changed default debug settings
Fork of cc3000_hostdriver_mbedsocket by
Diff: cc3000_common.h
- Revision:
- 1:c7b8f55e0ca1
- Child:
- 20:30b6ed7bf8fd
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/cc3000_common.h Thu Sep 19 08:01:20 2013 +0000 @@ -0,0 +1,198 @@ +/***************************************************************************** +* +* C++ interface/implementation created by Martin Kojtal (0xc0170). Thanks to +* Jim Carver and Frank Vannieuwkerke for their inital cc3000 mbed port and +* provided help. +* +* This version of "host driver" uses CC3000 Host Driver Implementation. Thus +* read the following copyright: +* +* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*****************************************************************************/ +#ifndef CC3000_COMMON_H +#define CC3000_COMMON_H + +#include <errno.h> + +//#define CC3000_TINY_DRIVER // Driver for small memory model CPUs + +#define ESUCCESS 0 +#define EFAIL -1 +#define EERROR EFAIL + +#define CC3000_UNENCRYPTED_SMART_CONFIG // No encryption + +#define ERROR_SOCKET_INACTIVE -57 + +#define HCI_CC_PAYLOAD_LEN 5 + +#define WLAN_ENABLE (1) +#define WLAN_DISABLE (0) + +#define MAC_ADDR_LEN (6) + + +/*Defines for minimal and maximal RX buffer size. This size includes the spi + header and hci header. + maximal buffer size: MTU + HCI header + SPI header + sendto() args size + minimum buffer size: HCI header + SPI header + max args size + + This buffer is used for receiving events and data. + The packet can not be longer than MTU size and CC3000 does not support + fragmentation. Note that the same buffer is used for reception of the data + and events from CC3000. That is why the minimum is defined. + The calculation for the actual size of buffer for reception is: + Given the maximal data size MAX_DATA that is expected to be received by + application, the required buffer Using recv() or recvfrom(): + + max(CC3000_MINIMAL_RX_SIZE, MAX_DATA + HEADERS_SIZE_DATA + fromlen + ucArgsize + 1) + + Using gethostbyname() with minimal buffer size will limit the host name returned to 99 bytes. + The 1 is used for the overrun detection +*/ + +#define CC3000_MINIMAL_RX_SIZE (118 + 1) +#define CC3000_MAXIMAL_RX_SIZE (511 + 1) + +/*Defines for minimal and maximal TX buffer size. + This buffer is used for sending events and data. + The packet can not be longer than MTU size and CC3000 does not support + fragmentation. Note that the same buffer is used for transmission of the data + and commands. That is why the minimum is defined. + The calculation for the actual size of buffer for transmission is: + Given the maximal data size MAX_DATA, the required buffer is: + Using Sendto(): + + max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE + + SOCKET_SENDTO_PARAMS_LEN + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1) + + Using Send(): + + max(CC3000_MINIMAL_TX_SIZE, MAX_DATA + SPI_HEADER_SIZE + + HCI_CMND_SEND_ARG_LENGTH + SIMPLE_LINK_HCI_DATA_HEADER_SIZE + 1) + + The 1 is used for the overrun detection */ + +#define CC3000_MINIMAL_TX_SIZE (118 + 1) +#define CC3000_MAXIMAL_TX_SIZE (1519 + 1) + +//TX and RX buffer size - allow to receive and transmit maximum data at lengh 8. +#ifdef CC3000_TINY_DRIVER +#define