La Suno / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   afero_poc15_180216 afero_poc15_180223 afero_poc15_180302 afero_poc15_180403R ... more

Fork of UniGraphic by GraphicsDisplay

UniGraphic for La Suno Version.
To go with La Suno, WatchDog Reset functions were added in ILI9341.

Diff: Inits/SSD1306.h

Revision:
12:9c8f3076347c
Child:
14:29bab588ba75
diff -r b842b8e332cb -r 9c8f3076347c Inits/SSD1306.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/SSD1306.h	Sun Feb 22 00:05:34 2015 +0000
@@ -0,0 +1,69 @@
+#ifndef MBED_SSD1306_H
+#define MBED_SSD1306_H
+
+
+
+#include "mbed.h"
+#include "LCD.h"
+
+/** Class for UC1608 display controller
+* to be copypasted and adapted for other controllers
+*/
+class SSD1306 : public LCD
+{
+ 
+ public:
+
+    /** Create a PAR display interface
+    * @param displayproto only supports PAR_8
+    * @param port GPIO port name to use
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    SSD1306(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);
+  
+    /** Create an SPI display interface
+    * @param displayproto only supports SPI_8
+    * @param Hz SPI speed in Hz
+    * @param mosi SPI pin
+    * @param miso SPI pin
+    * @param sclk SPI pin
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param name The name used by the parent class to access the interface
+    * @param LCDSIZE_X x size in pixel - optional
+    * @param LCDSIZE_Y y size in pixel - optional
+    */ 
+    SSD1306(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);
+  
+    /** set the contrast of the screen
+      * @note here overrided because of not standard command
+      * @param o contrast 0-63
+      */
+    virtual void set_contrast(int o);
+    
+  
+protected:
+    
+    
+    /** Init command sequence  
+    */
+    void init();
+    
+    /** set mirror mode
+      * @note here overriding the LCD class default one because of not standard commands
+      * @param mode NONE, X, Y, XY 
+      */
+    virtual void mirrorXY(mirror_t mode);
+
+};
+
+
+#endif
\ No newline at end of file