I2C hang recover function added
Dependencies: UniGraphic mbed vt100
In this version, check_i2c_pins function was added in edge_mgr.cpp.
プログラムの起動時、I2Cモジュールを初期化する前に、I2Cに使用するピンの電位を確認し
もし一方でも Low に張り付いていた場合、SCL を GPIO 出力に設定して
所定回数 (I2C_UNLOCK_TRIAL_CYCLE) 反転させることにより、疑似リセットクロックを生成します。
その後は、通常の起動手順に復帰し、以降はこれまでと同様の動作をします。
Diff: afLib/Command.cpp
- Revision:
- 0:d895cd1cd897
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/afLib/Command.cpp Tue Apr 03 08:30:29 2018 +0000 @@ -0,0 +1,269 @@ +/** + * Copyright 2015 Afero, Inc. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +//wsugi #include "Arduino.h" +#include "mbed.h" +#include <stdio.h> +#include "Command.h" +#include "msg_types.h" + +#define SERIAL_PRINT_DBG_ASR_ON 0 + +#define CMD_HDR_LEN 4 // 4 byte header on all commands +#define CMD_VAL_LEN 2 // 2 byte value length for commands that have a value + +const char *CMD_NAMES[] = {"SET ", "GET ", "UPDATE"}; + + +Command::Command(uint16_t len, uint8_t *bytes) { + int index = 0; + + _cmd = bytes[index++]; + _requestId = bytes[index++]; + _attrId = bytes[index + 0] | bytes[index + 1] << 8; + index += 2; + + if (_cmd == MSG_TYPE_GET) { + return; + } + if (_cmd == MSG_TYPE_UPDATE) { + _status = bytes[index++]; + _reason = bytes[index++]; + } + + _valueLen = bytes[index + 0] | bytes[index + 1] << 8; + index += 2; + _value = new uint8_t[_valueLen]; + for (int i = 0; i < _valueLen; i++) { + _value[i] = bytes[index + i]; + } +} + +Command::Command(uint8_t requestId, const char *str) { + _requestId = requestId & 0xff; + + char *cp; //wsugi = strdup(str); +//wsugi 00 start + { + int length = strlen(str)+1; + cp = (char*)malloc(length); + strcpy(cp,str); + } +//wsugi 00 end + char *tok = strtok(cp, " "); + _cmd = strToCmd(tok); + + tok = strtok(NULL, " "); + _attrId = strToAttrId(tok); + + if (_cmd == MSG_TYPE_GET) { + _valueLen = 0; + _value = NULL; + } else { + tok = strtok(NULL, " "); + _valueLen = strlen(tok) / 2; + _value = new uint8_t[_valueLen]; + strToValue(tok, _value); + } + + free(cp); +} + +Command::Command(uint8_t requestId, uint8_t cmd, uint16_t attrId) { + _requestId = requestId; + _cmd = cmd; + _attrId = attrId; + _valueLen = 0; + _value = NULL; +} + +Command::Command(uint8_t requestId, uint8_t cmd, uint16_t attrId, uint16_t valueLen, uint8_t *value) { + _requestId = requestId; + _cmd = cmd; + _attrId = attrId; + _valueLen = valueLen; + _value = new uint8_t[_valueLen]; + memcpy(_value, value, valueLen); +} + +Command::Command(uint8_t requestId, uint8_t cmd, uint16_t attrId, uint8_t status, uint8_t reason, uint16_t valueLen, + uint8_t *value) { + _requestId = requestId; + _cmd = cmd; + _attrId = attrId; + _status = status; + _reason = reason; + _valueLen = valueLen; + _value = new uint8_t[_valueLen]; + memcpy(_value, value, valueLen); +} + +Command::Command() { +} + +Command::~Command() { + if (_value != NULL) { + delete[] _value; //wsugi delete (_value); + } +} + +int