TINY_CC3000_MAXIMAL_RX_SIZE 44 +#define TINY_CC3000_MAXIMAL_TX_SIZE 59 +#endif + +/*In order to determine your preferred buffer size, + change CC3000_MAXIMAL_RX_SIZE and CC3000_MAXIMAL_TX_SIZE to a value between + the minimal and maximal specified above. + Note that the buffers are allocated by SPI. +*/ + +#ifndef CC3000_TINY_DRIVER + + #define CC3000_RX_BUFFER_SIZE (CC3000_MAXIMAL_RX_SIZE) + #define CC3000_TX_BUFFER_SIZE (CC3000_MAXIMAL_TX_SIZE) + #define SP_PORTION_SIZE 512 + +//TINY DRIVER: We use smaller rx and tx buffers in order to minimize RAM consumption +#else + #define CC3000_RX_BUFFER_SIZE (TINY_CC3000_MAXIMAL_RX_SIZE) + #define CC3000_TX_BUFFER_SIZE (TINY_CC3000_MAXIMAL_TX_SIZE) + #define SP_PORTION_SIZE 32 +#endif + + +//Copy 8 bit to stream while converting to little endian format. +#define UINT8_TO_STREAM(_p, _val) {*(_p)++ = (_val);} +//Copy 16 bit to stream while converting to little endian format. +#define UINT16_TO_STREAM(_p, _u16) (UINT16_TO_STREAM_f(_p, _u16)) +//Copy 32 bit to stream while converting to little endian format. +#define UINT32_TO_STREAM(_p, _u32) (UINT32_TO_STREAM_f(_p, _u32)) +//Copy a specified value length bits (l) to stream while converting to little endian format. +#define ARRAY_TO_STREAM(p, a, l) {uint32_t _i; for (_i = 0; _i < l; _i++) *(p)++ = ((uint8_t *) a)[_i];} +//Copy received stream to 8 bit in little endian format. +#define STREAM_TO_UINT8(_p, _offset, _u8) {_u8 = (uint8_t)(*(_p + _offset));} +//Copy received stream to 16 bit in little endian format. +#define STREAM_TO_UINT16(_p, _offset, _u16) {_u16 = STREAM_TO_UINT16_f(_p, _offset);} +//Copy received stream to 32 bit in little endian format. +#define STREAM_TO_UINT32(_p, _offset, _u32) {_u32 = STREAM_TO_UINT32_f(_p, _offset);} +#define STREAM_TO_STREAM(p, a, l) {uint32_t _i; for (_i = 0; _i < l; _i++) *(a)++= ((uint8_t *) p)[_i];} + +typedef struct _sockaddr_t +{ + uint16_t family; + uint8_t data[14]; +} sockaddr; + +struct timeval +{ + int32_t tv_sec; /* seconds */ + int32_t tv_usec; /* microseconds */ +}; + +#define SMART_CONFIG_PROFILE_SIZE 67 // 67 = 32 (max ssid) + 32 (max key) + 1 (SSID length) + 1 (security type) + 1 (key length) + +/* patches type */ +#define PATCHES_HOST_TYPE_WLAN_DRIVER 0x01 +#define PATCHES_HOST_TYPE_WLAN_FW 0x02 +#define PATCHES_HOST_TYPE_BOOTLOADER 0x03 + +#define SL_SET_SCAN_PARAMS_INTERVAL_LIST_SIZE (16) +#define SL_SIMPLE_CONFIG_PREFIX_LENGTH (3) +#define ETH_ALEN (6) +#define MAXIMAL_SSID_LENGTH (32) + +#define SL_PATCHES_REQUEST_DEFAULT (0) +#define SL_PATCHES_REQUEST_FORCE_HOST (1) +#define SL_PATCHES_REQUEST_FORCE_NONE (2) + + +#define WLAN_SEC_UNSEC (0) +#define WLAN_SEC_WEP (1) +#define WLAN_SEC_WPA (2) +#define WLAN_SEC_WPA2 (3) + + +#define WLAN_SL_INIT_START_PARAMS_LEN (1) +#define WLAN_PATCH_PARAMS_LENGTH (8) +#define WLAN_SET_CONNECTION_POLICY_PARAMS_LEN (12) +#define WLAN_DEL_PROFILE_PARAMS_LEN (4) +#define WLAN_SET_MASK_PARAMS_LEN (4) +#define WLAN_SET_SCAN_PARAMS_LEN (100) +#define WLAN_GET_SCAN_RESULTS_PARAMS_LEN (4) +#define WLAN_ADD_PROFILE_NOSEC_PARAM_LEN (24) +#define WLAN_ADD_PROFILE_WEP_PARAM_LEN (36) +#define WLAN_ADD_PROFILE_WPA_PARAM_LEN (44) +#define WLAN_CONNECT_PARAM_LEN (29) +#define WLAN_SMART_CONFIG_START_PARAMS_LEN (4) + +#endif