Diff: inc/drivers/MicroBitPin.h

Revision:

49:88f03f3feff1

Parent:

45:23b71960fe6c

Child:

53:ee44932401cb

diff -r 34d1adb6771c -r 88f03f3feff1 inc/drivers/MicroBitPin.h
--- a/inc/drivers/MicroBitPin.h	Wed Jul 13 12:18:27 2016 +0100
+++ b/inc/drivers/MicroBitPin.h	Wed Jul 13 12:18:28 2016 +0100
@@ -35,7 +35,8 @@
 #define IO_STATUS_ANALOG_IN                 0x04        // Pin is Analog in
 #define IO_STATUS_ANALOG_OUT                0x08        // Pin is Analog out
 #define IO_STATUS_TOUCH_IN                  0x10        // Pin is a makey-makey style touch sensor
-#define IO_STATUS_EVENTBUS_ENABLED          0x80        // Pin is will generate events on change
+#define IO_STATUS_EVENT_ON_EDGE             0x20        // Pin will generate events on pin change
+#define IO_STATUS_EVENT_PULSE_ON_EDGE       0x40        // Pin will generate events on pin change
 
 //#defines for each edge connector pin
 #define MICROBIT_PIN_P0                     P0_3        //P0 is the left most pad (ANALOG/DIGITAL) used to be P0_3 on green board
@@ -64,6 +65,15 @@
 #define MICROBIT_PIN_DEFAULT_SERVO_RANGE    2000
 #define MICROBIT_PIN_DEFAULT_SERVO_CENTER   1500
 
+#define MICROBIT_PIN_EVENT_NONE             0
+#define MICROBIT_PIN_EVENT_ON_EDGE          1
+#define MICROBIT_PIN_EVENT_ON_PULSE         2
+#define MICROBIT_PIN_EVENT_ON_TOUCH         3
+
+#define MICROBIT_PIN_EVT_RISE               2
+#define MICROBIT_PIN_EVT_FALL               3
+#define MICROBIT_PIN_EVT_PULSE_HI           4
+#define MICROBIT_PIN_EVT_PULSE_LO           5
 
 /**
   * Pin capabilities enum.
@@ -101,6 +111,43 @@
       */
     int obtainAnalogChannel();
 
+    /**
+      * Interrupt handler for when an rise interrupt is triggered.
+      */
+    void onRise();
+
+    /**
+      * Interrupt handler for when an fall interrupt is triggered.
+      */
+    void onFall();
+
+    /**
+      * This member function manages the calculation of the timestamp of a pulse detected
+      * on a pin whilst in IO_STATUS_EVENT_PULSE_ON_EDGE or IO_STATUS_EVENT_ON_EDGE modes.
+      *
+      * @param eventValue the event value to distribute onto the message bus.
+      */
+    void pulseWidthEvent(int eventValue);
+
+    /**
+      * This member function will construct an TimedInterruptIn instance, and configure
+      * interrupts for rise and fall.
+      *
+      * @param eventType the specific mode used in interrupt context to determine how an
+      *                  edge/rise is processed.
+      *
+      * @return MICROBIT_OK on success
+      */
+    int enableRiseFallEvents(int eventType);
+
+    /**
+      * If this pin is in a mode where the pin is generating events, it will destruct
+      * the current instance attached to this MicroBitPin instance.
+      *
+      * @return MICROBIT_OK on success.
+      */
+    int disableEvents();
+
     public:
 
     // mbed PinName of this pin.
@@ -141,8 +188,9 @@
     /**
       * Configures this IO pin as a digital input (if necessary) and tests its current value.
       *
+      *
       * @return 1 if this input is high, 0 if input is LO, or MICROBIT_NOT_SUPPORTED
-      *         if the given pin does not have analog capability.
+      *         if the given pin does not have digital capability.
       *
       * @code
       * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH);
@@ -290,6 +338,47 @@
       *         given pin is not configured as an analog output.
       */
     int getAnalogPeriod();
+
+    /**
+      * Configures the pull of this pin.
+      *
+      * @param pull one of the mbed pull configurations: PullUp, PullDown, PullNone, OpenDrain
+      *
+      * @return MICROBIT_NOT_SUPPORTED if the current pin configuration is anything other
+      *         than a digital input, otherwise MICROBIT_OK.
+      */
+    int setPull(PinMode pull);
+
+    /**
+      * Configures the events generated by this MicroBitPin instance.
+      *
+      * MICROBIT_PIN_EVENT_ON_EDGE - Configures this pin to a digital input, and generates events whenever a rise/fall is detected on this pin. (MICROBIT_PIN_EVT_RISE, MICROBIT_PIN_EVT_FALL)
+      * MICROBIT_PIN_EVENT_ON_PULSE - Configures this pin to a digital input, and generates events where the timestamp is the duration that this pin was either HI or LO. (MICROBIT_PIN_EVT_PULSE_HI, MICROBIT_PIN_EVT_PULSE_LO)
+      * MICROBIT_PIN_EVENT_ON_TOUCH - Configures this pin as a makey makey style touch sensor, in the form of a MicroBitButton. Normal button events will be generated using the ID of this pin.
+      * MICROBIT_PIN_EVENT_NONE - Disables events for this pin.
+      *
+      * @param eventType One of: MICROBIT_PIN_EVENT_ON_EDGE, MICROBIT_PIN_EVENT_ON_PULSE, MICROBIT_PIN_EVENT_ON_TOUCH, MICROBIT_PIN_EVENT_NONE
+      *
+      * @code
+      * MicroBitMessageBus bus;
+      *
+      * MicroBitPin P0(MICROBIT_ID_IO_P0, MICROBIT_PIN_P0, PIN_CAPABILITY_BOTH);
+      * P0.eventOn(MICROBIT_PIN_EVENT_ON_PULSE);
+      *
+      * void onPulse(MicroBitEvent evt)
+      * {
+      *     int duration = evt.timestamp;
+      * }
+      *
+      * bus.listen(MICROBIT_ID_IO_P0, MICROBIT_PIN_EVT_PULSE_HI, onPulse, MESSAGE_BUS_LISTENER_IMMEDIATE)
+      * @endcode
+      *
+      * @return MICROBIT_OK on success, or MICROBIT_INVALID_PARAMETER if the given eventype does not match
+      *
+      * @note In the MICROBIT_PIN_EVENT_ON_PULSE mode, the smallest pulse that was reliably detected was 85us, around 5khz. If more precision is required,
+      *       please use the InterruptIn class supplied by ARM mbed.
+      */
+    int eventOn(int eventType);
 };
 
 #endif
\ No newline at end of file