LSM6DSO accelerometer and gyroscope sensor library
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
LSM6DSOSensor.cpp@4:bcf0cf6e43a7, 2019-09-17 (annotated)
- Committer:
- martlefebvre94
- Date:
- Tue Sep 17 08:40:49 2019 +0000
- Revision:
- 4:bcf0cf6e43a7
- Parent:
- 3:4274d9103f1d
- Child:
- 5:213250c75a9e
Addition of functions for the configuration of the accelerometer and gyroscope sensor
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
cparata | 0:6d69e896ce38 | 1 | /** |
cparata | 0:6d69e896ce38 | 2 | ****************************************************************************** |
cparata | 0:6d69e896ce38 | 3 | * @file LSM6DSOSensor.cpp |
cparata | 0:6d69e896ce38 | 4 | * @author SRA |
cparata | 0:6d69e896ce38 | 5 | * @version V1.0.0 |
cparata | 0:6d69e896ce38 | 6 | * @date February 2019 |
cparata | 0:6d69e896ce38 | 7 | * @brief Implementation of an LSM6DSO Inertial Measurement Unit (IMU) 6 axes |
cparata | 0:6d69e896ce38 | 8 | * sensor. |
cparata | 0:6d69e896ce38 | 9 | ****************************************************************************** |
cparata | 0:6d69e896ce38 | 10 | * @attention |
cparata | 0:6d69e896ce38 | 11 | * |
cparata | 0:6d69e896ce38 | 12 | * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> |
cparata | 0:6d69e896ce38 | 13 | * |
cparata | 0:6d69e896ce38 | 14 | * Redistribution and use in source and binary forms, with or without modification, |
cparata | 0:6d69e896ce38 | 15 | * are permitted provided that the following conditions are met: |
cparata | 0:6d69e896ce38 | 16 | * 1. Redistributions of source code must retain the above copyright notice, |
cparata | 0:6d69e896ce38 | 17 | * this list of conditions and the following disclaimer. |
cparata | 0:6d69e896ce38 | 18 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
cparata | 0:6d69e896ce38 | 19 | * this list of conditions and the following disclaimer in the documentation |
cparata | 0:6d69e896ce38 | 20 | * and/or other materials provided with the distribution. |
cparata | 0:6d69e896ce38 | 21 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
cparata | 0:6d69e896ce38 | 22 | * may be used to endorse or promote products derived from this software |
cparata | 0:6d69e896ce38 | 23 | * without specific prior written permission. |
cparata | 0:6d69e896ce38 | 24 | * |
cparata | 0:6d69e896ce38 | 25 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
cparata | 0:6d69e896ce38 | 26 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
cparata | 0:6d69e896ce38 | 27 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
cparata | 0:6d69e896ce38 | 28 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
cparata | 0:6d69e896ce38 | 29 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
cparata | 0:6d69e896ce38 | 30 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
cparata | 0:6d69e896ce38 | 31 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
cparata | 0:6d69e896ce38 | 32 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
cparata | 0:6d69e896ce38 | 33 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
cparata | 0:6d69e896ce38 | 34 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
cparata | 0:6d69e896ce38 | 35 | * |
cparata | 0:6d69e896ce38 | 36 | ****************************************************************************** |
cparata | 0:6d69e896ce38 | 37 | */ |
cparata | 0:6d69e896ce38 | 38 | |
cparata | 0:6d69e896ce38 | 39 | |
cparata | 0:6d69e896ce38 | 40 | /* Includes ------------------------------------------------------------------*/ |
cparata | 0:6d69e896ce38 | 41 | |
cparata | 0:6d69e896ce38 | 42 | #include "LSM6DSOSensor.h" |
cparata | 0:6d69e896ce38 | 43 | |
cparata | 0:6d69e896ce38 | 44 | |
cparata | 0:6d69e896ce38 | 45 | /* Class Implementation ------------------------------------------------------*/ |
cparata | 0:6d69e896ce38 | 46 | |
cparata | 0:6d69e896ce38 | 47 | /** Constructor |
cparata | 0:6d69e896ce38 | 48 | * @param spi object of an helper class which handles the SPI peripheral |
cparata | 0:6d69e896ce38 | 49 | * @param cs_pin the chip select pin |
cparata | 0:6d69e896ce38 | 50 | * @param int1_pin the interrupt 1 pin |
cparata | 0:6d69e896ce38 | 51 | * @param int2_pin the interrupt 2 pin |
cparata | 0:6d69e896ce38 | 52 | * @param spi_type the SPI type |
cparata | 0:6d69e896ce38 | 53 | */ |
cparata | 0:6d69e896ce38 | 54 | LSM6DSOSensor::LSM6DSOSensor(SPI *spi, PinName cs_pin, PinName int1_pin, PinName int2_pin, SPI_type_t spi_type) : _dev_spi(spi), _cs_pin(cs_pin), _int1_irq(int1_pin), _int2_irq(int2_pin), _spi_type(spi_type) |
cparata | 0:6d69e896ce38 | 55 | { |
cparata | 3:4274d9103f1d | 56 | assert(spi); |
cparata | 3:4274d9103f1d | 57 | if (cs_pin == NC) { |
cparata | 3:4274d9103f1d | 58 | printf("ERROR LSM6DSO CS MUST NOT BE NC\n\r"); |
cparata | 3:4274d9103f1d | 59 | _dev_spi = NULL; |
cparata | 3:4274d9103f1d | 60 | _dev_i2c = NULL; |
cparata | 3:4274d9103f1d | 61 | return; |
cparata | 3:4274d9103f1d | 62 | } |
cparata | 3:4274d9103f1d | 63 | |
cparata | 3:4274d9103f1d | 64 | _reg_ctx.write_reg = LSM6DSO_io_write; |
cparata | 3:4274d9103f1d | 65 | _reg_ctx.read_reg = LSM6DSO_io_read; |
cparata | 3:4274d9103f1d | 66 | _reg_ctx.handle = (void *)this; |
cparata | 3:4274d9103f1d | 67 | _cs_pin = 1; |
cparata | 0:6d69e896ce38 | 68 | _dev_i2c = NULL; |
cparata | 3:4274d9103f1d | 69 | _address = 0; |
cparata | 3:4274d9103f1d | 70 | |
cparata | 3:4274d9103f1d | 71 | if (_spi_type == SPI3W) { |
cparata | 3:4274d9103f1d | 72 | /* Enable SPI 3-Wires on the component */ |
cparata | 3:4274d9103f1d | 73 | uint8_t data = 0x0C; |
cparata | 3:4274d9103f1d | 74 | lsm6dso_write_reg(&_reg_ctx, LSM6DSO_CTRL3_C, &data, 1); |
cparata | 3:4274d9103f1d | 75 | } |
cparata | 0:6d69e896ce38 | 76 | } |
cparata | 0:6d69e896ce38 | 77 | |
cparata | 0:6d69e896ce38 | 78 | |
cparata | 0:6d69e896ce38 | 79 | /** Constructor |
cparata | 0:6d69e896ce38 | 80 | * @param i2c object of an helper class which handles the I2C peripheral |
cparata | 0:6d69e896ce38 | 81 | * @param address the address of the component's instance |
cparata | 0:6d69e896ce38 | 82 | * @param int1_pin the interrupt 1 pin |
cparata | 0:6d69e896ce38 | 83 | * @param int2_pin the interrupt 2 pin |
cparata | 0:6d69e896ce38 | 84 | */ |
cparata | 0:6d69e896ce38 | 85 | LSM6DSOSensor::LSM6DSOSensor(DevI2C *i2c, uint8_t address, PinName int1_pin, PinName int2_pin) : _dev_i2c(i2c), _address(address), _cs_pin(NC), _int1_irq(int1_pin), _int2_irq(int2_pin) |
cparata | 0:6d69e896ce38 | 86 | { |
cparata | 3:4274d9103f1d | 87 | assert(i2c); |
cparata | 3:4274d9103f1d | 88 | _dev_spi = NULL; |
cparata | 3:4274d9103f1d | 89 | _reg_ctx.write_reg = LSM6DSO_io_write; |
cparata | 3:4274d9103f1d | 90 | _reg_ctx.read_reg = LSM6DSO_io_read; |
cparata | 3:4274d9103f1d | 91 | _reg_ctx.handle = (void *)this; |
cparata | 0:6d69e896ce38 | 92 | } |
cparata | 0:6d69e896ce38 | 93 | |
cparata | 0:6d69e896ce38 | 94 | /** |
cparata | 0:6d69e896ce38 | 95 | * @brief Initializing the component |
cparata | 0:6d69e896ce38 | 96 | * @param init pointer to device specific initalization structure |
cparata | 0:6d69e896ce38 | 97 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 98 | */ |
cparata | 0:6d69e896ce38 | 99 | int LSM6DSOSensor::init(void *init) |
cparata | 0:6d69e896ce38 | 100 | { |
cparata | 3:4274d9103f1d | 101 | /* Disable I3C */ |
cparata | 3:4274d9103f1d | 102 | if (lsm6dso_i3c_disable_set(&_reg_ctx, LSM6DSO_I3C_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 103 | return 1; |
cparata | 3:4274d9103f1d | 104 | } |
cparata | 3:4274d9103f1d | 105 | |
cparata | 3:4274d9103f1d | 106 | /* Enable register address automatically incremented during a multiple byte |
cparata | 3:4274d9103f1d | 107 | access with a serial interface. */ |
cparata | 3:4274d9103f1d | 108 | if (lsm6dso_auto_increment_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 109 | return 1; |
cparata | 3:4274d9103f1d | 110 | } |
cparata | 3:4274d9103f1d | 111 | |
cparata | 3:4274d9103f1d | 112 | /* Enable BDU */ |
cparata | 3:4274d9103f1d | 113 | if (lsm6dso_block_data_update_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 114 | return 1; |
cparata | 3:4274d9103f1d | 115 | } |
cparata | 3:4274d9103f1d | 116 | |
cparata | 3:4274d9103f1d | 117 | /* FIFO mode selection */ |
cparata | 3:4274d9103f1d | 118 | if (lsm6dso_fifo_mode_set(&_reg_ctx, LSM6DSO_BYPASS_MODE) != 0) { |
cparata | 3:4274d9103f1d | 119 | return 1; |
cparata | 3:4274d9103f1d | 120 | } |
cparata | 3:4274d9103f1d | 121 | |
cparata | 3:4274d9103f1d | 122 | /* Output data rate selection - power down. */ |
cparata | 3:4274d9103f1d | 123 | if (lsm6dso_xl_data_rate_set(&_reg_ctx, LSM6DSO_XL_ODR_OFF) != 0) { |
cparata | 3:4274d9103f1d | 124 | return 1; |
cparata | 3:4274d9103f1d | 125 | } |
cparata | 3:4274d9103f1d | 126 | |
cparata | 3:4274d9103f1d | 127 | /* Full scale selection. */ |
cparata | 3:4274d9103f1d | 128 | if (lsm6dso_xl_full_scale_set(&_reg_ctx, LSM6DSO_2g) != 0) { |
cparata | 3:4274d9103f1d | 129 | return 1; |
cparata | 3:4274d9103f1d | 130 | } |
cparata | 3:4274d9103f1d | 131 | |
cparata | 3:4274d9103f1d | 132 | /* Output data rate selection - power down. */ |
cparata | 3:4274d9103f1d | 133 | if (lsm6dso_gy_data_rate_set(&_reg_ctx, LSM6DSO_GY_ODR_OFF) != 0) { |
cparata | 3:4274d9103f1d | 134 | return 1; |
cparata | 3:4274d9103f1d | 135 | } |
cparata | 3:4274d9103f1d | 136 | |
cparata | 3:4274d9103f1d | 137 | /* Full scale selection. */ |
cparata | 3:4274d9103f1d | 138 | if (lsm6dso_gy_full_scale_set(&_reg_ctx, LSM6DSO_2000dps) != 0) { |
cparata | 3:4274d9103f1d | 139 | return 1; |
cparata | 3:4274d9103f1d | 140 | } |
cparata | 3:4274d9103f1d | 141 | |
cparata | 3:4274d9103f1d | 142 | /* Select default output data rate. */ |
cparata | 3:4274d9103f1d | 143 | _x_last_odr = LSM6DSO_XL_ODR_104Hz; |
cparata | 3:4274d9103f1d | 144 | |
cparata | 3:4274d9103f1d | 145 | /* Select default output data rate. */ |
cparata | 3:4274d9103f1d | 146 | _g_last_odr = LSM6DSO_GY_ODR_104Hz; |
cparata | 3:4274d9103f1d | 147 | |
cparata | 3:4274d9103f1d | 148 | _x_is_enabled = 0; |
cparata | 3:4274d9103f1d | 149 | |
cparata | 3:4274d9103f1d | 150 | _g_is_enabled = 0; |
cparata | 3:4274d9103f1d | 151 | |
cparata | 3:4274d9103f1d | 152 | return 0; |
cparata | 0:6d69e896ce38 | 153 | } |
cparata | 0:6d69e896ce38 | 154 | |
cparata | 0:6d69e896ce38 | 155 | /** |
cparata | 0:6d69e896ce38 | 156 | * @brief Read component ID |
cparata | 0:6d69e896ce38 | 157 | * @param id the WHO_AM_I value |
cparata | 0:6d69e896ce38 | 158 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 159 | */ |
cparata | 0:6d69e896ce38 | 160 | int LSM6DSOSensor::read_id(uint8_t *id) |
cparata | 0:6d69e896ce38 | 161 | { |
cparata | 3:4274d9103f1d | 162 | if (lsm6dso_device_id_get(&_reg_ctx, id) != 0) { |
cparata | 3:4274d9103f1d | 163 | return 1; |
cparata | 3:4274d9103f1d | 164 | } |
cparata | 3:4274d9103f1d | 165 | |
cparata | 3:4274d9103f1d | 166 | return 0; |
cparata | 0:6d69e896ce38 | 167 | } |
cparata | 0:6d69e896ce38 | 168 | |
cparata | 0:6d69e896ce38 | 169 | /** |
cparata | 0:6d69e896ce38 | 170 | * @brief Enable the LSM6DSO accelerometer sensor |
cparata | 0:6d69e896ce38 | 171 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 172 | */ |
cparata | 0:6d69e896ce38 | 173 | int LSM6DSOSensor::enable_x() |
cparata | 0:6d69e896ce38 | 174 | { |
cparata | 3:4274d9103f1d | 175 | /* Check if the component is already enabled */ |
cparata | 3:4274d9103f1d | 176 | if (_x_is_enabled == 1U) { |
cparata | 3:4274d9103f1d | 177 | return 0; |
cparata | 3:4274d9103f1d | 178 | } |
cparata | 3:4274d9103f1d | 179 | |
cparata | 3:4274d9103f1d | 180 | /* Output data rate selection. */ |
cparata | 3:4274d9103f1d | 181 | if (lsm6dso_xl_data_rate_set(&_reg_ctx, _x_last_odr) != 0) { |
cparata | 3:4274d9103f1d | 182 | return 1; |
cparata | 3:4274d9103f1d | 183 | } |
cparata | 3:4274d9103f1d | 184 | |
cparata | 3:4274d9103f1d | 185 | _x_is_enabled = 1; |
cparata | 3:4274d9103f1d | 186 | |
cparata | 0:6d69e896ce38 | 187 | return 0; |
cparata | 0:6d69e896ce38 | 188 | } |
cparata | 0:6d69e896ce38 | 189 | |
cparata | 0:6d69e896ce38 | 190 | /** |
cparata | 0:6d69e896ce38 | 191 | * @brief Disable the LSM6DSO accelerometer sensor |
cparata | 0:6d69e896ce38 | 192 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 193 | */ |
cparata | 0:6d69e896ce38 | 194 | int LSM6DSOSensor::disable_x() |
cparata | 0:6d69e896ce38 | 195 | { |
cparata | 3:4274d9103f1d | 196 | /* Check if the component is already disabled */ |
cparata | 3:4274d9103f1d | 197 | if (_x_is_enabled == 0U) { |
cparata | 3:4274d9103f1d | 198 | return 0; |
cparata | 3:4274d9103f1d | 199 | } |
cparata | 3:4274d9103f1d | 200 | |
cparata | 3:4274d9103f1d | 201 | /* Get current output data rate. */ |
cparata | 3:4274d9103f1d | 202 | if (lsm6dso_xl_data_rate_get(&_reg_ctx, &_x_last_odr) != 0) { |
cparata | 3:4274d9103f1d | 203 | return 1; |
cparata | 3:4274d9103f1d | 204 | } |
cparata | 3:4274d9103f1d | 205 | |
cparata | 3:4274d9103f1d | 206 | /* Output data rate selection - power down. */ |
cparata | 3:4274d9103f1d | 207 | if (lsm6dso_xl_data_rate_set(&_reg_ctx, LSM6DSO_XL_ODR_OFF) != 0) { |
cparata | 3:4274d9103f1d | 208 | return 1; |
cparata | 3:4274d9103f1d | 209 | } |
cparata | 3:4274d9103f1d | 210 | |
cparata | 3:4274d9103f1d | 211 | _x_is_enabled = 0; |
cparata | 3:4274d9103f1d | 212 | |
cparata | 0:6d69e896ce38 | 213 | return 0; |
cparata | 0:6d69e896ce38 | 214 | } |
cparata | 0:6d69e896ce38 | 215 | |
cparata | 0:6d69e896ce38 | 216 | /** |
cparata | 0:6d69e896ce38 | 217 | * @brief Get the LSM6DSO accelerometer sensor sensitivity |
cparata | 0:6d69e896ce38 | 218 | * @param sensitivity pointer where the sensitivity is written |
cparata | 0:6d69e896ce38 | 219 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 220 | */ |
cparata | 0:6d69e896ce38 | 221 | int LSM6DSOSensor::get_x_sensitivity(float *sensitivity) |
cparata | 0:6d69e896ce38 | 222 | { |
cparata | 3:4274d9103f1d | 223 | int ret = 0; |
cparata | 3:4274d9103f1d | 224 | lsm6dso_fs_xl_t full_scale; |
cparata | 3:4274d9103f1d | 225 | |
cparata | 3:4274d9103f1d | 226 | /* Read actual full scale selection from sensor. */ |
cparata | 3:4274d9103f1d | 227 | if (lsm6dso_xl_full_scale_get(&_reg_ctx, &full_scale) != 0) { |
cparata | 3:4274d9103f1d | 228 | return 1; |
cparata | 3:4274d9103f1d | 229 | } |
cparata | 3:4274d9103f1d | 230 | |
cparata | 3:4274d9103f1d | 231 | /* Store the sensitivity based on actual full scale. */ |
cparata | 3:4274d9103f1d | 232 | switch (full_scale) { |
cparata | 3:4274d9103f1d | 233 | case LSM6DSO_2g: |
cparata | 3:4274d9103f1d | 234 | *sensitivity = LSM6DSO_ACC_SENSITIVITY_FS_2G; |
cparata | 3:4274d9103f1d | 235 | break; |
cparata | 3:4274d9103f1d | 236 | |
cparata | 3:4274d9103f1d | 237 | case LSM6DSO_4g: |
cparata | 3:4274d9103f1d | 238 | *sensitivity = LSM6DSO_ACC_SENSITIVITY_FS_4G; |
cparata | 3:4274d9103f1d | 239 | break; |
cparata | 3:4274d9103f1d | 240 | |
cparata | 3:4274d9103f1d | 241 | case LSM6DSO_8g: |
cparata | 3:4274d9103f1d | 242 | *sensitivity = LSM6DSO_ACC_SENSITIVITY_FS_8G; |
cparata | 3:4274d9103f1d | 243 | break; |
cparata | 3:4274d9103f1d | 244 | |
cparata | 3:4274d9103f1d | 245 | case LSM6DSO_16g: |
cparata | 3:4274d9103f1d | 246 | *sensitivity = LSM6DSO_ACC_SENSITIVITY_FS_16G; |
cparata | 3:4274d9103f1d | 247 | break; |
cparata | 3:4274d9103f1d | 248 | |
cparata | 3:4274d9103f1d | 249 | default: |
cparata | 3:4274d9103f1d | 250 | ret = 1; |
cparata | 3:4274d9103f1d | 251 | break; |
cparata | 3:4274d9103f1d | 252 | } |
cparata | 3:4274d9103f1d | 253 | |
cparata | 3:4274d9103f1d | 254 | return ret; |
cparata | 0:6d69e896ce38 | 255 | } |
cparata | 0:6d69e896ce38 | 256 | |
cparata | 0:6d69e896ce38 | 257 | /** |
cparata | 0:6d69e896ce38 | 258 | * @brief Get the LSM6DSO accelerometer sensor output data rate |
cparata | 0:6d69e896ce38 | 259 | * @param odr pointer where the output data rate is written |
cparata | 0:6d69e896ce38 | 260 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 261 | */ |
cparata | 0:6d69e896ce38 | 262 | int LSM6DSOSensor::get_x_odr(float *odr) |
cparata | 0:6d69e896ce38 | 263 | { |
cparata | 3:4274d9103f1d | 264 | int ret = 0; |
cparata | 3:4274d9103f1d | 265 | lsm6dso_odr_xl_t odr_low_level; |
cparata | 3:4274d9103f1d | 266 | |
cparata | 3:4274d9103f1d | 267 | /* Get current output data rate. */ |
cparata | 3:4274d9103f1d | 268 | if (lsm6dso_xl_data_rate_get(&_reg_ctx, &odr_low_level) != 0) { |
cparata | 3:4274d9103f1d | 269 | return 1; |
cparata | 3:4274d9103f1d | 270 | } |
cparata | 3:4274d9103f1d | 271 | |
cparata | 3:4274d9103f1d | 272 | switch (odr_low_level) { |
cparata | 3:4274d9103f1d | 273 | case LSM6DSO_XL_ODR_OFF: |
cparata | 3:4274d9103f1d | 274 | *odr = 0.0f; |
cparata | 3:4274d9103f1d | 275 | break; |
cparata | 3:4274d9103f1d | 276 | |
cparata | 3:4274d9103f1d | 277 | case LSM6DSO_XL_ODR_6Hz5: |
cparata | 3:4274d9103f1d | 278 | *odr = 6.5f; |
cparata | 3:4274d9103f1d | 279 | break; |
cparata | 3:4274d9103f1d | 280 | |
cparata | 3:4274d9103f1d | 281 | case LSM6DSO_XL_ODR_12Hz5: |
cparata | 3:4274d9103f1d | 282 | *odr = 12.5f; |
cparata | 3:4274d9103f1d | 283 | break; |
cparata | 3:4274d9103f1d | 284 | |
cparata | 3:4274d9103f1d | 285 | case LSM6DSO_XL_ODR_26Hz: |
cparata | 3:4274d9103f1d | 286 | *odr = 26.0f; |
cparata | 3:4274d9103f1d | 287 | break; |
cparata | 3:4274d9103f1d | 288 | |
