Hexiwear / Mbed OS Hexi_Timer_Example

Timer program example for Hexiwear

Fork of Hexi_Timer_Example by Hexiwear

This project demonstrates the use of a Hexiwear Serial interface

Open a Hyperterminal tool on your computer and connect it to the "mbed Serial port (COMxx)" with Baud rate "9600bps"

Compile the project and copy the binary "Hexi_Serial_HEXIWEAR.bin" in the DAP-LINK drive from your computer file explorer Press the K64F-RESET button on the docking station to start the program on your board

Message "Hello World!" will appear in the Hyperterminal window Then every 500ms the value of an incremented variable will be displayed and Blue LED will blink accordingly

main.cpp

Committer:
GregC
Date:
2016-08-15
Revision:
0:19c6b2e95531
Child:
1:d1b88d737fc1

File content as of revision 0:19c6b2e95531:

#include "mbed.h"

Timer t;
Serial pc(USBTX, USBRX);

int main()
{
    t.start();
    pc.printf("Hello World!\n");
    t.stop();
    pc.printf("The time taken to boot and display this message was %f seconds\n", t.read());
}