File content as of revision 3:7b0c215eb6a7:

#include "mbed.h"

DigitalOut myled(LED1);
Serial pc(USBTX, USBRX);

I2C camera1(p9, p10);

//initial camera data
int IRsensorAddress = 0xB0;
int slaveAddress;
char data_buf[16];
char s;
int i;


//point variables
int point1x = 0;
int point1y = 0;
int point2x = 0;
int point2y = 0;
int point3x = 0;
int point3y = 0;
int point4x = 0;
int point4y = 0;



//sensitivity
//Level 5: p0 = 0x96, p1 = 0xFE, p2 = 0xFE, p3 = 0x05
int sen0 = 0x96;
int sen1 = 0xFE;
int sen2 = 0xFE;
int sen3 = 0x00;

//matrices of x and y coordinates
int onex[4];
int oney[4];


void write2bytes(char data1, char data2){
    char out[2];
    out[0] = data1;
    out[1] = data2;
    camera1.write(slaveAddress, out, 2);
    wait(0.01);   
}

void initCamera(void){
  // Initialize WiiMote Camera
    write2bytes(0x30, 0x01); 
    write2bytes(0x00, 0x02); 
    write2bytes(0x00, 0x00); 
    write2bytes(0x71, 0x01); 
    write2bytes(0x00, sen0); 
    write2bytes(0x07, 0x00); 
    write2bytes(sen1, 0x1A);
    write2bytes(sen2, sen3); 
    write2bytes(0x33, 0x03); 
    write2bytes(0x30, 0x08);
    //wait(0.1);

}

void readCameraData(void){
        
    //request data from camera 
    char out[1];
    out[0] = 0x36;   
    camera1.write(slaveAddress, out, 1);
    //wait(0.2); //do we need this?
    
    //get data from camera
    camera1.read(slaveAddress, data_buf, 16);
    
//    //print content of data buffer
//    for(int i = 0; i < 16; i++){
//        pc.printf(" data buf %d --> %c <--    \t as int --> %d <--\n", i, data_buf[i], (float) data_buf[i]);
//        
//    }
   
       
    
    //POINT 1
    //get data
    point1x = data_buf[1];
    point1y = data_buf[2];
    s = data_buf[3];
    //load x,y    
    onex[0] = point1x + ((s & 0x30) << 4);
    oney[0] = point1y + ((s & 0xC0) << 2);
    
    //POINT 2
    //get data
    point2x = data_buf[4];
    point2y = data_buf[5];
    s = data_buf[6];
    //load x,y
    onex[1] = point2x + ((s & 0x30) << 4);
    oney[1] = point2y + ((s & 0xC0) << 2);
      
    //POINT 3
    //get data
    point3x = data_buf[7];
    point3y = data_buf[8];
    s = data_buf[9];
    //load x,y
    onex[2] = point3x + ((s & 0x30) << 4);
    oney[2] = point3y + ((s & 0xC0) << 2);
    
    //POINT 4
    //get data
    point4x = data_buf[10];
    point4y = data_buf[11];
    s = data_buf[12];
    //load x,y
    onex[3] = point4x + ((s & 0x30) << 4);
    oney[3] = point4y + ((s & 0xC0) << 2);
    
}

void printCamData(int xcor[4], int ycor[4]){
    for(int i = 0; i<4; i++){
        int x = xcor[i];
        int y = ycor[i];
        //determine what to print
        //x coordinate
        pc.printf(" %d,", x);
        
        //y coordinate
        pc.printf(" %d\t", y);  
    }
    
    //new line and delay
    pc.printf("\n");      
    //wait(0.01);
}

int main() {
    myled = 0;
    //slaveAddress = IRsensorAddress >> 1;
    slaveAddress = IRsensorAddress;
    initCamera();
    
    //update baud rate
    pc.baud(115200);
    
    
    while(1) {
        wait(0.01);
        myled = 1 - myled;
        
        //get the camera data
        readCameraData();
        
        //print points
        printCamData(onex, oney);  
        
    }
}