changed default debug settings
Fork of cc3000_hostdriver_mbedsocket by
cc3000_socket.h
- Committer:
- Kojto
- Date:
- 2013-09-19
- Revision:
- 0:615c697c33b0
- Child:
- 4:15b58c119a0a
File content as of revision 0:615c697c33b0:
/***************************************************************************** * * C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to * Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and * provided help. * * This version of "host driver" uses CC3000 Host Driver Implementation. Thus * read the following copyright: * * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef CC3000_SOCKET_H #define CC3000_SOCKET_H #define SOCKET_STATUS_ACTIVE 0 #define SOCKET_STATUS_INACTIVE 1 #define SOCKET_STATUS_INIT_VAL 0xFFFF #define M_IS_VALID_SD(sd) ((0 <= (sd)) && ((sd) <= 7)) #define M_IS_VALID_STATUS(status) (((status) == SOCKET_STATUS_ACTIVE)||((status) == SOCKET_STATUS_INACTIVE)) #ifdef _API_USE_BSD_CLOSE #define close(sd) closesocket(sd) #endif //Enable this flag if and only if you must comply with BSD socket read() and //write() functions #ifdef _API_USE_BSD_READ_WRITE #define read(sd, buf, len, flags) recv(sd, buf, len, flags) #define write(sd, buf, len, flags) send(sd, buf, len, flags) #endif #define SOCKET_OPEN_PARAMS_LEN (12) #define SOCKET_CLOSE_PARAMS_LEN (4) #define SOCKET_ACCEPT_PARAMS_LEN (4) #define SOCKET_BIND_PARAMS_LEN (20) #define SOCKET_LISTEN_PARAMS_LEN (8) #define SOCKET_GET_HOST_BY_NAME_PARAMS_LEN (9) #define SOCKET_CONNECT_PARAMS_LEN (20) #define SOCKET_SELECT_PARAMS_LEN (44) #define SOCKET_SET_SOCK_OPT_PARAMS_LEN (20) #define SOCKET_GET_SOCK_OPT_PARAMS_LEN (12) #define SOCKET_RECV_FROM_PARAMS_LEN (12) #define SOCKET_SENDTO_PARAMS_LEN (24) #define SOCKET_MDNS_ADVERTISE_PARAMS_LEN (12) //#define NULL 0 // The legnth of arguments for the SEND command: sd + buff_offset + len + flags, // while size of each parameter is 32 bit - so the total length is 16 bytes; #define HCI_CMND_SEND_ARG_LENGTH (16) #define SELECT_TIMEOUT_MIN_MICRO_SECONDS 5000 #define HEADERS_SIZE_DATA (SPI_HEADER_SIZE + 5) #define SIMPLE_LINK_HCI_CMND_TRANSPORT_HEADER_SIZE (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE) #define MDNS_DEVICE_SERVICE_MAX_LENGTH (32) #define HOSTNAME_MAX_LENGTH (230) // 230 bytes + header shouldn't exceed 8 bit value //--------- Address Families -------- #define AF_INET 2 #define AF_INET6 23 //------------ Socket Types ------------ #define SOCK_STREAM 1 #define SOCK_DGRAM 2 #define SOCK_RAW 3 // Raw sockets allow new IPv4 protocols to be implemented in user space. A raw socket receives or sends the raw datagram not including link level headers #define SOCK_RDM 4 #define SOCK_SEQPACKET 5 //----------- Socket Protocol ---------- #define IPPROTO_IP 0 // dummy for IP #define IPPROTO_ICMP 1 // control message protocol #define IPPROTO_IPV4 IPPROTO_IP // IP inside IP #define IPPROTO_TCP 6 // tcp #define IPPROTO_UDP 17 // user datagram protocol #define IPPROTO_IPV6 41 // IPv6 in IPv6 #define IPPROTO_NONE 59 // No next header #define IPPROTO_RAW 255 // raw IP packet #define IPPROTO_MAX 256 //----------- Socket retunr codes ----------- #define SOC_ERROR (-1) // error #define SOC_IN_PROGRESS (-2) // socket in progress //----------- Socket Options ----------- #define SOL_SOCKET 0xffff // socket level #define SOCKOPT_RECV_TIMEOUT 1 // optname to configure recv and recvfromtimeout #define SOCKOPT_NONBLOCK 2 // accept non block mode set SOCK_ON or SOCK_OFF (default block mode ) #define SOCK_ON 0 // socket non-blocking mode is enabled #define SOCK_OFF 1 // socket blocking mode is enabled #define TCP_NODELAY 0x0001 #define TCP_BSDURGENT 0x7000 #define MAX_PACKET_SIZE 1500 #define MAX_LISTEN_QUEUE 4 #define IOCTL_SOCKET_EVENTMASK #define ENOBUFS 55 // No buffer space available #define __FD_SETSIZE 32 #define ASIC_ADDR_LEN 8 #define NO_QUERY_RECIVED -3 typedef struct _in_addr_t { uint32_t s_addr; // load with inet_aton() } in_addr; /*typedef struct _sockaddr_t { unsigned short int sa_family; unsigned char sa_data[14]; } sockaddr;*/ typedef struct _sockaddr_in_t { int16_t sin_family; // e.g. AF_INET uint16_t sin_port; // e.g. htons(3490) in_addr sin_addr; // see struct in_addr, below uint8_t sin_zero[8]; // zero this if you want to } sockaddr_in; typedef uint32_t socklen_t; // The fd_set member is required to be an array of longs. typedef int32_t __fd_mask; // It's easier to assume 8-bit bytes than to get CHAR_BIT. #define __NFDBITS (8 * sizeof (__fd_mask)) #define __FDELT(d) ((d) / __NFDBITS) #define __FDMASK(d) ((__fd_mask) 1 << ((d) % __NFDBITS)) // fd_set for select and pselect. typedef struct { __fd_mask fds_bits[__FD_SETSIZE / __NFDBITS]; #define __FDS_BITS(set) ((set)->fds_bits) } fd_set; // We don't use `memset' because this would require a prototype and // the array isn't too big. #define __FD_ZERO(set) \ do { \ uint32_t __i; \ fd_set *__arr = (set); \ for (__i = 0; __i < sizeof (fd_set) / sizeof (__fd_mask); ++__i) \ __FDS_BITS (__arr)[__i] = 0; \ } while (0) #define __FD_SET(d, set) (__FDS_BITS (set)[__FDELT (d)] |= __FDMASK (d)) #define __FD_CLR(d, set) (__FDS_BITS (set)[__FDELT (d)] &= ~__FDMASK (d)) #define __FD_ISSET(d, set) (__FDS_BITS (set)[__FDELT (d)] & __FDMASK (d)) // Access macros for 'fd_set'. #define FD_SET(fd, fdsetp) __FD_SET (fd, fdsetp) #define FD_CLR(fd, fdsetp) __FD_CLR (fd, fdsetp) #define FD_ISSET(fd, fdsetp) __FD_ISSET (fd, fdsetp) #define FD_ZERO(fdsetp) __FD_ZERO (fdsetp) //Use in case of Big Endian only #define htonl(A) ((((uint32_t)(A) & 0xff000000) >> 24) | \ (((uint32_t)(A) & 0x00ff0000) >> 8) | \ (((uint32_t)(A) & 0x0000ff00) << 8) | \ (((uint32_t)(A) & 0x000000ff) << 24)) #define ntohl htonl //Use in case of Big Endian only #define htons(A) ((((uint32_t)(A) & 0xff00) >> 8) | \ (((uint32_t)(A) & 0x00ff) << 8)) #define ntohs htons // mDNS port - 5353 mDNS multicast address - 224.0.0.251 #define SET_mDNS_ADD(sockaddr) sockaddr.sa_data[0] = 0x14; \ sockaddr.sa_data[1] = 0xe9; \ sockaddr.sa_data[2] = 0xe0; \ sockaddr.sa_data[3] = 0x0; \ sockaddr.sa_data[4] = 0x0; \ sockaddr.sa_data[5] = 0xfb; #endif