![](/media/cache/group/9e3cc099b3b04bca937a1cca1da81b19.jpg.50x50_q85.jpg)
De hele robot in 1 keer bam
Dependencies: mbed QEI Servo HIDScope biquadFilter MODSERIAL FastPWM
main.cpp
- Committer:
- Jellehierck
- Date:
- 2019-10-21
- Revision:
- 7:7a088536f1c9
- Parent:
- 6:5437cc97e1e6
- Child:
- 8:ea3de43c9e8b
File content as of revision 7:7a088536f1c9:
//c++ script for filtering of measured EMG signals #include "mbed.h" //Base library #include "HIDScope.h" // to see if program is working and EMG is filtered properly // #include "QEI.h"// is needed for the encoder // #include "MODSERIAL.h"// in order for connection with the pc #include "BiQuad.h" // #include "FastPWM.h" // #include "Arduino.h" //misschien handig omdat we het EMG arduino board gebruiken (?) // #include "EMGFilters.h" #include <vector> // For easy array management #include <numeric> // For manipulating array data // PC serial connection HIDScope scope( 2 ); // MODSERIAL pc(USBTX, USBRX); //EMG inputs definieren AnalogIn emg1_in (A1); //emg van rechterbicep, voor de x-richting AnalogIn emg2_in (A2); //emg van linkerbicep, voor de y-richting AnalogIn emg3_in (A3); //emg van een derde (nog te bepalen) spier, voor het vernaderen van de richting // LED DigitalOut led_g(LED_GREEN); DigitalOut led_r(LED_RED); //variablen voor EMG double emg1; double emg2; double emg3; vector<double> emg1_cal; int i_cal; // Initialize tickers Ticker tickSample; Timeout timeoutCalibrationMVC; Ticker tickSampleCalibration; // Sample rate const double Fs = 500; //Hz const double Ts = 1/Fs; //sec // Notch filter coefficients (iirnotch Q factor 35 @50Hz) from MATLAB in the following form: // b01 b11 b21 a01 a11 a21 BiQuad bq_notch(0.995636295063941, -1.89829218816065, 0.995636295063941, 1, -1.89829218816065, 0.991272590127882); // Highpass filter coefficients (butter 4th order @10Hz cutoff) from MATLAB in the following form: // b01 b11 b21 a01 a11 a21 // b02 b12 b22 a02 a12 a22 BiQuad bq_H1(0.922946103200875, -1.84589220640175, 0.922946103200875, 1, -1.88920703055163, 0.892769008131025); BiQuad bq_H2(1, -2, 1, 1, -1.95046575793011, 0.954143234875078); BiQuadChain bqc_notch_high; // Used to chain two 2nd other filters into a 4th order filter // Lowpass filter coefficients (butter 4th order @5Hz cutoff) from MATLAB in the following form: // b01 b11 b21 a01 a11 a21 // b02 b12 b22 a02 a12 a22 BiQuad bq_L1(5.32116245737504e-08, 1.06423249147501e-07, 5.32116245737504e-08, 1, -1.94396715039462, 0.944882378004138); BiQuad bq_L2(1, 2, 1, 1, -1.97586467534468, 0.976794920438162); BiQuadChain bqc_low; // Used to chain two 2nd other filters into a 4th order filter double stdev(const vector<double> &vect) { } // Check if filters are stable bool checkBQChainStable() { bool n_hp_stable = bqc_notch_high.stable(); bool l_stable = bqc_low.stable(); if (n_hp_stable && l_stable) { return true; } else { return false; } } // Read samples, filter samples and output to HIDScope void sample() { // Read EMG inputs emg1 = emg1_in.read(); emg2 = emg2_in.read(); emg3 = emg3_in.read(); // Output raw EMG input scope.set(0, emg1 ); // Filter notch and highpass double emg1_n_hp = bqc_notch_high.step( emg1 ); // Rectify double emg1_rectify = fabs( emg1_n_hp ); // Filter lowpass (completes envelope) double emg1_env = bqc_low.step( emg1_rectify ); // Output EMG after filters scope.set(1, emg1_env ); scope.send(); } void sampleCalibration() { // Read EMG inputs emg1 = emg1_in.read(); emg2 = emg2_in.read(); emg3 = emg3_in.read(); // Output raw EMG input scope.set(0, emg1 ); double emg1_n_hp = bqc_notch_high.step( emg1 ); // Filter notch and highpass double emg1_rectify = fabs( emg1_n_hp ); // Filter lowpass (completes envelope) double emg1_env = bqc_low.step( emg1_rectify ); // Filter lowpass (completes envelope) // Output EMG after filters scope.set(1, emg1_env ); scope.send(); emg1_cal.push_back(emg1_env); } void calibrationMVCFinished() { tickSampleCalibration.detach(); } void calibrationMVC() { timeoutCalibrationMVC.attach( &calibrationMVCFinished, 10.0f); tickSampleCalibration.attach( &sampleCalibration, Ts ); } void main() { // Initialize sample ticker tickSample.attach(&sample, Ts); // Create BQ chains to reduce computations bqc_notch_high.add( &bq_notch ).add( &bq_H1 ).add( &bq_H2 ); bqc_low.add( &bq_L1 ).add( &bq_L2 ); // If any filter chain is unstable, red led will light up if (checkBQChainStable) { led_r = 1; // LED off } else { led_r = 0; // LED on } while(true) { // Show that system is running led_g = !led_g; wait(0.5); } }