L-Tek / Mbed OS Dot-Examples

FF1705 support added

Dependencies:   libxDot-dev-mbed5-deprecated ISL29011

Fork of Dot-Examples by MultiTech

Dot-Examples rev. 31:7ec180e84cb6 have been tested with xdot-library 3.0.0-19-gb6c0ba2 and mbed-os-5.6.2

examples/src/peer_to_peer_example.cpp@30:2c57bd7c0324, 2017-10-13 (annotated)

Committer:
gorazdko
Date:
Fri Oct 13 05:39:31 2017 +0000
Revision:
30:2c57bd7c0324
Parent:
26:79d1af6752dd 
Peer to peer example tested on FF1705

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Mike Fiore 11:d2e31743433a 1 #include "dot_util.h"
Mike Fiore 14:19fae4509473 2 #include "RadioEvent.h"
Mike Fiore 11:d2e31743433a 3
Mike Fiore 11:d2e31743433a 4 #if ACTIVE_EXAMPLE == PEER_TO_PEER_EXAMPLE
Mike Fiore 11:d2e31743433a 5
mfiore 17:d4f82e16de5f 6 /////////////////////////////////////////////////////////////////////////////
mfiore 17:d4f82e16de5f 7 // -------------------- DOT LIBRARY REQUIRED ------------------------------//
mfiore 17:d4f82e16de5f 8 // * Because these example programs can be used for both mDot and xDot //
mfiore 17:d4f82e16de5f 9 // devices, the LoRa stack is not included. The libmDot library should //
mfiore 17:d4f82e16de5f 10 // be imported if building for mDot devices. The libxDot library //
mfiore 17:d4f82e16de5f 11 // should be imported if building for xDot devices. //
mfiore 17:d4f82e16de5f 12 // * https://developer.mbed.org/teams/MultiTech/code/libmDot-dev-mbed5/ //
mfiore 17:d4f82e16de5f 13 // * https://developer.mbed.org/teams/MultiTech/code/libmDot-mbed5/ //
mfiore 17:d4f82e16de5f 14 // * https://developer.mbed.org/teams/MultiTech/code/libxDot-dev-mbed5/ //
mfiore 17:d4f82e16de5f 15 // * https://developer.mbed.org/teams/MultiTech/code/libxDot-mbed5/ //
mfiore 17:d4f82e16de5f 16 /////////////////////////////////////////////////////////////////////////////
mfiore 17:d4f82e16de5f 17
Mike Fiore 11:d2e31743433a 18 /////////////////////////////////////////////////////////////
Mike Fiore 11:d2e31743433a 19 // * these options must match between the two devices in //
Mike Fiore 11:d2e31743433a 20 // order for communication to be successful
Mike Fiore 11:d2e31743433a 21 /////////////////////////////////////////////////////////////
Mike Fiore 11:d2e31743433a 22 static uint8_t network_address[] = { 0x01, 0x02, 0x03, 0x04 };
Mike Fiore 11:d2e31743433a 23 static uint8_t network_session_key[] = { 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04 };
Mike Fiore 11:d2e31743433a 24 static uint8_t data_session_key[] = { 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04 };
Mike Fiore 11:d2e31743433a 25
Mike Fiore 11:d2e31743433a 26 mDot* dot = NULL;
Mike Fiore 21:09d05faf0e13 27 lora::ChannelPlan* plan = NULL;
Mike Fiore 11:d2e31743433a 28
Mike Fiore 11:d2e31743433a 29 Serial pc(USBTX, USBRX);
Mike Fiore 11:d2e31743433a 30
gorazdko 25:c30633bcf302 31 #ifdef TARGET_FF1705_L151CC
gorazdko 30:2c57bd7c0324 32 AnalogIn lux(A0);
gorazdko 25:c30633bcf302 33 #elif defined(TARGET_XDOT_L151CC)
Mike Fiore 11:d2e31743433a 34 I2C i2c(I2C_SDA, I2C_SCL);
Mike Fiore 11:d2e31743433a 35 ISL29011 lux(i2c);
Mike Fiore 11:d2e31743433a 36 #else
Mike Fiore 11:d2e31743433a 37 AnalogIn lux(XBEE_AD0);
