecg_config(*ecgAFE); // Config ECG
+
- /* Peripehral configuration */
- InterruptIn ecgFIFO_int(P5_4); // Config P5_4 as int. in for the ecg FIFO almost full interrupt
- ecgFIFO_int.fall(&ecgFIFO_callback); //
+ ecgAFE->writeRegister( MAX30003::SYNCH , 0);
- pc.printf("Config. complete.... \r\n\r\n");
- wait(0.5);
-
- uint32_t ecgFIFO[32];
- int16_t ecgSample, ETAG;
- while(1)
- {
+ uint32_t ecgFIFO, readSamples, idx, ETAG[32];
+ int16_t ecgSample[32];
+ while(1) {
+
+ bLed = LED_ON;
+
/* Read back ECG samples from the FIFO */
if( ecgFIFOIntFlag ) {
-
- for( int i = 0; i < 16; i++ ){
- ecgFIFO[i] = ecgAFE->readRegister( MAX30003::ECG_FIFO );
- ecgSample = ecgFIFO[i] >> 8;
- ETAG = ( ecgFIFO[i] >> 3 ) && 0x07;
-
- pc.printf("Sample : %5d, \t ETAG : 0x%x \r\n", ecgSample, ETAG);
+ pc.printf("Interrupt received....\r\n\r\n");
+ bLed = LED_OFF;
+ ecgFIFOIntFlag = 0; // Clear interrupt flag
+ readSamples = 0; // Reset sample counter
+ do {
+ ecgFIFO = ecgAFE->readRegister( MAX30003::ECG_FIFO ); // Read FIFO
+ ecgSample[readSamples] = ecgFIFO >> 8; // Isolate voltage data
+ ETAG[readSamples] = ( ecgFIFO >> 3 ) & 0b111; // Isolate ETAG
+ readSamples++; // Increment sample counter
+ } while ( ETAG[readSamples-1] == 0x0 || ETAG[readSamples-1] == 0x1 ); // Check that sample is valid
+
+ pc.printf("%d samples read from FIFO \r\n", readSamples);
+
+ for( idx = 0; idx < readSamples; idx++ ) {
+ pc.printf("Sample : %6d, \tETAG : 0x%x\r\n", ecgSample[idx], ETAG[idx]);
}
-
- bLed = !bLed;
- ecgFIFOIntFlag = 0;
-
+
+ pc.printf("\r\n\r\n\r\n");
+
}
+
}
}
@@ -66,70 +73,62 @@
void ecg_config(MAX30003& ecgAFE) {
- // Reset ECG to clear registers
- ecgAFE.writeRegister( MAX30003::SW_RST , 0);
-
-
-
- // General config register setting
- MAX30003::GeneralConfiguration_u CNFG_GEN_r;
- CNFG_GEN_r.bits.en_ecg = 1;
- CNFG_GEN_r.bits.rbiasn = 1;
- CNFG_GEN_r.bits.rbiasp = 1;
- CNFG_GEN_r.bits.en_rbias = 1;
- CNFG_GEN_r.bits.imag = 2;
- CNFG_GEN_r.bits.en_dcloff = 1;
- ecgAFE.writeRegister( MAX30003::CNFG_GEN , CNFG_GEN_r.all);
-
-
-
- // ECG Config register setting
- MAX30003::ECGConfiguration_u CNFG_ECG_r;
- CNFG_ECG_r.bits.dlpf = 1;
- CNFG_ECG_r.bits.dhpf = 1;
- CNFG_ECG_r.bits.gain = 3;
- CNFG_ECG_r.bits.rate = 3;
- ecgAFE.writeRegister( MAX30003::CNFG_ECG , CNFG_ECG_r.all);
+ // Reset ECG to clear registers
+ ecgAFE.writeRegister( MAX30003::SW_RST , 0);
- //R-to-R configuration