cparata | 3:4274d9103f1d | 289 | case LSM6DSO_XL_ODR_52Hz: |
cparata | 3:4274d9103f1d | 290 | *odr = 52.0f; |
cparata | 3:4274d9103f1d | 291 | break; |
cparata | 3:4274d9103f1d | 292 | |
cparata | 3:4274d9103f1d | 293 | case LSM6DSO_XL_ODR_104Hz: |
cparata | 3:4274d9103f1d | 294 | *odr = 104.0f; |
cparata | 3:4274d9103f1d | 295 | break; |
cparata | 3:4274d9103f1d | 296 | |
cparata | 3:4274d9103f1d | 297 | case LSM6DSO_XL_ODR_208Hz: |
cparata | 3:4274d9103f1d | 298 | *odr = 208.0f; |
cparata | 3:4274d9103f1d | 299 | break; |
cparata | 3:4274d9103f1d | 300 | |
cparata | 3:4274d9103f1d | 301 | case LSM6DSO_XL_ODR_417Hz: |
cparata | 3:4274d9103f1d | 302 | *odr = 417.0f; |
cparata | 3:4274d9103f1d | 303 | break; |
cparata | 3:4274d9103f1d | 304 | |
cparata | 3:4274d9103f1d | 305 | case LSM6DSO_XL_ODR_833Hz: |
cparata | 3:4274d9103f1d | 306 | *odr = 833.0f; |
cparata | 3:4274d9103f1d | 307 | break; |
cparata | 3:4274d9103f1d | 308 | |
cparata | 3:4274d9103f1d | 309 | case LSM6DSO_XL_ODR_1667Hz: |
cparata | 3:4274d9103f1d | 310 | *odr = 1667.0f; |
cparata | 3:4274d9103f1d | 311 | break; |
cparata | 3:4274d9103f1d | 312 | |
cparata | 3:4274d9103f1d | 313 | case LSM6DSO_XL_ODR_3333Hz: |
cparata | 3:4274d9103f1d | 314 | *odr = 3333.0f; |
cparata | 3:4274d9103f1d | 315 | break; |
cparata | 3:4274d9103f1d | 316 | |
cparata | 3:4274d9103f1d | 317 | case LSM6DSO_XL_ODR_6667Hz: |
cparata | 3:4274d9103f1d | 318 | *odr = 6667.0f; |
cparata | 3:4274d9103f1d | 319 | break; |
cparata | 3:4274d9103f1d | 320 | |
cparata | 3:4274d9103f1d | 321 | default: |
cparata | 3:4274d9103f1d | 322 | ret = 1; |
cparata | 3:4274d9103f1d | 323 | break; |
cparata | 3:4274d9103f1d | 324 | } |
cparata | 3:4274d9103f1d | 325 | |
cparata | 3:4274d9103f1d | 326 | return ret; |
cparata | 0:6d69e896ce38 | 327 | } |
cparata | 0:6d69e896ce38 | 328 | |
cparata | 0:6d69e896ce38 | 329 | /** |
cparata | 0:6d69e896ce38 | 330 | * @brief Set the LSM6DSO accelerometer sensor output data rate |
cparata | 0:6d69e896ce38 | 331 | * @param odr the output data rate value to be set |
cparata | 0:6d69e896ce38 | 332 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 333 | */ |
cparata | 0:6d69e896ce38 | 334 | int LSM6DSOSensor::set_x_odr(float odr) |
cparata | 0:6d69e896ce38 | 335 | { |
cparata | 3:4274d9103f1d | 336 | /* Check if the component is enabled */ |
cparata | 3:4274d9103f1d | 337 | if (_x_is_enabled == 1U) { |
cparata | 3:4274d9103f1d | 338 | return set_x_odr_when_enabled(odr); |
cparata | 3:4274d9103f1d | 339 | } else { |
cparata | 3:4274d9103f1d | 340 | return set_x_odr_when_disabled(odr); |
cparata | 3:4274d9103f1d | 341 | } |
cparata | 0:6d69e896ce38 | 342 | } |
cparata | 0:6d69e896ce38 | 343 | |
cparata | 0:6d69e896ce38 | 344 | /** |
cparata | 0:6d69e896ce38 | 345 | * @brief Set the LSM6DSO accelerometer sensor output data rate when enabled |
cparata | 0:6d69e896ce38 | 346 | * @param odr the functional output data rate to be set |
cparata | 0:6d69e896ce38 | 347 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 348 | */ |
cparata | 0:6d69e896ce38 | 349 | int LSM6DSOSensor::set_x_odr_when_enabled(float odr) |
cparata | 0:6d69e896ce38 | 350 | { |
cparata | 3:4274d9103f1d | 351 | lsm6dso_odr_xl_t new_odr; |
cparata | 3:4274d9103f1d | 352 | |
cparata | 3:4274d9103f1d | 353 | new_odr = (odr <= 12.5f) ? LSM6DSO_XL_ODR_12Hz5 |
cparata | 3:4274d9103f1d | 354 | : (odr <= 26.0f) ? LSM6DSO_XL_ODR_26Hz |
cparata | 3:4274d9103f1d | 355 | : (odr <= 52.0f) ? LSM6DSO_XL_ODR_52Hz |
cparata | 3:4274d9103f1d | 356 | : (odr <= 104.0f) ? LSM6DSO_XL_ODR_104Hz |
cparata | 3:4274d9103f1d | 357 | : (odr <= 208.0f) ? LSM6DSO_XL_ODR_208Hz |
cparata | 3:4274d9103f1d | 358 | : (odr <= 417.0f) ? LSM6DSO_XL_ODR_417Hz |
cparata | 3:4274d9103f1d | 359 | : (odr <= 833.0f) ? LSM6DSO_XL_ODR_833Hz |
cparata | 3:4274d9103f1d | 360 | : (odr <= 1667.0f) ? LSM6DSO_XL_ODR_1667Hz |
cparata | 3:4274d9103f1d | 361 | : (odr <= 3333.0f) ? LSM6DSO_XL_ODR_3333Hz |
cparata | 3:4274d9103f1d | 362 | : LSM6DSO_XL_ODR_6667Hz; |
cparata | 3:4274d9103f1d | 363 | |
cparata | 3:4274d9103f1d | 364 | /* Output data rate selection. */ |
cparata | 3:4274d9103f1d | 365 | if (lsm6dso_xl_data_rate_set(&_reg_ctx, new_odr) != 0) { |
cparata | 3:4274d9103f1d | 366 | return 1; |
cparata | 3:4274d9103f1d | 367 | } |
cparata | 3:4274d9103f1d | 368 | |
cparata | 3:4274d9103f1d | 369 | return 0; |
cparata | 0:6d69e896ce38 | 370 | } |
cparata | 0:6d69e896ce38 | 371 | |
cparata | 0:6d69e896ce38 | 372 | /** |
cparata | 0:6d69e896ce38 | 373 | * @brief Set the LSM6DSO accelerometer sensor output data rate when disabled |
cparata | 0:6d69e896ce38 | 374 | * @param odr the functional output data rate to be set |
cparata | 0:6d69e896ce38 | 375 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 376 | */ |
cparata | 0:6d69e896ce38 | 377 | int LSM6DSOSensor::set_x_odr_when_disabled(float odr) |
cparata | 0:6d69e896ce38 | 378 | { |
cparata | 3:4274d9103f1d | 379 | _x_last_odr = (odr <= 12.5f) ? LSM6DSO_XL_ODR_12Hz5 |
cparata | 3:4274d9103f1d | 380 | : (odr <= 26.0f) ? LSM6DSO_XL_ODR_26Hz |
cparata | 3:4274d9103f1d | 381 | : (odr <= 52.0f) ? LSM6DSO_XL_ODR_52Hz |
cparata | 3:4274d9103f1d | 382 | : (odr <= 104.0f) ? LSM6DSO_XL_ODR_104Hz |
cparata | 3:4274d9103f1d | 383 | : (odr <= 208.0f) ? LSM6DSO_XL_ODR_208Hz |
cparata | 3:4274d9103f1d | 384 | : (odr <= 417.0f) ? LSM6DSO_XL_ODR_417Hz |
cparata | 3:4274d9103f1d | 385 | : (odr <= 833.0f) ? LSM6DSO_XL_ODR_833Hz |
cparata | 3:4274d9103f1d | 386 | : (odr <= 1667.0f) ? LSM6DSO_XL_ODR_1667Hz |
cparata | 3:4274d9103f1d | 387 | : (odr <= 3333.0f) ? LSM6DSO_XL_ODR_3333Hz |
cparata | 3:4274d9103f1d | 388 | : LSM6DSO_XL_ODR_6667Hz; |
cparata | 3:4274d9103f1d | 389 | |
cparata | 3:4274d9103f1d | 390 | return 0; |
cparata | 0:6d69e896ce38 | 391 | } |
cparata | 0:6d69e896ce38 | 392 | |
cparata | 0:6d69e896ce38 | 393 | /** |
cparata | 0:6d69e896ce38 | 394 | * @brief Get the LSM6DSO accelerometer sensor full scale |
cparata | 0:6d69e896ce38 | 395 | * @param full_scale pointer where the full scale is written |
cparata | 0:6d69e896ce38 | 396 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 397 | */ |
cparata | 0:6d69e896ce38 | 398 | int LSM6DSOSensor::get_x_fs(float *full_scale) |
cparata | 0:6d69e896ce38 | 399 | { |
cparata | 3:4274d9103f1d | 400 | int ret = 0; |
cparata | 3:4274d9103f1d | 401 | lsm6dso_fs_xl_t fs_low_level; |
cparata | 3:4274d9103f1d | 402 | |
cparata | 3:4274d9103f1d | 403 | /* Read actual full scale selection from sensor. */ |
cparata | 3:4274d9103f1d | 404 | if (lsm6dso_xl_full_scale_get(&_reg_ctx, &fs_low_level) != 0) { |
cparata | 3:4274d9103f1d | 405 | return 1; |
cparata | 3:4274d9103f1d | 406 | } |
cparata | 3:4274d9103f1d | 407 | |
cparata | 3:4274d9103f1d | 408 | switch (fs_low_level) { |
cparata | 3:4274d9103f1d | 409 | case LSM6DSO_2g: |
cparata | 3:4274d9103f1d | 410 | *full_scale = 2.0f; |
cparata | 3:4274d9103f1d | 411 | break; |
cparata | 3:4274d9103f1d | 412 | |
cparata | 3:4274d9103f1d | 413 | case LSM6DSO_4g: |
cparata | 3:4274d9103f1d | 414 | *full_scale = 4.0f; |
cparata | 3:4274d9103f1d | 415 | break; |
cparata | 3:4274d9103f1d | 416 | |
cparata | 3:4274d9103f1d | 417 | case LSM6DSO_8g: |
cparata | 3:4274d9103f1d | 418 | *full_scale = 8.0f; |
cparata | 3:4274d9103f1d | 419 | break; |
cparata | 3:4274d9103f1d | 420 | |
cparata | 3:4274d9103f1d | 421 | case LSM6DSO_16g: |
cparata | 3:4274d9103f1d | 422 | *full_scale = 16.0f; |
cparata | 3:4274d9103f1d | 423 | break; |
cparata | 3:4274d9103f1d | 424 | |
cparata | 3:4274d9103f1d | 425 | default: |
cparata | 3:4274d9103f1d | 426 | ret = 1; |
cparata | 3:4274d9103f1d | 427 | break; |
cparata | 3:4274d9103f1d | 428 | } |
cparata | 3:4274d9103f1d | 429 | |
cparata | 3:4274d9103f1d | 430 | return ret; |
cparata | 0:6d69e896ce38 | 431 | } |
cparata | 0:6d69e896ce38 | 432 | |
cparata | 0:6d69e896ce38 | 433 | /** |
cparata | 0:6d69e896ce38 | 434 | * @brief Set the LSM6DSO accelerometer sensor full scale |
cparata | 0:6d69e896ce38 | 435 | * @param full_scale the functional full scale to be set |
cparata | 0:6d69e896ce38 | 436 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 437 | */ |
cparata | 0:6d69e896ce38 | 438 | int LSM6DSOSensor::set_x_fs(float full_scale) |
cparata | 0:6d69e896ce38 | 439 | { |
cparata | 3:4274d9103f1d | 440 | lsm6dso_fs_xl_t new_fs; |
cparata | 3:4274d9103f1d | 441 | |
cparata | 3:4274d9103f1d | 442 | /* Seems like MISRA C-2012 rule 14.3a violation but only from single file statical analysis point of view because |
cparata | 3:4274d9103f1d | 443 | the parameter passed to the function is not known at the moment of analysis */ |
cparata | 3:4274d9103f1d | 444 | new_fs = (full_scale <= 2.0f) ? LSM6DSO_2g |
cparata | 3:4274d9103f1d | 445 | : (full_scale <= 4.0f) ? LSM6DSO_4g |
cparata | 3:4274d9103f1d | 446 | : (full_scale <= 8.0f) ? LSM6DSO_8g |
cparata | 3:4274d9103f1d | 447 | : LSM6DSO_16g; |
cparata | 3:4274d9103f1d | 448 | |
cparata | 3:4274d9103f1d | 449 | if (lsm6dso_xl_full_scale_set(&_reg_ctx, new_fs) != 0) { |
cparata | 3:4274d9103f1d | 450 | return 1; |
cparata | 3:4274d9103f1d | 451 | } |
cparata | 3:4274d9103f1d | 452 | |
cparata | 3:4274d9103f1d | 453 | return 0; |
cparata | 0:6d69e896ce38 | 454 | } |
cparata | 0:6d69e896ce38 | 455 | |
cparata | 0:6d69e896ce38 | 456 | /** |
martlefebvre94 | 4:bcf0cf6e43a7 | 457 | * @brief Get the LSM6DSO accelerometer sensor power mode |
martlefebvre94 | 4:bcf0cf6e43a7 | 458 | * @param xl_hm_mode the pointer where the high-performance mode is written, xl_ulp_en the pointer where the ultra-low-power enable is written |
martlefebvre94 | 4:bcf0cf6e43a7 | 459 | * @retval 0 in case of success, an error code otherwise |
martlefebvre94 | 4:bcf0cf6e43a7 | 460 | */ |
martlefebvre94 | 4:bcf0cf6e43a7 | 461 | int LSM6DSOSensor::get_x_power_mode(uint8_t *xl_hm_mode, uint8_t *xl_ulp_en) |
martlefebvre94 | 4:bcf0cf6e43a7 | 462 | { |
martlefebvre94 | 4:bcf0cf6e43a7 | 463 | int ret = 0; |
martlefebvre94 | 4:bcf0cf6e43a7 | 464 | lsm6dso_xl_hm_mode_t power_mode_low_level; |
martlefebvre94 | 4:bcf0cf6e43a7 | 465 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 466 | /* Read actual power mode from sensor. */ |
martlefebvre94 | 4:bcf0cf6e43a7 | 467 | if (lsm6dso_xl_power_mode_get(&_reg_ctx, &power_mode_low_level) != 0) { |
martlefebvre94 | 4:bcf0cf6e43a7 | 468 | return 1; |
martlefebvre94 | 4:bcf0cf6e43a7 | 469 | } |
martlefebvre94 | 4:bcf0cf6e43a7 | 470 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 471 | switch (power_mode_low_level) { |
martlefebvre94 | 4:bcf0cf6e43a7 | 472 | case LSM6DSO_HIGH_PERFORMANCE_MD: |
martlefebvre94 | 4:bcf0cf6e43a7 | 473 | *xl_hm_mode = 0; |
martlefebvre94 | 4:bcf0cf6e43a7 | 474 | *xl_ulp_en = 0; |
martlefebvre94 | 4:bcf0cf6e43a7 | 475 | break; |
martlefebvre94 | 4:bcf0cf6e43a7 | 476 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 477 | case LSM6DSO_LOW_NORMAL_POWER_MD: |
martlefebvre94 | 4:bcf0cf6e43a7 | 478 | *xl_hm_mode = 1; |
martlefebvre94 | 4:bcf0cf6e43a7 | 479 | *xl_ulp_en = 0; |
martlefebvre94 | 4:bcf0cf6e43a7 | 480 | break; |
martlefebvre94 | 4:bcf0cf6e43a7 | 481 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 482 | case LSM6DSO_ULTRA_LOW_POWER_MD: |
martlefebvre94 | 4:bcf0cf6e43a7 | 483 | *xl_hm_mode = 0; |
martlefebvre94 | 4:bcf0cf6e43a7 | 484 | *xl_ulp_en = 1; |
martlefebvre94 | 4:bcf0cf6e43a7 | 485 | break; |
martlefebvre94 | 4:bcf0cf6e43a7 | 486 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 487 | default: |
martlefebvre94 | 4:bcf0cf6e43a7 | 488 | ret = 1; |
martlefebvre94 | 4:bcf0cf6e43a7 | 489 | break; |
martlefebvre94 | 4:bcf0cf6e43a7 | 490 | } |
martlefebvre94 | 4:bcf0cf6e43a7 | 491 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 492 | return ret; |
martlefebvre94 | 4:bcf0cf6e43a7 | 493 | } |
martlefebvre94 | 4:bcf0cf6e43a7 | 494 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 495 | /** |
martlefebvre94 | 4:bcf0cf6e43a7 | 496 | * @brief Set the LSM6DSO accelerometer sensor power mode |
martlefebvre94 | 4:bcf0cf6e43a7 | 497 | * @param xl_hm_mode the high-performance mode to be set, xl_ulp_en the ultra-low-power enable to be set |
martlefebvre94 | 4:bcf0cf6e43a7 | 498 | * @retval 0 in case of success, an error code otherwise |
martlefebvre94 | 4:bcf0cf6e43a7 | 499 | */ |
martlefebvre94 | 4:bcf0cf6e43a7 | 500 | int LSM6DSOSensor::set_x_power_mode(uint8_t xl_hm_mode, uint8_t xl_ulp_en) |
martlefebvre94 | 4:bcf0cf6e43a7 | 501 | { |
martlefebvre94 | 4:bcf0cf6e43a7 | 502 | uint8_t power_mode = xl_hm_mode + (xl_ulp_en << 1); |
martlefebvre94 | 4:bcf0cf6e43a7 | 503 | lsm6dso_xl_hm_mode_t new_power_mode; |
martlefebvre94 | 4:bcf0cf6e43a7 | 504 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 505 | new_power_mode = (power_mode == 0) ? LSM6DSO_HIGH_PERFORMANCE_MD |
martlefebvre94 | 4:bcf0cf6e43a7 | 506 | : (power_mode == 1) ? LSM6DSO_LOW_NORMAL_POWER_MD |
martlefebvre94 | 4:bcf0cf6e43a7 | 507 | : LSM6DSO_ULTRA_LOW_POWER_MD; |
martlefebvre94 | 4:bcf0cf6e43a7 | 508 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 509 | if (lsm6dso_xl_power_mode_set(&_reg_ctx, new_power_mode) != 0) { |
martlefebvre94 | 4:bcf0cf6e43a7 | 510 | return 1; |
martlefebvre94 | 4:bcf0cf6e43a7 | 511 | } |
martlefebvre94 | 4:bcf0cf6e43a7 | 512 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 513 | return 0; |
martlefebvre94 | 4:bcf0cf6e43a7 | 514 | } |
martlefebvre94 | 4:bcf0cf6e43a7 | 515 | |
martlefebvre94 | 4:bcf0cf6e43a7 | 516 | /** |
cparata | 0:6d69e896ce38 | 517 | * @brief Get the LSM6DSO accelerometer sensor raw axes |
cparata | 0:6d69e896ce38 | 518 | * @param value pointer where the raw values of the axes are written |
cparata | 0:6d69e896ce38 | 519 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 520 | */ |
cparata | 0:6d69e896ce38 | 521 | int LSM6DSOSensor::get_x_axes_raw(int16_t *value) |
cparata | 0:6d69e896ce38 | 522 | { |
cparata | 3:4274d9103f1d | 523 | axis3bit16_t data_raw; |
cparata | 3:4274d9103f1d | 524 | |
cparata | 3:4274d9103f1d | 525 | /* Read raw data values. */ |
cparata | 3:4274d9103f1d | 526 | if (lsm6dso_acceleration_raw_get(&_reg_ctx, data_raw.u8bit) != 0) { |
cparata | 3:4274d9103f1d | 527 | return 1; |
cparata | 3:4274d9103f1d | 528 | } |
cparata | 3:4274d9103f1d | 529 | |
cparata | 3:4274d9103f1d | 530 | /* Format the data. */ |
cparata | 3:4274d9103f1d | 531 | value[0] = data_raw.i16bit[0]; |
cparata | 3:4274d9103f1d | 532 | value[1] = data_raw.i16bit[1]; |
cparata | 3:4274d9103f1d | 533 | value[2] = data_raw.i16bit[2]; |
cparata | 3:4274d9103f1d | 534 | |
cparata | 3:4274d9103f1d | 535 | return 0; |
cparata | 0:6d69e896ce38 | 536 | } |
cparata | 0:6d69e896ce38 | 537 | |
cparata | 0:6d69e896ce38 | 538 | |
cparata | 0:6d69e896ce38 | 539 | /** |
cparata | 0:6d69e896ce38 | 540 | * @brief Get the LSM6DSO accelerometer sensor axes |
cparata | 0:6d69e896ce38 | 541 | * @param acceleration pointer where the values of the axes are written |
cparata | 0:6d69e896ce38 | 542 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 543 | */ |
cparata | 0:6d69e896ce38 | 544 | int LSM6DSOSensor::get_x_axes(int32_t *acceleration) |
cparata | 0:6d69e896ce38 | 545 | { |
cparata | 3:4274d9103f1d | 546 | axis3bit16_t data_raw; |
cparata | 3:4274d9103f1d | 547 | float sensitivity = 0.0f; |
cparata | 3:4274d9103f1d | 548 | |
cparata | 3:4274d9103f1d | 549 | /* Read raw data values. */ |
cparata | 3:4274d9103f1d | 550 | if (lsm6dso_acceleration_raw_get(&_reg_ctx, data_raw.u8bit) != 0) { |
cparata | 3:4274d9103f1d | 551 | return 1; |
cparata | 3:4274d9103f1d | 552 | } |
cparata | 3:4274d9103f1d | 553 | |
cparata | 3:4274d9103f1d | 554 | /* Get LSM6DSO actual sensitivity. */ |
cparata | 3:4274d9103f1d | 555 | if (get_x_sensitivity(&sensitivity) != 0) { |
cparata | 3:4274d9103f1d | 556 | return 1; |
cparata | 3:4274d9103f1d | 557 | } |
cparata | 3:4274d9103f1d | 558 | |
cparata | 3:4274d9103f1d | 559 | /* Calculate the data. */ |
cparata | 3:4274d9103f1d | 560 | acceleration[0] = (int32_t)((float)((float)data_raw.i16bit[0] * sensitivity)); |
cparata | 3:4274d9103f1d | 561 | acceleration[1] = (int32_t)((float)((float)data_raw.i16bit[1] * sensitivity)); |
cparata | 3:4274d9103f1d | 562 | acceleration[2] = (int32_t)((float)((float)data_raw.i16bit[2] * sensitivity)); |
cparata | 3:4274d9103f1d | 563 | |
cparata | 3:4274d9103f1d | 564 | return 0; |
cparata | 0:6d69e896ce38 | 565 | } |
cparata | 0:6d69e896ce38 | 566 | |
cparata | 0:6d69e896ce38 | 567 | |
cparata | 0:6d69e896ce38 | 568 | /** |
cparata | 0:6d69e896ce38 | 569 | * @brief Enable the LSM6DSO gyroscope sensor |
cparata | 0:6d69e896ce38 | 570 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 571 | */ |
cparata | 0:6d69e896ce38 | 572 | int LSM6DSOSensor::enable_g() |
cparata | 0:6d69e896ce38 | 573 | { |
cparata | 3:4274d9103f1d | 574 | /* Check if the component is already enabled */ |
cparata | 3:4274d9103f1d | 575 | if (_g_is_enabled == 1U) { |
cparata | 3:4274d9103f1d | 576 | return 0; |
cparata | 3:4274d9103f1d | 577 | } |
cparata | 3:4274d9103f1d | 578 | |
cparata | 3:4274d9103f1d | 579 | /* Output data rate selection. */ |
cparata | 3:4274d9103f1d | 580 | if (lsm6dso_gy_data_rate_set(&_reg_ctx, _g_last_odr) != 0) { |
cparata | 3:4274d9103f1d | 581 | return 1; |
cparata | 3:4274d9103f1d | 582 | } |
cparata | 3:4274d9103f1d | 583 | |
cparata | 3:4274d9103f1d | 584 | _g_is_enabled = 1; |
