![](/media/cache/group/fb_avatar_2.png.50x50_q85.jpg)
Example of AWS IoT connection and Web Dashboard thru STM32 Nucleo evaluation board and mbed OS.
Dependencies: X_NUCLEO_IKS01A1 mbed FP MQTTPacket DnsQuery ATParser
Introduction
The demo is aimed to STM32 Nucleo board with WiFi and sensors expansions. The board is a "thing" for the AWS IoT service. It updates IoT service shadow with sensors data every second and checks subscription messages.
Hardware Configuration
- NUCLEO-F401RE - Nucleo Development Board
- X-NUCLEO-IDW01M1 - Wi-Fi expansion board for STM32 Nucleo
- X-NUCLEO-IKS01A1 - Motion MEMS and environmental sensor expansion board for STM32 Nucleo
Software Configuration
- Import this Project to mbed online compiler
- Find the next part of code in main.cpp file ...
WiFi network credential
#include "mbed.h" // WiFi network credential #define SSID "" // Network must be visible otherwise it can't connect #define PASSW "" #error "Wifi SSID & password empty"
- ... And set it to your Network Name and Password. Do not forget to remove "#error" pragma line.
Information
Nucleo WiFi module is not the same as your smartphone or laptope - it is based on demo board. To avoid connection problems:
- Place Nucleo as close to WiFi hot spot as possible. Or...
- Turn on mobile hot spot in your laptop as close to the device as possible.
- Make sure that hot spot permits 2.4 GHz band communications
- Setup BackEnd and store certificates using this backend setup instruction
- Find AWS_IOT_MQTT_HOST define and change it to HTTPS point mentioned in your AWS IoT thing properties named "interact"
#define AWS_IOT_MQTT_HOST "xxxxxxxxxx.iot.us-east-1.amazonaws.com" //Use your own host.
- Find the certificate defines clientCRT and clientKey in main.cpp file and change it to ones provided by Amazon.
/********************************************************************************************** *********************************************************************************************** Device Identity Certificates: Modify for your AWS IoT Thing *********************************************************************************************** ***********************************************************************************************/ /**************************************** (somecode)-certificate.pem.crt - Amazon signed PEM sertificate. *****************************************/ //This Client cert is example. Use own instead. const uint8_t clientCRT[] = "\ -----BEGIN CERTIFICATE-----\n\ MIIDBjCCAe6gAwIBAgIUVph856omeIxW3UPioq+UrX1DbwowDQYJKoZIhvcNAQEL\ BQAwTTFLMEkGA1UECwxCQW1hem9uIFdlYiBTZXJ2aWNlcyBPPUFtYXpvbi5jb20g\ SW5jLiBMPVNlYXR0bGUgU1Q9V2FzaGluZ3RvbiBDPVVTMB4XDTE3MDUyNTExNTEy\ OVoXDTQ5MTIzMTIzNTk1OVowgZUxCzAJBgNVBAYTAkJZMQ4wDAYDVQQIDAVNaW5z\ azEOMAwGA1UEBwwFTWluc2sxFzAVBgNVBAoMDktsaWthLVRlY2ggTExDMRcwFQYD\ VQQLDA5LbGlrYS1UZWNoIExMQzEMMAoGA1UEAwwDUm5EMSYwJAYJKoZIhvcNAQkB\ FhdtdmF0YWxldUBrbGlrYS10ZWNoLmNvbTBZMBMGByqGSM49AgEGCCqGSM49AwEH\ A0IABCJgOQJmoTBJVPfli9Hm/JVixaxkY5rtlgrYO3hSl633A2hg0P/ue0wXDbF3\ aQ0X57IRFE4k4FEbr3UXjT/IczKjYDBeMB8GA1UdIwQYMBaAFK3YzTUPlYB2Li75\ i/z8rEogr1d6MB0GA1UdDgQWBBT18HXBaXFJuAR/0SwegnxJ+pyJ6TAMBgNVHRMB\ Af8EAjAAMA4GA1UdDwEB/wQEAwIHgDANBgkqhkiG9w0BAQsFAAOCAQEAb0Ux1aH5\ RLxjrfGqXN6rPVqh8QQRS+AyBfzmaQN8HaPZMkX5WxXLvcn0A3uWlwQxPPkcZ4zf\ 51GHtFFQWB4YZ8dx8mUQ0v/j7onHjCJgZ8iDgwOyKMGtnsDZWCakQw+a6cj+NrMZ\ tzhjwCzEEP6ePcbXwErI5OOzLuWns2L/JEr2wWNkokgRuS8ewr/SQ9OLWIWa2rFM\ ahPNTb3y/qBeWdjeJmhI+TOxdqIpsF8roWP25zwo/zkzCHCjXFBrL+0CA4MpxIl9\ x02i7aAhlJ6ys80lDxdeWeeQJXRKkGknP8mcmKn3iEqqJ5s1dQePj2b5d3ldatya\ wsxQBqqZXzIWEw==\ \n\ -----END CERTIFICATE-----\n"; /********************************************************************************************** *********************************************************************************************** Private Key: Modify for your AWS IoT Thing *********************************************************************************************** ***********************************************************************************************/ /********************************************************************8**************************************** nucleo.key.pem - client key generated according to readme. **************************************************************************************************************/ //This Client Key is example. Use own instead. const uint8_t clientKey[] ="\ -----BEGIN EC PARAMETERS-----\n\ BggqhkjOPQMBBw==\ -----END EC PARAMETERS-----\n\ -----BEGIN EC PRIVATE KEY-----\n\ MHcCAQEEIHPRfWSC8/k/BsqDWKuP15dXsI9fGwpkTIsLZe6mIrAAoAoGCCqGSM49\ AwEHoUQDQgAEImA5AmahMElU9+WL0eb8lWLFrGRjmu2WCtg7eFKXrfcDaGDQ/+57\ TBcNsXdpDRfnshEUTiTgURuvdReNP8hzMg==\ -----END EC PRIVATE KEY-----\n";
Build and Check
- Plugin your board to USB of your PC. USB Disk Drive and USB COM Port should appear in your system.
