Diff: main.cpp

Revision:

6:8cbc9ca33b30

Parent:

1:025596ffc973

--- a/main.cpp	Fri Feb 12 05:52:56 2021 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,65 +0,0 @@
-#include "mbed.h"
-
-/*
-   This basic example just shows how to read the ADC internal channels raw values.
-   Please look in the corresponding device reference manual for a complete
-   description of how to make a temperature sensor, VBat or Vref measurement.
-*/
-
-AnalogIn adc_temp(ADC_TEMP);
-AnalogIn adc_vref(ADC_VREF);
-/* UD-GS2 H/W define 
- PIO_SWin    PB_4 
- PIO_wkup    PA_4 
- PIO_enable  PB_0
- PIO_intout1 PB_2
- PIO_led     PB_5
- PIO_v20v    PC_13
- PIO_v18v    PH_0
- PIO_intout2 PH_1
- PIO_spics   PB_12
- PIO_battryMonEn   PA_5
-*/
-
-RawSerial         pc(PA_9, PA_10,115200); //console UART
-LowPowerTicker    interrput;
-SPI               STSPI(PB_15, PB_14, PB_13); //mosi,miso,clk
-DigitalOut        STSPICS(PB_12);
-DigitalOut        led(PB_5);
-int initLIS3DH();
-int read3axes(short *tx,short *ty,short *tz);
-int readTemp(short *tmp);
-
-int main()
-{
-    initLIS3DH();
-    short x,y,z,tmp;
- 
-    pc.printf("\nSTM32 ADC internal channels reading example\r\n");
-    while(1) {
-        pc.printf("ADC Temp = %f\r\n", (adc_temp.read()*100));
-        pc.printf("ADC VRef = %f\r\n", adc_vref.read());         
-//        pc.printf("\033[2A");
-
-
-        read3axes(&x,&y,&z);
-        readTemp(&tmp);
-        pc.printf("x=%d y=%d z=%d tmperature=%d\r\n", x,y,z,tmp);         
-        pc.printf("x=%f y=%f z=%f\r\n", (float)x/1024.0f,(float)y/1024.0f,(float)z/1024.0f);         
-        led = !led;
-        wait(1.0);
-    }
-}
-/*********** porting **************/   
-void spiFormat(int b,int m) {
-   STSPI.format(b,m);  /* 8bit */
-}
-void spiFrequency(int f){
-    STSPI.frequency(f); /* 1Mbps */
-}
-void spiWriteCS(int cs) {
-    STSPICS=cs;
-}
-int spiWrite(int wd) {
-    return ( STSPI.write(wd)); 
-}