cparata | 3:4274d9103f1d | 585 | |
cparata | 0:6d69e896ce38 | 586 | return 0; |
cparata | 0:6d69e896ce38 | 587 | } |
cparata | 0:6d69e896ce38 | 588 | |
cparata | 0:6d69e896ce38 | 589 | |
cparata | 0:6d69e896ce38 | 590 | /** |
cparata | 0:6d69e896ce38 | 591 | * @brief Disable the LSM6DSO gyroscope sensor |
cparata | 0:6d69e896ce38 | 592 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 593 | */ |
cparata | 0:6d69e896ce38 | 594 | int LSM6DSOSensor::disable_g() |
cparata | 0:6d69e896ce38 | 595 | { |
cparata | 3:4274d9103f1d | 596 | /* Check if the component is already disabled */ |
cparata | 3:4274d9103f1d | 597 | if (_g_is_enabled == 0U) { |
cparata | 3:4274d9103f1d | 598 | return 0; |
cparata | 3:4274d9103f1d | 599 | } |
cparata | 3:4274d9103f1d | 600 | |
cparata | 3:4274d9103f1d | 601 | /* Get current output data rate. */ |
cparata | 3:4274d9103f1d | 602 | if (lsm6dso_gy_data_rate_get(&_reg_ctx, &_g_last_odr) != 0) { |
cparata | 3:4274d9103f1d | 603 | return 1; |
cparata | 3:4274d9103f1d | 604 | } |
cparata | 3:4274d9103f1d | 605 | |
cparata | 3:4274d9103f1d | 606 | /* Output data rate selection - power down. */ |
cparata | 3:4274d9103f1d | 607 | if (lsm6dso_gy_data_rate_set(&_reg_ctx, LSM6DSO_GY_ODR_OFF) != 0) { |
cparata | 3:4274d9103f1d | 608 | return 1; |
cparata | 3:4274d9103f1d | 609 | } |
cparata | 3:4274d9103f1d | 610 | |
cparata | 3:4274d9103f1d | 611 | _g_is_enabled = 0; |
cparata | 3:4274d9103f1d | 612 | |
cparata | 0:6d69e896ce38 | 613 | return 0; |
cparata | 0:6d69e896ce38 | 614 | } |
cparata | 0:6d69e896ce38 | 615 | |
cparata | 0:6d69e896ce38 | 616 | /** |
cparata | 0:6d69e896ce38 | 617 | * @brief Get the LSM6DSO gyroscope sensor sensitivity |
cparata | 0:6d69e896ce38 | 618 | * @param sensitivity pointer where the sensitivity is written |
cparata | 0:6d69e896ce38 | 619 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 620 | */ |
cparata | 0:6d69e896ce38 | 621 | int LSM6DSOSensor::get_g_sensitivity(float *sensitivity) |
cparata | 0:6d69e896ce38 | 622 | { |
cparata | 3:4274d9103f1d | 623 | int ret = 0; |
cparata | 3:4274d9103f1d | 624 | lsm6dso_fs_g_t full_scale; |
cparata | 3:4274d9103f1d | 625 | |
cparata | 3:4274d9103f1d | 626 | /* Read actual full scale selection from sensor. */ |
cparata | 3:4274d9103f1d | 627 | if (lsm6dso_gy_full_scale_get(&_reg_ctx, &full_scale) != 0) { |
cparata | 3:4274d9103f1d | 628 | return 1; |
cparata | 3:4274d9103f1d | 629 | } |
cparata | 3:4274d9103f1d | 630 | |
cparata | 3:4274d9103f1d | 631 | /* Store the sensitivity based on actual full scale. */ |
cparata | 3:4274d9103f1d | 632 | switch (full_scale) { |
cparata | 3:4274d9103f1d | 633 | case LSM6DSO_125dps: |
cparata | 3:4274d9103f1d | 634 | *sensitivity = LSM6DSO_GYRO_SENSITIVITY_FS_125DPS; |
cparata | 3:4274d9103f1d | 635 | break; |
cparata | 3:4274d9103f1d | 636 | |
cparata | 3:4274d9103f1d | 637 | case LSM6DSO_250dps: |
cparata | 3:4274d9103f1d | 638 | *sensitivity = LSM6DSO_GYRO_SENSITIVITY_FS_250DPS; |
cparata | 3:4274d9103f1d | 639 | break; |
cparata | 3:4274d9103f1d | 640 | |
cparata | 3:4274d9103f1d | 641 | case LSM6DSO_500dps: |
cparata | 3:4274d9103f1d | 642 | *sensitivity = LSM6DSO_GYRO_SENSITIVITY_FS_500DPS; |
cparata | 3:4274d9103f1d | 643 | break; |
cparata | 3:4274d9103f1d | 644 | |
cparata | 3:4274d9103f1d | 645 | case LSM6DSO_1000dps: |
cparata | 3:4274d9103f1d | 646 | *sensitivity = LSM6DSO_GYRO_SENSITIVITY_FS_1000DPS; |
cparata | 3:4274d9103f1d | 647 | break; |
cparata | 3:4274d9103f1d | 648 | |
cparata | 3:4274d9103f1d | 649 | case LSM6DSO_2000dps: |
cparata | 3:4274d9103f1d | 650 | *sensitivity = LSM6DSO_GYRO_SENSITIVITY_FS_2000DPS; |
cparata | 3:4274d9103f1d | 651 | break; |
cparata | 3:4274d9103f1d | 652 | |
cparata | 3:4274d9103f1d | 653 | default: |
cparata | 3:4274d9103f1d | 654 | ret = 1; |
cparata | 3:4274d9103f1d | 655 | break; |
cparata | 3:4274d9103f1d | 656 | } |
cparata | 3:4274d9103f1d | 657 | |
cparata | 3:4274d9103f1d | 658 | return ret; |
cparata | 0:6d69e896ce38 | 659 | } |
cparata | 0:6d69e896ce38 | 660 | |
cparata | 0:6d69e896ce38 | 661 | /** |
cparata | 0:6d69e896ce38 | 662 | * @brief Get the LSM6DSO gyroscope sensor output data rate |
cparata | 0:6d69e896ce38 | 663 | * @param odr pointer where the output data rate is written |
cparata | 0:6d69e896ce38 | 664 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 665 | */ |
cparata | 0:6d69e896ce38 | 666 | int LSM6DSOSensor::get_g_odr(float *odr) |
cparata | 0:6d69e896ce38 | 667 | { |
cparata | 3:4274d9103f1d | 668 | int ret = 0; |
cparata | 3:4274d9103f1d | 669 | lsm6dso_odr_g_t odr_low_level; |
cparata | 3:4274d9103f1d | 670 | |
cparata | 3:4274d9103f1d | 671 | /* Get current output data rate. */ |
cparata | 3:4274d9103f1d | 672 | if (lsm6dso_gy_data_rate_get(&_reg_ctx, &odr_low_level) != 0) { |
cparata | 3:4274d9103f1d | 673 | return 1; |
cparata | 3:4274d9103f1d | 674 | } |
cparata | 3:4274d9103f1d | 675 | |
cparata | 3:4274d9103f1d | 676 | switch (odr_low_level) { |
cparata | 3:4274d9103f1d | 677 | case LSM6DSO_GY_ODR_OFF: |
cparata | 3:4274d9103f1d | 678 | *odr = 0.0f; |
cparata | 3:4274d9103f1d | 679 | break; |
cparata | 3:4274d9103f1d | 680 | |
cparata | 3:4274d9103f1d | 681 | case LSM6DSO_GY_ODR_12Hz5: |
cparata | 3:4274d9103f1d | 682 | *odr = 12.5f; |
cparata | 3:4274d9103f1d | 683 | break; |
cparata | 3:4274d9103f1d | 684 | |
cparata | 3:4274d9103f1d | 685 | case LSM6DSO_GY_ODR_26Hz: |
cparata | 3:4274d9103f1d | 686 | *odr = 26.0f; |
cparata | 3:4274d9103f1d | 687 | break; |
cparata | 3:4274d9103f1d | 688 | |
cparata | 3:4274d9103f1d | 689 | case LSM6DSO_GY_ODR_52Hz: |
cparata | 3:4274d9103f1d | 690 | *odr = 52.0f; |
cparata | 3:4274d9103f1d | 691 | break; |
cparata | 3:4274d9103f1d | 692 | |
cparata | 3:4274d9103f1d | 693 | case LSM6DSO_GY_ODR_104Hz: |
cparata | 3:4274d9103f1d | 694 | *odr = 104.0f; |
cparata | 3:4274d9103f1d | 695 | break; |
cparata | 3:4274d9103f1d | 696 | |
cparata | 3:4274d9103f1d | 697 | case LSM6DSO_GY_ODR_208Hz: |
cparata | 3:4274d9103f1d | 698 | *odr = 208.0f; |
cparata | 3:4274d9103f1d | 699 | break; |
cparata | 3:4274d9103f1d | 700 | |
cparata | 3:4274d9103f1d | 701 | case LSM6DSO_GY_ODR_417Hz: |
cparata | 3:4274d9103f1d | 702 | *odr = 417.0f; |
cparata | 3:4274d9103f1d | 703 | break; |
cparata | 3:4274d9103f1d | 704 | |
cparata | 3:4274d9103f1d | 705 | case LSM6DSO_GY_ODR_833Hz: |
cparata | 3:4274d9103f1d | 706 | *odr = 833.0f; |
cparata | 3:4274d9103f1d | 707 | break; |
cparata | 3:4274d9103f1d | 708 | |
cparata | 3:4274d9103f1d | 709 | case LSM6DSO_GY_ODR_1667Hz: |
cparata | 3:4274d9103f1d | 710 | *odr = 1667.0f; |
cparata | 3:4274d9103f1d | 711 | break; |
cparata | 3:4274d9103f1d | 712 | |
cparata | 3:4274d9103f1d | 713 | case LSM6DSO_GY_ODR_3333Hz: |
cparata | 3:4274d9103f1d | 714 | *odr = 3333.0f; |
cparata | 3:4274d9103f1d | 715 | break; |
cparata | 3:4274d9103f1d | 716 | |
cparata | 3:4274d9103f1d | 717 | case LSM6DSO_GY_ODR_6667Hz: |
cparata | 3:4274d9103f1d | 718 | *odr = 6667.0f; |
cparata | 3:4274d9103f1d | 719 | break; |
cparata | 3:4274d9103f1d | 720 | |
cparata | 3:4274d9103f1d | 721 | default: |
cparata | 3:4274d9103f1d | 722 | ret = 1; |
cparata | 3:4274d9103f1d | 723 | break; |
cparata | 3:4274d9103f1d | 724 | } |
cparata | 3:4274d9103f1d | 725 | |
cparata | 3:4274d9103f1d | 726 | return ret; |
cparata | 0:6d69e896ce38 | 727 | } |
cparata | 0:6d69e896ce38 | 728 | |
cparata | 0:6d69e896ce38 | 729 | /** |
cparata | 0:6d69e896ce38 | 730 | * @brief Set the LSM6DSO gyroscope sensor output data rate |
cparata | 0:6d69e896ce38 | 731 | * @param odr the output data rate value to be set |
cparata | 0:6d69e896ce38 | 732 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 733 | */ |
cparata | 0:6d69e896ce38 | 734 | int LSM6DSOSensor::set_g_odr(float odr) |
cparata | 0:6d69e896ce38 | 735 | { |
cparata | 3:4274d9103f1d | 736 | /* Check if the component is enabled */ |
cparata | 3:4274d9103f1d | 737 | if (_g_is_enabled == 1U) { |
cparata | 3:4274d9103f1d | 738 | return set_g_odr_when_enabled(odr); |
cparata | 3:4274d9103f1d | 739 | } else { |
cparata | 3:4274d9103f1d | 740 | return set_g_odr_when_disabled(odr); |
cparata | 3:4274d9103f1d | 741 | } |
cparata | 0:6d69e896ce38 | 742 | } |
cparata | 0:6d69e896ce38 | 743 | |
cparata | 0:6d69e896ce38 | 744 | /** |
cparata | 0:6d69e896ce38 | 745 | * @brief Set the LSM6DSO gyroscope sensor output data rate when enabled |
cparata | 0:6d69e896ce38 | 746 | * @param odr the functional output data rate to be set |
cparata | 0:6d69e896ce38 | 747 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 748 | */ |
cparata | 0:6d69e896ce38 | 749 | int LSM6DSOSensor::set_g_odr_when_enabled(float odr) |
cparata | 0:6d69e896ce38 | 750 | { |
cparata | 3:4274d9103f1d | 751 | lsm6dso_odr_g_t new_odr; |
cparata | 3:4274d9103f1d | 752 | |
cparata | 3:4274d9103f1d | 753 | new_odr = (odr <= 12.5f) ? LSM6DSO_GY_ODR_12Hz5 |
cparata | 3:4274d9103f1d | 754 | : (odr <= 26.0f) ? LSM6DSO_GY_ODR_26Hz |
cparata | 3:4274d9103f1d | 755 | : (odr <= 52.0f) ? LSM6DSO_GY_ODR_52Hz |
cparata | 3:4274d9103f1d | 756 | : (odr <= 104.0f) ? LSM6DSO_GY_ODR_104Hz |
cparata | 3:4274d9103f1d | 757 | : (odr <= 208.0f) ? LSM6DSO_GY_ODR_208Hz |
cparata | 3:4274d9103f1d | 758 | : (odr <= 417.0f) ? LSM6DSO_GY_ODR_417Hz |
cparata | 3:4274d9103f1d | 759 | : (odr <= 833.0f) ? LSM6DSO_GY_ODR_833Hz |
cparata | 3:4274d9103f1d | 760 | : (odr <= 1667.0f) ? LSM6DSO_GY_ODR_1667Hz |
cparata | 3:4274d9103f1d | 761 | : (odr <= 3333.0f) ? LSM6DSO_GY_ODR_3333Hz |
cparata | 3:4274d9103f1d | 762 | : LSM6DSO_GY_ODR_6667Hz; |
cparata | 3:4274d9103f1d | 763 | |
cparata | 3:4274d9103f1d | 764 | /* Output data rate selection. */ |
cparata | 3:4274d9103f1d | 765 | if (lsm6dso_gy_data_rate_set(&_reg_ctx, new_odr) != 0) { |
cparata | 3:4274d9103f1d | 766 | return 1; |
cparata | 3:4274d9103f1d | 767 | } |
cparata | 3:4274d9103f1d | 768 | |
cparata | 3:4274d9103f1d | 769 | return 0; |
cparata | 0:6d69e896ce38 | 770 | } |
cparata | 0:6d69e896ce38 | 771 | |
cparata | 0:6d69e896ce38 | 772 | /** |
cparata | 0:6d69e896ce38 | 773 | * @brief Set the LSM6DSO gyroscope sensor output data rate when disabled |
cparata | 0:6d69e896ce38 | 774 | * @param odr the functional output data rate to be set |
cparata | 0:6d69e896ce38 | 775 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 776 | */ |
cparata | 0:6d69e896ce38 | 777 | int LSM6DSOSensor::set_g_odr_when_disabled(float odr) |
cparata | 0:6d69e896ce38 | 778 | { |
cparata | 3:4274d9103f1d | 779 | _g_last_odr = (odr <= 12.5f) ? LSM6DSO_GY_ODR_12Hz5 |
cparata | 3:4274d9103f1d | 780 | : (odr <= 26.0f) ? LSM6DSO_GY_ODR_26Hz |
cparata | 3:4274d9103f1d | 781 | : (odr <= 52.0f) ? LSM6DSO_GY_ODR_52Hz |
cparata | 3:4274d9103f1d | 782 | : (odr <= 104.0f) ? LSM6DSO_GY_ODR_104Hz |
cparata | 3:4274d9103f1d | 783 | : (odr <= 208.0f) ? LSM6DSO_GY_ODR_208Hz |
cparata | 3:4274d9103f1d | 784 | : (odr <= 417.0f) ? LSM6DSO_GY_ODR_417Hz |
cparata | 3:4274d9103f1d | 785 | : (odr <= 833.0f) ? LSM6DSO_GY_ODR_833Hz |
cparata | 3:4274d9103f1d | 786 | : (odr <= 1667.0f) ? LSM6DSO_GY_ODR_1667Hz |
cparata | 3:4274d9103f1d | 787 | : (odr <= 3333.0f) ? LSM6DSO_GY_ODR_3333Hz |
cparata | 3:4274d9103f1d | 788 | : LSM6DSO_GY_ODR_6667Hz; |
cparata | 3:4274d9103f1d | 789 | |
cparata | 3:4274d9103f1d | 790 | return 0; |
cparata | 0:6d69e896ce38 | 791 | } |
cparata | 0:6d69e896ce38 | 792 | |
cparata | 0:6d69e896ce38 | 793 | |
cparata | 0:6d69e896ce38 | 794 | /** |
cparata | 0:6d69e896ce38 | 795 | * @brief Get the LSM6DSO gyroscope sensor full scale |
cparata | 0:6d69e896ce38 | 796 | * @param full_scale pointer where the full scale is written |
cparata | 0:6d69e896ce38 | 797 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 798 | */ |
cparata | 0:6d69e896ce38 | 799 | int LSM6DSOSensor::get_g_fs(float *full_scale) |
cparata | 0:6d69e896ce38 | 800 | { |
cparata | 3:4274d9103f1d | 801 | int ret = 0; |
cparata | 3:4274d9103f1d | 802 | lsm6dso_fs_g_t fs_low_level; |
cparata | 3:4274d9103f1d | 803 | |
cparata | 3:4274d9103f1d | 804 | /* Read actual full scale selection from sensor. */ |
cparata | 3:4274d9103f1d | 805 | if (lsm6dso_gy_full_scale_get(&_reg_ctx, &fs_low_level) != 0) { |
cparata | 3:4274d9103f1d | 806 | return 1; |
cparata | 3:4274d9103f1d | 807 | } |
cparata | 3:4274d9103f1d | 808 | |
cparata | 3:4274d9103f1d | 809 | switch (fs_low_level) { |
cparata | 3:4274d9103f1d | 810 | case LSM6DSO_125dps: |
cparata | 3:4274d9103f1d | 811 | *full_scale = 125.0f; |
cparata | 3:4274d9103f1d | 812 | break; |
cparata | 3:4274d9103f1d | 813 | |
cparata | 3:4274d9103f1d | 814 | case LSM6DSO_250dps: |
cparata | 3:4274d9103f1d | 815 | *full_scale = 250.0f; |
cparata | 3:4274d9103f1d | 816 | break; |
cparata | 3:4274d9103f1d | 817 | |
cparata | 3:4274d9103f1d | 818 | case LSM6DSO_500dps: |
cparata | 3:4274d9103f1d | 819 | *full_scale = 500.0f; |
cparata | 3:4274d9103f1d | 820 | break; |
cparata | 3:4274d9103f1d | 821 | |
cparata | 3:4274d9103f1d | 822 | case LSM6DSO_1000dps: |
cparata | 3:4274d9103f1d | 823 | *full_scale = 1000.0f; |
cparata | 3:4274d9103f1d | 824 | break; |
cparata | 3:4274d9103f1d | 825 | |
cparata | 3:4274d9103f1d | 826 | case LSM6DSO_2000dps: |
cparata | 3:4274d9103f1d | 827 | *full_scale = 2000.0f; |
cparata | 3:4274d9103f1d | 828 | break; |
cparata | 3:4274d9103f1d | 829 | |
cparata | 3:4274d9103f1d | 830 | default: |
cparata | 3:4274d9103f1d | 831 | ret = 1; |
cparata | 3:4274d9103f1d | 832 | break; |
cparata | 3:4274d9103f1d | 833 | } |
cparata | 3:4274d9103f1d | 834 | |
cparata | 3:4274d9103f1d | 835 | return ret; |
cparata | 0:6d69e896ce38 | 836 | } |
cparata | 0:6d69e896ce38 | 837 | |
cparata | 0:6d69e896ce38 | 838 | /** |
cparata | 0:6d69e896ce38 | 839 | * @brief Set the LSM6DSO gyroscope sensor full scale |
cparata | 0:6d69e896ce38 | 840 | * @param full_scale the functional full scale to be set |
cparata | 0:6d69e896ce38 | 841 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 842 | */ |
cparata | 0:6d69e896ce38 | 843 | int LSM6DSOSensor::set_g_fs(float full_scale) |
cparata | 0:6d69e896ce38 | 844 | { |
cparata | 3:4274d9103f1d | 845 | lsm6dso_fs_g_t new_fs; |
cparata | 3:4274d9103f1d | 846 | |
cparata | 3:4274d9103f1d | 847 | new_fs = (full_scale <= 125.0f) ? LSM6DSO_125dps |
cparata | 3:4274d9103f1d | 848 | : (full_scale <= 250.0f) ? LSM6DSO_250dps |
cparata | 3:4274d9103f1d | 849 | : (full_scale <= 500.0f) ? LSM6DSO_500dps |
cparata | 3:4274d9103f1d | 850 | : (full_scale <= 1000.0f) ? LSM6DSO_1000dps |
cparata | 3:4274d9103f1d | 851 | : LSM6DSO_2000dps; |
cparata | 3:4274d9103f1d | 852 | |
cparata | 3:4274d9103f1d | 853 | if (lsm6dso_gy_full_scale_set(&_reg_ctx, new_fs) != 0) { |
cparata | 3:4274d9103f1d | 854 | return 1; |
cparata | 3:4274d9103f1d | 855 | } |
cparata | 3:4274d9103f1d | 856 | |
cparata | 3:4274d9103f1d | 857 | return 0; |
cparata | 0:6d69e896ce38 | 858 | } |
cparata | 0:6d69e896ce38 | 859 | |
cparata | 0:6d69e896ce38 | 860 | /** |
cparata | 0:6d69e896ce38 | 861 | * @brief Get the LSM6DSO gyroscope sensor raw axes |
cparata | 0:6d69e896ce38 | 862 | * @param value pointer where the raw values of the axes are written |
cparata | 0:6d69e896ce38 | 863 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 864 | */ |
cparata | 0:6d69e896ce38 | 865 | int LSM6DSOSensor::get_g_axes_raw(int16_t *value) |
cparata | 0:6d69e896ce38 | 866 | { |
cparata | 3:4274d9103f1d | 867 | axis3bit16_t data_raw; |
cparata | 3:4274d9103f1d | 868 | |
cparata | 3:4274d9103f1d | 869 | /* Read raw data values. */ |
cparata | 3:4274d9103f1d | 870 | if (lsm6dso_angular_rate_raw_get(&_reg_ctx, data_raw.u8bit) != 0) { |
cparata | 3:4274d9103f1d | 871 | return 1; |
cparata | 3:4274d9103f1d | 872 | } |
cparata | 3:4274d9103f1d | 873 | |
cparata | 3:4274d9103f1d | 874 | /* Format the data. */ |
cparata | 3:4274d9103f1d | 875 | value[0] = data_raw.i16bit[0]; |
cparata | 3:4274d9103f1d | 876 | value[1] = data_raw.i16bit[1]; |
cparata | 3:4274d9103f1d | 877 | value[2] = data_raw.i16bit[2]; |
cparata | 3:4274d9103f1d | 878 | |
cparata | 3:4274d9103f1d | 879 | return 0; |
cparata | 0:6d69e896ce38 | 880 | } |
cparata | 0:6d69e896ce38 | 881 | |
cparata | 0:6d69e896ce38 | 882 | |
cparata | 0:6d69e896ce38 | 883 | /** |
cparata | 0:6d69e896ce38 | 884 | * @brief Get the LSM6DSO gyroscope sensor axes |
cparata | 0:6d69e896ce38 | 885 | * @param angular_rate pointer where the values of the axes are written |
cparata | 0:6d69e896ce38 | 886 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 887 | */ |
cparata | 0:6d69e896ce38 | 888 | int LSM6DSOSensor::get_g_axes(int32_t *angular_rate) |
cparata | 0:6d69e896ce38 | 889 | { |
cparata | 3:4274d9103f1d | 890 | axis3bit16_t data_raw; |
cparata | 3:4274d9103f1d | 891 | float sensitivity; |
cparata | 3:4274d9103f1d | 892 | |
cparata | 3:4274d9103f1d | 893 | /* Read raw data values. */ |
cparata | 3:4274d9103f1d | 894 | if (lsm6dso_angular_rate_raw_get(&_reg_ctx, data_raw.u8bit) != 0) { |
cparata | 3:4274d9103f1d | 895 | return 1; |
cparata | 3:4274d9103f1d | 896 | } |
cparata | 3:4274d9103f1d | 897 | |
cparata | 3:4274d9103f1d | 898 | /* Get LSM6DSO actual sensitivity. */ |
cparata | 3:4274d9103f1d | 899 | if (get_g_sensitivity(&sensitivity) != 0) { |
cparata | 3:4274d9103f1d | 900 | return 1; |
cparata | 3:4274d9103f1d | 901 | } |
cparata | 3:4274d9103f1d | 902 | |
cparata | 3:4274d9103f1d | 903 | /* Calculate the data. */ |
