Diff: main.cpp

Revision:

1:e5796aa9f1aa

Parent:

0:33fe30a2b785

--- a/main.cpp	Tue Sep 04 06:44:01 2018 +0000
+++ b/main.cpp	Mon Oct 22 04:03:54 2018 +0000
@@ -1,19 +1,29 @@
 /**
- * Copyright 2018 Japan Display Inc.
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
- #include "stdio.h"
+* @file main.cpp
+* @brief Sample source code for MIP8 diplay. 
+* @details  
+*
+* Addtional function is Monochome display by 1bit mode of SPI transfer.
+*
+* spi-transfer to Display has 3 mode. 
+* 4bit mode is color display, this bit arrange is  R,G,B,x.   R,G,B = R,G,B subpixel bit.  a x bit is Dummy.
+* No ues(3bit mode is color display, this bit arrange is  R,G,B.   R,G,B = R,G,B subpixel bit.  No bit is Dummy.)
+* 1bit mode is monocrome display,high speed refresh mode. a only Green subpixel of bitmap data is transfered.
+* <License>
+* Copyright 2018 Japan Display Inc.
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*/
+#include "stdio.h"
 #include "string"
 #include "mbed.h"
 #include "MIP8F_SPI.h"
@@ -21,7 +31,6 @@
 #include "StateSW.h"
 #include "TglSW.h"
 
-
 #include "Arial12x12.h"
 #include "Arial24x23.h"
 #include "Arial28x28.h"
@@ -35,26 +44,24 @@
 #define ON  1
 #define OFF 0
 
-
 //K64F
 SDFileSystem sd(PTE3, PTE1, PTE2, PTE4, "sd"); // mosi,miso,sck,cs
 memLCD8 WD(PTD2,PTD3,PTD1,PTD0,PTC4,PTD3); //PTC12);  // mosi,miso,clk,cs,disp,power
 PwmOut BK(PTC3);
 PwmOut COM60HZ(PTC10);    //add 20161108 
 DigitalOut COMSEL(PTA2,0);    //add 20161108
-
 DigitalOut BLCTRL(PTB10,0);    //add 20171115
-
 // SW2
 StateSW swPWMorOFF(SW2); //PTC6); 
 InterruptIn PWMorOFF(SW2);
-
 // SW3
 TglSW HaltSW(SW3);  //PTA4); 
 DigitalIn TexSW(SW3);
 
+//for debug
+//Serial pc(USBTX, USBRX); // tx, rx
 
- 
+//function prototype
 void SD2BUF(char *filepath);
 void ifOFFseq(void);
 void ifswPWM(void);
@@ -62,6 +69,7 @@
 void DispAllDir(const char *fsrc);
 void ReadBmp(const char *fsrc, uint32_t FileNum);
 uint32_t CntFile(const char *fsrc);
+//Grobal value
 int  ifMargeTXT = 0;
 int  width = 400;
 int  height= 240;
@@ -72,14 +80,13 @@
 float bk_timer = 1.0;
 int   blduty = 0;
 int   bloff = 0;
-int   blctrl_sel = 1; //0:40mA, 1:160mA
+int   blctrl_sel = 0; //0:40mA, 1:160mA //Y.S
 
 int main() {
 
     uint32_t filenum=0;
     char filepath[40];
     
-  
     sd.disk_initialize();
     HaltSW.Enable(1);
 
@@ -130,33 +137,26 @@
     BK.period_ms(1);    //1ms cycle    20161012 
     BK.write(0);    //low output    20160725 <- high output
 
-    while(1){ //BITMAPS
+   while(1)
+    { //BITMAPS
         filenum = CntFile(filepath);    //file number read
-        for(uint32_t i=0; i<filenum; i++){
+   	    for(uint32_t i=0; i<filenum; i++)
+       	{
             ReadBmp(filepath,i);
-
-            while(HaltSW.State()){             // VCOM invert when image is still
-            //    pol++;
-            //    WD.command( (pol << 6) & 0x40 ); 
+  	        while(HaltSW.State()) {             // VCOM invert when image is still
+       	    //    pol++;
+           	//    WD.command( (pol << 6) & 0x40 ); 
             //    wait(bk_timer);                       //1Hz
-            }
-/*
-            // Brink
-            for(char j = 0; j < 8; j++){
-                pol = j&0x01;
-                EnterOrLeave = (j+1)&0x01;
-                WD.command( (pol << 6) | (EnterOrLeave << 3) ); 
-                wait(0.2);
-            }
-*/
-            HaltSW.Clear();
-            WD.writeDISP();
-            wait(2);
+   	        }
+           	HaltSW.Clear();
+			//1bit trasfer mode = monochro diplay
+         	WD.writeDISP(TrBIT1);
+	        wait(2);
         }
     }
 }
 
-
+//4bit mode
 void SD2BUF(char *filepath){
     char R8[1],G8[1],B8[1] ,DUMMY[1];
     int RGB;
@@ -175,7 +175,7 @@
                 WD.pixel(x,y,RGB);
             }
             if( y!=0)  // The last data column doesn't need padding
-            for(int x=(width*3)%4; (x%4 !=0); x++) fscanf(fp, "%c",DUMMY);    // 4byte boundery for every column
+            for(int x=(width*3)%4; (x%4 !=0); x++) fscanf(fp, "%c",DUMMY);    // 4byte boundery for every column(only windows bitmap format)
         }
     }
     fclose(fp);