SG RFID nRF51822 fork

Fork of nRF51822 by Nordic Semiconductor

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers ble_bps.h Source File

ble_bps.h

Go to the documentation of this file.
00001 /* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
00002  *
00003  * The information contained herein is property of Nordic Semiconductor ASA.
00004  * Terms and conditions of usage are described in detail in NORDIC
00005  * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
00006  *
00007  * Licensees are granted free, non-transferable use of the information. NO
00008  * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
00009  * the file.
00010  */
00011 
00012 /** @file
00013  *
00014  * @defgroup ble_sdk_srv_bps Blood Pressure Service
00015  * @{
00016  * @ingroup ble_sdk_srv
00017  * @brief Blood Pressure Service module.
00018  *
00019  * @details This module implements the Blood Pressure Service.
00020  *
00021  *          If an event handler is supplied by the application, the Blood Pressure 
00022  *          Service will generate Blood Pressure Service events to the application.
00023  *
00024  * @note The application must propagate BLE stack events to the Blood Pressure Service
00025  *       module by calling ble_bps_on_ble_evt() from the from the @ref ble_stack_handler function.
00026  *
00027  * @note Attention! 
00028  *  To maintain compliance with Nordic Semiconductor ASA Bluetooth profile 
00029  *  qualification listings, this section of source code must not be modified.
00030  */
00031 
00032 #ifndef BLE_BPS_H__
00033 #define BLE_BPS_H__
00034 
00035 #include <stdint.h>
00036 #include <stdbool.h>
00037 #include "ble.h"
00038 #include "ble_srv_common.h "
00039 #include "ble_date_time.h"
00040 
00041 // Blood Pressure Feature bits
00042 #define BLE_BPS_FEATURE_BODY_MOVEMENT_BIT               (0x01 << 0)         /**< Body Movement Detection Support bit. */
00043 #define BLE_BPS_FEATURE_CUFF_FIT_BIT                    (0x01 << 1)         /**< Cuff Fit Detection Support bit. */
00044 #define BLE_BPS_FEATURE_IRREGULAR_PULSE_BIT             (0x01 << 2)         /**< Irregular Pulse Detection Support bit. */
00045 #define BLE_BPS_FEATURE_PULSE_RATE_RANGE_BIT            (0x01 << 3)         /**< Pulse Rate Range Detection Support bit. */
00046 #define BLE_BPS_FEATURE_MEASUREMENT_POSITION_BIT        (0x01 << 4)         /**< Measurement Position Detection Support bit. */
00047 #define BLE_BPS_FEATURE_MULTIPLE_BOND_BIT               (0x01 << 5)         /**< Multiple Bond Support bit. */
00048 
00049 /**@brief Blood Pressure Service event type. */
00050 typedef enum
00051 {
00052     BLE_BPS_EVT_INDICATION_ENABLED,                                         /**< Blood Pressure value indication enabled event. */
00053     BLE_BPS_EVT_INDICATION_DISABLED,                                        /**< Blood Pressure value indication disabled event. */
00054     BLE_BPS_EVT_INDICATION_CONFIRMED                                        /**< Confirmation of a blood pressure measurement indication has been received. */
00055 } ble_bps_evt_type_t;
00056 
00057 /**@brief Blood Pressure Service event. */
00058 typedef struct
00059 {
00060     ble_bps_evt_type_t evt_type;                                            /**< Type of event. */
00061 } ble_bps_evt_t;
00062 
00063 // Forward declaration of the ble_bps_t type. 
00064 typedef struct ble_bps_s ble_bps_t;
00065 
00066 /**@brief Blood Pressure Service event handler type. */
00067 typedef void (*ble_bps_evt_handler_t) (ble_bps_t * p_bps, ble_bps_evt_t * p_evt);
00068 
00069 /**@brief SFLOAT format (IEEE-11073 16-bit FLOAT, defined as a 16-bit vlue with 12-bit mantissa and
00070  *        4-bit exponent. */
00071 typedef struct
00072 {
00073   int8_t  exponent;                                                         /**< Base 10 exponent, only 4 bits */
00074   int16_t mantissa;                                                         /**< Mantissa, only 12 bits */
00075 } ieee_float16_t;
00076 
00077 /**@brief Blood Pressure Service init structure. This contains all options and data
00078  *        needed for initialization of the service. */
00079 typedef struct
00080 {
00081     ble_bps_evt_handler_t        evt_handler;                               /**< Event handler to be called for handling events in the Blood Pressure Service. */
00082     ble_srv_cccd_security_mode_t bps_meas_attr_md;                          /**< Initial security level for blood pressure measurement attribute */
00083     ble_srv_security_mode_t      bps_feature_attr_md;                       /**< Initial security level for blood pressure feature attribute */
00084     uint16_t                     feature;                                   /**< Initial value for blood pressure feature */
00085 } ble_bps_init_t;
00086 
00087 /**@brief Blood Pressure Service structure. This contains various status information for
00088  *        the service. */
00089 typedef struct ble_bps_s
00090 {