cparata | 3:4274d9103f1d | 904 | angular_rate[0] = (int32_t)((float)((float)data_raw.i16bit[0] * sensitivity)); |
cparata | 3:4274d9103f1d | 905 | angular_rate[1] = (int32_t)((float)((float)data_raw.i16bit[1] * sensitivity)); |
cparata | 3:4274d9103f1d | 906 | angular_rate[2] = (int32_t)((float)((float)data_raw.i16bit[2] * sensitivity)); |
cparata | 3:4274d9103f1d | 907 | |
cparata | 3:4274d9103f1d | 908 | return 0; |
cparata | 0:6d69e896ce38 | 909 | } |
cparata | 0:6d69e896ce38 | 910 | |
cparata | 0:6d69e896ce38 | 911 | |
cparata | 0:6d69e896ce38 | 912 | /** |
cparata | 0:6d69e896ce38 | 913 | * @brief Get the LSM6DSO register value |
cparata | 0:6d69e896ce38 | 914 | * @param reg address to be read |
cparata | 0:6d69e896ce38 | 915 | * @param data pointer where the value is written |
cparata | 0:6d69e896ce38 | 916 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 917 | */ |
cparata | 0:6d69e896ce38 | 918 | int LSM6DSOSensor::read_reg(uint8_t reg, uint8_t *data) |
cparata | 0:6d69e896ce38 | 919 | { |
cparata | 3:4274d9103f1d | 920 | if (lsm6dso_read_reg(&_reg_ctx, reg, data, 1) != 0) { |
cparata | 3:4274d9103f1d | 921 | return 1; |
cparata | 3:4274d9103f1d | 922 | } |
cparata | 3:4274d9103f1d | 923 | |
cparata | 3:4274d9103f1d | 924 | return 0; |
cparata | 0:6d69e896ce38 | 925 | } |
cparata | 0:6d69e896ce38 | 926 | |
cparata | 0:6d69e896ce38 | 927 | |
cparata | 0:6d69e896ce38 | 928 | /** |
cparata | 0:6d69e896ce38 | 929 | * @brief Set the LSM6DSO register value |
cparata | 0:6d69e896ce38 | 930 | * @param reg address to be written |
cparata | 0:6d69e896ce38 | 931 | * @param data value to be written |
cparata | 0:6d69e896ce38 | 932 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 933 | */ |
cparata | 0:6d69e896ce38 | 934 | int LSM6DSOSensor::write_reg(uint8_t reg, uint8_t data) |
cparata | 0:6d69e896ce38 | 935 | { |
cparata | 3:4274d9103f1d | 936 | if (lsm6dso_write_reg(&_reg_ctx, reg, &data, 1) != 0) { |
cparata | 3:4274d9103f1d | 937 | return 1; |
cparata | 3:4274d9103f1d | 938 | } |
cparata | 3:4274d9103f1d | 939 | |
cparata | 3:4274d9103f1d | 940 | return 0; |
cparata | 0:6d69e896ce38 | 941 | } |
cparata | 0:6d69e896ce38 | 942 | |
cparata | 0:6d69e896ce38 | 943 | /** |
cparata | 0:6d69e896ce38 | 944 | * @brief Set the interrupt latch |
cparata | 0:6d69e896ce38 | 945 | * @param status value to be written |
cparata | 0:6d69e896ce38 | 946 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 947 | */ |
cparata | 0:6d69e896ce38 | 948 | int LSM6DSOSensor::set_interrupt_latch(uint8_t status) |
cparata | 0:6d69e896ce38 | 949 | { |
cparata | 3:4274d9103f1d | 950 | if (status > 1U) { |
cparata | 3:4274d9103f1d | 951 | return 1; |
cparata | 3:4274d9103f1d | 952 | } |
cparata | 3:4274d9103f1d | 953 | |
cparata | 3:4274d9103f1d | 954 | if (lsm6dso_int_notification_set(&_reg_ctx, (lsm6dso_lir_t)status) != 0) { |
cparata | 3:4274d9103f1d | 955 | return 1; |
cparata | 3:4274d9103f1d | 956 | } |
cparata | 3:4274d9103f1d | 957 | |
cparata | 3:4274d9103f1d | 958 | return 0; |
cparata | 0:6d69e896ce38 | 959 | } |
cparata | 0:6d69e896ce38 | 960 | |
cparata | 0:6d69e896ce38 | 961 | /** |
cparata | 0:6d69e896ce38 | 962 | * @brief Enable free fall detection |
cparata | 0:6d69e896ce38 | 963 | * @param int_pin interrupt pin line to be used |
cparata | 0:6d69e896ce38 | 964 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 965 | */ |
cparata | 0:6d69e896ce38 | 966 | int LSM6DSOSensor::enable_free_fall_detection(LSM6DSO_Interrupt_Pin_t int_pin) |
cparata | 0:6d69e896ce38 | 967 | { |
cparata | 3:4274d9103f1d | 968 | int ret = 0; |
cparata | 3:4274d9103f1d | 969 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 970 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 971 | |
cparata | 3:4274d9103f1d | 972 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 973 | if (set_x_odr(416.0f) != 0) { |
cparata | 3:4274d9103f1d | 974 | return 1; |
cparata | 3:4274d9103f1d | 975 | } |
cparata | 3:4274d9103f1d | 976 | |
cparata | 3:4274d9103f1d | 977 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 978 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 979 | return 1; |
cparata | 3:4274d9103f1d | 980 | } |
cparata | 3:4274d9103f1d | 981 | |
cparata | 3:4274d9103f1d | 982 | /* FF_DUR setting */ |
cparata | 3:4274d9103f1d | 983 | if (lsm6dso_ff_dur_set(&_reg_ctx, 0x06) != 0) { |
cparata | 3:4274d9103f1d | 984 | return 1; |
cparata | 3:4274d9103f1d | 985 | } |
cparata | 3:4274d9103f1d | 986 | |
cparata | 3:4274d9103f1d | 987 | /* WAKE_DUR setting */ |
cparata | 3:4274d9103f1d | 988 | if (lsm6dso_wkup_dur_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 989 | return 1; |
cparata | 3:4274d9103f1d | 990 | } |
cparata | 3:4274d9103f1d | 991 | |
cparata | 3:4274d9103f1d | 992 | /* SLEEP_DUR setting */ |
cparata | 3:4274d9103f1d | 993 | if (lsm6dso_act_sleep_dur_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 994 | return 1; |
cparata | 3:4274d9103f1d | 995 | } |
cparata | 3:4274d9103f1d | 996 | |
cparata | 3:4274d9103f1d | 997 | /* FF_THS setting */ |
cparata | 3:4274d9103f1d | 998 | if (lsm6dso_ff_threshold_set(&_reg_ctx, LSM6DSO_FF_TSH_312mg) != 0) { |
cparata | 0:6d69e896ce38 | 999 | return 1; |
cparata | 3:4274d9103f1d | 1000 | } |
cparata | 3:4274d9103f1d | 1001 | |
cparata | 3:4274d9103f1d | 1002 | /* Enable free fall event on either INT1 or INT2 pin */ |
cparata | 3:4274d9103f1d | 1003 | switch (int_pin) { |
cparata | 3:4274d9103f1d | 1004 | case LSM6DSO_INT1_PIN: |
cparata | 3:4274d9103f1d | 1005 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1006 | return 1; |
cparata | 3:4274d9103f1d | 1007 | } |
cparata | 3:4274d9103f1d | 1008 | |
cparata | 3:4274d9103f1d | 1009 | val1.md1_cfg.int1_ff = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1010 | |
cparata | 3:4274d9103f1d | 1011 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1012 | return 1; |
cparata | 3:4274d9103f1d | 1013 | } |
cparata | 3:4274d9103f1d | 1014 | break; |
cparata | 3:4274d9103f1d | 1015 | |
cparata | 3:4274d9103f1d | 1016 | case LSM6DSO_INT2_PIN: |
cparata | 3:4274d9103f1d | 1017 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1018 | return 1; |
cparata | 3:4274d9103f1d | 1019 | } |
cparata | 3:4274d9103f1d | 1020 | |
cparata | 3:4274d9103f1d | 1021 | val2.md2_cfg.int2_ff = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1022 | |
cparata | 3:4274d9103f1d | 1023 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1024 | return 1; |
cparata | 3:4274d9103f1d | 1025 | } |
cparata | 3:4274d9103f1d | 1026 | break; |
cparata | 3:4274d9103f1d | 1027 | |
cparata | 3:4274d9103f1d | 1028 | default: |
cparata | 3:4274d9103f1d | 1029 | ret = 1; |
cparata | 3:4274d9103f1d | 1030 | break; |
cparata | 3:4274d9103f1d | 1031 | } |
cparata | 3:4274d9103f1d | 1032 | |
cparata | 3:4274d9103f1d | 1033 | return ret; |
cparata | 0:6d69e896ce38 | 1034 | } |
cparata | 0:6d69e896ce38 | 1035 | |
cparata | 0:6d69e896ce38 | 1036 | /** |
cparata | 0:6d69e896ce38 | 1037 | * @brief Disable free fall detection |
cparata | 0:6d69e896ce38 | 1038 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1039 | */ |
cparata | 0:6d69e896ce38 | 1040 | int LSM6DSOSensor::disable_free_fall_detection() |
cparata | 0:6d69e896ce38 | 1041 | { |
cparata | 3:4274d9103f1d | 1042 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1043 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1044 | |
cparata | 3:4274d9103f1d | 1045 | /* Disable free fall event on both INT1 and INT2 pins */ |
cparata | 3:4274d9103f1d | 1046 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1047 | return 1; |
cparata | 3:4274d9103f1d | 1048 | } |
cparata | 3:4274d9103f1d | 1049 | |
cparata | 3:4274d9103f1d | 1050 | val1.md1_cfg.int1_ff = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1051 | |
cparata | 3:4274d9103f1d | 1052 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1053 | return 1; |
cparata | 3:4274d9103f1d | 1054 | } |
cparata | 3:4274d9103f1d | 1055 | |
cparata | 3:4274d9103f1d | 1056 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1057 | return 1; |
cparata | 3:4274d9103f1d | 1058 | } |
cparata | 3:4274d9103f1d | 1059 | |
cparata | 3:4274d9103f1d | 1060 | val2.md2_cfg.int2_ff = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1061 | |
cparata | 3:4274d9103f1d | 1062 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1063 | return 1; |
cparata | 3:4274d9103f1d | 1064 | } |
cparata | 3:4274d9103f1d | 1065 | |
cparata | 3:4274d9103f1d | 1066 | /* FF_DUR setting */ |
cparata | 3:4274d9103f1d | 1067 | if (lsm6dso_ff_dur_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1068 | return 1; |
cparata | 3:4274d9103f1d | 1069 | } |
cparata | 3:4274d9103f1d | 1070 | |
cparata | 3:4274d9103f1d | 1071 | /* FF_THS setting */ |
cparata | 3:4274d9103f1d | 1072 | if (lsm6dso_ff_threshold_set(&_reg_ctx, LSM6DSO_FF_TSH_156mg) != 0) { |
cparata | 3:4274d9103f1d | 1073 | return 1; |
cparata | 3:4274d9103f1d | 1074 | } |
cparata | 3:4274d9103f1d | 1075 | |
cparata | 3:4274d9103f1d | 1076 | return 0; |
cparata | 0:6d69e896ce38 | 1077 | } |
cparata | 0:6d69e896ce38 | 1078 | |
cparata | 0:6d69e896ce38 | 1079 | /** |
cparata | 0:6d69e896ce38 | 1080 | * @brief Set free fall threshold |
cparata | 0:6d69e896ce38 | 1081 | * @param thr free fall detection threshold |
cparata | 0:6d69e896ce38 | 1082 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1083 | */ |
cparata | 0:6d69e896ce38 | 1084 | int LSM6DSOSensor::set_free_fall_threshold(uint8_t thr) |
cparata | 0:6d69e896ce38 | 1085 | { |
cparata | 3:4274d9103f1d | 1086 | if (lsm6dso_ff_threshold_set(&_reg_ctx, (lsm6dso_ff_ths_t)thr) != 0) { |
cparata | 3:4274d9103f1d | 1087 | return 1; |
cparata | 3:4274d9103f1d | 1088 | } |
cparata | 3:4274d9103f1d | 1089 | |
cparata | 3:4274d9103f1d | 1090 | return 0; |
cparata | 0:6d69e896ce38 | 1091 | } |
cparata | 0:6d69e896ce38 | 1092 | |
cparata | 0:6d69e896ce38 | 1093 | |
cparata | 0:6d69e896ce38 | 1094 | /** |
cparata | 0:6d69e896ce38 | 1095 | * @brief Set free fall duration |
cparata | 0:6d69e896ce38 | 1096 | * @param dur free fall detection duration |
cparata | 0:6d69e896ce38 | 1097 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1098 | */ |
cparata | 0:6d69e896ce38 | 1099 | int LSM6DSOSensor::set_free_fall_duration(uint8_t dur) |
cparata | 0:6d69e896ce38 | 1100 | { |
cparata | 3:4274d9103f1d | 1101 | if (lsm6dso_ff_dur_set(&_reg_ctx, dur) != 0) { |
cparata | 3:4274d9103f1d | 1102 | return 1; |
cparata | 3:4274d9103f1d | 1103 | } |
cparata | 3:4274d9103f1d | 1104 | |
cparata | 3:4274d9103f1d | 1105 | return 0; |
cparata | 0:6d69e896ce38 | 1106 | } |
cparata | 0:6d69e896ce38 | 1107 | |
cparata | 0:6d69e896ce38 | 1108 | |
cparata | 0:6d69e896ce38 | 1109 | /** |
cparata | 0:6d69e896ce38 | 1110 | * @brief Enable pedometer |
cparata | 0:6d69e896ce38 | 1111 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1112 | */ |
cparata | 0:6d69e896ce38 | 1113 | int LSM6DSOSensor::enable_pedometer() |
cparata | 0:6d69e896ce38 | 1114 | { |
cparata | 0:6d69e896ce38 | 1115 | lsm6dso_pin_int1_route_t val; |
cparata | 0:6d69e896ce38 | 1116 | |
cparata | 3:4274d9103f1d | 1117 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 1118 | if (set_x_odr(26.0f) != 0) { |
cparata | 3:4274d9103f1d | 1119 | return 1; |
cparata | 3:4274d9103f1d | 1120 | } |
cparata | 3:4274d9103f1d | 1121 | |
cparata | 3:4274d9103f1d | 1122 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 1123 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 1124 | return 1; |
cparata | 3:4274d9103f1d | 1125 | } |
cparata | 3:4274d9103f1d | 1126 | |
cparata | 3:4274d9103f1d | 1127 | /* Enable pedometer algorithm. */ |
cparata | 3:4274d9103f1d | 1128 | if (lsm6dso_pedo_sens_set(&_reg_ctx, LSM6DSO_PEDO_BASE_MODE) != 0) { |
cparata | 3:4274d9103f1d | 1129 | return 1; |
cparata | 3:4274d9103f1d | 1130 | } |
cparata | 3:4274d9103f1d | 1131 | |
cparata | 3:4274d9103f1d | 1132 | /* Enable step detector on INT1 pin */ |
cparata | 3:4274d9103f1d | 1133 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val) != 0) { |
cparata | 3:4274d9103f1d | 1134 | return 1; |
cparata | 3:4274d9103f1d | 1135 | } |
cparata | 3:4274d9103f1d | 1136 | |
cparata | 3:4274d9103f1d | 1137 | val.emb_func_int1.int1_step_detector = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1138 | |
cparata | 3:4274d9103f1d | 1139 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val) != 0) { |
cparata | 3:4274d9103f1d | 1140 | return 1; |
cparata | 3:4274d9103f1d | 1141 | } |
cparata | 3:4274d9103f1d | 1142 | |
cparata | 3:4274d9103f1d | 1143 | return 0; |
cparata | 0:6d69e896ce38 | 1144 | } |
cparata | 0:6d69e896ce38 | 1145 | |
cparata | 0:6d69e896ce38 | 1146 | /** |
cparata | 0:6d69e896ce38 | 1147 | * @brief Disable pedometer |
cparata | 0:6d69e896ce38 | 1148 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1149 | */ |
cparata | 0:6d69e896ce38 | 1150 | int LSM6DSOSensor::disable_pedometer() |
cparata | 0:6d69e896ce38 | 1151 | { |
cparata | 3:4274d9103f1d | 1152 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1153 | |
cparata | 3:4274d9103f1d | 1154 | /* Disable step detector on INT1 pin */ |
cparata | 3:4274d9103f1d | 1155 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1156 | return 1; |
cparata | 3:4274d9103f1d | 1157 | } |
cparata | 3:4274d9103f1d | 1158 | |
cparata | 3:4274d9103f1d | 1159 | val1.emb_func_int1.int1_step_detector = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1160 | |
cparata | 3:4274d9103f1d | 1161 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1162 | return 1; |
cparata | 3:4274d9103f1d | 1163 | } |
cparata | 3:4274d9103f1d | 1164 | |
cparata | 3:4274d9103f1d | 1165 | /* Disable pedometer algorithm. */ |
cparata | 3:4274d9103f1d | 1166 | if (lsm6dso_pedo_sens_set(&_reg_ctx, LSM6DSO_PEDO_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1167 | return 1; |
cparata | 3:4274d9103f1d | 1168 | } |
cparata | 3:4274d9103f1d | 1169 | |
cparata | 3:4274d9103f1d | 1170 | return 0; |
cparata | 0:6d69e896ce38 | 1171 | } |
cparata | 0:6d69e896ce38 | 1172 | |
cparata | 0:6d69e896ce38 | 1173 | /** |
cparata | 0:6d69e896ce38 | 1174 | * @brief Get step count |
cparata | 0:6d69e896ce38 | 1175 | * @param step_count step counter |
cparata | 0:6d69e896ce38 | 1176 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1177 | */ |
cparata | 0:6d69e896ce38 | 1178 | int LSM6DSOSensor::get_step_counter(uint16_t *step_count) |
cparata | 0:6d69e896ce38 | 1179 | { |
cparata | 3:4274d9103f1d | 1180 | if (lsm6dso_number_of_steps_get(&_reg_ctx, (uint8_t *)step_count) != 0) { |
cparata | 3:4274d9103f1d | 1181 | return 1; |
cparata | 3:4274d9103f1d | 1182 | } |
cparata | 3:4274d9103f1d | 1183 | |
cparata | 3:4274d9103f1d | 1184 | return 0; |
cparata | 0:6d69e896ce38 | 1185 | } |
cparata | 0:6d69e896ce38 | 1186 | |
cparata | 0:6d69e896ce38 | 1187 | /** |
cparata | 0:6d69e896ce38 | 1188 | * @brief Enable step counter reset |
cparata | 0:6d69e896ce38 | 1189 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1190 | */ |
cparata | 0:6d69e896ce38 | 1191 | int LSM6DSOSensor::reset_step_counter() |
cparata | 0:6d69e896ce38 | 1192 | { |
cparata | 3:4274d9103f1d | 1193 | if (lsm6dso_steps_reset(&_reg_ctx) != 0) { |
cparata | 3:4274d9103f1d | 1194 | return 1; |
cparata | 3:4274d9103f1d | 1195 | } |
cparata | 3:4274d9103f1d | 1196 | |
cparata | 3:4274d9103f1d | 1197 | return 0; |
cparata | 0:6d69e896ce38 | 1198 | } |
cparata | 0:6d69e896ce38 | 1199 | |
cparata | 0:6d69e896ce38 | 1200 | /** |
cparata | 0:6d69e896ce38 | 1201 | * @brief Enable tilt detection |
cparata | 0:6d69e896ce38 | 1202 | * @param int_pin interrupt pin line to be used |
cparata | 0:6d69e896ce38 | 1203 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1204 | */ |
cparata | 0:6d69e896ce38 | 1205 | int LSM6DSOSensor::enable_tilt_detection(LSM6DSO_Interrupt_Pin_t int_pin) |
cparata | 0:6d69e896ce38 | 1206 | { |
cparata | 3:4274d9103f1d | 1207 | int ret = 0; |
cparata | 3:4274d9103f1d | 1208 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1209 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1210 | |
cparata | 3:4274d9103f1d | 1211 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 1212 | if (set_x_odr(26.0f) != 0) { |
cparata | 3:4274d9103f1d | 1213 | return 1; |
cparata | 3:4274d9103f1d | 1214 | } |
cparata | 3:4274d9103f1d | 1215 | |
cparata | 3:4274d9103f1d | 1216 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 1217 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 1218 | return 1; |
cparata | 3:4274d9103f1d | 1219 | } |
cparata | 3:4274d9103f1d | 1220 | |
cparata | 3:4274d9103f1d | 1221 | /* Enable tilt calculation. */ |
cparata | 3:4274d9103f1d | 1222 | if (lsm6dso_tilt_sens_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 0:6d69e896ce38 | 1223 | return 1; |
cparata | 3:4274d9103f1d | 1224 | } |
cparata | 3:4274d9103f1d | 1225 | |
cparata | 3:4274d9103f1d | 1226 | /* Enable tilt event on either INT1 or INT2 pin */ |
cparata | 3:4274d9103f1d | 1227 | switch (int_pin) { |
cparata | 3:4274d9103f1d | 1228 | case LSM6DSO_INT1_PIN: |
cparata | 3:4274d9103f1d | 1229 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1230 | return 1; |
cparata | 3:4274d9103f1d | 1231 | } |
cparata | 3:4274d9103f1d | 1232 | |
cparata | 3:4274d9103f1d | 1233 | val1.emb_func_int1.int1_tilt = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1234 | |
