Diff: usbd_ioreq.c

Revision:

1:3a73d77c2cef

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/usbd_ioreq.c	Thu Jun 29 20:11:00 2017 +0000
@@ -0,0 +1,236 @@
+/**
+  ******************************************************************************
+  * @file    usbd_ioreq.c
+  * @author  MCD Application Team
+  * @version V2.3.0
+  * @date    04-November-2014
+  * @brief   This file provides the IO requests APIs for control endpoints.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+  * @{
+  */
+
+
+/** @defgroup USBD_IOREQ 
+  * @brief control I/O requests module
+  * @{
+  */ 
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+  * @{
+  */ 
+
+/**
+* @brief  USBD_CtlSendData
+*         send data on the ctl pipe
+* @param  pdev: device instance
+* @param  buff: pointer to data buffer
+* @param  len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef  USBD_CtlSendData (USBD_HandleTypeDef  *pdev, 
+                               uint8_t *pbuf,
+                               uint16_t len)
+{
+  /* Set EP0 State */
+  pdev->ep0_state          = USBD_EP0_DATA_IN;                                      
+  pdev->ep_in[0].total_length = len;
+  pdev->ep_in[0].rem_length   = len;
+ /* Start the transfer */
+  USBD_LL_Transmit (pdev, 0x00, pbuf, len);  
+  
+  return USBD_OK;
+}
+
+/**
+* @brief  USBD_CtlContinueSendData
+*         continue sending data on the ctl pipe
+* @param  pdev: device instance
+* @param  buff: pointer to data buffer
+* @param  len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef  USBD_CtlContinueSendData (USBD_HandleTypeDef  *pdev, 
+                                       uint8_t *pbuf,
+                                       uint16_t len)
+{
+ /* Start the next transfer */
+  USBD_LL_Transmit (pdev, 0x00, pbuf, len);   
+  
+  return USBD_OK;
+}
+
+/**
+* @brief  USBD_CtlPrepareRx
+*         receive data on the ctl pipe
+* @param  pdev: device instance
+* @param  buff: pointer to data buffer
+* @param  len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef  USBD_CtlPrepareRx (USBD_HandleTypeDef  *pdev,
+                                  uint8_t *pbuf,                                  
+                                  uint16_t len)
+{
+  /* Set EP0 State */
+  pdev->ep0_state = USBD_EP0_DATA_OUT; 
+  pdev->ep_out[0].total_length = len;
+  pdev->ep_out[0].rem_length   = len;
+  /* Start the transfer */
+  USBD_LL_PrepareReceive (pdev,
+                          0,
+                          pbuf,
+                         len);
+  
+  return USBD_OK;
+}
+
+/**
+* @brief  USBD_CtlContinueRx
+*         continue receive data on the ctl pipe
+* @param  pdev: device instance
+* @param  buff: pointer to data buffer
+* @param  len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef  USBD_CtlContinueRx (USBD_HandleTypeDef  *pdev, 
+                                          uint8_t *pbuf,                                          
+                                          uint16_t len)
+{
+
+  USBD_LL_PrepareReceive (pdev,
+                          0,                     
+                          pbuf,                         
+                          len);
+  return USBD_OK;
+}
+/**
+* @brief  USBD_CtlSendStatus
+*         send zero lzngth packet on the ctl pipe
+* @param  pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef  USBD_CtlSendStatus (USBD_HandleTypeDef  *pdev)
+{
+
+  /* Set EP0 State */
+  pdev->ep0_state = USBD_EP0_STATUS_IN;
+  
+ /* Start the transfer */
+  USBD_LL_Transmit (pdev, 0x00, NULL, 0);   
+  
+  return USBD_OK;
+}
+
+/**
+* @brief  USBD_CtlReceiveStatus
+*         receive zero lzngth packet on the ctl pipe
+* @param  pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef  USBD_CtlReceiveStatus (USBD_HandleTypeDef  *pdev)
+{
+  /* Set EP0 State */
+  pdev->ep0_state = USBD_EP0_STATUS_OUT; 
+  
+ /* Start the transfer */  
+  USBD_LL_PrepareReceive ( pdev,
+                    0,
+                    NULL,
+                    0);  
+
+  return USBD_OK;
+}
+
+
+/**
+* @brief  USBD_GetRxCount
+*         returns the received data length
+* @param  pdev: device instance
+* @param  ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint16_t  USBD_GetRxCount (USBD_HandleTypeDef  *pdev , uint8_t ep_addr)
+{
+  return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+  * @}
+  */ 
+
+
+/**
+  * @}
+  */ 
+
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/