Diff: main_echo.cpp

Revision:

4:73fd4185bca2

Parent:

3:335c4028bf36

--- a/main_echo.cpp	Tue Nov 15 15:49:47 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,114 +0,0 @@
-#include "mbed.h"
-#include "nRF24L01P.h"
-
-//***************************************************************************//
-// !!! SETTINGS !!!
-
-//#define DATA_RATE       NRF24L01P_DATARATE_250_KBPS    
-#define DATA_RATE       NRF24L01P_DATARATE_1_MBPS     
-//#define DATA_RATE       NRF24L01P_DATARATE_2_MBPS    
-
-//#define POWER           NRF24L01P_TX_PWR_ZERO_DB
-//#define POWER           NRF24L01P_TX_PWR_MINUS_6_DB
-//#define POWER           NRF24L01P_TX_PWR_MINUS_12_DB
-#define POWER           NRF24L01P_TX_PWR_MINUS_18_DB
-
-#define CHANNEL         0 // 0 - 30
-
-
-#define RX_ADDRESS      ((unsigned long long) 0xABCDEF00)
-#define TX_ADDRESS      ((unsigned long long) 0xABCDEF01)
-#define ECHO_DELAY      0.1
-
-#define TRANSFER_SIZE   32
-
-//***************************************************************************//
-
-
-
-Serial pc(USBTX, USBRX); // tx, rx
-nRF24L01P radio(PB_15, PB_14, PB_13, PB_12, PB_1, PB_2);    // mosi, miso, sck, csn, ce, irq
-
-
-DigitalOut myled1(LED1);
-InterruptIn button(USER_BUTTON);
-
-bool send_data = false;
-
-void send_packet(){
-    send_data = true;
-}
-
-int main() {
-
-    
-    char txData[TRANSFER_SIZE], rxData[TRANSFER_SIZE];
-
-    pc.baud(115200);
-    radio.powerDown();
-    radio.powerUp();
-    
-    button.rise(&send_packet);
-    
-    radio.setAirDataRate(DATA_RATE);
-    radio.setRfOutputPower(POWER);
-    radio.setRfFrequency(NRF24L01P_MIN_RF_FREQUENCY + 4 * CHANNEL);
-    
-    radio.setCrcWidth(NRF24L01P_CRC_8_BIT);
-    radio.enableAutoAcknowledge(NRF24L01P_PIPE_P0);
-    radio.enableAutoAcknowledge(NRF24L01P_PIPE_P1);
-    radio.enableAutoRetransmit(0x0F, 0x0F);
-    
-    radio.setTxAddress(TX_ADDRESS, 4);
-    radio.setRxAddress(TX_ADDRESS, 4, NRF24L01P_PIPE_P0);
-    
-    radio.setRxAddress(RX_ADDRESS, 4, NRF24L01P_PIPE_P1);
-    
-    // Display the (default) setup of the nRF24L01+ chip
-    pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  radio.getRfFrequency() );
-    pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  radio.getRfOutputPower() );
-    pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", radio.getAirDataRate() );
-    pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", radio.getTxAddress() );
-    pc.printf( "nRF24L01+ RX0 Address   : 0x%010llX\r\n", radio.getRxAddress(NRF24L01P_PIPE_P0) );
-    pc.printf( "nRF24L01+ RX1 Address   : 0x%010llX\r\n", radio.getRxAddress(NRF24L01P_PIPE_P1) );
-
-
-    radio.setTransferSize(TRANSFER_SIZE, NRF24L01P_PIPE_P0);
-    radio.setTransferSize(TRANSFER_SIZE, NRF24L01P_PIPE_P1);
-    
-    myled1 = 0;
-
-    radio.setReceiveMode();
-    radio.enable();
-
-    while (1) {
-        int tx_bytes=0;
-        int rx_bytes=0;
-
-        if(radio.readable(NRF24L01P_PIPE_P1)){
-
-            rx_bytes = radio.read(NRF24L01P_PIPE_P1, rxData, sizeof(rxData));
-            myled1 = 1;
-            pc.printf("PING RECV\r\n");
-            
-            wait(ECHO_DELAY);
-            
-            tx_bytes = radio.write(NRF24L01P_PIPE_P0, txData, TRANSFER_SIZE);
-            myled1 = 0;
-            pc.printf("PONG SEND\r\n");
-        }
-        
-        if(send_data){
-            tx_bytes = radio.write(NRF24L01P_PIPE_P0, txData, TRANSFER_SIZE);
-            send_data = false;
-            pc.printf("INIT SEND\r\n");
-        }
-        
-        if(tx_bytes < 0)
-            pc.printf("TX ERROR\r\n");
-            
-        if(tx_bytes > 0)    
-            pc.printf("RETR: %d\r\n", radio.getRetrCount());
-        
-    }
-}