cparata | 3:4274d9103f1d | 1235 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1236 | return 1; |
cparata | 3:4274d9103f1d | 1237 | } |
cparata | 3:4274d9103f1d | 1238 | break; |
cparata | 3:4274d9103f1d | 1239 | |
cparata | 3:4274d9103f1d | 1240 | case LSM6DSO_INT2_PIN: |
cparata | 3:4274d9103f1d | 1241 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1242 | return 1; |
cparata | 3:4274d9103f1d | 1243 | } |
cparata | 3:4274d9103f1d | 1244 | |
cparata | 3:4274d9103f1d | 1245 | val2.emb_func_int2.int2_tilt = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1246 | |
cparata | 3:4274d9103f1d | 1247 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1248 | return 1; |
cparata | 3:4274d9103f1d | 1249 | } |
cparata | 3:4274d9103f1d | 1250 | break; |
cparata | 3:4274d9103f1d | 1251 | |
cparata | 3:4274d9103f1d | 1252 | default: |
cparata | 3:4274d9103f1d | 1253 | ret = 1; |
cparata | 3:4274d9103f1d | 1254 | break; |
cparata | 3:4274d9103f1d | 1255 | } |
cparata | 3:4274d9103f1d | 1256 | |
cparata | 3:4274d9103f1d | 1257 | return ret; |
cparata | 0:6d69e896ce38 | 1258 | } |
cparata | 0:6d69e896ce38 | 1259 | |
cparata | 0:6d69e896ce38 | 1260 | /** |
cparata | 0:6d69e896ce38 | 1261 | * @brief Disable tilt detection |
cparata | 0:6d69e896ce38 | 1262 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1263 | */ |
cparata | 0:6d69e896ce38 | 1264 | int LSM6DSOSensor::disable_tilt_detection() |
cparata | 0:6d69e896ce38 | 1265 | { |
cparata | 3:4274d9103f1d | 1266 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1267 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1268 | |
cparata | 3:4274d9103f1d | 1269 | /* Disable tilt event on both INT1 and INT2 pins */ |
cparata | 3:4274d9103f1d | 1270 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1271 | return 1; |
cparata | 3:4274d9103f1d | 1272 | } |
cparata | 3:4274d9103f1d | 1273 | |
cparata | 3:4274d9103f1d | 1274 | val1.emb_func_int1.int1_tilt = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1275 | |
cparata | 3:4274d9103f1d | 1276 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1277 | return 1; |
cparata | 3:4274d9103f1d | 1278 | } |
cparata | 3:4274d9103f1d | 1279 | |
cparata | 3:4274d9103f1d | 1280 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1281 | return 1; |
cparata | 3:4274d9103f1d | 1282 | } |
cparata | 3:4274d9103f1d | 1283 | |
cparata | 3:4274d9103f1d | 1284 | val2.emb_func_int2.int2_tilt = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1285 | |
cparata | 3:4274d9103f1d | 1286 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1287 | return 1; |
cparata | 3:4274d9103f1d | 1288 | } |
cparata | 3:4274d9103f1d | 1289 | |
cparata | 3:4274d9103f1d | 1290 | /* Disable tilt calculation. */ |
cparata | 3:4274d9103f1d | 1291 | if (lsm6dso_tilt_sens_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1292 | return 1; |
cparata | 3:4274d9103f1d | 1293 | } |
cparata | 3:4274d9103f1d | 1294 | |
cparata | 3:4274d9103f1d | 1295 | return 0; |
cparata | 0:6d69e896ce38 | 1296 | } |
cparata | 0:6d69e896ce38 | 1297 | |
cparata | 0:6d69e896ce38 | 1298 | /** |
cparata | 0:6d69e896ce38 | 1299 | * @brief Enable wake up detection |
cparata | 0:6d69e896ce38 | 1300 | * @param int_pin interrupt pin line to be used |
cparata | 0:6d69e896ce38 | 1301 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1302 | */ |
cparata | 0:6d69e896ce38 | 1303 | int LSM6DSOSensor::enable_wake_up_detection(LSM6DSO_Interrupt_Pin_t int_pin) |
cparata | 0:6d69e896ce38 | 1304 | { |
cparata | 3:4274d9103f1d | 1305 | int ret = 0; |
cparata | 3:4274d9103f1d | 1306 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1307 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1308 | |
cparata | 3:4274d9103f1d | 1309 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 1310 | if (set_x_odr(416.0f) != 0) { |
cparata | 3:4274d9103f1d | 1311 | return 1; |
cparata | 3:4274d9103f1d | 1312 | } |
cparata | 3:4274d9103f1d | 1313 | |
cparata | 3:4274d9103f1d | 1314 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 1315 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 1316 | return 1; |
cparata | 3:4274d9103f1d | 1317 | } |
cparata | 3:4274d9103f1d | 1318 | |
cparata | 3:4274d9103f1d | 1319 | /* WAKE_DUR setting */ |
cparata | 3:4274d9103f1d | 1320 | if (lsm6dso_wkup_dur_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1321 | return 1; |
cparata | 3:4274d9103f1d | 1322 | } |
cparata | 3:4274d9103f1d | 1323 | |
cparata | 3:4274d9103f1d | 1324 | /* Set wake up threshold. */ |
cparata | 3:4274d9103f1d | 1325 | if (lsm6dso_wkup_threshold_set(&_reg_ctx, 0x02) != 0) { |
cparata | 0:6d69e896ce38 | 1326 | return 1; |
cparata | 3:4274d9103f1d | 1327 | } |
cparata | 3:4274d9103f1d | 1328 | |
cparata | 3:4274d9103f1d | 1329 | /* Enable wake up event on either INT1 or INT2 pin */ |
cparata | 3:4274d9103f1d | 1330 | switch (int_pin) { |
cparata | 3:4274d9103f1d | 1331 | case LSM6DSO_INT1_PIN: |
cparata | 3:4274d9103f1d | 1332 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1333 | return 1; |
cparata | 3:4274d9103f1d | 1334 | } |
cparata | 3:4274d9103f1d | 1335 | |
cparata | 3:4274d9103f1d | 1336 | val1.md1_cfg.int1_wu = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1337 | |
cparata | 3:4274d9103f1d | 1338 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1339 | return 1; |
cparata | 3:4274d9103f1d | 1340 | } |
cparata | 3:4274d9103f1d | 1341 | break; |
cparata | 3:4274d9103f1d | 1342 | |
cparata | 3:4274d9103f1d | 1343 | case LSM6DSO_INT2_PIN: |
cparata | 3:4274d9103f1d | 1344 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1345 | return 1; |
cparata | 3:4274d9103f1d | 1346 | } |
cparata | 3:4274d9103f1d | 1347 | |
cparata | 3:4274d9103f1d | 1348 | val2.md2_cfg.int2_wu = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1349 | |
cparata | 3:4274d9103f1d | 1350 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1351 | return 1; |
cparata | 3:4274d9103f1d | 1352 | } |
cparata | 3:4274d9103f1d | 1353 | break; |
cparata | 3:4274d9103f1d | 1354 | |
cparata | 3:4274d9103f1d | 1355 | default: |
cparata | 3:4274d9103f1d | 1356 | ret = 1; |
cparata | 3:4274d9103f1d | 1357 | break; |
cparata | 3:4274d9103f1d | 1358 | } |
cparata | 3:4274d9103f1d | 1359 | |
cparata | 3:4274d9103f1d | 1360 | return ret; |
cparata | 0:6d69e896ce38 | 1361 | } |
cparata | 0:6d69e896ce38 | 1362 | |
cparata | 0:6d69e896ce38 | 1363 | |
cparata | 0:6d69e896ce38 | 1364 | /** |
cparata | 0:6d69e896ce38 | 1365 | * @brief Disable wake up detection |
cparata | 0:6d69e896ce38 | 1366 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1367 | */ |
cparata | 0:6d69e896ce38 | 1368 | int LSM6DSOSensor::disable_wake_up_detection() |
cparata | 0:6d69e896ce38 | 1369 | { |
cparata | 0:6d69e896ce38 | 1370 | lsm6dso_pin_int1_route_t val1; |
cparata | 0:6d69e896ce38 | 1371 | lsm6dso_pin_int2_route_t val2; |
cparata | 0:6d69e896ce38 | 1372 | |
cparata | 3:4274d9103f1d | 1373 | /* Disable wake up event on both INT1 and INT2 pins */ |
cparata | 3:4274d9103f1d | 1374 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1375 | return 1; |
cparata | 3:4274d9103f1d | 1376 | } |
cparata | 3:4274d9103f1d | 1377 | |
cparata | 3:4274d9103f1d | 1378 | val1.md1_cfg.int1_wu = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1379 | |
cparata | 3:4274d9103f1d | 1380 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1381 | return 1; |
cparata | 3:4274d9103f1d | 1382 | } |
cparata | 3:4274d9103f1d | 1383 | |
cparata | 3:4274d9103f1d | 1384 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1385 | return 1; |
cparata | 3:4274d9103f1d | 1386 | } |
cparata | 3:4274d9103f1d | 1387 | |
cparata | 3:4274d9103f1d | 1388 | val2.md2_cfg.int2_wu = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1389 | |
cparata | 3:4274d9103f1d | 1390 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1391 | return 1; |
cparata | 3:4274d9103f1d | 1392 | } |
cparata | 3:4274d9103f1d | 1393 | |
cparata | 3:4274d9103f1d | 1394 | /* Reset wake up threshold. */ |
cparata | 3:4274d9103f1d | 1395 | if (lsm6dso_wkup_threshold_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1396 | return 1; |
cparata | 3:4274d9103f1d | 1397 | } |
cparata | 3:4274d9103f1d | 1398 | |
cparata | 3:4274d9103f1d | 1399 | /* WAKE_DUR setting */ |
cparata | 3:4274d9103f1d | 1400 | if (lsm6dso_wkup_dur_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1401 | return 1; |
cparata | 3:4274d9103f1d | 1402 | } |
cparata | 3:4274d9103f1d | 1403 | |
cparata | 3:4274d9103f1d | 1404 | return 0; |
cparata | 0:6d69e896ce38 | 1405 | } |
cparata | 0:6d69e896ce38 | 1406 | |
cparata | 0:6d69e896ce38 | 1407 | /** |
cparata | 0:6d69e896ce38 | 1408 | * @brief Set wake up threshold |
cparata | 0:6d69e896ce38 | 1409 | * @param thr wake up detection threshold |
cparata | 0:6d69e896ce38 | 1410 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1411 | */ |
cparata | 0:6d69e896ce38 | 1412 | int LSM6DSOSensor::set_wake_up_threshold(uint8_t thr) |
cparata | 0:6d69e896ce38 | 1413 | { |
cparata | 3:4274d9103f1d | 1414 | /* Set wake up threshold. */ |
cparata | 3:4274d9103f1d | 1415 | if (lsm6dso_wkup_threshold_set(&_reg_ctx, thr) != 0) { |
cparata | 3:4274d9103f1d | 1416 | return 1; |
cparata | 3:4274d9103f1d | 1417 | } |
cparata | 3:4274d9103f1d | 1418 | |
cparata | 3:4274d9103f1d | 1419 | return 0; |
cparata | 0:6d69e896ce38 | 1420 | } |
cparata | 0:6d69e896ce38 | 1421 | |
cparata | 0:6d69e896ce38 | 1422 | /** |
cparata | 0:6d69e896ce38 | 1423 | * @brief Set wake up duration |
cparata | 0:6d69e896ce38 | 1424 | * @param dur wake up detection duration |
cparata | 0:6d69e896ce38 | 1425 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1426 | */ |
cparata | 0:6d69e896ce38 | 1427 | int LSM6DSOSensor::set_wake_up_duration(uint8_t dur) |
cparata | 0:6d69e896ce38 | 1428 | { |
cparata | 3:4274d9103f1d | 1429 | /* Set wake up duration. */ |
cparata | 3:4274d9103f1d | 1430 | if (lsm6dso_wkup_dur_set(&_reg_ctx, dur) != 0) { |
cparata | 3:4274d9103f1d | 1431 | return 1; |
cparata | 3:4274d9103f1d | 1432 | } |
cparata | 3:4274d9103f1d | 1433 | |
cparata | 3:4274d9103f1d | 1434 | return 0; |
cparata | 0:6d69e896ce38 | 1435 | } |
cparata | 0:6d69e896ce38 | 1436 | |
cparata | 0:6d69e896ce38 | 1437 | /** |
cparata | 0:6d69e896ce38 | 1438 | * @brief Enable single tap detection |
cparata | 0:6d69e896ce38 | 1439 | * @param int_pin interrupt pin line to be used |
cparata | 0:6d69e896ce38 | 1440 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1441 | */ |
cparata | 0:6d69e896ce38 | 1442 | int LSM6DSOSensor::enable_single_tap_detection(LSM6DSO_Interrupt_Pin_t int_pin) |
cparata | 0:6d69e896ce38 | 1443 | { |
cparata | 3:4274d9103f1d | 1444 | int ret = 0; |
cparata | 3:4274d9103f1d | 1445 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1446 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1447 | |
cparata | 3:4274d9103f1d | 1448 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 1449 | if (set_x_odr(416.0f) != 0) { |
cparata | 3:4274d9103f1d | 1450 | return 1; |
cparata | 3:4274d9103f1d | 1451 | } |
cparata | 3:4274d9103f1d | 1452 | |
cparata | 3:4274d9103f1d | 1453 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 1454 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 1455 | return 1; |
cparata | 3:4274d9103f1d | 1456 | } |
cparata | 3:4274d9103f1d | 1457 | |
cparata | 3:4274d9103f1d | 1458 | /* Enable X direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1459 | if (lsm6dso_tap_detection_on_x_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 1460 | return 1; |
cparata | 3:4274d9103f1d | 1461 | } |
cparata | 3:4274d9103f1d | 1462 | |
cparata | 3:4274d9103f1d | 1463 | /* Enable Y direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1464 | if (lsm6dso_tap_detection_on_y_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 1465 | return 1; |
cparata | 3:4274d9103f1d | 1466 | } |
cparata | 3:4274d9103f1d | 1467 | |
cparata | 3:4274d9103f1d | 1468 | /* Enable Z direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1469 | if (lsm6dso_tap_detection_on_z_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 1470 | return 1; |
cparata | 3:4274d9103f1d | 1471 | } |
cparata | 3:4274d9103f1d | 1472 | |
cparata | 3:4274d9103f1d | 1473 | /* Set tap threshold. */ |
cparata | 3:4274d9103f1d | 1474 | if (lsm6dso_tap_threshold_x_set(&_reg_ctx, 0x08) != 0) { |
cparata | 3:4274d9103f1d | 1475 | return 1; |
cparata | 3:4274d9103f1d | 1476 | } |
cparata | 3:4274d9103f1d | 1477 | |
cparata | 3:4274d9103f1d | 1478 | /* Set tap shock time window. */ |
cparata | 3:4274d9103f1d | 1479 | if (lsm6dso_tap_shock_set(&_reg_ctx, 0x02) != 0) { |
cparata | 0:6d69e896ce38 | 1480 | return 1; |
cparata | 3:4274d9103f1d | 1481 | } |
cparata | 3:4274d9103f1d | 1482 | |
cparata | 3:4274d9103f1d | 1483 | /* Set tap quiet time window. */ |
cparata | 3:4274d9103f1d | 1484 | if (lsm6dso_tap_quiet_set(&_reg_ctx, 0x01) != 0) { |
cparata | 0:6d69e896ce38 | 1485 | return 1; |
cparata | 3:4274d9103f1d | 1486 | } |
cparata | 3:4274d9103f1d | 1487 | |
cparata | 3:4274d9103f1d | 1488 | /* _NOTE_: Tap duration time window - don't care for single tap. */ |
cparata | 3:4274d9103f1d | 1489 | |
cparata | 3:4274d9103f1d | 1490 | /* _NOTE_: Single/Double Tap event - don't care of this flag for single tap. */ |
cparata | 3:4274d9103f1d | 1491 | |
cparata | 3:4274d9103f1d | 1492 | /* Enable single tap event on either INT1 or INT2 pin */ |
cparata | 3:4274d9103f1d | 1493 | switch (int_pin) { |
cparata | 3:4274d9103f1d | 1494 | case LSM6DSO_INT1_PIN: |
cparata | 3:4274d9103f1d | 1495 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1496 | return 1; |
cparata | 3:4274d9103f1d | 1497 | } |
cparata | 3:4274d9103f1d | 1498 | |
cparata | 3:4274d9103f1d | 1499 | val1.md1_cfg.int1_single_tap = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1500 | |
cparata | 3:4274d9103f1d | 1501 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1502 | return 1; |
cparata | 3:4274d9103f1d | 1503 | } |
cparata | 3:4274d9103f1d | 1504 | break; |
cparata | 3:4274d9103f1d | 1505 | |
cparata | 3:4274d9103f1d | 1506 | case LSM6DSO_INT2_PIN: |
cparata | 3:4274d9103f1d | 1507 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1508 | return 1; |
cparata | 3:4274d9103f1d | 1509 | } |
cparata | 3:4274d9103f1d | 1510 | |
cparata | 3:4274d9103f1d | 1511 | val2.md2_cfg.int2_single_tap = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1512 | |
cparata | 3:4274d9103f1d | 1513 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1514 | return 1; |
cparata | 3:4274d9103f1d | 1515 | } |
cparata | 3:4274d9103f1d | 1516 | break; |
cparata | 3:4274d9103f1d | 1517 | |
cparata | 3:4274d9103f1d | 1518 | default: |
cparata | 3:4274d9103f1d | 1519 | ret = 1; |
cparata | 3:4274d9103f1d | 1520 | break; |
cparata | 3:4274d9103f1d | 1521 | } |
cparata | 3:4274d9103f1d | 1522 | |
cparata | 3:4274d9103f1d | 1523 | return ret; |
cparata | 0:6d69e896ce38 | 1524 | } |
cparata | 0:6d69e896ce38 | 1525 | |
cparata | 0:6d69e896ce38 | 1526 | /** |
cparata | 0:6d69e896ce38 | 1527 | * @brief Disable single tap detection |
cparata | 0:6d69e896ce38 | 1528 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1529 | */ |
cparata | 0:6d69e896ce38 | 1530 | int LSM6DSOSensor::disable_single_tap_detection() |
cparata | 0:6d69e896ce38 | 1531 | { |
cparata | 0:6d69e896ce38 | 1532 | lsm6dso_pin_int1_route_t val1; |
cparata | 0:6d69e896ce38 | 1533 | lsm6dso_pin_int2_route_t val2; |
cparata | 0:6d69e896ce38 | 1534 | |
cparata | 3:4274d9103f1d | 1535 | /* Disable single tap event on both INT1 and INT2 pins */ |
cparata | 3:4274d9103f1d | 1536 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1537 | return 1; |
cparata | 3:4274d9103f1d | 1538 | } |
cparata | 3:4274d9103f1d | 1539 | |
cparata | 3:4274d9103f1d | 1540 | val1.md1_cfg.int1_single_tap = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1541 | |
cparata | 3:4274d9103f1d | 1542 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1543 | return 1; |
cparata | 3:4274d9103f1d | 1544 | } |
cparata | 3:4274d9103f1d | 1545 | |
cparata | 3:4274d9103f1d | 1546 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1547 | return 1; |
cparata | 3:4274d9103f1d | 1548 | } |
cparata | 3:4274d9103f1d | 1549 | |
cparata | 3:4274d9103f1d | 1550 | val2.md2_cfg.int2_single_tap = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1551 | |
cparata | 3:4274d9103f1d | 1552 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1553 | return 1; |
cparata | 3:4274d9103f1d | 1554 | } |
cparata | 3:4274d9103f1d | 1555 | |
cparata | 3:4274d9103f1d | 1556 | /* Reset tap quiet time window. */ |
cparata | 3:4274d9103f1d | 1557 | if (lsm6dso_tap_quiet_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1558 | return 1; |
cparata | 3:4274d9103f1d | 1559 | } |
cparata | 3:4274d9103f1d | 1560 | |
cparata | 3:4274d9103f1d | 1561 | /* Reset tap shock time window. */ |
cparata | 3:4274d9103f1d | 1562 | if (lsm6dso_tap_shock_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1563 | return 1; |
cparata | 3:4274d9103f1d | 1564 | } |
cparata | 3:4274d9103f1d | 1565 | |
cparata | 3:4274d9103f1d | 1566 | /* Reset tap threshold. */ |
cparata | 3:4274d9103f1d | 1567 | if (lsm6dso_tap_threshold_x_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1568 | return 1; |
cparata | 3:4274d9103f1d | 1569 | } |
cparata | 3:4274d9103f1d | 1570 | |
cparata | 3:4274d9103f1d | 1571 | /* Disable Z direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1572 | if (lsm6dso_tap_detection_on_z_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1573 | return 1; |
cparata | 3:4274d9103f1d | 1574 | } |
cparata | 3:4274d9103f1d | 1575 | |
cparata | 3:4274d9103f1d | 1576 | /* Disable Y direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1577 | if (lsm6dso_tap_detection_on_y_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1578 | return 1; |
cparata | 3:4274d9103f1d | 1579 | } |
cparata | 3:4274d9103f1d | 1580 | |
cparata | 3:4274d9103f1d | 1581 | /* Disable X direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1582 | if (lsm6dso_tap_detection_on_x_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1583 | return 1; |
cparata | 3:4274d9103f1d | 1584 | } |
cparata | 3:4274d9103f1d | 1585 | |
cparata | 3:4274d9103f1d | 1586 | return 0; |
cparata | 0:6d69e896ce38 | 1587 | } |
cparata | 0:6d69e896ce38 | 1588 | |
cparata | 0:6d69e896ce38 | 1589 | /** |
cparata | 0:6d69e896ce38 | 1590 | * @brief Enable double tap detection |
cparata | 0:6d69e896ce38 | 1591 | * @param int_pin interrupt pin line to be used |
cparata | 0:6d69e896ce38 | 1592 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1593 | */ |
cparata | 0:6d69e896ce38 | 1594 | int LSM6DSOSensor::enable_double_tap_detection(LSM6DSO_Interrupt_Pin_t int_pin) |
cparata | 0:6d69e896ce38 | 1595 | { |
cparata | 3:4274d9103f1d | 1596 | int ret = 0; |
cparata | 3:4274d9103f1d | 1597 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1598 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1599 | |
cparata | 3:4274d9103f1d | 1600 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 1601 | if (set_x_odr(416.0f) != 0) { |
cparata | 3:4274d9103f1d | 1602 | return 1; |
cparata | 3:4274d9103f1d | 1603 | } |
cparata | 3:4274d9103f1d | 1604 | |
cparata | 3:4274d9103f1d | 1605 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 1606 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 1607 | return 1; |
cparata | 3:4274d9103f1d | 1608 | } |
cparata | 3:4274d9103f1d | 1609 | |
cparata | 3:4274d9103f1d | 1610 | /* Enable X direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1611 | if (lsm6dso_tap_detection_on_x_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 1612 | return 1; |
cparata | 3:4274d9103f1d | 1613 | } |
cparata | 3:4274d9103f1d | 1614 | |
cparata | 3:4274d9103f1d | 1615 | /* Enable Y direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1616 | if (lsm6dso_tap_detection_on_y_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 1617 | return 1; |
cparata | 3:4274d9103f1d | 1618 | } |
cparata | 3:4274d9103f1d | 1619 | |
cparata | 3:4274d9103f1d | 1620 | /* Enable Z direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1621 | if (lsm6dso_tap_detection_on_z_set(&_reg_ctx, PROPERTY_ENABLE) != 0) { |
cparata | 3:4274d9103f1d | 1622 | return 1; |
cparata | 3:4274d9103f1d | 1623 | } |
cparata | 3:4274d9103f1d | 1624 | |
cparata | 3:4274d9103f1d | 1625 | /* Set tap threshold. */ |
cparata | 3:4274d9103f1d | 1626 | if (lsm6dso_tap_threshold_x_set(&_reg_ctx, 0x08) != 0) { |
cparata | 3:4274d9103f1d | 1627 | return 1; |
cparata | 3:4274d9103f1d | 1628 | } |
cparata | 3:4274d9103f1d | 1629 | |
cparata | 3:4274d9103f1d | 1630 | /* Set tap shock time window. */ |
cparata | 3:4274d9103f1d | 1631 | if (lsm6dso_tap_shock_set(&_reg_ctx, 0x03) != 0) { |
cparata | 3:4274d9103f1d | 1632 | return 1; |
cparata | 3:4274d9103f1d | 1633 | } |
cparata | 3:4274d9103f1d | 1634 | |
cparata | 3:4274d9103f1d | 1635 | /* Set tap quiet time window. */ |
cparata | 3:4274d9103f1d | 1636 | if (lsm6dso_tap_quiet_set(&_reg_ctx, 0x03) != 0) { |
cparata | 0:6d69e896ce38 | 1637 | return 1; |
cparata | 3:4274d9103f1d | 1638 | } |
cparata | 3:4274d9103f1d | 1639 | |
cparata | 3:4274d9103f1d | 1640 | /* Set tap duration time window. */ |
cparata | 3:4274d9103f1d | 1641 | if (lsm6dso_tap_dur_set(&_reg_ctx, 0x08) != 0) { |
cparata | 0:6d69e896ce38 | 1642 | return 1; |
cparata | 3:4274d9103f1d | 1643 | } |
cparata | 3:4274d9103f1d | 1644 | |
cparata | 3:4274d9103f1d | 1645 | /* Single and double tap enabled. */ |
cparata | 3:4274d9103f1d | 1646 | if (lsm6dso_tap_mode_set(&_reg_ctx, LSM6DSO_BOTH_SINGLE_DOUBLE) != 0) { |
cparata | 0:6d69e896ce38 | 1647 | return 1; |
cparata | 3:4274d9103f1d | 1648 | } |
cparata | 3:4274d9103f1d | 1649 | |
cparata | 3:4274d9103f1d | 1650 | /* Enable double tap event on either INT1 or INT2 pin */ |
cparata | 3:4274d9103f1d | 1651 | switch (int_pin) { |
cparata | 3:4274d9103f1d | 1652 | case LSM6DSO_INT1_PIN: |
cparata | 3:4274d9103f1d | 1653 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1654 | return 1; |
cparata | 3:4274d9103f1d | 1655 | } |
cparata | 3:4274d9103f1d | 1656 | |
cparata | 3:4274d9103f1d | 1657 | val1.md1_cfg.int1_double_tap = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1658 | |
cparata | 3:4274d9103f1d | 1659 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1660 | return 1; |
cparata | 3:4274d9103f1d | 1661 | } |
cparata | 3:4274d9103f1d | 1662 | break; |
cparata | 3:4274d9103f1d | 1663 | |
cparata | 3:4274d9103f1d | 1664 | case LSM6DSO_INT2_PIN: |
cparata | 3:4274d9103f1d | 1665 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1666 | return 1; |
cparata | 3:4274d9103f1d | 1667 | } |
cparata | 3:4274d9103f1d | 1668 | |
cparata | 3:4274d9103f1d | 1669 | val2.md2_cfg.int2_double_tap = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1670 | |
cparata | 3:4274d9103f1d | 1671 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1672 | return 1; |
cparata | 3:4274d9103f1d | 1673 | } |
cparata | 3:4274d9103f1d | 1674 | break; |
cparata | 3:4274d9103f1d | 1675 | |
cparata | 3:4274d9103f1d | 1676 | default: |
cparata | 3:4274d9103f1d | 1677 | ret = 1; |
cparata | 3:4274d9103f1d | 1678 | break; |
cparata | 3:4274d9103f1d | 1679 | } |
cparata | 3:4274d9103f1d | 1680 | |
cparata | 3:4274d9103f1d | 1681 | return ret; |
cparata | 0:6d69e896ce38 | 1682 | } |
cparata | 0:6d69e896ce38 | 1683 | |
cparata | 0:6d69e896ce38 | 1684 | /** |
cparata | 0:6d69e896ce38 | 1685 | * @brief Disable double tap detection |
cparata | 0:6d69e896ce38 | 1686 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1687 | */ |
cparata | 0:6d69e896ce38 | 1688 | int LSM6DSOSensor::disable_double_tap_detection() |
cparata | 0:6d69e896ce38 | 1689 | { |
cparata | 3:4274d9103f1d | 1690 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1691 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1692 | |
cparata | 3:4274d9103f1d | 1693 | /* Disable double tap event on both INT1 and INT2 pins */ |
cparata | 3:4274d9103f1d | 1694 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1695 | return 1; |
cparata | 3:4274d9103f1d | 1696 | } |
cparata | 3:4274d9103f1d | 1697 | |
cparata | 3:4274d9103f1d | 1698 | val1.md1_cfg.int1_double_tap = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1699 | |
cparata | 3:4274d9103f1d | 1700 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1701 | return 1; |
cparata | 3:4274d9103f1d | 1702 | } |
cparata | 3:4274d9103f1d | 1703 | |
cparata | 3:4274d9103f1d | 1704 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1705 | return 1; |
cparata | 3:4274d9103f1d | 1706 | } |
cparata | 3:4274d9103f1d | 1707 | |
cparata | 3:4274d9103f1d | 1708 | val2.md2_cfg.int2_double_tap = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1709 | |
cparata | 3:4274d9103f1d | 1710 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1711 | return 1; |
cparata | 3:4274d9103f1d | 1712 | } |
cparata | 3:4274d9103f1d | 1713 | |
cparata | 3:4274d9103f1d | 1714 | /* Only single tap enabled. */ |
cparata | 3:4274d9103f1d | 1715 | if (lsm6dso_tap_mode_set(&_reg_ctx, LSM6DSO_ONLY_SINGLE) != 0) { |
cparata | 3:4274d9103f1d | 1716 | return 1; |
cparata | 3:4274d9103f1d | 1717 | } |
cparata | 3:4274d9103f1d | 1718 | |
cparata | 3:4274d9103f1d | 1719 | /* Reset tap duration time window. */ |
cparata | 3:4274d9103f1d | 1720 | if (lsm6dso_tap_dur_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1721 | return 1; |
cparata | 3:4274d9103f1d | 1722 | } |
cparata | 3:4274d9103f1d | 1723 | |
cparata | 3:4274d9103f1d | 1724 | /* Reset tap quiet time window. */ |
cparata | 3:4274d9103f1d | 1725 | if (lsm6dso_tap_quiet_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1726 | return 1; |
cparata | 3:4274d9103f1d | 1727 | } |
cparata | 3:4274d9103f1d | 1728 | |
cparata | 3:4274d9103f1d | 1729 | /* Reset tap shock time window. */ |
cparata | 3:4274d9103f1d | 1730 | if (lsm6dso_tap_shock_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1731 | return 1; |
cparata | 3:4274d9103f1d | 1732 | } |
cparata | 3:4274d9103f1d | 1733 | |
cparata | 3:4274d9103f1d | 1734 | /* Reset tap threshold. */ |
cparata | 3:4274d9103f1d | 1735 | if (lsm6dso_tap_threshold_x_set(&_reg_ctx, 0x00) != 0) { |
cparata | 3:4274d9103f1d | 1736 | return 1; |
cparata | 3:4274d9103f1d | 1737 | } |
cparata | 3:4274d9103f1d | 1738 | |
cparata | 3:4274d9103f1d | 1739 | /* Disable Z direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1740 | if (lsm6dso_tap_detection_on_z_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1741 | return 1; |
cparata | 3:4274d9103f1d | 1742 | } |
cparata | 3:4274d9103f1d | 1743 | |
cparata | 3:4274d9103f1d | 1744 | /* Disable Y direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1745 | if (lsm6dso_tap_detection_on_y_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1746 | return 1; |
cparata | 3:4274d9103f1d | 1747 | } |
cparata | 3:4274d9103f1d | 1748 | |
cparata | 3:4274d9103f1d | 1749 | /* Disable X direction in tap recognition. */ |
cparata | 3:4274d9103f1d | 1750 | if (lsm6dso_tap_detection_on_x_set(&_reg_ctx, PROPERTY_DISABLE) != 0) { |
cparata | 3:4274d9103f1d | 1751 | return 1; |
cparata | 3:4274d9103f1d | 1752 | } |
cparata | 3:4274d9103f1d | 1753 | |
cparata | 3:4274d9103f1d | 1754 | return 0; |
cparata | 0:6d69e896ce38 | 1755 | } |
cparata | 0:6d69e896ce38 | 1756 | |
cparata | 0:6d69e896ce38 | 1757 | /** |
cparata | 0:6d69e896ce38 | 1758 | * @brief Set tap threshold |
cparata | 0:6d69e896ce38 | 1759 | * @param thr tap threshold |
cparata | 0:6d69e896ce38 | 1760 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1761 | */ |
cparata | 0:6d69e896ce38 | 1762 | int LSM6DSOSensor::set_tap_threshold(uint8_t thr) |
cparata | 0:6d69e896ce38 | 1763 | { |
cparata | 3:4274d9103f1d | 1764 | /* Set tap threshold. */ |
cparata | 3:4274d9103f1d | 1765 | if (lsm6dso_tap_threshold_x_set(&_reg_ctx, thr) != 0) { |
cparata | 3:4274d9103f1d | 1766 | return 1; |
cparata | 3:4274d9103f1d | 1767 | } |
cparata | 3:4274d9103f1d | 1768 | |
cparata | 3:4274d9103f1d | 1769 | return 0; |
cparata | 0:6d69e896ce38 | 1770 | } |
cparata | 0:6d69e896ce38 | 1771 | |
cparata | 0:6d69e896ce38 | 1772 | /** |
cparata | 0:6d69e896ce38 | 1773 | * @brief Set tap shock time |
cparata | 0:6d69e896ce38 | 1774 | * @param time tap shock time |
cparata | 0:6d69e896ce38 | 1775 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1776 | */ |
cparata | 0:6d69e896ce38 | 1777 | int LSM6DSOSensor::set_tap_shock_time(uint8_t time) |
cparata | 0:6d69e896ce38 | 1778 | { |
cparata | 3:4274d9103f1d | 1779 | /* Set tap shock time window. */ |
cparata | 3:4274d9103f1d | 1780 | if (lsm6dso_tap_shock_set(&_reg_ctx, time) != 0) { |
cparata | 3:4274d9103f1d | 1781 | return 1; |
cparata | 3:4274d9103f1d | 1782 | } |
cparata | 3:4274d9103f1d | 1783 | |
cparata | 3:4274d9103f1d | 1784 | return 0; |
cparata | 0:6d69e896ce38 | 1785 | } |
cparata | 0:6d69e896ce38 | 1786 | |
cparata | 0:6d69e896ce38 | 1787 | /** |
cparata | 0:6d69e896ce38 | 1788 | * @brief Set tap quiet time |
cparata | 0:6d69e896ce38 | 1789 | * @param time tap quiet time |
cparata | 0:6d69e896ce38 | 1790 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1791 | */ |
cparata | 0:6d69e896ce38 | 1792 | int LSM6DSOSensor::set_tap_quiet_time(uint8_t time) |
cparata | 0:6d69e896ce38 | 1793 | { |
cparata | 3:4274d9103f1d | 1794 | /* Set tap quiet time window. */ |
cparata | 3:4274d9103f1d | 1795 | if (lsm6dso_tap_quiet_set(&_reg_ctx, time) != 0) { |
cparata | 3:4274d9103f1d | 1796 | return 1; |
cparata | 3:4274d9103f1d | 1797 | } |
cparata | 3:4274d9103f1d | 1798 | |
cparata | 3:4274d9103f1d | 1799 | return 0; |
cparata | 0:6d69e896ce38 | 1800 | } |
cparata | 0:6d69e896ce38 | 1801 | |
cparata | 0:6d69e896ce38 | 1802 | /** |
cparata | 0:6d69e896ce38 | 1803 | * @brief Set tap duration time |
cparata | 0:6d69e896ce38 | 1804 | * @param time tap duration time |
cparata | 0:6d69e896ce38 | 1805 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1806 | */ |
cparata | 0:6d69e896ce38 | 1807 | int LSM6DSOSensor::set_tap_duration_time(uint8_t time) |
cparata | 0:6d69e896ce38 | 1808 | { |
cparata | 3:4274d9103f1d | 1809 | /* Set tap duration time window. */ |
cparata | 3:4274d9103f1d | 1810 | if (lsm6dso_tap_dur_set(&_reg_ctx, time) != 0) { |
cparata | 3:4274d9103f1d | 1811 | return 1; |
cparata | 3:4274d9103f1d | 1812 | } |
cparata | 3:4274d9103f1d | 1813 | |
cparata | 3:4274d9103f1d | 1814 | return 0; |
cparata | 0:6d69e896ce38 | 1815 | } |
cparata | 0:6d69e896ce38 | 1816 | |
cparata | 0:6d69e896ce38 | 1817 | /** |
cparata | 0:6d69e896ce38 | 1818 | * @brief Enable 6D orientation detection |
cparata | 0:6d69e896ce38 | 1819 | * @param int_pin interrupt pin line to be used |
cparata | 0:6d69e896ce38 | 1820 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1821 | */ |
cparata | 0:6d69e896ce38 | 1822 | int LSM6DSOSensor::enable_6d_orientation(LSM6DSO_Interrupt_Pin_t int_pin) |
cparata | 0:6d69e896ce38 | 1823 | { |
cparata | 3:4274d9103f1d | 1824 | int ret = 0; |
cparata | 3:4274d9103f1d | 1825 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1826 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1827 | |
cparata | 3:4274d9103f1d | 1828 | /* Output Data Rate selection */ |
cparata | 3:4274d9103f1d | 1829 | if (set_x_odr(416.0f) != 0) { |
cparata | 3:4274d9103f1d | 1830 | return 1; |
cparata | 3:4274d9103f1d | 1831 | } |
cparata | 3:4274d9103f1d | 1832 | |
cparata | 3:4274d9103f1d | 1833 | /* Full scale selection */ |
cparata | 3:4274d9103f1d | 1834 | if (set_x_fs(2.0f) != 0) { |
cparata | 3:4274d9103f1d | 1835 | return 1; |
cparata | 3:4274d9103f1d | 1836 | } |
cparata | 3:4274d9103f1d | 1837 | |
cparata | 3:4274d9103f1d | 1838 | /* 6D orientation enabled. */ |
cparata | 3:4274d9103f1d | 1839 | if (lsm6dso_6d_threshold_set(&_reg_ctx, LSM6DSO_DEG_60) != 0) { |
cparata | 0:6d69e896ce38 | 1840 | return 1; |
cparata | 3:4274d9103f1d | 1841 | } |
cparata | 3:4274d9103f1d | 1842 | |
cparata | 3:4274d9103f1d | 1843 | /* Enable 6D orientation event on either INT1 or INT2 pin */ |
cparata | 3:4274d9103f1d | 1844 | switch (int_pin) { |
cparata | 3:4274d9103f1d | 1845 | case LSM6DSO_INT1_PIN: |
cparata | 3:4274d9103f1d | 1846 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1847 | return 1; |
cparata | 3:4274d9103f1d | 1848 | } |
cparata | 3:4274d9103f1d | 1849 | |
cparata | 3:4274d9103f1d | 1850 | val1.md1_cfg.int1_6d = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1851 | |
cparata | 3:4274d9103f1d | 1852 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1853 | return 1; |
cparata | 3:4274d9103f1d | 1854 | } |
cparata | 3:4274d9103f1d | 1855 | break; |
cparata | 3:4274d9103f1d | 1856 | |
cparata | 3:4274d9103f1d | 1857 | case LSM6DSO_INT2_PIN: |
cparata | 3:4274d9103f1d | 1858 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1859 | return 1; |
cparata | 3:4274d9103f1d | 1860 | } |
cparata | 3:4274d9103f1d | 1861 | |
cparata | 3:4274d9103f1d | 1862 | val2.md2_cfg.int2_6d = PROPERTY_ENABLE; |
cparata | 3:4274d9103f1d | 1863 | |
cparata | 3:4274d9103f1d | 1864 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1865 | return 1; |
cparata | 3:4274d9103f1d | 1866 | } |
cparata | 3:4274d9103f1d | 1867 | break; |
cparata | 3:4274d9103f1d | 1868 | |
cparata | 3:4274d9103f1d | 1869 | default: |
cparata | 3:4274d9103f1d | 1870 | ret = 1; |
cparata | 3:4274d9103f1d | 1871 | break; |
cparata | 3:4274d9103f1d | 1872 | } |
cparata | 3:4274d9103f1d | 1873 | |
cparata | 3:4274d9103f1d | 1874 | return ret; |
cparata | 0:6d69e896ce38 | 1875 | } |
cparata | 0:6d69e896ce38 | 1876 | |
cparata | 0:6d69e896ce38 | 1877 | /** |
cparata | 0:6d69e896ce38 | 1878 | * @brief Disable 6D orientation detection |
cparata | 0:6d69e896ce38 | 1879 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1880 | */ |
cparata | 0:6d69e896ce38 | 1881 | int LSM6DSOSensor::disable_6d_orientation() |
cparata | 0:6d69e896ce38 | 1882 | { |
cparata | 3:4274d9103f1d | 1883 | lsm6dso_pin_int1_route_t val1; |
cparata | 3:4274d9103f1d | 1884 | lsm6dso_pin_int2_route_t val2; |
cparata | 3:4274d9103f1d | 1885 | |
cparata | 3:4274d9103f1d | 1886 | /* Disable 6D orientation event on both INT1 and INT2 pins */ |
cparata | 3:4274d9103f1d | 1887 | if (lsm6dso_pin_int1_route_get(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1888 | return 1; |
cparata | 3:4274d9103f1d | 1889 | } |
cparata | 3:4274d9103f1d | 1890 | |
cparata | 3:4274d9103f1d | 1891 | val1.md1_cfg.int1_6d = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1892 | |
cparata | 3:4274d9103f1d | 1893 | if (lsm6dso_pin_int1_route_set(&_reg_ctx, &val1) != 0) { |
cparata | 3:4274d9103f1d | 1894 | return 1; |
