Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   afero_poc15_180216 afero_poc15_180223 afero_poc15_180302 afero_poc15_180403R ... more

Fork of UniGraphic by GraphicsDisplay

UniGraphic for La Suno Version.
To go with La Suno, WatchDog Reset functions were added in ILI9341.

Protocols/SPI8.h

Committer:
Geremia
Date:
2015-02-13
Revision:
1:ff019d22b275
Parent:
0:75ec1b3cde17
Child:
4:12ba0ecc2c1f

File content as of revision 1:ff019d22b275:

#ifndef SPI8_H
#define SPI8_H

#include "mbed.h"
#include "Protocols.h"
//#include "GraphicsDisplay.h"

class SPI8 : public Protocols
{
 public:

    /** Create an SPI 8bit display interface with 3 control pins
    *
    * @param SPI mosi
    * @param SPI miso
    * @param SPI sclk
    * @param CS pin connected to CS of display
    * @param reset pin connected to RESET of display
    * @param DC pin connected to data/command of display
    */ 
    SPI8(int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC);
 
protected:
   
    /** Send 8bit command to display controller 
    *
    * @param cmd: byte to send  
    *
    */   
    virtual void wr_cmd8(unsigned char cmd);
    
    /** Send 8bit data to display controller 
    *
    * @param data: byte to send   
    *
    */   
    virtual void wr_data8(unsigned char data);
    
    /** Send same 8bit data to display controller multiple times
    *
    * @param data: byte to send
    * @param count: how many
    *
    */   
    virtual void wr_data8(unsigned char data, unsigned int count);
    
    /** Send array of data bytes to display controller
    *
    * @param data: unsigned char data array
    * @param lenght: lenght of array
    *
    */   
    virtual void wr_data8buf(unsigned char* data, unsigned int lenght);
    
    /** Send 16bit command to display controller 
    *
    * @param cmd: halfword to send  
    *
    */   
    virtual void wr_cmd16(unsigned short cmd);
    
    /** Send 16bit data to display controller 
    *
    * @param data: halfword to send   
    *
    */   
    virtual void wr_data16(unsigned short data);
    
    /** Send same 16bit data to display controller multiple times
    *
    * @param data: halfword to send
    * @param count: how many
    *
    */   
    virtual void wr_data16(unsigned short data, unsigned int count);
    
    /** Send array of data shorts to display controller
    *
    * @param data: unsigned short data array
    * @param lenght: lenght (in shorts)
    *
    */   
    virtual void wr_data16buf(unsigned short* data, unsigned int lenght);
    
    /** HW reset sequence (without display init commands)   
    */
    virtual void hw_reset();
    
    /** Set ChipSelect high or low
    * @param enable 0/1   
    */
    virtual void BusEnable(bool enable);
  
    DigitalOut _CS;

private:

    SPI _spi;
    DigitalOut _reset;
    DigitalOut _DC;
  
};
#endif