La Suno / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   afero_poc15_180216 afero_poc15_180223 afero_poc15_180302 afero_poc15_180403R ... more

Fork of UniGraphic by GraphicsDisplay

UniGraphic for La Suno Version.
To go with La Suno, WatchDog Reset functions were added in ILI9341.

Inits/SSD1306.h

Committer:
Geremia
Date:
2015-03-02
Revision:
18:ffa58f1a680a
Parent:
15:b9483ba842c8
Child:
19:1bdfb971b2c1

File content as of revision 18:ffa58f1a680a:

#ifndef MBED_SSD1306_H
#define MBED_SSD1306_H

#include "mbed.h"
#include "LCD.h"

/** Class for SSD1306 display controller
* to be copypasted and adapted for other controllers
*/
class SSD1306 : public LCD
{
 
 public:

    /** Create a PAR display interface
    * @param displayproto only supports PAR_8
    * @param port GPIO port name to use
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param WR pin connected to SDI of display
    * @param RD pin connected to RS of display
    * @param name The name used by the parent class to access the interface
    * @param LCDSIZE_X x size in pixel - optional
    * @param LCDSIZE_Y y size in pixel - optional
    */ 
    SSD1306(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);
  
    /** Create an SPI display interface
    * @param displayproto SPI_8 or SPI_16
    * @param Hz SPI speed in Hz
    * @param mosi SPI pin
    * @param miso SPI pin
    * @param sclk SPI pin
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    * @param name The name used by the parent class to access the interface
    * @param LCDSIZE_X x size in pixel - optional
    * @param LCDSIZE_Y y size in pixel - optional
    */ 
    SSD1306(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 128, unsigned  int LCDSIZE_Y = 64);

    /** set the contrast of the screen
      * @note here overrided because of not standard value range
      * @param o contrast 0-255
      */
    virtual void set_contrast(int o);
    
protected:
    
    
    /** Init command sequence  
    */
    void init();
    
    /** set mirror mode
      * @note here overriding the LCD class default one because of not standard commands
      * @param mode NONE, X, Y, XY 
      */
    virtual void mirrorXY(mirror_t mode);

};


#endif