Mike Fiore 11:d2e31743433a 38 #endif
Mike Fiore 11:d2e31743433a 39
Mike Fiore 11:d2e31743433a 40 int main() {
Mike Fiore 14:19fae4509473 41 // Custom event handler for automatically displaying RX data
Mike Fiore 11:d2e31743433a 42 RadioEvent events;
Mike Fiore 11:d2e31743433a 43 uint32_t tx_frequency;
Mike Fiore 11:d2e31743433a 44 uint8_t tx_datarate;
Mike Fiore 11:d2e31743433a 45 uint8_t tx_power;
Mike Fiore 11:d2e31743433a 46 uint8_t frequency_band;
Mike Fiore 11:d2e31743433a 47
Mike Fiore 11:d2e31743433a 48 pc.baud(115200);
Mike Fiore 11:d2e31743433a 49
Mike Fiore 11:d2e31743433a 50 mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL);
Mike Fiore 11:d2e31743433a 51
Mike Fiore 21:09d05faf0e13 52 #if CHANNEL_PLAN == CP_US915
Mike Fiore 21:09d05faf0e13 53 plan = new lora::ChannelPlan_US915();
Mike Fiore 21:09d05faf0e13 54 #elif CHANNEL_PLAN == CP_AU915
Mike Fiore 21:09d05faf0e13 55 plan = new lora::ChannelPlan_AU915();
Mike Fiore 21:09d05faf0e13 56 #elif CHANNEL_PLAN == CP_EU868
Mike Fiore 21:09d05faf0e13 57 plan = new lora::ChannelPlan_EU868();
Mike Fiore 21:09d05faf0e13 58 #elif CHANNEL_PLAN == CP_KR920
Mike Fiore 21:09d05faf0e13 59 plan = new lora::ChannelPlan_KR920();
Mike Fiore 21:09d05faf0e13 60 #elif CHANNEL_PLAN == CP_AS923
Mike Fiore 21:09d05faf0e13 61 plan = new lora::ChannelPlan_AS923();
Mike Fiore 21:09d05faf0e13 62 #elif CHANNEL_PLAN == CP_AS923_JAPAN
Mike Fiore 21:09d05faf0e13 63 plan = new lora::ChannelPlan_AS923_Japan();
mfiore 22:d9bc10bbc433 64 #elif CHANNEL_PLAN == CP_IN865
mfiore 22:d9bc10bbc433 65 plan = new lora::ChannelPlan_IN865();
Mike Fiore 21:09d05faf0e13 66 #endif
Mike Fiore 21:09d05faf0e13 67 assert(plan);
Mike Fiore 21:09d05faf0e13 68
Mike Fiore 21:09d05faf0e13 69 dot = mDot::getInstance(plan);
Mike Fiore 21:09d05faf0e13 70 assert(dot);
Mike Fiore 11:d2e31743433a 71
Mike Fiore 16:a3832552dfe1 72 logInfo("mbed-os library version: %d", MBED_LIBRARY_VERSION);
Mike Fiore 16:a3832552dfe1 73
Mike Fiore 12:ec9768677cea 74 // start from a well-known state
Mike Fiore 12:ec9768677cea 75 logInfo("defaulting Dot configuration");
Mike Fiore 12:ec9768677cea 76 dot->resetConfig();
Mike Fiore 12:ec9768677cea 77
Mike Fiore 11:d2e31743433a 78 // make sure library logging is turned on
Mike Fiore 11:d2e31743433a 79 dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
Mike Fiore 11:d2e31743433a 80
Mike Fiore 11:d2e31743433a 81 // attach the custom events handler
Mike Fiore 11:d2e31743433a 82 dot->setEvents(&events);
Mike Fiore 11:d2e31743433a 83
Mike Fiore 11:d2e31743433a 84 // update configuration if necessary
Mike Fiore 11:d2e31743433a 85 if (dot->getJoinMode() != mDot::PEER_TO_PEER) {
Mike Fiore 11:d2e31743433a 86 logInfo("changing network join mode to PEER_TO_PEER");
Mike Fiore 11:d2e31743433a 87 if (dot->setJoinMode(mDot::PEER_TO_PEER) != mDot::MDOT_OK) {
Mike Fiore 11:d2e31743433a 88 logError("failed to set network join mode to PEER_TO_PEER");
Mike Fiore 11:d2e31743433a 89 }
Mike Fiore 11:d2e31743433a 90 }
Mike Fiore 11:d2e31743433a 91 frequency_band = dot->getFrequencyBand();
Mike Fiore 11:d2e31743433a 92 switch (frequency_band) {
Mike Fiore 21:09d05faf0e13 93 case lora::ChannelPlan::EU868_OLD:
Mike Fiore 21:09d05faf0e13 94 case lora::ChannelPlan::EU868:
Mike Fiore 11:d2e31743433a 95 // 250kHz channels achieve higher throughput
Mike Fiore 21:09d05faf0e13 96 // DR_6 : SF7 @ 250kHz
Mike Fiore 21:09d05faf0e13 97 // DR_0 - DR_5 (125kHz channels) available but much slower
Mike Fiore 11:d2e31743433a 98 tx_frequency = 869850000;
Mike Fiore 21:09d05faf0e13 99 tx_datarate = lora::DR_6;
Mike Fiore 11:d2e31743433a 100 // the 869850000 frequency is 100% duty cycle if the total power is under 7 dBm - tx power 4 + antenna gain 3 = 7
Mike Fiore 11:d2e31743433a 101 tx_power = 4;
Mike Fiore 11:d2e31743433a 102 break;
Mike Fiore 21:09d05faf0e13 103
Mike Fiore 21:09d05faf0e13 104 case lora::ChannelPlan::US915_OLD:
Mike Fiore 21:09d05faf0e13 105 case lora::ChannelPlan::US915:
Mike Fiore 21:09d05faf0e13 106 case lora::ChannelPlan::AU915_OLD:
Mike Fiore 21:09d05faf0e13 107 case lora::ChannelPlan::AU915:
Mike Fiore 11:d2e31743433a 108 // 500kHz channels achieve highest throughput
Mike Fiore 21:09d05faf0e13 109 // DR_8 : SF12 @ 500kHz
Mike Fiore 21:09d05faf0e13 110 // DR_9 : SF11 @ 500kHz
Mike Fiore 21:09d05faf0e13 111 // DR_10 : SF10 @ 500kHz
Mike Fiore 21:09d05faf0e13 112 // DR_11 : SF9 @ 500kHz
Mike Fiore 21:09d05faf0e13 113 // DR_12 : SF8 @ 500kHz
Mike Fiore 21:09d05faf0e13 114 // DR_13 : SF7 @ 500kHz
Mike Fiore 21:09d05faf0e13 115 // DR_0 - DR_3 (125kHz channels) available but much slower
Mike Fiore 11:d2e31743433a 116 tx_frequency = 915500000;
Mike Fiore 21:09d05faf0e13 117 tx_datarate = lora::DR_13;
Mike Fiore 11:d2e31743433a 118 // 915 bands have no duty cycle restrictions, set tx power to max
Mike Fiore 11:d2e31743433a 119 tx_power = 20;
Mike Fiore 11:d2e31743433a 120 break;
Mike Fiore 21:09d05faf0e13 121
Mike Fiore 21:09d05faf0e13 122 case lora::ChannelPlan::AS923:
Mike Fiore 21:09d05faf0e13 123 case lora::ChannelPlan::AS923_JAPAN:
Mike Fiore 21:09d05faf0e13 124 // 250kHz channels achieve higher throughput
Mike Fiore 21:09d05faf0e13 125 // DR_6 : SF7 @ 250kHz
Mike Fiore 21:09d05faf0e13 126 // DR_0 - DR_5 (125kHz channels) available but much slower
Mike Fiore 21:09d05faf0e13 127 tx_frequency = 924800000;
Mike Fiore 21:09d05faf0e13 128 tx_datarate = lora::DR_6;
Mike Fiore 21:09d05faf0e13 129 tx_power = 16;
Mike Fiore 21:09d05faf0e13 130 break;
Mike Fiore 21:09d05faf0e13 131
Mike Fiore 21:09d05faf0e13 132 case lora::ChannelPlan::KR920:
Mike Fiore 21:09d05faf0e13 133 // DR_5 : SF7 @ 125kHz
Mike Fiore 21:09d05faf0e13 134 tx_frequency = 922700000;
Mike Fiore 21:09d05faf0e13 135 tx_datarate = lora::DR_5;
Mike Fiore 21:09d05faf0e13 136 tx_power = 14;
Mike Fiore 21:09d05faf0e13 137 break;
Mike Fiore 21:09d05faf0e13 138
Mike Fiore 21:09d05faf0e13 139 default:
Mike Fiore 21:09d05faf0e13 140 while (true) {
Mike Fiore 21:09d05faf0e13 141 logFatal("no known channel plan in use - extra configuration is needed!");
Mike Fiore 21:09d05faf0e13 142 wait(5);
Mike Fiore 21:09d05faf0e13 143 }
Mike Fiore 21:09d05faf0e13 144 break;
Mike Fiore 11:d2e31743433a 145 }
Mike Fiore 11:d2e31743433a 146 // in PEER_TO_PEER mode there is no join request/response transaction
Mike Fiore 11:d2e31743433a 147 // as long as both Dots are configured correctly, they should be able to communicate