cparata | 3:4274d9103f1d | 1895 | } |
cparata | 3:4274d9103f1d | 1896 | |
cparata | 3:4274d9103f1d | 1897 | if (lsm6dso_pin_int2_route_get(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1898 | return 1; |
cparata | 3:4274d9103f1d | 1899 | } |
cparata | 3:4274d9103f1d | 1900 | |
cparata | 3:4274d9103f1d | 1901 | val2.md2_cfg.int2_6d = PROPERTY_DISABLE; |
cparata | 3:4274d9103f1d | 1902 | |
cparata | 3:4274d9103f1d | 1903 | if (lsm6dso_pin_int2_route_set(&_reg_ctx, &val2) != 0) { |
cparata | 3:4274d9103f1d | 1904 | return 1; |
cparata | 3:4274d9103f1d | 1905 | } |
cparata | 3:4274d9103f1d | 1906 | |
cparata | 3:4274d9103f1d | 1907 | /* Reset 6D orientation. */ |
cparata | 3:4274d9103f1d | 1908 | if (lsm6dso_6d_threshold_set(&_reg_ctx, LSM6DSO_DEG_80) != 0) { |
cparata | 3:4274d9103f1d | 1909 | return 1; |
cparata | 3:4274d9103f1d | 1910 | } |
cparata | 3:4274d9103f1d | 1911 | |
cparata | 3:4274d9103f1d | 1912 | return 0; |
cparata | 0:6d69e896ce38 | 1913 | } |
cparata | 0:6d69e896ce38 | 1914 | |
cparata | 0:6d69e896ce38 | 1915 | /** |
cparata | 0:6d69e896ce38 | 1916 | * @brief Set 6D orientation threshold |
cparata | 0:6d69e896ce38 | 1917 | * @param thr 6D Orientation detection threshold |
cparata | 0:6d69e896ce38 | 1918 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1919 | */ |
cparata | 0:6d69e896ce38 | 1920 | int LSM6DSOSensor::set_6d_orientation_threshold(uint8_t thr) |
cparata | 0:6d69e896ce38 | 1921 | { |
cparata | 3:4274d9103f1d | 1922 | if (lsm6dso_6d_threshold_set(&_reg_ctx, (lsm6dso_sixd_ths_t)thr) != 0) { |
cparata | 3:4274d9103f1d | 1923 | return 1; |
cparata | 3:4274d9103f1d | 1924 | } |
cparata | 3:4274d9103f1d | 1925 | |
cparata | 3:4274d9103f1d | 1926 | return 0; |
cparata | 0:6d69e896ce38 | 1927 | } |
cparata | 0:6d69e896ce38 | 1928 | |
cparata | 0:6d69e896ce38 | 1929 | /** |
cparata | 0:6d69e896ce38 | 1930 | * @brief Get the status of XLow orientation |
cparata | 0:6d69e896ce38 | 1931 | * @param xl the status of XLow orientation |
cparata | 0:6d69e896ce38 | 1932 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1933 | */ |
cparata | 0:6d69e896ce38 | 1934 | int LSM6DSOSensor::get_6d_orientation_xl(uint8_t *xl) |
cparata | 0:6d69e896ce38 | 1935 | { |
cparata | 3:4274d9103f1d | 1936 | lsm6dso_d6d_src_t data; |
cparata | 3:4274d9103f1d | 1937 | |
cparata | 3:4274d9103f1d | 1938 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&data, 1) != 0) { |
cparata | 3:4274d9103f1d | 1939 | return 1; |
cparata | 3:4274d9103f1d | 1940 | } |
cparata | 3:4274d9103f1d | 1941 | |
cparata | 3:4274d9103f1d | 1942 | *xl = data.xl; |
cparata | 3:4274d9103f1d | 1943 | |
cparata | 3:4274d9103f1d | 1944 | return 0; |
cparata | 0:6d69e896ce38 | 1945 | } |
cparata | 0:6d69e896ce38 | 1946 | |
cparata | 0:6d69e896ce38 | 1947 | /** |
cparata | 0:6d69e896ce38 | 1948 | * @brief Get the status of XHigh orientation |
cparata | 0:6d69e896ce38 | 1949 | * @param xh the status of XHigh orientation |
cparata | 0:6d69e896ce38 | 1950 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1951 | */ |
cparata | 0:6d69e896ce38 | 1952 | int LSM6DSOSensor::get_6d_orientation_xh(uint8_t *xh) |
cparata | 0:6d69e896ce38 | 1953 | { |
cparata | 3:4274d9103f1d | 1954 | lsm6dso_d6d_src_t data; |
cparata | 3:4274d9103f1d | 1955 | |
cparata | 3:4274d9103f1d | 1956 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&data, 1) != 0) { |
cparata | 3:4274d9103f1d | 1957 | return 1; |
cparata | 3:4274d9103f1d | 1958 | } |
cparata | 3:4274d9103f1d | 1959 | |
cparata | 3:4274d9103f1d | 1960 | *xh = data.xh; |
cparata | 3:4274d9103f1d | 1961 | |
cparata | 3:4274d9103f1d | 1962 | return 0; |
cparata | 0:6d69e896ce38 | 1963 | } |
cparata | 0:6d69e896ce38 | 1964 | |
cparata | 0:6d69e896ce38 | 1965 | /** |
cparata | 0:6d69e896ce38 | 1966 | * @brief Get the status of YLow orientation |
cparata | 0:6d69e896ce38 | 1967 | * @param yl the status of YLow orientation |
cparata | 0:6d69e896ce38 | 1968 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1969 | */ |
cparata | 0:6d69e896ce38 | 1970 | int LSM6DSOSensor::get_6d_orientation_yl(uint8_t *yl) |
cparata | 0:6d69e896ce38 | 1971 | { |
cparata | 3:4274d9103f1d | 1972 | lsm6dso_d6d_src_t data; |
cparata | 3:4274d9103f1d | 1973 | |
cparata | 3:4274d9103f1d | 1974 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&data, 1) != 0) { |
cparata | 3:4274d9103f1d | 1975 | return 1; |
cparata | 3:4274d9103f1d | 1976 | } |
cparata | 3:4274d9103f1d | 1977 | |
cparata | 3:4274d9103f1d | 1978 | *yl = data.yl; |
cparata | 3:4274d9103f1d | 1979 | |
cparata | 3:4274d9103f1d | 1980 | return 0; |
cparata | 0:6d69e896ce38 | 1981 | } |
cparata | 0:6d69e896ce38 | 1982 | |
cparata | 0:6d69e896ce38 | 1983 | /** |
cparata | 0:6d69e896ce38 | 1984 | * @brief Get the status of YHigh orientation |
cparata | 0:6d69e896ce38 | 1985 | * @param yh the status of YHigh orientation |
cparata | 0:6d69e896ce38 | 1986 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 1987 | */ |
cparata | 0:6d69e896ce38 | 1988 | int LSM6DSOSensor::get_6d_orientation_yh(uint8_t *yh) |
cparata | 0:6d69e896ce38 | 1989 | { |
cparata | 3:4274d9103f1d | 1990 | lsm6dso_d6d_src_t data; |
cparata | 3:4274d9103f1d | 1991 | |
cparata | 3:4274d9103f1d | 1992 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&data, 1) != 0) { |
cparata | 3:4274d9103f1d | 1993 | return 1; |
cparata | 3:4274d9103f1d | 1994 | } |
cparata | 3:4274d9103f1d | 1995 | |
cparata | 3:4274d9103f1d | 1996 | *yh = data.yh; |
cparata | 3:4274d9103f1d | 1997 | |
cparata | 3:4274d9103f1d | 1998 | return 0; |
cparata | 0:6d69e896ce38 | 1999 | } |
cparata | 0:6d69e896ce38 | 2000 | |
cparata | 0:6d69e896ce38 | 2001 | /** |
cparata | 0:6d69e896ce38 | 2002 | * @brief Get the status of ZLow orientation |
cparata | 0:6d69e896ce38 | 2003 | * @param zl the status of ZLow orientation |
cparata | 0:6d69e896ce38 | 2004 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2005 | */ |
cparata | 0:6d69e896ce38 | 2006 | int LSM6DSOSensor::get_6d_orientation_zl(uint8_t *zl) |
cparata | 0:6d69e896ce38 | 2007 | { |
cparata | 3:4274d9103f1d | 2008 | lsm6dso_d6d_src_t data; |
cparata | 3:4274d9103f1d | 2009 | |
cparata | 3:4274d9103f1d | 2010 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&data, 1) != 0) { |
cparata | 3:4274d9103f1d | 2011 | return 1; |
cparata | 3:4274d9103f1d | 2012 | } |
cparata | 3:4274d9103f1d | 2013 | |
cparata | 3:4274d9103f1d | 2014 | *zl = data.zl; |
cparata | 3:4274d9103f1d | 2015 | |
cparata | 3:4274d9103f1d | 2016 | return 0; |
cparata | 0:6d69e896ce38 | 2017 | } |
cparata | 0:6d69e896ce38 | 2018 | |
cparata | 0:6d69e896ce38 | 2019 | /** |
cparata | 0:6d69e896ce38 | 2020 | * @brief Get the status of ZHigh orientation |
cparata | 0:6d69e896ce38 | 2021 | * @param zh the status of ZHigh orientation |
cparata | 0:6d69e896ce38 | 2022 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2023 | */ |
cparata | 0:6d69e896ce38 | 2024 | int LSM6DSOSensor::get_6d_orientation_zh(uint8_t *zh) |
cparata | 0:6d69e896ce38 | 2025 | { |
cparata | 3:4274d9103f1d | 2026 | lsm6dso_d6d_src_t data; |
cparata | 3:4274d9103f1d | 2027 | |
cparata | 3:4274d9103f1d | 2028 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&data, 1) != 0) { |
cparata | 3:4274d9103f1d | 2029 | return 1; |
cparata | 3:4274d9103f1d | 2030 | } |
cparata | 3:4274d9103f1d | 2031 | |
cparata | 3:4274d9103f1d | 2032 | *zh = data.zh; |
cparata | 3:4274d9103f1d | 2033 | |
cparata | 3:4274d9103f1d | 2034 | return 0; |
cparata | 0:6d69e896ce38 | 2035 | } |
cparata | 0:6d69e896ce38 | 2036 | |
cparata | 0:6d69e896ce38 | 2037 | /** |
cparata | 0:6d69e896ce38 | 2038 | * @brief Get the LSM6DSO ACC data ready bit value |
cparata | 0:6d69e896ce38 | 2039 | * @param status the status of data ready bit |
cparata | 0:6d69e896ce38 | 2040 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2041 | */ |
cparata | 0:6d69e896ce38 | 2042 | int LSM6DSOSensor::get_x_drdy_status(uint8_t *status) |
cparata | 0:6d69e896ce38 | 2043 | { |
cparata | 3:4274d9103f1d | 2044 | if (lsm6dso_xl_flag_data_ready_get(&_reg_ctx, status) != 0) { |
cparata | 3:4274d9103f1d | 2045 | return 1; |
cparata | 3:4274d9103f1d | 2046 | } |
cparata | 3:4274d9103f1d | 2047 | |
cparata | 3:4274d9103f1d | 2048 | return 0; |
cparata | 0:6d69e896ce38 | 2049 | } |
cparata | 0:6d69e896ce38 | 2050 | |
cparata | 0:6d69e896ce38 | 2051 | /** |
cparata | 0:6d69e896ce38 | 2052 | * @brief Get the status of all hardware events |
cparata | 0:6d69e896ce38 | 2053 | * @param status the status of all hardware events |
cparata | 0:6d69e896ce38 | 2054 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2055 | */ |
cparata | 0:6d69e896ce38 | 2056 | int LSM6DSOSensor::get_event_status(LSM6DSO_Event_Status_t *status) |
cparata | 0:6d69e896ce38 | 2057 | { |
cparata | 3:4274d9103f1d | 2058 | uint8_t tilt_ia = 0U; |
cparata | 3:4274d9103f1d | 2059 | lsm6dso_wake_up_src_t wake_up_src; |
cparata | 3:4274d9103f1d | 2060 | lsm6dso_tap_src_t tap_src; |
cparata | 3:4274d9103f1d | 2061 | lsm6dso_d6d_src_t d6d_src; |
cparata | 3:4274d9103f1d | 2062 | lsm6dso_emb_func_src_t func_src; |
cparata | 3:4274d9103f1d | 2063 | lsm6dso_md1_cfg_t md1_cfg; |
cparata | 3:4274d9103f1d | 2064 | lsm6dso_md2_cfg_t md2_cfg; |
cparata | 3:4274d9103f1d | 2065 | lsm6dso_emb_func_int1_t int1_ctrl; |
cparata | 3:4274d9103f1d | 2066 | lsm6dso_emb_func_int2_t int2_ctrl; |
cparata | 3:4274d9103f1d | 2067 | |
cparata | 3:4274d9103f1d | 2068 | (void)memset((void *)status, 0x0, sizeof(LSM6DSO_Event_Status_t)); |
cparata | 3:4274d9103f1d | 2069 | |
cparata | 3:4274d9103f1d | 2070 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_WAKE_UP_SRC, (uint8_t *)&wake_up_src, 1) != 0) { |
cparata | 3:4274d9103f1d | 2071 | return 1; |
cparata | 3:4274d9103f1d | 2072 | } |
cparata | 3:4274d9103f1d | 2073 | |
cparata | 3:4274d9103f1d | 2074 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_TAP_SRC, (uint8_t *)&tap_src, 1) != 0) { |
cparata | 3:4274d9103f1d | 2075 | return 1; |
cparata | 3:4274d9103f1d | 2076 | } |
cparata | 3:4274d9103f1d | 2077 | |
cparata | 3:4274d9103f1d | 2078 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_D6D_SRC, (uint8_t *)&d6d_src, 1) != 0) { |
cparata | 3:4274d9103f1d | 2079 | return 1; |
cparata | 3:4274d9103f1d | 2080 | } |
cparata | 3:4274d9103f1d | 2081 | |
cparata | 3:4274d9103f1d | 2082 | if (lsm6dso_mem_bank_set(&_reg_ctx, LSM6DSO_EMBEDDED_FUNC_BANK) != 0) { |
cparata | 3:4274d9103f1d | 2083 | return 1; |
cparata | 3:4274d9103f1d | 2084 | } |
cparata | 3:4274d9103f1d | 2085 | |
cparata | 3:4274d9103f1d | 2086 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_EMB_FUNC_SRC, (uint8_t *)&func_src, 1) != 0) { |
cparata | 3:4274d9103f1d | 2087 | return 1; |
cparata | 3:4274d9103f1d | 2088 | } |
cparata | 3:4274d9103f1d | 2089 | |
cparata | 3:4274d9103f1d | 2090 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_EMB_FUNC_INT1, (uint8_t *)&int1_ctrl, 1) != 0) { |
cparata | 3:4274d9103f1d | 2091 | return 1; |
cparata | 3:4274d9103f1d | 2092 | } |
cparata | 3:4274d9103f1d | 2093 | |
cparata | 3:4274d9103f1d | 2094 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_EMB_FUNC_INT2, (uint8_t *)&int2_ctrl, 1) != 0) { |
cparata | 3:4274d9103f1d | 2095 | return 1; |
cparata | 3:4274d9103f1d | 2096 | } |
cparata | 3:4274d9103f1d | 2097 | |
cparata | 3:4274d9103f1d | 2098 | if (lsm6dso_mem_bank_set(&_reg_ctx, LSM6DSO_USER_BANK) != 0) { |
cparata | 3:4274d9103f1d | 2099 | return 1; |
cparata | 3:4274d9103f1d | 2100 | } |
cparata | 3:4274d9103f1d | 2101 | |
cparata | 3:4274d9103f1d | 2102 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_MD1_CFG, (uint8_t *)&md1_cfg, 1) != 0) { |
cparata | 3:4274d9103f1d | 2103 | return 1; |
cparata | 0:6d69e896ce38 | 2104 | } |
cparata | 3:4274d9103f1d | 2105 | |
cparata | 3:4274d9103f1d | 2106 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_MD2_CFG, (uint8_t *)&md2_cfg, 1) != 0) { |
cparata | 3:4274d9103f1d | 2107 | return 1; |
cparata | 3:4274d9103f1d | 2108 | } |
cparata | 3:4274d9103f1d | 2109 | |
cparata | 3:4274d9103f1d | 2110 | if (lsm6dso_tilt_flag_data_ready_get(&_reg_ctx, &tilt_ia) != 0) { |
cparata | 3:4274d9103f1d | 2111 | return 1; |
cparata | 0:6d69e896ce38 | 2112 | } |
cparata | 3:4274d9103f1d | 2113 | |
cparata | 3:4274d9103f1d | 2114 | if ((md1_cfg.int1_ff == 1U) || (md2_cfg.int2_ff == 1U)) { |
cparata | 3:4274d9103f1d | 2115 | if (wake_up_src.ff_ia == 1U) { |
cparata | 3:4274d9103f1d | 2116 | status->FreeFallStatus = 1; |
cparata | 3:4274d9103f1d | 2117 | } |
cparata | 0:6d69e896ce38 | 2118 | } |
cparata | 3:4274d9103f1d | 2119 | |
cparata | 3:4274d9103f1d | 2120 | if ((md1_cfg.int1_wu == 1U) || (md2_cfg.int2_wu == 1U)) { |
cparata | 3:4274d9103f1d | 2121 | if (wake_up_src.wu_ia == 1U) { |
cparata | 3:4274d9103f1d | 2122 | status->WakeUpStatus = 1; |
cparata | 3:4274d9103f1d | 2123 | } |
cparata | 3:4274d9103f1d | 2124 | } |
cparata | 3:4274d9103f1d | 2125 | |
cparata | 3:4274d9103f1d | 2126 | if ((md1_cfg.int1_single_tap == 1U) || (md2_cfg.int2_single_tap == 1U)) { |
cparata | 3:4274d9103f1d | 2127 | if (tap_src.single_tap == 1U) { |
cparata | 3:4274d9103f1d | 2128 | status->TapStatus = 1; |
cparata | 3:4274d9103f1d | 2129 | } |
cparata | 0:6d69e896ce38 | 2130 | } |
cparata | 3:4274d9103f1d | 2131 | |
cparata | 3:4274d9103f1d | 2132 | if ((md1_cfg.int1_double_tap == 1U) || (md2_cfg.int2_double_tap == 1U)) { |
cparata | 3:4274d9103f1d | 2133 | if (tap_src.double_tap == 1U) { |
cparata | 3:4274d9103f1d | 2134 | status->DoubleTapStatus = 1; |
cparata | 3:4274d9103f1d | 2135 | } |
cparata | 3:4274d9103f1d | 2136 | } |
cparata | 3:4274d9103f1d | 2137 | |
cparata | 3:4274d9103f1d | 2138 | if ((md1_cfg.int1_6d == 1U) || (md2_cfg.int2_6d == 1U)) { |
cparata | 3:4274d9103f1d | 2139 | if (d6d_src.d6d_ia == 1U) { |
cparata | 3:4274d9103f1d | 2140 | status->D6DOrientationStatus = 1; |
cparata | 3:4274d9103f1d | 2141 | } |
cparata | 0:6d69e896ce38 | 2142 | } |
cparata | 3:4274d9103f1d | 2143 | |
cparata | 3:4274d9103f1d | 2144 | if (int1_ctrl.int1_step_detector == 1U) { |
cparata | 3:4274d9103f1d | 2145 | if (func_src.step_detected == 1U) { |
cparata | 3:4274d9103f1d | 2146 | status->StepStatus = 1; |
cparata | 3:4274d9103f1d | 2147 | } |
cparata | 0:6d69e896ce38 | 2148 | } |
cparata | 3:4274d9103f1d | 2149 | |
cparata | 3:4274d9103f1d | 2150 | if ((int1_ctrl.int1_tilt == 1U) || (int2_ctrl.int2_tilt == 1U)) { |
cparata | 3:4274d9103f1d | 2151 | if (tilt_ia == 1U) { |
cparata | 3:4274d9103f1d | 2152 | status->TiltStatus = 1; |
cparata | 3:4274d9103f1d | 2153 | } |
cparata | 0:6d69e896ce38 | 2154 | } |
cparata | 3:4274d9103f1d | 2155 | |
cparata | 3:4274d9103f1d | 2156 | return 0; |
cparata | 0:6d69e896ce38 | 2157 | } |
cparata | 0:6d69e896ce38 | 2158 | |
cparata | 0:6d69e896ce38 | 2159 | /** |
cparata | 0:6d69e896ce38 | 2160 | * @brief Set self test |
cparata | 0:6d69e896ce38 | 2161 | * @param val the value of st_xl in reg CTRL5_C |
cparata | 0:6d69e896ce38 | 2162 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2163 | */ |
cparata | 0:6d69e896ce38 | 2164 | int LSM6DSOSensor::set_x_self_test(uint8_t val) |
cparata | 0:6d69e896ce38 | 2165 | { |
cparata | 3:4274d9103f1d | 2166 | lsm6dso_st_xl_t reg; |
cparata | 3:4274d9103f1d | 2167 | |
cparata | 3:4274d9103f1d | 2168 | reg = (val == 0U) ? LSM6DSO_XL_ST_DISABLE |
cparata | 3:4274d9103f1d | 2169 | : (val == 1U) ? LSM6DSO_XL_ST_POSITIVE |
cparata | 3:4274d9103f1d | 2170 | : (val == 2U) ? LSM6DSO_XL_ST_NEGATIVE |
cparata | 3:4274d9103f1d | 2171 | : LSM6DSO_XL_ST_DISABLE; |
cparata | 3:4274d9103f1d | 2172 | |
cparata | 3:4274d9103f1d | 2173 | if (lsm6dso_xl_self_test_set(&_reg_ctx, reg) != 0) { |
cparata | 3:4274d9103f1d | 2174 | return 1; |
cparata | 3:4274d9103f1d | 2175 | } |
cparata | 3:4274d9103f1d | 2176 | |
cparata | 3:4274d9103f1d | 2177 | return 0; |
cparata | 0:6d69e896ce38 | 2178 | } |
cparata | 0:6d69e896ce38 | 2179 | |
cparata | 0:6d69e896ce38 | 2180 | /** |
cparata | 0:6d69e896ce38 | 2181 | * @brief Get the LSM6DSO GYRO data ready bit value |
cparata | 0:6d69e896ce38 | 2182 | * @param status the status of data ready bit |
cparata | 0:6d69e896ce38 | 2183 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2184 | */ |
cparata | 0:6d69e896ce38 | 2185 | int LSM6DSOSensor::get_g_drdy_status(uint8_t *status) |
cparata | 0:6d69e896ce38 | 2186 | { |
cparata | 3:4274d9103f1d | 2187 | if (lsm6dso_gy_flag_data_ready_get(&_reg_ctx, status) != 0) { |
cparata | 3:4274d9103f1d | 2188 | return 1; |
cparata | 3:4274d9103f1d | 2189 | } |
cparata | 3:4274d9103f1d | 2190 | |
cparata | 3:4274d9103f1d | 2191 | return 0; |
cparata | 0:6d69e896ce38 | 2192 | } |
cparata | 0:6d69e896ce38 | 2193 | |
cparata | 0:6d69e896ce38 | 2194 | /** |
cparata | 0:6d69e896ce38 | 2195 | * @brief Set self test |
cparata | 0:6d69e896ce38 | 2196 | * @param val the value of st_xl in reg CTRL5_C |
cparata | 0:6d69e896ce38 | 2197 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2198 | */ |
cparata | 0:6d69e896ce38 | 2199 | int LSM6DSOSensor::set_g_self_test(uint8_t val) |
cparata | 0:6d69e896ce38 | 2200 | { |
cparata | 3:4274d9103f1d | 2201 | lsm6dso_st_g_t reg; |
cparata | 3:4274d9103f1d | 2202 | |
cparata | 3:4274d9103f1d | 2203 | reg = (val == 0U) ? LSM6DSO_GY_ST_DISABLE |
cparata | 3:4274d9103f1d | 2204 | : (val == 1U) ? LSM6DSO_GY_ST_POSITIVE |
