Diff: NRF2401P.h

Revision:

5:7e253c677a1f

Parent:

3:afe8d307b5c3

--- a/NRF2401P.h	Fri Jun 12 08:07:53 2015 +0000
+++ b/NRF2401P.h	Fri Jun 12 09:55:02 2015 +0000
@@ -23,6 +23,62 @@
  * THE SOFTWARE.
  * @file "NRF2401P.h"
  */
+ 
+/** \brief A library to drive the nRF24l01+
+* 
+*   This library is a simple way to get the nRF24l01+ up and running.
+*
+*- Use case: For a simple transmitter 
+*@code
+*int main() {
+*
+*  long long addr1=0xAB00CD; // setup address - any 5 byte number - same as RX
+*  int channel =0x12;  // [0-126] setup channel, must be same as RX
+*  bool txOK;
+*  char msg[32];
+*  char ackData[32];
+*  char len;
+*
+*  // Setup 
+*  NRF2401P nrf1(PTD6,PTD7, PTD5,PTD4, PTC12); //mosi, miso, sclk, csn, ce)
+*  nrf1.quickTxSetup(channel, addr1); // sets nrf24l01+ as transmitter
+*
+*  // transmit
+*  strcpy (msg, "Hello"); 
+*  txOK= nrf1.transmitData(msg,strlen(msg));
+*
+*  // read ack data if available
+*  if (nrf1.isAckData()) { 
+*      len= nrf1.getRxData(ackData); // len is number of bytes in ackData
+*   }
+*}
+*@endcode
+*- Use case: For a simple receiver 
+*@code
+*int main(){
+*        
+*  long long addr1=0xAB00CD; // setup address - any 5 byte number - same as TX
+*  int channel =0x12;  // [0-126] setup channel, must be same as TX
+*  bool txOK;
+*  char msg[32];
+*  char ackData[32];
+*  char len;
+*
+*  // Setup 
+*  NRF2401P nrf1(PTD6,PTD7, PTD5,PTD4, PTC12); //mosi, miso, sclk, csn, ce)
+*  nrf1.quickRxSetup(channel, addr1); // sets nrf24l01+ as  receiver, using pipe 1
+*
+*  // set ack data
+*  sprintf(ackData,"Ack data");
+*  nrf1.acknowledgeData(ackData, strlen(ackData),1); // ack for pipe 1
+*    
+*  // receive
+*  while (! nrf1.isRxData()); // note this blocks until RX data
+*  len= nrf1.getRxData(msg); // gets the message, len is length of msg
+*
+*}
+*@endcode
+*/
 class NRF2401P
 {
 public: