![](/media/cache/group/default_image.jpg.50x50_q85.jpg)
An embedded device
Dependencies: Crypto
main.cpp@10:a4b5723b6c9d, 2019-02-26 (annotated)
- Committer:
- estott
- Date:
- Tue Feb 26 12:23:17 2019 +0000
- Revision:
- 10:a4b5723b6c9d
- Parent:
- 5:08f338b5e4d9
- Child:
- 12:899cd6bf9844
- Child:
- 19:ca08111237ab
Changed the device and pins
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
estott | 0:de4320f74764 | 1 | #include "mbed.h" |
estott | 0:de4320f74764 | 2 | |
estott | 0:de4320f74764 | 3 | //Photointerrupter input pins |
estott | 10:a4b5723b6c9d | 4 | #define I1pin D3 |
estott | 10:a4b5723b6c9d | 5 | #define I2pin D6 |
estott | 10:a4b5723b6c9d | 6 | #define I3pin D5 |
estott | 2:4e88faab6988 | 7 | |
estott | 2:4e88faab6988 | 8 | //Incremental encoder input pins |
estott | 10:a4b5723b6c9d | 9 | #define CHApin D12 |
estott | 10:a4b5723b6c9d | 10 | #define CHBpin D11 |
estott | 0:de4320f74764 | 11 | |
estott | 0:de4320f74764 | 12 | //Motor Drive output pins //Mask in output byte |
estott | 10:a4b5723b6c9d | 13 | #define L1Lpin D1 //0x01 |
estott | 10:a4b5723b6c9d | 14 | #define L1Hpin A3 //0x02 |
estott | 10:a4b5723b6c9d | 15 | #define L2Lpin D0 //0x04 |
estott | 10:a4b5723b6c9d | 16 | #define L2Hpin A6 //0x08 |
estott | 10:a4b5723b6c9d | 17 | #define L3Lpin D10 //0x10 |
estott | 10:a4b5723b6c9d | 18 | #define L3Hpin D2 //0x20 |
estott | 10:a4b5723b6c9d | 19 | |
estott | 10:a4b5723b6c9d | 20 | #define PWMpin D9 |
estott | 5:08f338b5e4d9 | 21 | |
estott | 5:08f338b5e4d9 | 22 | //Motor current sense |
estott | 5:08f338b5e4d9 | 23 | #define MCSPpin A1 |
estott | 5:08f338b5e4d9 | 24 | #define MCSNpin A0 |
estott | 0:de4320f74764 | 25 | |
estott | 0:de4320f74764 | 26 | //Mapping from sequential drive states to motor phase outputs |
estott | 0:de4320f74764 | 27 | /* |
estott | 0:de4320f74764 | 28 | State L1 L2 L3 |
estott | 0:de4320f74764 | 29 | 0 H - L |
estott | 0:de4320f74764 | 30 | 1 - H L |
estott | 0:de4320f74764 | 31 | 2 L H - |
estott | 0:de4320f74764 | 32 | 3 L - H |
estott | 0:de4320f74764 | 33 | 4 - L H |
estott | 0:de4320f74764 | 34 | 5 H L - |
estott | 0:de4320f74764 | 35 | 6 - - - |
estott | 0:de4320f74764 | 36 | 7 - - - |
estott | 0:de4320f74764 | 37 | */ |
estott | 0:de4320f74764 | 38 | //Drive state to output table |
estott | 0:de4320f74764 | 39 | const int8_t driveTable[] = {0x12,0x18,0x09,0x21,0x24,0x06,0x00,0x00}; |
estott | 2:4e88faab6988 | 40 | |
estott | 0:de4320f74764 | 41 | //Mapping from interrupter inputs to sequential rotor states. 0x00 and 0x07 are not valid |
estott | 2:4e88faab6988 | 42 | const int8_t stateMap[] = {0x07,0x05,0x03,0x04,0x01,0x00,0x02,0x07}; |
estott | 2:4e88faab6988 | 43 | //const int8_t stateMap[] = {0x07,0x01,0x03,0x02,0x05,0x00,0x04,0x07}; //Alternative if phase order of input or drive is reversed |
estott | 2:4e88faab6988 | 44 | |
estott | 2:4e88faab6988 | 45 | //Phase lead to make motor spin |
estott | 3:569b35e2a602 | 46 | const int8_t lead = 2; //2 for forwards, -2 for backwards |
estott | 0:de4320f74764 | 47 | |
estott | 0:de4320f74764 | 48 | //Status LED |
estott | 0:de4320f74764 | 49 | DigitalOut led1(LED1); |
estott | 0:de4320f74764 | 50 | |
estott | 0:de4320f74764 | 51 | //Photointerrupter inputs |
estott | 2:4e88faab6988 | 52 | DigitalIn I1(I1pin); |
estott | 2:4e88faab6988 | 53 | DigitalIn I2(I2pin); |
estott | 2:4e88faab6988 | 54 | DigitalIn I3(I3pin); |
estott | 0:de4320f74764 | 55 | |
estott | 0:de4320f74764 | 56 | //Motor Drive outputs |
estott | 0:de4320f74764 | 57 | DigitalOut L1L(L1Lpin); |
estott | 0:de4320f74764 | 58 | DigitalOut L1H(L1Hpin); |
estott | 0:de4320f74764 | 59 | DigitalOut L2L(L2Lpin); |
estott | 0:de4320f74764 | 60 | DigitalOut L2H(L2Hpin); |
estott | 0:de4320f74764 | 61 | DigitalOut L3L(L3Lpin); |
estott | 0:de4320f74764 | 62 | DigitalOut L3H(L3Hpin); |
estott | 0:de4320f74764 | 63 | |
estott | 0:de4320f74764 | 64 | //Set a given drive state |
estott | 0:de4320f74764 | 65 | void motorOut(int8_t driveState){ |
estott | 0:de4320f74764 | 66 | |
estott | 2:4e88faab6988 | 67 | //Lookup the output byte from the drive state. |
estott | 2:4e88faab6988 | 68 | int8_t driveOut = driveTable[driveState & 0x07]; |
estott | 2:4e88faab6988 | 69 | |
estott | 2:4e88faab6988 | 70 | //Turn off first |
estott | 2:4e88faab6988 | 71 | if (~driveOut & 0x01) L1L = 0; |
estott | 2:4e88faab6988 | 72 | if (~driveOut & 0x02) L1H = 1; |
estott | 2:4e88faab6988 | 73 | if (~driveOut & 0x04) L2L = 0; |
estott | 2:4e88faab6988 | 74 | if (~driveOut & 0x08) L2H = 1; |
estott | 2:4e88faab6988 | 75 | if (~driveOut & 0x10) L3L = 0; |
estott | 2:4e88faab6988 | 76 | if (~driveOut & 0x20) L3H = 1; |
estott | 2:4e88faab6988 | 77 | |
estott | 2:4e88faab6988 | 78 | //Then turn on |
estott | 2:4e88faab6988 | 79 | if (driveOut & 0x01) L1L = 1; |
estott | 2:4e88faab6988 | 80 | if (driveOut & 0x02) L1H = 0; |
estott | 2:4e88faab6988 | 81 | if (driveOut & 0x04) L2L = 1; |
estott | 2:4e88faab6988 | 82 | if (driveOut & 0x08) L2H = 0; |
estott | 2:4e88faab6988 | 83 | if (driveOut & 0x10) L3L = 1; |
estott | 2:4e88faab6988 | 84 | if (driveOut & 0x20) L3H = 0; |
estott | 0:de4320f74764 | 85 | } |
estott | 0:de4320f74764 | 86 | |
estott | 2:4e88faab6988 | 87 | //Convert photointerrupter inputs to a rotor state |
estott | 0:de4320f74764 | 88 | inline int8_t readRotorState(){ |
estott | 2:4e88faab6988 | 89 | return stateMap[I1 + 2*I2 + 4*I3]; |
estott | 0:de4320f74764 | 90 | } |
estott | 0:de4320f74764 | 91 | |
estott | 0:de4320f74764 | 92 | //Basic synchronisation routine |
estott | 2:4e88faab6988 | 93 | int8_t motorHome() { |
estott | 0:de4320f74764 | 94 | //Put the motor in drive state 0 and wait for it to stabilise |
estott | 0:de4320f74764 | 95 | motorOut(0); |
estott | 3:569b35e2a602 | 96 | wait(2.0); |
estott | 0:de4320f74764 | 97 | |
estott | 0:de4320f74764 | 98 | //Get the rotor state |
estott | 2:4e88faab6988 | 99 | return readRotorState(); |
estott | 0:de4320f74764 | 100 | } |
estott | 0:de4320f74764 | 101 | |
estott | 0:de4320f74764 | 102 | //Main |
estott | 0:de4320f74764 | 103 | int main() { |
estott | 2:4e88faab6988 | 104 | int8_t orState = 0; //Rotot offset at motor state 0 |
estott | 3:569b35e2a602 | 105 | int8_t intState = 0; |
estott | 3:569b35e2a602 | 106 | int8_t intStateOld = 0; |
estott | 2:4e88faab6988 | 107 | |
estott | 0:de4320f74764 | 108 | //Initialise the serial port |
estott | 0:de4320f74764 | 109 | Serial pc(SERIAL_TX, SERIAL_RX); |
estott | 0:de4320f74764 | 110 | pc.printf("Hello\n\r"); |
estott | 0:de4320f74764 | 111 | |
estott | 0:de4320f74764 | 112 | //Run the motor synchronisation |
estott | 2:4e88faab6988 | 113 | orState = motorHome(); |
estott | 2:4e88faab6988 | 114 | pc.printf("Rotor origin: %x\n\r",orState); |
estott | 2:4e88faab6988 | 115 | //orState is subtracted from future rotor state inputs to align rotor and motor states |
estott | 0:de4320f74764 | 116 | |
estott | 0:de4320f74764 | 117 | //Poll the rotor state and set the motor outputs accordingly to spin the motor |
estott | 1:184cb0870c04 | 118 | while (1) { |
estott | 2:4e88faab6988 | 119 | intState = readRotorState(); |
estott | 2:4e88faab6988 | 120 | if (intState != intStateOld) { |
estott | 2:4e88faab6988 | 121 | intStateOld = intState; |
estott | 2:4e88faab6988 | 122 | motorOut((intState-orState+lead+6)%6); //+6 to make sure the remainder is positive |
estott | 5:08f338b5e4d9 | 123 | //pc.printf("%d\n\r",intState); |
estott | 0:de4320f74764 | 124 | } |
estott | 2:4e88faab6988 | 125 | } |
estott | 0:de4320f74764 | 126 | } |
estott | 0:de4320f74764 | 127 |