Command::strToValue(char *valueStr, uint8_t *value) { + for (int i = 0; i < (int) (strlen(valueStr) / 2); i++) { + int j = i * 2; + value[i] = getVal(valueStr[j + 1]) + (getVal(valueStr[j]) << 4); + } + + return 0; +} + +uint16_t Command::strToAttrId(char *attrIdStr) { + return atoi(attrIdStr); + //return String(attrIdStr).toInt(); +} + +uint8_t Command::strToCmd(char *cmdStr) { + char c = cmdStr[0]; + if (c == 'g' || c == 'G') { + return MSG_TYPE_GET; + } else if (c == 's' || c == 'S') { + return MSG_TYPE_SET; + } else if (c == 'u' || c == 'U') { + return MSG_TYPE_UPDATE; + } + + return 0xFF ; +} + +uint8_t Command::getCommand() { + return _cmd; +} + +uint8_t Command::getReqId() { + return _requestId; +} + +uint16_t Command::getAttrId() { + return _attrId; +} + +uint16_t Command::getValueLen() { + return _valueLen; +} + +void Command::getValue(uint8_t *value) { + for (int i = 0; i < _valueLen; i++) { + value[i] = _value[i]; + } +} + +uint8_t *Command::getValueP() { + return _value; +} + +uint16_t Command::getSize() { + uint16_t len = CMD_HDR_LEN; + + if (_cmd != MSG_TYPE_GET) { + len += CMD_VAL_LEN + _valueLen; + } + + if (_cmd == MSG_TYPE_UPDATE) { + len += 2; // status byte + reason byte + } + + return len; +} + +uint16_t Command::getBytes(uint8_t *bytes) { + uint16_t len = getSize(); + + int index = 0; + + bytes[index++] = (_cmd); + + bytes[index++] = (_requestId); + + bytes[index++] = (_attrId & 0xff); + bytes[index++] = ((_attrId >> 8) & 0xff); + + if (_cmd == MSG_TYPE_GET) { + return len; + } + + if (_cmd == MSG_TYPE_UPDATE) { + bytes[index++] = (_status); + bytes[index++] = (_reason); + } + + bytes[index++] = (_valueLen & 0xff); + bytes[index++] = ((_valueLen >> 8) & 0xff); + + for (int i = 0; i < _valueLen; i++) { + bytes[index++] = (_value[i]); + } + + return len; +} + +bool Command::isValid() { + return (_cmd == MSG_TYPE_SET) || (_cmd == MSG_TYPE_GET) || (_cmd == MSG_TYPE_UPDATE); +} + +void Command::dumpBytes() { +#if SERIAL_PRINT_DBG_ASR_ON + uint16_t len = getSize(); + uint8_t bytes[len]; + getBytes(bytes); + + _printBuf[0] = 0; + sprintf(_printBuf, "len: %d value: ", len); + for (int i = 0; i < len; i++) { + int b = bytes[i] & 0xff; + sprintf(&_printBuf[strlen(_printBuf)], "%02x", b); + } + printf("%s\n",_printBuf); +#endif +} + +void Command::dump() { +#if SERIAL_PRINT_DBG_ASR_ON + _printBuf[0] = 0; + sprintf(_printBuf, "cmd: %s attr: %d value: ", + CMD_NAMES[_cmd - MESSAGE_CHANNEL_BASE - 1], + _attrId + ); + if (_cmd != MSG_TYPE_GET) { + for (int i = 0; i < _valueLen; i++) { + int b = _value[i] & 0xff; + sprintf(&_printBuf[strlen(_printBuf)], "%02x", b); + } + } + printf("%s\n",_printBuf); +#endif +} + +uint8_t Command::getVal(char c) { + if (c >= '0' && c <= '9') + return (uint8_t)(c - '0'); + else if (c >= 'A' && c <= 'F') + return (uint8_t)(c - 'A' + 10); + else if (c >= 'a' && c <= 'f') + return (uint8_t)(c - 'a' + 10); + + printf("bad hex char: %c\n",c); + + return 0; +}