La Suno
Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.
Dependents: afero_poc15_180216 afero_poc15_180223 afero_poc15_180302 afero_poc15_180403R ... more
Fork of
UniGraphic
by 
GraphicsDisplay
UniGraphic for La Suno Version.
To go with La Suno, WatchDog Reset functions were added in ILI9341.
Diff: Protocols/SPI8.cpp
- Revision:
- 20:14daa48ffd4c
- Parent:
- 11:b842b8e332cb
--- a/Protocols/SPI8.cpp Mon Mar 02 10:52:26 2015 +0000
+++ b/Protocols/SPI8.cpp Mon Mar 23 14:08:04 2015 +0000
@@ -18,7 +18,6 @@
#include "SPI8.h"
-//#define USE_CS
SPI8::SPI8(int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC)
: _CS(CS), _spi(mosi, miso, sclk), _reset(reset), _DC(DC)
@@ -27,75 +26,39 @@
_DC=1;
_CS=1;
_spi.format(8,0); // 8 bit spi mode 0
- // _spi.frequency(12000000); // 10 Mhz SPI clock, 12mhz for F411
_spi.frequency(Hz);
hw_reset();
}
void SPI8::wr_cmd8(unsigned char cmd)
-{
-#ifdef USE_CS
- _CS = 0;
-#endif
+{
_DC.write(0); // 0=cmd
_spi.write(cmd); // write 8bit
-#ifdef USE_CS
- _CS = 1;
-#endif
+ _DC.write(1); // 1=data next
}
void SPI8::wr_data8(unsigned char data)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
- _DC.write(1); // 1=data
_spi.write(data); // write 8bit
-#ifdef USE_CS
- _CS = 1;
-#endif
}
void SPI8::wr_cmd16(unsigned short cmd)
-{
-#ifdef USE_CS
- _CS = 0;
-#endif
+{
_DC.write(0); // 0=cmd
_spi.write(cmd>>8); // write 8bit
_spi.write(cmd&0xFF); // write 8bit
-#ifdef USE_CS
- _CS = 1;
-#endif
+ _DC.write(1); // 1=data next
}
void SPI8::wr_data16(unsigned short data)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
- _DC.write(1); // 1=data
_spi.write(data>>8); // write 8bit
_spi.write(data&0xFF); // write 8bit
-#ifdef USE_CS
- _CS = 1;
-#endif
}
void SPI8::wr_gram(unsigned short data)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
- _DC.write(1); // 1=data
_spi.write(data>>8); // write 8bit
_spi.write(data&0xFF); // write 8bit
-#ifdef USE_CS
- _CS = 1;
-#endif
}
void SPI8::wr_gram(unsigned short data, unsigned int count)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
- _DC.write(1); // 1=data
if((data>>8)==(data&0xFF))
{
count<<=1;
@@ -114,16 +77,9 @@
count--;
}
}
-#ifdef USE_CS
- _CS = 1;
-#endif
}
void SPI8::wr_grambuf(unsigned short* data, unsigned int lenght)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
- _DC.write(1); // 1=data
while(lenght)
{
_spi.write((*data)>>8); // write 8bit
@@ -131,17 +87,10 @@
data++;
lenght--;
}
-#ifdef USE_CS
- _CS = 1;
-#endif
}
unsigned short SPI8::rd_gram(bool convert)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
unsigned int r=0;
- _DC.write(1); // 1=data
_spi.write(0); // whole first byte is dummy
r |= _spi.write(0);
r <<= 8;
@@ -155,19 +104,13 @@
r = RGB24to16((r&0xFF0000)>>16, (r&0xFF00)>>8, r&0xFF);// 18bit pixel padded to 24bits, rrrrrr00_gggggg00_bbbbbb00, converted to 16bit
}
_CS = 1; // force CS HIG to interupt the "read state"
-#ifndef USE_CS //if CS is not used, force fixed LOW again
_CS = 0;
-#endif
return (unsigned short)r;
}
unsigned int SPI8::rd_reg_data32(unsigned char reg)
{
-#ifdef USE_CS
- _CS = 0;
-#endif
wr_cmd8(reg);
unsigned int r=0;
- _DC.write(1); // 1=data
r |= _spi.write(0); // we get only 7bit valid, first bit was the dummy cycle
r <<= 8;
@@ -180,9 +123,7 @@
r |= (_spi.write(0) >> 7);
// we clocked 7 more bit so ILI waiting for 8th, we need to reset spi bus
_CS = 1; // force CS HIG to interupt the cmd
-#ifndef USE_CS //if CS is not used, force fixed LOW again
_CS = 0;
-#endif
return r;
}
unsigned int SPI8::rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd)
@@ -193,30 +134,73 @@
wr_cmd8(SPIreadenablecmd); // spi-in enable cmd, 0xD9 (ili9341) or 0xFB (ili9488) or don't know
wr_data8(0xF0|regparam); // in low nibble specify which reg parameter we want
wr_cmd8(reg); // now send cmd (select register we want to read)
- _DC.write(1); // 1=data
r <<= 8;
r |= _spi.write(0);
// r = _spi.write(0) >> 8; for 16bit
}
-_CS = 1; // force CS HIG to interupt the cmd
-#ifndef USE_CS //if CS is not used, force fixed LOW again
+ _CS = 1; // force CS HIG to interupt the cmd
_CS = 0;
-#endif
+ return r;
+}
+// ILI932x specific
+void SPI8::dummyread()
+{
+ _spi.write(0); // dummy read
+}
+// ILI932x specific
+void SPI8::reg_select(unsigned char reg, bool forread)
+{
+ _CS = 1; //fixme: really needed?
+ _CS = 0; //fixme: really needed?
+ _spi.write(0x70);
+ _spi.write(0); // write MSB
+ _spi.write(reg); // write LSB
+ _CS = 1; //fixme: really needed?
+ _CS = 0; //fixme: really needed?
+ if(forread) _spi.write(0x73);
+ else _spi.write(0x72);
+}
+// ILI932x specific
+void SPI8::reg_write(unsigned char reg, unsigned short data)
+{
+ _CS = 1; //fixme: really needed?
+ _CS = 0; //fixme: really needed?
+ _spi.write(0x70);
+ _spi.write(0); // write MSB
+ _spi.write(reg); // write LSB
+ _CS = 1; //fixme: really needed?
+ _CS = 0; //fixme: really needed?
+ _spi.write(0x72);
+ _spi.write(data>>8);
+ _spi.write(data&0xFF);
+}
+// ILI932x specific
+unsigned short SPI8::reg_read(unsigned char reg)
+{
+ unsigned short r=0;
+ _CS = 1; //fixme: really needed?
+ _CS = 0; //fixme: really needed?
+ _spi.write(0x70);
+ _spi.write(0); // write MSB
+ _spi.write(reg); // write LSB
+ _CS = 1; //fixme: really needed?
+ _CS = 0; //fixme: really needed?
+ _spi.write(0x73);
+ _spi.write(0); // dummy read
+ r = _spi.write(0); // read 8bit
+ r <<= 8;
+ r |= _spi.write(0); // read 8bit
return r;
}
void SPI8::hw_reset()
{
wait_ms(15);
_DC = 1;
- // _CS = 1;
- _CS = 0;
+ _CS = 1;
_reset = 0; // display reset
- wait_us(50);
+ wait_ms(2);
_reset = 1; // end reset
- wait_ms(15);
-#ifndef USE_CS
- _CS=0; // put CS low now and forever
-#endif
+ wait_ms(100);
}
void SPI8::BusEnable(bool enable)
{