Diff: main.cpp

Revision:

0:bd673d937d4a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Wed Jan 28 12:45:04 2015 +0000
@@ -0,0 +1,90 @@
+#include <string.h>
+#include "mbed.h"
+#include "BLEDevice.h"
+
+#include "UARTService.h"
+
+#define DEBUG 1
+
+#if DEBUG
+#define LOG_BUFFER 100
+#define LOG(...)  do { if (uart) {snprintf(debugBuffer, LOG_BUFFER , __VA_ARGS__); uart->write(debugBuffer, strlen(debugBuffer));} } while (0)
+#else
+#define LOG_BUFFER 0
+#define LOG(...) /* nothing */
+#endif /* #if DEBUG */
+
+
+char debugBuffer[LOG_BUFFER];
+BLEDevice  ble;
+UARTService *uart;
+
+PinName pins[] = {P0_0, P0_1, P0_2,P0_3,P0_4,P0_5,P0_6,P0_7,P0_8,P0_9,P0_10,
+P0_11,P0_12,P0_13,P0_14,P0_15,P0_16,P0_17,P0_18,P0_19,P0_20,
+P0_21,P0_22,P0_23,P0_24,P0_25,P0_26,P0_27,P0_28,P0_29,P0_30};
+
+void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason)
+{
+    LOG("Disconnected!\n\r");
+    LOG("Restarting the advertising process\n\r");
+    ble.startAdvertising();
+}
+
+void testPins(){
+        for (int i =0;i<=30;i++){
+            for (int j=i+1;j<=30;j++){
+                DigitalOut output(pins[i]);
+                DigitalIn inup(pins[j],PullUp);
+                output=0;
+                if (inup==0){
+                   output=1;
+                   if (inup==1){
+                        LOG("Check pin %d & %d (PullUp)\n\r",i,j);
+                    } 
+                }
+                DigitalIn indown(pins[j],PullDown);
+                output=1;
+                if (indown==1){
+                   output=0;
+                   if (indown==0){
+                        LOG("Check pin %d & %d (PullDown)\n\r",i,j);
+                    } 
+                }                                    
+            }
+        }
+}
+
+void periodicCallback(void)
+{
+    LOG("Testing...\r\n");
+    testPins();    
+    LOG("Done!!!\r\n");
+}
+
+
+
+int main() {
+    Ticker ticker;
+    ticker.attach(periodicCallback, 5);
+
+    LOG("Initialising the nRF51822\n\r");
+    ble.init();
+    ble.onDisconnection(disconnectionCallback);
+    
+    uart = new UARTService(ble);
+
+    /* setup advertising */
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
+    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
+                                     (const uint8_t *)"BLE UART", sizeof("BLE UART") - 1);
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
+                                     (const uint8_t *)UARTServiceUUID_reversed, sizeof(UARTServiceUUID_reversed));
+
+    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */
+    ble.startAdvertising();
+
+    while (true) {
+        ble.waitForEvent();
+    }
+}