Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   afero_poc15_180216 afero_poc15_180223 afero_poc15_180302 afero_poc15_180403R ... more

Fork of UniGraphic by GraphicsDisplay

UniGraphic for La Suno Version.
To go with La Suno, WatchDog Reset functions were added in ILI9341.

Revision:
4:12ba0ecc2c1f
Child:
9:1749ae993cfe
diff -r 48f3282c2be8 -r 12ba0ecc2c1f Inits/TFT_MIPI.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Inits/TFT_MIPI.h	Sun Feb 15 20:06:07 2015 +0000
@@ -0,0 +1,55 @@
+#ifndef MBED_TFT_MIPI_H
+#define MBED_TFT_MIPI_H
+
+
+
+#include "mbed.h"
+#include "TFT.h"
+
+/** Class for (quite)standard MIPI-DBI TypeB (parallel) and TypeC (spi) TFT display controller
+* for Ilitek ILI9481, Renesas R61581, Raydium RM68042
+* to be copypasted and adapted for other controllers
+*/
+class TFT_MIPI : public TFT
+{
+ 
+ public:
+
+    /** Create a PAR display interface
+    * @param displayproto only supports PAR_8
+    * @param port GPIO port name to use
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param WR pin connected to SDI of display
+    * @param RD pin connected to RS of display
+    * @param name The name used by the parent class to access the interface
+    */ 
+    TFT_MIPI(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name);
+  
+    /** Create an SPI display interface
+    * @param displayproto only supports SPI_8
+    * @param Hz SPI speed in Hz
+    * @param mosi SPI pin
+    * @param miso SPI pin
+    * @param sclk SPI pin
+    * @param CS pin connected to CS of display
+    * @param reset pin connected to RESET of display
+    * @param DC pin connected to data/command of display
+    * @param name The name used by the parent class to access the interface
+    */ 
+    TFT_MIPI(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name);
+  
+
+  
+protected:
+    
+    
+    /** Init command sequence  
+    */
+    void init();
+
+
+
+};
+#endif
\ No newline at end of file