La Suno
Release candidate version. The pointer in GAS Pressure display is changed to a triangle.
Dependencies: UniGraphic mbed vt100
Please note, at 2-Mar-2018 the current version of mbed-lib has a defect in Ticker.
https://os.mbed.com/forum/bugs-suggestions/topic/29287/
So, mbed lib version 157 is intentionally being used.
Please do not update mbed library until the problem in the above URL is fixed.
In this version, format of GAS Pressure Display has been changed.
moto
af_utils/af_attributes.h
- Committer:
- Rhyme
- Date:
- 2018-03-02
- Revision:
- 0:774324cbc5a6
File content as of revision 0:774324cbc5a6:
#ifndef _AF_ATTRIBUTES_H_
#define _AF_ATTRIBUTES_H_
#include "mbed.h"
#include "afLib.h"
/**
* af_attributes.h
*
*/
#define ATTRIBUTE_TYPE_SINT8 2
#define ATTRIBUTE_TYPE_SINT16 3
#define ATTRIBUTE_TYPE_SINT32 4
#define ATTRIBUTE_TYPE_SINT64 5
#define ATTRIBUTE_TYPE_BOOLEAN 1
#define ATTRIBUTE_TYPE_UTF8S 20
#define ATTRIBUTE_TYPE_BYTES 21
#define ATTRIBUTE_TYPE_FIXED_15_16 6
#define afSUCCESS 0 // Operation completed successfully
#define afERROR_NO_SUCH_ATTRIBUTE -1 // Request was made for unknown attribute id
#define afERROR_BUSY -2 // Request already in progress, try again
#define afERROR_INVALID_COMMAND -3 // Command could not be parsed
#define afERROR_QUEUE_OVERFLOW -4 // Queue is full
#define afERROR_QUEUE_UNDERFLOW -5 // Queue is empty
#define afERROR_INVALID_PARAM -6 // Bad input parameter
#define AF_SYSTEM_COMMAND 65012
#define AF_SYSTEM_ASR_STATE 65013
#define AF_SYSTEM_LINKED_TIMESTAMP 65015
#define MODULE_STATE_REBOOTED 0
#define MODULE_STATE_LINKED 1
#define MODULE_STATE_UPDATING 2
#define MOUDLE_STATE_UPDATE_READY 3
#define MODULE_COMMAND_NONE 0
#define MODULE_COMMAND_REBOOT 1
#define ATTR_SENSE_VAL 1
#define ATTR_ACCEL_PRESENT 100
#define ATTR_ACCEL_ENABLE 101
#define ATTR_ACCEL_INTERVAL 102
#define ATTR_ACCEL_VALUE 103
#define ATTR_COLOR0_PRESENT 200
#define ATTR_COLOR0_ENABLE 201
#define ATTR_COLOR0_INTERVAL 202
#define ATTR_COLOR0_TRIGMODE 203
#define ATTR_COLOR0_ITIME 204
#define ATTR_COLOR0_CALIBRATE 205
#define ATTR_COLOR0_PWM_R 206
#define ATTR_COLOR0_PWM_G 207
#define ATTR_COLOR0_PWM_B 208
#define ATTR_COLOR0_PWM_PERIOD 209
#define ATTR_COLOR0_PWM_TARGET 210
#define ATTR_COLOR0_R_VALUE 211
#define ATTR_COLOR0_G_VALUE 212
#define ATTR_COLOR0_B_VALUE 213
#define ATTR_COLOR1_PRESENT 220
#define ATTR_COLOR1_ENABLE 221
#define ATTR_COLOR1_INTERVAL 222
#define ATTR_COLOR1_TRIGMODE 223
#define ATTR_COLOR1_ITIME 224
#define ATTR_COLOR1_CALIBRATE 225
#define ATTR_COLOR1_PWM_R 226
#define ATTR_COLOR1_PWM_G 227
#define ATTR_COLOR1_PWM_B 228
#define ATTR_COLOR1_PWM_PERIOD 229
#define ATTR_COLOR1_PWM_TARGET 230
#define ATTR_COLOR1_R_VALUE 231
#define ATTR_COLOR1_G_VALUE 232
#define ATTR_COLOR1_B_VALUE 233
/* temperature sensor LM75B with color0 */
#define ATTR_TEMP0_PRESENT 300
#define ATTR_TEMP0_ENABLE 301
#define ATTR_TEMP0_INTERVAL 302
#define ATTR_TEMP0_VALUE 303
/* temperature sensor AT502-11 (before) */