00091     ble_bps_evt_handler_t        evt_handler;                               /**< Event handler to be called for handling events in the Blood Pressure Service. */
00092     uint16_t                     service_handle;                            /**< Handle of Blood Pressure Service (as provided by the BLE stack). */
00093     ble_gatts_char_handles_t     meas_handles;                              /**< Handles related to the Blood Pressure Measurement characteristic. */
00094     ble_gatts_char_handles_t     feature_handles;                           /**< Handles related to the Blood Pressure Feature characteristic. */
00095     uint16_t                     conn_handle;                               /**< Handle of the current connection (as provided by the BLE stack, is BLE_CONN_HANDLE_INVALID if not in a connection). */
00096     uint16_t                     feature;                                   /**< Value of Blood Pressure feature. */
00097 } ble_bps_t;
00098 
00099 /**@brief Blood Pressure Service measurement structure. This contains a Blood Pressure
00100  *        measurement. */
00101 typedef struct ble_bps_meas_s
00102 {
00103     bool                         blood_pressure_units_in_kpa;               /**< Blood Pressure Units Flag, 0=mmHg, 1=kPa */
00104     bool                         time_stamp_present;                        /**< Time Stamp Flag, 0=not present, 1=present. */
00105     bool                         pulse_rate_present;                        /**< Pulse Rate Flag, 0=not present, 1=present. */
00106     bool                         user_id_present;                           /**< User ID Flag, 0=not present, 1=present. */
00107     bool                         measurement_status_present;                /**< Measurement Status Flag, 0=not present, 1=present. */
00108     ieee_float16_t               blood_pressure_systolic;                   /**< Blood Pressure Measurement Compound Value - Systolic. */
00109     ieee_float16_t               blood_pressure_diastolic;                  /**< Blood Pressure Measurement Compound Value - Diastolic . */
00110     ieee_float16_t               mean_arterial_pressure;                    /**< Blood Pressure Measurement Compound Value - Mean Arterial Pressure. */
00111     ble_date_time_t              time_stamp;                                /**< Time Stamp. */
00112     ieee_float16_t               pulse_rate;                                /**< Pulse Rate. */
00113     uint8_t                      user_id;                                   /**< User ID. */
00114     uint16_t                     measurement_status;                        /**< Measurement Status. */
00115 } ble_bps_meas_t;
00116 
00117 /**@brief Function for initializing the Blood Pressure Service.
00118  *
00119  * @param[out]  p_bps       Blood Pressure Service structure. This structure will have to
00120  *                          be supplied by the application. It will be initialized by this function,
00121  *                          and will later be used to identify this particular service instance.
00122  * @param[in]   p_bps_init  Information needed to initialize the service.
00123  *
00124  * @return      NRF_SUCCESS on successful initialization of service, otherwise an error code.
00125  */
00126 uint32_t ble_bps_init(ble_bps_t * p_bps, const ble_bps_init_t * p_bps_init);
00127 
00128 /**@brief Function for handling the Application's BLE Stack events.
00129  *
00130  * @details Handles all events from the BLE stack of interest to the Blood Pressure Service.
00131  *
00132  * @param[in]   p_bps      Blood Pressure Service structure.
00133  * @param[in]   p_ble_evt  Event received from the BLE stack.
00134  */
00135 void ble_bps_on_ble_evt(ble_bps_t * p_bps, ble_evt_t * p_ble_evt);
00136 
00137 /**@brief Function for sending blood pressure measurement if indication has been enabled.
00138  *
00139  * @details The application calls this function after having performed a Blood Pressure
00140  *          measurement. If indication has been enabled, the measurement data is encoded and
00141  *          sent to the client.
00142  *
00143  * @param[in]   p_bps       Blood Pressure Service structure.
00144  * @param[in]   p_bps_meas  Pointer to new blood pressure measurement.
00145  *
00146  * @return      NRF_SUCCESS on success, otherwise an error code.
00147  */
00148 uint32_t ble_bps_measurement_send(ble_bps_t * p_bps, ble_bps_meas_t * p_bps_meas);
00149 
00150 /**@brief Function for checking if indication of Blood Pressure Measurement is currently enabled.
00151  *
00152  * @param[in]   p_bps                  Blood Pressure Service structure.
00153  * @param[out]  p_indication_enabled   TRUE if indication is enabled, FALSE otherwise.
00154  *
00155  * @return      NRF_SUCCESS on success, otherwise an error code.
00156  */
00157 uint32_t ble_bps_is_indication_enabled(ble_bps_t * p_bps, bool * p_indication_enabled);
00158 
00159 #endif // BLE_BPS_H__
00160 
00161 /** @} */