Diff: main.cpp

Revision:

0:45714e4b114f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Mar 06 22:01:40 2015 +0000
@@ -0,0 +1,27 @@
+#include "mbed.h"
+ 
+SPISlave spi(PTD2, PTD3, PTD1, PTD10); // mosi, miso, sclk, cs
+Serial pc(USBTX, USBRX); // Configure UART
+PwmOut g_led(LED_GREEN); // Configure Green LED
+ 
+int main() {
+    // Setup the spi for 8 bit data, high steady state clock,
+    // second edge capture, with a 1MHz clock rate
+    spi.format(8,3);
+    spi.frequency(1000000);
+    // Configure PC/Serial Connection
+    pc.baud(9600);
+    
+    while(1)
+    {
+        char receivedValue = 0;
+        if(spi.receive()) { //Poll SPI module to see if a byte has been received
+            receivedValue = spi.read(); // Read Received value
+            if(receivedValue != 0x00) {
+                spi.reply(receivedValue); // Set reply when next byte is received
+                pc.printf("Received Data = 0x%X\n\r",receivedValue); // Output to PC Serial
+                g_led = 1.0f * receivedValue; // Set Green LED to be percentage value
+            }
+        }
+    }
+}