#define ATTR_TEMP1_PRESENT 310
#define ATTR_TEMP1_ENABLE 311
#define ATTR_TEMP1_INTERVAL 312
#define ATTR_TEMP1_VALUE 313
/* temperature sensor AT502-11 (after) */
#define ATTR_TEMP2_PRESENT 320
#define ATTR_TEMP2_ENABLE 321
#define ATTR_TEMP2_INTERVAL 322
#define ATTR_TEMP2_VALUE 323
/* temperature sensor LM75B with color1 */
#define ATTR_TEMP3_PRESENT 330
#define ATTR_TEMP3_ENABLE 331
#define ATTR_TEMP3_INTERVAL 332
#define ATTR_TEMP3_VALUE 333
/* gas pressure sensor */
/* gas pressure sensor */
#define ATTR_GAS_PRESENT 400
#define ATTR_GAS_ENABLE 401
#define ATTR_GAS_INTERVAL 402
#define ATTR_GAS_VALUE 403
#define ATTR_GAS_THR_MODE 404
#define ATTR_GAS_THR_HIGH 405
#define ATTR_GAS_THR_LOW 406
/* current trans sensor */
#define ATTR_CURRENT_PRESENT 500
#define ATTR_CURRENT_ENABLE 501
#define ATTR_CURRENT_INTERVAL 502
#define ATTR_CURRENT_VALUE 503
#define ATTR_SOFTWARE_RESET 666
#define ATTR_DISPLAY_MODE 777
#define ATTR_MCU_RESET_REASON 999
#define ATTR_LED 1024
#define ATTR_IO0 1025
#define ATTR_IO1 1026
#define ATTR_IO2 1028
#define ATTR_BUTTON 1030
#define ATTR_IO3 1031
#define ATTR_BOOT_LOADER_VER 2001
#define ATTR_BLE_STACK_VER 2002
#define ATTR_FW_APP_VER 2003
#define ATTR_DEVICE_DESC 2004
#define ATTR_WIFI_VER 2006
#define ATTR_OFFLINE_SCHED 59001
#define ATTR_SECURITY_ENABLED 60000
#define ATTR_UTC_OFFSET 65001
#define ATTR_CONFIGURES_SSID 65004
#define ATTR_WIFI_BARS 65005
#define ATTR_WIFI_STDY_STATE 65006
#define ATTR_COMMAND 65012
#define ATTR_ASR_STATE 65013
#define ATTR_LOW_BATTERY 65014
#define ATTR_LINKED_TIMESTAMP 65015
#define ATTR_ATTR_ACK 65018
#define ATTR_REBOOT_REASON 65019
#define ATTR_BLE_COMMS 65020
#define ATTR_MCU_INTERFACE 65021
#define DISPLAY_MODE_OFF 0
#define DISPLAY_MODE_GAS 1
#define DISPLAY_MODE_SUMMARY 2
#define DISPLAY_MODE_CHART 3
typedef struct {
uint16_t id ;
char *description ;
int attribute_type ;
int size ;
} af_attribute_type ;
/**
* get_af_attr
* @param id attribute id value to look up
* @returns index of the attribute in the af_attribute_type af_attr[]
*/
int get_af_attr(uint16_t id) ;
/**
* print_af_error
* @param resultCode return value from afLib function(s)
*/
void print_af_error(int resultCode) ;
/**
* Callback that allows ASR to request an MCU attribute be changed.
* You should define this function in your MCU firmware to perform application-specific actions
* your code must take (e.g., updating the state of the hardware),
* in light of the attribute value change.
*/
void attributeChangeRequest(
const uint8_t requestId,
const uint16_t attributeId,
const uint16_t valueLen,
const uint8_t *value
) ;
/*
* Application callback that allows afLib to notify that an attribute has changed.
* This method will be called in response to a getAttribute call from the application
* and whenever a ASR module attribute changes.
*/
void attributeUpdatedReport(
const uint8_t requestId,
const uint16_t attributeId,
const uint16_t valueLen,
const uint8_t *value
) ;
extern afLib *afero ;
#endif /* _AF_ATTRIBUTES_H */