Mike Fiore 11:d2e31743433a 148 update_peer_to_peer_config(network_address, network_session_key, data_session_key, tx_frequency, tx_datarate, tx_power);
Mike Fiore 11:d2e31743433a 149
Mike Fiore 11:d2e31743433a 150 // save changes to configuration
Mike Fiore 11:d2e31743433a 151 logInfo("saving configuration");
Mike Fiore 11:d2e31743433a 152 if (!dot->saveConfig()) {
Mike Fiore 11:d2e31743433a 153 logError("failed to save configuration");
Mike Fiore 11:d2e31743433a 154 }
Mike Fiore 11:d2e31743433a 155
Mike Fiore 11:d2e31743433a 156 // display configuration
Mike Fiore 11:d2e31743433a 157 display_config();
Mike Fiore 11:d2e31743433a 158
gorazdko 30:2c57bd7c0324 159 #if defined(TARGET_XDOT_L151CC) && !defined(TARGET_FF1705_L151CC)
Mike Fiore 11:d2e31743433a 160 // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range
Mike Fiore 11:d2e31743433a 161 lux.setMode(ISL29011::ALS_CONT);
Mike Fiore 11:d2e31743433a 162 lux.setResolution(ISL29011::ADC_16BIT);
Mike Fiore 11:d2e31743433a 163 lux.setRange(ISL29011::RNG_64000);
Mike Fiore 11:d2e31743433a 164 #endif
Mike Fiore 11:d2e31743433a 165
Mike Fiore 11:d2e31743433a 166 while (true) {
Mike Fiore 11:d2e31743433a 167 uint16_t light;
Mike Fiore 11:d2e31743433a 168 std::vector<uint8_t> tx_data;
Mike Fiore 11:d2e31743433a 169
Mike Fiore 11:d2e31743433a 170 // join network if not joined
Mike Fiore 11:d2e31743433a 171 if (!dot->getNetworkJoinStatus()) {
Mike Fiore 11:d2e31743433a 172 join_network();
Mike Fiore 11:d2e31743433a 173 }
Mike Fiore 11:d2e31743433a 174
gorazdko 30:2c57bd7c0324 175
gorazdko 26:79d1af6752dd 176
gorazdko 30:2c57bd7c0324 177 #if defined(TARGET_XDOT_L151CC) && !defined(TARGET_FF1705_L151CC)
Mike Fiore 11:d2e31743433a 178 // get the latest light sample and send it to the gateway
Mike Fiore 11:d2e31743433a 179 light = lux.getData();
Mike Fiore 11:d2e31743433a 180 tx_data.push_back((light >> 8) & 0xFF);
Mike Fiore 11:d2e31743433a 181 tx_data.push_back(light & 0xFF);
Mike Fiore 11:d2e31743433a 182 logInfo("light: %lu [0x%04X]", light, light);
Mike Fiore 11:d2e31743433a 183 send_data(tx_data);
gorazdko 30:2c57bd7c0324 184
gorazdko 30:2c57bd7c0324 185 #else // TARGET_FF1705_L151CC
Mike Fiore 11:d2e31743433a 186 // get some dummy data and send it to the gateway
Mike Fiore 11:d2e31743433a 187 light = lux.read_u16();
Mike Fiore 11:d2e31743433a 188 tx_data.push_back((light >> 8) & 0xFF);
Mike Fiore 11:d2e31743433a 189 tx_data.push_back(light & 0xFF);
Mike Fiore 11:d2e31743433a 190 logInfo("light: %lu [0x%04X]", light, light);
Mike Fiore 11:d2e31743433a 191 send_data(tx_data);
Mike Fiore 11:d2e31743433a 192 #endif
Mike Fiore 11:d2e31743433a 193
Mike Fiore 11:d2e31743433a 194 // the Dot can't sleep in PEER_TO_PEER mode
Mike Fiore 11:d2e31743433a 195 // it must be waiting for data from the other Dot
Mike Fiore 11:d2e31743433a 196 // send data every 5 seconds
Mike Fiore 11:d2e31743433a 197 logInfo("waiting for 5s");
Mike Fiore 11:d2e31743433a 198 wait(5);
Mike Fiore 11:d2e31743433a 199 }
Mike Fiore 11:d2e31743433a 200
Mike Fiore 11:d2e31743433a 201 return 0;
Mike Fiore 11:d2e31743433a 202 }
Mike Fiore 11:d2e31743433a 203
Mike Fiore 11:d2e31743433a 204 #endif
Mike Fiore 11:d2e31743433a 205