- MAX30003::RtoR1Configuration_u CNFG_RTOR_r;
- CNFG_RTOR_r.bits.en_rtor = 1;
- ecgAFE.writeRegister( MAX30003::CNFG_RTOR1 , CNFG_RTOR_r.all);
+ // General config register setting
+ MAX30003::GeneralConfiguration_u CNFG_GEN_r;
+ CNFG_GEN_r.bits.en_ecg = 1;
+ CNFG_GEN_r.bits.rbiasn = 1;
+ CNFG_GEN_r.bits.rbiasp = 1;
+ CNFG_GEN_r.bits.en_rbias = 1;
+ CNFG_GEN_r.bits.imag = 2;
+ CNFG_GEN_r.bits.en_dcloff = 1;
+ ecgAFE.writeRegister( MAX30003::CNFG_GEN , CNFG_GEN_r.all);
+
+
+ // ECG Config register setting
+ MAX30003::ECGConfiguration_u CNFG_ECG_r;
+ CNFG_ECG_r.bits.dlpf = 1;
+ CNFG_ECG_r.bits.dhpf = 1;
+ CNFG_ECG_r.bits.gain = 3;
+ CNFG_ECG_r.bits.rate = 3;
+ ecgAFE.writeRegister( MAX30003::CNFG_ECG , CNFG_ECG_r.all);
+
+
+ //R-to-R configuration
+ MAX30003::RtoR1Configuration_u CNFG_RTOR_r;
+ CNFG_RTOR_r.bits.en_rtor = 1;
+ ecgAFE.writeRegister( MAX30003::CNFG_RTOR1 , CNFG_RTOR_r.all);
+
+
+ //Manage interrupts register setting
+ MAX30003::ManageInterrupts_u MNG_INT_r;
+ MNG_INT_r.bits.efit = 0b00011;
+ ecgAFE.writeRegister( MAX30003::MNGR_INT , MNG_INT_r.all);
-
- // Manage interrupts register setting
- MAX30003::ManageInterrupts_u MNG_INT_r;
- MNG_INT_r.bits.efit = 0b01111;
- ecgAFE.writeRegister( MAX30003::MNGR_INT , MNG_INT_r.all);
-
-
-
- // Enable interrupts register setting
- MAX30003::EnableInterrupts_u EN_INT_r;
- EN_INT_r.all = 0;
- EN_INT_r.bits.en_eint = 1;
- EN_INT_r.bits.intb_type = 0b11;
- ecgAFE.writeRegister( MAX30003::EN_INT , EN_INT_r.all);
-
+ //Enable interrupts register setting
+ MAX30003::EnableInterrupts_u EN_INT_r;
+ EN_INT_r.all = 0;
+ EN_INT_r.bits.en_eint = 1;
+ EN_INT_r.bits.intb_type = 0b11;
+ ecgAFE.writeRegister( MAX30003::EN_INT , EN_INT_r.all);
+
+
+ //Dyanmic modes config
+ MAX30003::ManageDynamicModes_u MNG_DYN_r;
+ MNG_DYN_r.bits.fast = 0;
+ ecgAFE.writeRegister( MAX30003::MNGR_DYN , MNG_DYN_r.all);
+
-
- // Dyanmic modes config
- MAX30003::ManageDynamicModes_u MNG_DYN_r;
- MNG_DYN_r.bits.fast = 0;
- ecgAFE.writeRegister( MAX30003::MNGR_DYN , MNG_DYN_r.all);
-
-
+ //MUX Config
+ MAX30003::MuxConfiguration_u CNFG_MUX_r;
+ CNFG_MUX_r.bits.pol = 0;
+ ecgAFE.writeRegister( MAX30003::CNFG_EMUX , CNFG_MUX_r.all);
- // MUX Config
- MAX30003::MuxConfiguration_u CNFG_MUX_r;
- CNFG_MUX_r.bits.pol = 0;
- ecgAFE.writeRegister( MAX30003::CNFG_EMUX , CNFG_MUX_r.all);
-
-
- ecgAFE.writeRegister( MAX30003::SYNCH , 0);
-
+ return;
}