This fork of the MBED Library allows you to use counters on the external counter pins (15/16 for Timer 3, 29/30 for Timer 2) by switching internal timing functions in MBED to utilize Timer 0

Fork of mbed-src by mbed official

targets/hal/TARGET_STM/TARGET_STM32F4XX/PinNames.h

Committer:
mbed_official
Date:
2014-03-21
Revision:
131:5619d5c0521f
Parent:
124:73383cc04afd

File content as of revision 131:5619d5c0521f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

#define STM_PIN_DATA(MODE, FUNC)    (((MODE) << 8) | (FUNC))
#define STM_PIN_MODE(X)             ((X) >> 8)
#define STM_PIN_FUNC(X)             ((X) & 0xFF)

typedef enum {
    PIN_INPUT,
    PIN_OUTPUT
} PinDirection;

#define PORT_SHIFT  6

typedef enum {
    // STM32 Pin Names
    PA_0 = 0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
    PB_0, PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
    PC_0, PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PC_15,
    PD_0, PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PD_15,
    PE_0, PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
    PF_0, PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11, PF_12, PF_13, PF_14, PF_15,
    PH_0, PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,

    LED1        = PD_13,
    LED2        = PD_12,
    LED3        = PD_13,
    LED4        = PD_12,
    LED5        = PD_14,
    LED6        = PD_15,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

typedef enum {
    PullNone = 0,
    PullUp = 1,
    PullDown = 2,
    OpenDrain = 3,
    PullDefault = PullDown
} PinMode;

#ifdef __cplusplus
}
#endif

#endif