cparata | 3:4274d9103f1d | 2205 | : (val == 2U) ? LSM6DSO_GY_ST_NEGATIVE |
cparata | 3:4274d9103f1d | 2206 | : LSM6DSO_GY_ST_DISABLE; |
cparata | 3:4274d9103f1d | 2207 | |
cparata | 3:4274d9103f1d | 2208 | |
cparata | 3:4274d9103f1d | 2209 | if (lsm6dso_gy_self_test_set(&_reg_ctx, reg) != 0) { |
cparata | 3:4274d9103f1d | 2210 | return 1; |
cparata | 3:4274d9103f1d | 2211 | } |
cparata | 3:4274d9103f1d | 2212 | |
cparata | 3:4274d9103f1d | 2213 | return 0; |
cparata | 0:6d69e896ce38 | 2214 | } |
cparata | 0:6d69e896ce38 | 2215 | |
cparata | 0:6d69e896ce38 | 2216 | /** |
cparata | 0:6d69e896ce38 | 2217 | * @brief Get the LSM6DSO FIFO number of samples |
cparata | 0:6d69e896ce38 | 2218 | * @param num_samples number of samples |
cparata | 0:6d69e896ce38 | 2219 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2220 | */ |
cparata | 0:6d69e896ce38 | 2221 | int LSM6DSOSensor::get_fifo_num_samples(uint16_t *num_samples) |
cparata | 0:6d69e896ce38 | 2222 | { |
cparata | 3:4274d9103f1d | 2223 | if (lsm6dso_fifo_data_level_get(&_reg_ctx, num_samples) != 0) { |
cparata | 3:4274d9103f1d | 2224 | return 1; |
cparata | 3:4274d9103f1d | 2225 | } |
cparata | 3:4274d9103f1d | 2226 | |
cparata | 3:4274d9103f1d | 2227 | return 0; |
cparata | 0:6d69e896ce38 | 2228 | } |
cparata | 0:6d69e896ce38 | 2229 | |
cparata | 0:6d69e896ce38 | 2230 | /** |
cparata | 0:6d69e896ce38 | 2231 | * @brief Get the LSM6DSO FIFO full status |
cparata | 0:6d69e896ce38 | 2232 | * @param status FIFO full status |
cparata | 0:6d69e896ce38 | 2233 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2234 | */ |
cparata | 0:6d69e896ce38 | 2235 | int LSM6DSOSensor::get_fifo_full_status(uint8_t *status) |
cparata | 0:6d69e896ce38 | 2236 | { |
cparata | 3:4274d9103f1d | 2237 | lsm6dso_reg_t reg; |
cparata | 3:4274d9103f1d | 2238 | |
cparata | 3:4274d9103f1d | 2239 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_FIFO_STATUS2, ®.byte, 1) != 0) { |
cparata | 3:4274d9103f1d | 2240 | return 1; |
cparata | 3:4274d9103f1d | 2241 | } |
cparata | 3:4274d9103f1d | 2242 | |
cparata | 3:4274d9103f1d | 2243 | *status = reg.fifo_status2.fifo_full_ia; |
cparata | 3:4274d9103f1d | 2244 | |
cparata | 3:4274d9103f1d | 2245 | return 0; |
cparata | 0:6d69e896ce38 | 2246 | } |
cparata | 0:6d69e896ce38 | 2247 | |
cparata | 0:6d69e896ce38 | 2248 | /** |
cparata | 0:6d69e896ce38 | 2249 | * @brief Set the LSM6DSO FIFO full interrupt on INT1 pin |
cparata | 0:6d69e896ce38 | 2250 | * @param status FIFO full interrupt on INT1 pin status |
cparata | 0:6d69e896ce38 | 2251 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2252 | */ |
cparata | 0:6d69e896ce38 | 2253 | int LSM6DSOSensor::set_fifo_int1_fifo_full(uint8_t status) |
cparata | 0:6d69e896ce38 | 2254 | { |
cparata | 3:4274d9103f1d | 2255 | lsm6dso_reg_t reg; |
cparata | 3:4274d9103f1d | 2256 | |
cparata | 3:4274d9103f1d | 2257 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_INT1_CTRL, ®.byte, 1) != 0) { |
cparata | 3:4274d9103f1d | 2258 | return 1; |
cparata | 3:4274d9103f1d | 2259 | } |
cparata | 3:4274d9103f1d | 2260 | |
cparata | 3:4274d9103f1d | 2261 | reg.int1_ctrl.int1_fifo_full = status; |
cparata | 3:4274d9103f1d | 2262 | |
cparata | 3:4274d9103f1d | 2263 | if (lsm6dso_write_reg(&_reg_ctx, LSM6DSO_INT1_CTRL, ®.byte, 1) != 0) { |
cparata | 3:4274d9103f1d | 2264 | return 1; |
cparata | 3:4274d9103f1d | 2265 | } |
cparata | 3:4274d9103f1d | 2266 | |
cparata | 3:4274d9103f1d | 2267 | return 0; |
cparata | 0:6d69e896ce38 | 2268 | } |
cparata | 0:6d69e896ce38 | 2269 | |
cparata | 0:6d69e896ce38 | 2270 | /** |
cparata | 0:6d69e896ce38 | 2271 | * @brief Set the LSM6DSO FIFO watermark level |
cparata | 0:6d69e896ce38 | 2272 | * @param watermark FIFO watermark level |
cparata | 0:6d69e896ce38 | 2273 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2274 | */ |
cparata | 0:6d69e896ce38 | 2275 | int LSM6DSOSensor::set_fifo_watermark_level(uint16_t watermark) |
cparata | 0:6d69e896ce38 | 2276 | { |
cparata | 3:4274d9103f1d | 2277 | if (lsm6dso_fifo_watermark_set(&_reg_ctx, watermark) != 0) { |
cparata | 3:4274d9103f1d | 2278 | return 1; |
cparata | 3:4274d9103f1d | 2279 | } |
cparata | 3:4274d9103f1d | 2280 | |
cparata | 3:4274d9103f1d | 2281 | return 0; |
cparata | 0:6d69e896ce38 | 2282 | } |
cparata | 0:6d69e896ce38 | 2283 | |
cparata | 0:6d69e896ce38 | 2284 | /** |
cparata | 0:6d69e896ce38 | 2285 | * @brief Set the LSM6DSO FIFO stop on watermark |
cparata | 0:6d69e896ce38 | 2286 | * @param status FIFO stop on watermark status |
cparata | 0:6d69e896ce38 | 2287 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2288 | */ |
cparata | 0:6d69e896ce38 | 2289 | int LSM6DSOSensor::set_fifo_stop_on_fth(uint8_t status) |
cparata | 0:6d69e896ce38 | 2290 | { |
cparata | 3:4274d9103f1d | 2291 | if (lsm6dso_fifo_stop_on_wtm_set(&_reg_ctx, status) != 0) { |
cparata | 3:4274d9103f1d | 2292 | return 1; |
cparata | 3:4274d9103f1d | 2293 | } |
cparata | 3:4274d9103f1d | 2294 | |
cparata | 3:4274d9103f1d | 2295 | return 0; |
cparata | 0:6d69e896ce38 | 2296 | } |
cparata | 0:6d69e896ce38 | 2297 | |
cparata | 0:6d69e896ce38 | 2298 | /** |
cparata | 0:6d69e896ce38 | 2299 | * @brief Set the LSM6DSO FIFO mode |
cparata | 0:6d69e896ce38 | 2300 | * @param mode FIFO mode |
cparata | 0:6d69e896ce38 | 2301 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2302 | */ |
cparata | 0:6d69e896ce38 | 2303 | int LSM6DSOSensor::set_fifo_mode(uint8_t mode) |
cparata | 0:6d69e896ce38 | 2304 | { |
cparata | 3:4274d9103f1d | 2305 | int ret = 0; |
cparata | 3:4274d9103f1d | 2306 | |
cparata | 3:4274d9103f1d | 2307 | /* Verify that the passed parameter contains one of the valid values. */ |
cparata | 3:4274d9103f1d | 2308 | switch ((lsm6dso_fifo_mode_t)mode) { |
cparata | 3:4274d9103f1d | 2309 | case LSM6DSO_BYPASS_MODE: |
cparata | 3:4274d9103f1d | 2310 | case LSM6DSO_FIFO_MODE: |
cparata | 3:4274d9103f1d | 2311 | case LSM6DSO_STREAM_TO_FIFO_MODE: |
cparata | 3:4274d9103f1d | 2312 | case LSM6DSO_BYPASS_TO_STREAM_MODE: |
cparata | 3:4274d9103f1d | 2313 | case LSM6DSO_STREAM_MODE: |
cparata | 3:4274d9103f1d | 2314 | break; |
cparata | 3:4274d9103f1d | 2315 | |
cparata | 3:4274d9103f1d | 2316 | default: |
cparata | 3:4274d9103f1d | 2317 | ret = 1; |
cparata | 3:4274d9103f1d | 2318 | break; |
cparata | 3:4274d9103f1d | 2319 | } |
cparata | 3:4274d9103f1d | 2320 | |
cparata | 3:4274d9103f1d | 2321 | if (ret == 1) { |
cparata | 3:4274d9103f1d | 2322 | return ret; |
cparata | 3:4274d9103f1d | 2323 | } |
cparata | 3:4274d9103f1d | 2324 | |
cparata | 3:4274d9103f1d | 2325 | if (lsm6dso_fifo_mode_set(&_reg_ctx, (lsm6dso_fifo_mode_t)mode) != 0) { |
cparata | 3:4274d9103f1d | 2326 | return 1; |
cparata | 3:4274d9103f1d | 2327 | } |
cparata | 3:4274d9103f1d | 2328 | |
cparata | 0:6d69e896ce38 | 2329 | return ret; |
cparata | 0:6d69e896ce38 | 2330 | } |
cparata | 0:6d69e896ce38 | 2331 | |
cparata | 0:6d69e896ce38 | 2332 | /** |
cparata | 0:6d69e896ce38 | 2333 | * @brief Get the LSM6DSO FIFO tag |
cparata | 0:6d69e896ce38 | 2334 | * @param tag FIFO tag |
cparata | 0:6d69e896ce38 | 2335 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2336 | */ |
cparata | 0:6d69e896ce38 | 2337 | int LSM6DSOSensor::get_fifo_tag(uint8_t *tag) |
cparata | 0:6d69e896ce38 | 2338 | { |
cparata | 3:4274d9103f1d | 2339 | lsm6dso_fifo_tag_t tag_local; |
cparata | 3:4274d9103f1d | 2340 | |
cparata | 3:4274d9103f1d | 2341 | if (lsm6dso_fifo_sensor_tag_get(&_reg_ctx, &tag_local) != 0) { |
cparata | 3:4274d9103f1d | 2342 | return 1; |
cparata | 3:4274d9103f1d | 2343 | } |
cparata | 3:4274d9103f1d | 2344 | |
cparata | 3:4274d9103f1d | 2345 | *tag = (uint8_t)tag_local; |
cparata | 3:4274d9103f1d | 2346 | |
cparata | 3:4274d9103f1d | 2347 | return 0; |
cparata | 0:6d69e896ce38 | 2348 | } |
cparata | 0:6d69e896ce38 | 2349 | |
cparata | 0:6d69e896ce38 | 2350 | /** |
cparata | 0:6d69e896ce38 | 2351 | * @brief Get the LSM6DSO FIFO raw data |
cparata | 0:6d69e896ce38 | 2352 | * @param data FIFO raw data array [6] |
cparata | 0:6d69e896ce38 | 2353 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2354 | */ |
cparata | 0:6d69e896ce38 | 2355 | int LSM6DSOSensor::get_fifo_data(uint8_t *data) |
cparata | 0:6d69e896ce38 | 2356 | { |
cparata | 3:4274d9103f1d | 2357 | if (lsm6dso_read_reg(&_reg_ctx, LSM6DSO_FIFO_DATA_OUT_X_L, data, 6) != 0) { |
cparata | 3:4274d9103f1d | 2358 | return 1; |
cparata | 3:4274d9103f1d | 2359 | } |
cparata | 3:4274d9103f1d | 2360 | |
cparata | 3:4274d9103f1d | 2361 | return 0; |
cparata | 0:6d69e896ce38 | 2362 | } |
cparata | 0:6d69e896ce38 | 2363 | |
cparata | 0:6d69e896ce38 | 2364 | /** |
cparata | 0:6d69e896ce38 | 2365 | * @brief Get the LSM6DSO FIFO accelero single sample (16-bit data per 3 axes) and calculate acceleration [mg] |
cparata | 0:6d69e896ce38 | 2366 | * @param acceleration FIFO accelero axes [mg] |
cparata | 0:6d69e896ce38 | 2367 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2368 | */ |
cparata | 0:6d69e896ce38 | 2369 | int LSM6DSOSensor::get_fifo_x_axes(int32_t *acceleration) |
cparata | 0:6d69e896ce38 | 2370 | { |
cparata | 3:4274d9103f1d | 2371 | uint8_t data[6]; |
cparata | 3:4274d9103f1d | 2372 | int16_t data_raw[3]; |
cparata | 3:4274d9103f1d | 2373 | float sensitivity = 0.0f; |
cparata | 3:4274d9103f1d | 2374 | float acceleration_float[3]; |
cparata | 3:4274d9103f1d | 2375 | |
cparata | 3:4274d9103f1d | 2376 | if (get_fifo_data(data) != 0) { |
cparata | 3:4274d9103f1d | 2377 | return 1; |
cparata | 3:4274d9103f1d | 2378 | } |
cparata | 3:4274d9103f1d | 2379 | |
cparata | 3:4274d9103f1d | 2380 | data_raw[0] = ((int16_t)data[1] << 8) | data[0]; |
cparata | 3:4274d9103f1d | 2381 | data_raw[1] = ((int16_t)data[3] << 8) | data[2]; |
cparata | 3:4274d9103f1d | 2382 | data_raw[2] = ((int16_t)data[5] << 8) | data[4]; |
cparata | 3:4274d9103f1d | 2383 | |
cparata | 3:4274d9103f1d | 2384 | if (get_x_sensitivity(&sensitivity) != 0) { |
cparata | 3:4274d9103f1d | 2385 | return 1; |
cparata | 3:4274d9103f1d | 2386 | } |
cparata | 3:4274d9103f1d | 2387 | |
cparata | 3:4274d9103f1d | 2388 | acceleration_float[0] = (float)data_raw[0] * sensitivity; |
cparata | 3:4274d9103f1d | 2389 | acceleration_float[1] = (float)data_raw[1] * sensitivity; |
cparata | 3:4274d9103f1d | 2390 | acceleration_float[2] = (float)data_raw[2] * sensitivity; |
cparata | 3:4274d9103f1d | 2391 | |
cparata | 3:4274d9103f1d | 2392 | acceleration[0] = (int32_t)acceleration_float[0]; |
cparata | 3:4274d9103f1d | 2393 | acceleration[1] = (int32_t)acceleration_float[1]; |
cparata | 3:4274d9103f1d | 2394 | acceleration[2] = (int32_t)acceleration_float[2]; |
cparata | 3:4274d9103f1d | 2395 | |
cparata | 3:4274d9103f1d | 2396 | return 0; |
cparata | 0:6d69e896ce38 | 2397 | } |
cparata | 0:6d69e896ce38 | 2398 | |
cparata | 0:6d69e896ce38 | 2399 | /** |
cparata | 0:6d69e896ce38 | 2400 | * @brief Set the LSM6DSO FIFO accelero BDR value |
cparata | 0:6d69e896ce38 | 2401 | * @param bdr FIFO accelero BDR value |
cparata | 0:6d69e896ce38 | 2402 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2403 | */ |
cparata | 0:6d69e896ce38 | 2404 | int LSM6DSOSensor::set_fifo_x_bdr(float bdr) |
cparata | 0:6d69e896ce38 | 2405 | { |
cparata | 3:4274d9103f1d | 2406 | lsm6dso_bdr_xl_t new_bdr; |
cparata | 3:4274d9103f1d | 2407 | |
cparata | 3:4274d9103f1d | 2408 | new_bdr = (bdr <= 0.0f) ? LSM6DSO_XL_NOT_BATCHED |
cparata | 3:4274d9103f1d | 2409 | : (bdr <= 12.5f) ? LSM6DSO_XL_BATCHED_AT_12Hz5 |
cparata | 3:4274d9103f1d | 2410 | : (bdr <= 26.0f) ? LSM6DSO_XL_BATCHED_AT_26Hz |
cparata | 3:4274d9103f1d | 2411 | : (bdr <= 52.0f) ? LSM6DSO_XL_BATCHED_AT_52Hz |
cparata | 3:4274d9103f1d | 2412 | : (bdr <= 104.0f) ? LSM6DSO_XL_BATCHED_AT_104Hz |
cparata | 3:4274d9103f1d | 2413 | : (bdr <= 208.0f) ? LSM6DSO_XL_BATCHED_AT_208Hz |
cparata | 3:4274d9103f1d | 2414 | : (bdr <= 416.0f) ? LSM6DSO_XL_BATCHED_AT_417Hz |
cparata | 3:4274d9103f1d | 2415 | : (bdr <= 833.0f) ? LSM6DSO_XL_BATCHED_AT_833Hz |
cparata | 3:4274d9103f1d | 2416 | : (bdr <= 1660.0f) ? LSM6DSO_XL_BATCHED_AT_1667Hz |
cparata | 3:4274d9103f1d | 2417 | : (bdr <= 3330.0f) ? LSM6DSO_XL_BATCHED_AT_3333Hz |
cparata | 3:4274d9103f1d | 2418 | : LSM6DSO_XL_BATCHED_AT_6667Hz; |
cparata | 3:4274d9103f1d | 2419 | |
cparata | 3:4274d9103f1d | 2420 | if (lsm6dso_fifo_xl_batch_set(&_reg_ctx, new_bdr) != 0) { |
cparata | 3:4274d9103f1d | 2421 | return 1; |
cparata | 3:4274d9103f1d | 2422 | } |
cparata | 3:4274d9103f1d | 2423 | |
cparata | 3:4274d9103f1d | 2424 | return 0; |
cparata | 0:6d69e896ce38 | 2425 | } |
cparata | 0:6d69e896ce38 | 2426 | |
cparata | 0:6d69e896ce38 | 2427 | /** |
cparata | 0:6d69e896ce38 | 2428 | * @brief Get the LSM6DSO FIFO gyro single sample (16-bit data per 3 axes) and calculate angular velocity [mDPS] |
cparata | 0:6d69e896ce38 | 2429 | * @param angular_velocity FIFO gyro axes [mDPS] |
cparata | 0:6d69e896ce38 | 2430 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2431 | */ |
cparata | 0:6d69e896ce38 | 2432 | int LSM6DSOSensor::get_fifo_g_axes(int32_t *angular_velocity) |
cparata | 0:6d69e896ce38 | 2433 | { |
cparata | 3:4274d9103f1d | 2434 | uint8_t data[6]; |
cparata | 3:4274d9103f1d | 2435 | int16_t data_raw[3]; |
cparata | 3:4274d9103f1d | 2436 | float sensitivity = 0.0f; |
cparata | 3:4274d9103f1d | 2437 | float angular_velocity_float[3]; |
cparata | 3:4274d9103f1d | 2438 | |
cparata | 3:4274d9103f1d | 2439 | if (get_fifo_data(data) != 0) { |
cparata | 3:4274d9103f1d | 2440 | return 1; |
cparata | 3:4274d9103f1d | 2441 | } |
cparata | 3:4274d9103f1d | 2442 | |
cparata | 3:4274d9103f1d | 2443 | data_raw[0] = ((int16_t)data[1] << 8) | data[0]; |
cparata | 3:4274d9103f1d | 2444 | data_raw[1] = ((int16_t)data[3] << 8) | data[2]; |
cparata | 3:4274d9103f1d | 2445 | data_raw[2] = ((int16_t)data[5] << 8) | data[4]; |
cparata | 3:4274d9103f1d | 2446 | |
cparata | 3:4274d9103f1d | 2447 | if (get_g_sensitivity(&sensitivity) != 0) { |
cparata | 3:4274d9103f1d | 2448 | return 1; |
cparata | 3:4274d9103f1d | 2449 | } |
cparata | 3:4274d9103f1d | 2450 | |
cparata | 3:4274d9103f1d | 2451 | angular_velocity_float[0] = (float)data_raw[0] * sensitivity; |
cparata | 3:4274d9103f1d | 2452 | angular_velocity_float[1] = (float)data_raw[1] * sensitivity; |
cparata | 3:4274d9103f1d | 2453 | angular_velocity_float[2] = (float)data_raw[2] * sensitivity; |
cparata | 3:4274d9103f1d | 2454 | |
cparata | 3:4274d9103f1d | 2455 | angular_velocity[0] = (int32_t)angular_velocity_float[0]; |
cparata | 3:4274d9103f1d | 2456 | angular_velocity[1] = (int32_t)angular_velocity_float[1]; |
cparata | 3:4274d9103f1d | 2457 | angular_velocity[2] = (int32_t)angular_velocity_float[2]; |
cparata | 3:4274d9103f1d | 2458 | |
cparata | 3:4274d9103f1d | 2459 | return 0; |
cparata | 0:6d69e896ce38 | 2460 | } |
cparata | 0:6d69e896ce38 | 2461 | |
cparata | 0:6d69e896ce38 | 2462 | /** |
cparata | 0:6d69e896ce38 | 2463 | * @brief Set the LSM6DSO FIFO gyro BDR value |
cparata | 0:6d69e896ce38 | 2464 | * @param bdr FIFO gyro BDR value |
cparata | 0:6d69e896ce38 | 2465 | * @retval 0 in case of success, an error code otherwise |
cparata | 0:6d69e896ce38 | 2466 | */ |
cparata | 0:6d69e896ce38 | 2467 | int LSM6DSOSensor::set_fifo_g_bdr(float bdr) |
cparata | 0:6d69e896ce38 | 2468 | { |
cparata | 3:4274d9103f1d | 2469 | lsm6dso_bdr_gy_t new_bdr; |
cparata | 3:4274d9103f1d | 2470 | |
cparata | 3:4274d9103f1d | 2471 | new_bdr = (bdr <= 0.0f) ? LSM6DSO_GY_NOT_BATCHED |
cparata | 3:4274d9103f1d | 2472 | : (bdr <= 12.5f) ? LSM6DSO_GY_BATCHED_AT_12Hz5 |
cparata | 3:4274d9103f1d | 2473 | : (bdr <= 26.0f) ? LSM6DSO_GY_BATCHED_AT_26Hz |
cparata | 3:4274d9103f1d | 2474 | : (bdr <= 52.0f) ? LSM6DSO_GY_BATCHED_AT_52Hz |
cparata | 3:4274d9103f1d | 2475 | : (bdr <= 104.0f) ? LSM6DSO_GY_BATCHED_AT_104Hz |
cparata | 3:4274d9103f1d | 2476 | : (bdr <= 208.0f) ? LSM6DSO_GY_BATCHED_AT_208Hz |
cparata | 3:4274d9103f1d | 2477 | : (bdr <= 416.0f) ? LSM6DSO_GY_BATCHED_AT_417Hz |
cparata | 3:4274d9103f1d | 2478 | : (bdr <= 833.0f) ? LSM6DSO_GY_BATCHED_AT_833Hz |
cparata | 3:4274d9103f1d | 2479 | : (bdr <= 1660.0f) ? LSM6DSO_GY_BATCHED_AT_1667Hz |
cparata | 3:4274d9103f1d | 2480 | : (bdr <= 3330.0f) ? LSM6DSO_GY_BATCHED_AT_3333Hz |
cparata | 3:4274d9103f1d | 2481 | : LSM6DSO_GY_BATCHED_AT_6667Hz; |
cparata | 3:4274d9103f1d | 2482 | |
cparata | 3:4274d9103f1d | 2483 | if (lsm6dso_fifo_gy_batch_set(&_reg_ctx, new_bdr) != 0) { |
cparata | 3:4274d9103f1d | 2484 | return 1; |
cparata | 3:4274d9103f1d | 2485 | } |
cparata | 3:4274d9103f1d | 2486 | |
cparata | 3:4274d9103f1d | 2487 | return 0; |
cparata | 0:6d69e896ce38 | 2488 | } |
cparata | 0:6d69e896ce38 | 2489 | |
cparata | 0:6d69e896ce38 | 2490 | |
cparata | 0:6d69e896ce38 | 2491 | |
cparata | 0:6d69e896ce38 | 2492 | int32_t LSM6DSO_io_write(void *handle, uint8_t WriteAddr, uint8_t *pBuffer, uint16_t nBytesToWrite) |
cparata | 0:6d69e896ce38 | 2493 | { |
cparata | 3:4274d9103f1d | 2494 | return ((LSM6DSOSensor *)handle)->io_write(pBuffer, WriteAddr, nBytesToWrite); |
cparata | 0:6d69e896ce38 | 2495 | } |
cparata | 0:6d69e896ce38 | 2496 | |
cparata | 0:6d69e896ce38 | 2497 | int32_t LSM6DSO_io_read(void *handle, uint8_t ReadAddr, uint8_t *pBuffer, uint16_t nBytesToRead) |
cparata | 0:6d69e896ce38 | 2498 | { |
cparata | 3:4274d9103f1d | 2499 | return ((LSM6DSOSensor *)handle)->io_read(pBuffer, ReadAddr, nBytesToRead); |
cparata | 0:6d69e896ce38 | 2500 | } |