- Open any Serial Console, connect it to your USB Serial Port and setup speed equal to 115200.
- Compile this Project and save .bin file to USB Disk Drive
- After board reset you should see next log in serial console:
X-NUCLEO-IDW01M1 mbed Application connecting to AP LOG: int main() L#361 Connected to WiFI. LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#186 ===================================== LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#187 Connecting WiFi. LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#188 Nucleo IP ADDRESS: X.X.X.X LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#189 Nucleo MAC ADDRESS: 00:11:22:33:44:55 LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#190 Server Hostname: xxxxxxxx.iot.us-east-1.amazonaws.com port: 8883 LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#191 Client ID: Nucleo LOG: int connect(MQTT::Client<MQTTWiFi, Countdown, 350, 5> *, MQTTWiFi *) L#194 ===================================== LOG: int MQTTSocket::getNTPtime(int) L#58 Success receiving time from ntp server. Tick from 1 Jan 1970 is equal to 1505399292. --->TCP Connected --->MQTT Connected --->>>MQTT subscribed to: Nucleo/test Length - 245, Publishing {"state": {"reported": {"temperature": 23.690001, "humidity": 98.190002, "pressure": 982.869141, "accelerometer": [-0.009000, 0.030000, 0.971000], "gyroscope": [0.420000, -2.660000, 1.750000], "magnetometer": [-3.600000, -7.100000, 53.300000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.660000, "humidity": 98.010002, "pressure": 982.770264, "accelerometer": [-0.009000, 0.030000, 0.971000], "gyroscope": [0.770000, -2.310000, 1.470000], "magnetometer": [-3.100000, -8.300000, 54.200000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.670000, "humidity": 98.129997, "pressure": 982.724121, "accelerometer": [-0.008000, 0.029000, 0.971000], "gyroscope": [0.630000, -2.380000, 1.400000], "magnetometer": [-3.100000, -7.900000, 53.400000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.690001, "humidity": 98.019997, "pressure": 982.840088, "accelerometer": [-0.009000, 0.030000, 0.972000], "gyroscope": [0.700000, -2.450000, 1.540000], "magnetometer": [-3.700000, -7.900000, 53.400000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.709999, "humidity": 98.040001, "pressure": 982.828613, "accelerometer": [-0.009000, 0.030000, 0.971000], "gyroscope": [0.630000, -2.520000, 1.470000], "magnetometer": [-2.900000, -7.400000, 52.400000]}}} Length - 245, Publishing {"state": {"reported": {"temperature": 23.719999, "humidity": 97.860001, "pressure": 982.917236, "accelerometer": [-0.026000, 0.103000, 0.891000], "gyroscope": [1.050000, -2.310000, 1.260000], "magnetometer": [-3.300000, -7.100000, 53.500000]}}}
Information
Device connection state might be checked by Green Led on the board. Green light means that device is connected and transferring data to cloud.
- Configure and start your dashboard using instruction and corresponding sources from github
- Use Blue button to set up markers to charts.
- Use AWS IoT console MQTT Client to test device subscription to "Nucleo/test". Just publish any message to this topic and serial port output.
- PROFIT!
Diff: NetworkSocketAPI/TCPServer.cpp
- Revision:
- 0:4cdaf9b1e7d0
diff -r 000000000000 -r 4cdaf9b1e7d0 NetworkSocketAPI/TCPServer.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/NetworkSocketAPI/TCPServer.cpp Wed Sep 27 14:40:52 2017 +0300 @@ -0,0 +1,75 @@ +/* Socket + * Copyright (c) 2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "TCPServer.h" +#include "Timer.h" + +TCPServer::TCPServer() +{ +} + +TCPServer::TCPServer(NetworkStack *iface) +{ + open(iface); +} + +int TCPServer::open(NetworkStack *iface) +{ + return Socket::open(iface, NSAPI_TCP); +} + +int TCPServer::listen(int backlog) +{ + if (!_socket) { + return NSAPI_ERROR_NO_SOCKET; + } + + return _iface->socket_listen(_socket, backlog); +} + +int TCPServer::accept(TCPSocket *connection) +{ + mbed::Timer timer; + timer.start(); + mbed::Timeout timeout; + if (_timeout >= 0) { + timeout.attach_us(&Socket::wakeup, _timeout * 1000); + } + + if (connection->_socket) { + connection->close(); + } + + while (true) { + if (!_socket) { + return NSAPI_ERROR_NO_SOCKET; + } + + void *socket; + int err = _iface->socket_accept(&socket, _socket); + if (!err) { + connection->_iface = _iface; + connection->_socket = socket; + } + + if (err != NSAPI_ERROR_WOULD_BLOCK + || (_timeout >= 0 && timer.read_ms() >= _timeout)) { + return err; + } + + __WFI(); + } +}