![](/media/cache/group/default_image.jpg.50x50_q85.jpg)
This is a very simple guide, reviewing the steps required to get Blinky working on an Mbed OS platform.
Dependencies: mbed Adafruit_GFX
Diff: README.md
- Revision:
- 84:9b22d3bf66f7
- Parent:
- 83:7b0fac4e7fd2
- Child:
- 85:b4c5dbbf74e3
diff -r 7b0fac4e7fd2 -r 9b22d3bf66f7 README.md --- a/README.md Fri Nov 30 23:45:02 2018 +0000 +++ b/README.md Thu Dec 13 14:15:02 2018 +0000 @@ -114,7 +114,7 @@ The default baud rate for this application is set to `115200` and may be modified in the `mbed_app.json` file. -You can find more information on the Mbed OS configuration tools and serail communication in Mbed OS in the related [related links section](#related-links). +You can find more information on the Mbed OS configuration tools and serial communication in Mbed OS in the related [related links section](#related-links). The output should contain the following block transmitted at the blinking LED frequency (actual values may vary depending on your target, build profile, and toolchain):